Fwxv 999 ryan rahman 103 hw

--platform=x86

@@ -0,0 +1,4 @@
+scons: Reading SConscript files ...
+scons: done reading SConscript files.
+scons: Building targets ...
+scons: building terminated because of errors.

projects/hello_world/README.md

@@ -0,0 +1,15 @@
+<!--
+General guidelines
+These are just guidelines, not strict rules - document however seems best.
+A README for a firmware-only project (e.g. Babydriver, MPXE, bootloader, CAN explorer) should answer the following questions:
+    - What is it?
+    - What problem does it solve?
+    - How do I use it? (with usage examples / example commands, etc)
+    - How does it work? (architectural overview)
+A README for a board project (powering a hardware board, e.g. power distribution, centre console, charger, BMS carrier) should answer the following questions:
+    - What is the purpose of the board?
+    - What are all the things that the firmware needs to do?
+    - How does it fit into the overall system?
+    - How does it work? (architectural overview, e.g. what each module's purpose is or how data flows through the firmware)
+-->
+# hello_world

projects/hello_world/config.json

@@ -0,0 +1,7 @@
+{
+    "libs": [
+        "FreeRTOS",
+        "ms-common",
+        "master"
+    ]
+}

projects/hello_world/src/main.c

@@ -0,0 +1,10 @@
+#include <stdio.h>
+
+#include "log.h"
+//#include "master_task.h"
+//#include "tasks.h"
+
+int main() {
+  LOG_DEBUG("Hello World \n");
+  return 0;
+}

projects/task1/README.md

@@ -0,0 +1,15 @@
+<!--
+General guidelines
+These are just guidelines, not strict rules - document however seems best.
+A README for a firmware-only project (e.g. Babydriver, MPXE, bootloader, CAN explorer) should answer the following questions:
+    - What is it?
+    - What problem does it solve?
+    - How do I use it? (with usage examples / example commands, etc)
+    - How does it work? (architectural overview)
+A README for a board project (powering a hardware board, e.g. power distribution, centre console, charger, BMS carrier) should answer the following questions:
+    - What is the purpose of the board?
+    - What are all the things that the firmware needs to do?
+    - How does it fit into the overall system?
+    - How does it work? (architectural overview, e.g. what each module's purpose is or how data flows through the firmware)
+-->
+# task1

projects/task1/config.json

@@ -0,0 +1,6 @@
+{
+    "libs": [
+        "FreeRTOS",
+        "ms-common"
+    ]
+}

projects/task1/src/queues1.c

@@ -0,0 +1,82 @@
+#include <stdbool.h>
+#include <stdint.h>
+
+#include "FreeRTOS.h"
+#include "tasks.h"
+#include "queues.h"
+#include "status.h"
+#include "delay.h"
+
+#include "log.h"
+#include "misc.h"
+
+
+#define ITEM_SZ 6
+#define QUEUE_LEN 5
+#define BUF_SIZE (QUEUE_LEN * ITEM_SZ)
+
+static const char s_list[QUEUE_LEN][ITEM_SZ] = {
+	"Item1",
+	"Item2",
+	"Item3",
+	"Item4",
+	"Item5"
+};
+
+// Task static entities
+static uint8_t s_queue1_buf[BUF_SIZE];
+static Queue s_queue1 = {
+  // Add parameters
+  .num_items = QUEUE_LEN,
+  .item_size = ITEM_SZ,
+  .storage_buf = s_queue1_buf,
+};
+
+
+TASK(task1, TASK_STACK_512) {
+  LOG_DEBUG("Task 1 initialized!\n");
+  StatusCode ret = STATUS_CODE_OK;
+  uint32_t to_send = 0;
+  while (to_send < 6) {
+    // Your code goes here
+    ret = queue_send(&s_queue1, &s_list[to_send], 0);
+    delay_ms(100);
+    to_send++;
+    if (ret != STATUS_CODE_OK){
+      LOG_DEBUG("write to queue failed");
+    }
+  }
+}
+
+TASK(task2, TASK_STACK_512) {
+  LOG_DEBUG("Task 2 initialized!\n");
+  char outstr[ITEM_SZ];
+  uint32_t to_recieve = 0;
+  StatusCode ret = STATUS_CODE_OK;
+  while (to_recieve<5) {
+    // Your code goes here
+    ret = queue_receive(&s_queue1, &outstr, 1000);
+    delay_ms(100);
+    LOG_DEBUG("Received: %s\n", outstr);
+    if (ret != STATUS_CODE_OK){
+      LOG_DEBUG("read from queue failed");
+    }
+    to_recieve ++;
+  }
+}
+
+int main(void) {
+
+  log_init();
+  // Initialize queues here
+  tasks_init();
+  queue_init(&s_queue1);
+
+  tasks_init_task(task1, TASK_PRIORITY(2), NULL);
+  tasks_init_task(task2, TASK_PRIORITY(2), NULL);
+
+  LOG_DEBUG("Program start...\n");
+  tasks_start();
+
+  return 0;
+}

projects/task1/src/tasks/tasks.c

@@ -0,0 +1,53 @@
+#include <stdbool.h>
+#include <stdint.h>
+
+#include "FreeRTOS.h"
+#include "tasks.h"
+
+#include "gpio.h"
+#include "log.h"
+#include "misc.h"
+#include "delay.h"
+
+// Non blocking delay. Simply consumes cpu cycles until a given time has passed
+static void prv_delay(const TickType_t delay_ms) {
+  TickType_t curr_tick = xTaskGetTickCount();
+  while(xTaskGetTickCount() - curr_tick < pdMS_TO_TICKS(delay_ms))
+  {}
+}
+
+TASK(task1, TASK_STACK_512) {
+  int counter1 = 0;
+  while (true) {
+  // Your code here
+  LOG_DEBUG("task1 \t");
+  LOG_DEBUG("%d \n",counter1);
+  counter1 ++;
+  delay_ms(1000);
+  }
+}
+
+TASK(task2, TASK_STACK_512) {
+  int counter2 = 0;
+  while (true) {
+  // Your code here
+  LOG_DEBUG("task2 \t");
+  LOG_DEBUG("%d \n",counter2);
+  counter2 ++;
+  prv_delay(1000);
+  }
+}
+
+int main(void) {
+    log_init();
+    // Create tasks here
+    tasks_init();
+    tasks_init_task(task1,TASK_PRIORITY(2),NULL);
+    tasks_init_task(task2,TASK_PRIORITY(1),NULL);
+
+    LOG_DEBUG("Program start...\n");
+    // Start the scheduler
+    tasks_start();
+
+    return 0;
+}