Fwxv 999 rodney 102 hw

projects/hello_world/README.md

@@ -0,0 +1,15 @@
+<!--
+General guidelines
+These are just guidelines, not strict rules - document however seems best.
+A README for a firmware-only project (e.g. Babydriver, MPXE, bootloader, CAN explorer) should answer the following questions:
+    - What is it?
+    - What problem does it solve?
+    - How do I use it? (with usage examples / example commands, etc)
+    - How does it work? (architectural overview)
+A README for a board project (powering a hardware board, e.g. power distribution, centre console, charger, BMS carrier) should answer the following questions:
+    - What is the purpose of the board?
+    - What are all the things that the firmware needs to do?
+    - How does it fit into the overall system?
+    - How does it work? (architectural overview, e.g. what each module's purpose is or how data flows through the firmware)
+-->
+# hello_world

projects/hello_world/config.json

@@ -0,0 +1,7 @@
+{
+    "libs": [
+        "FreeRTOS",
+        "ms-common",
+        "master"
+    ]
+}

projects/hello_world/src/main.c

@@ -0,0 +1,41 @@
+
+// #include <stdio.h>
+
+#include "log.h"
+// #include "master_task.h"
+// #include "tasks.h"
+
+// void pre_loop_init() {}
+
+// void run_fast_cycle() {}
+
+// void run_medium_cycle() {}
+
+// void run_slow_cycle() {}
+
+void increment(int *input) { 
+  (*input)++;
+}
+
+
+int main() {
+
+  // tasks_init();
+  // log_init();
+  // LOG_DEBUG("Welcome to TEST!");
+
+  // init_master_task();
+
+  // tasks_start();
+
+  int my_int = 0;
+
+  LOG_DEBUG("Before entering main loop");
+
+  while(true){
+    increment(&my_int);
+    LOG_DEBUG("Hello World %d\n", my_int);
+  }
+
+  return 0;
+}

projects/task1/README.md

@@ -0,0 +1,15 @@
+<!--
+General guidelines
+These are just guidelines, not strict rules - document however seems best.
+A README for a firmware-only project (e.g. Babydriver, MPXE, bootloader, CAN explorer) should answer the following questions:
+    - What is it?
+    - What problem does it solve?
+    - How do I use it? (with usage examples / example commands, etc)
+    - How does it work? (architectural overview)
+A README for a board project (powering a hardware board, e.g. power distribution, centre console, charger, BMS carrier) should answer the following questions:
+    - What is the purpose of the board?
+    - What are all the things that the firmware needs to do?
+    - How does it fit into the overall system?
+    - How does it work? (architectural overview, e.g. what each module's purpose is or how data flows through the firmware)
+-->
+# task1

projects/task1/config.json

@@ -0,0 +1,6 @@
+{
+    "libs": [
+        "FreeRTOS",
+        "ms-common"
+    ]
+}

projects/task1/src/main.c

@@ -0,0 +1,47 @@
+#include <stdbool.h>
+#include <stdint.h>
+
+#include "FreeRTOS.h"
+#include "tasks.h"
+
+#include "gpio.h"
+#include "log.h"
+#include "misc.h"
+#include "delay.h"
+
+// Non blocking delay. Simply consumes cpu cycles until a given time has passed
+static void prv_delay(const TickType_t delay_ms) {
+  vTaskDelay(pdMS_TO_TICKS(delay_ms));
+}
+
+TASK(task1, TASK_STACK_512) {
+  int counter1 = 0;
+  while (true) {
+    LOG_DEBUG("Task1 %d\n", counter1);
+    counter1++;
+    prv_delay(1000);
+  }
+}
+
+TASK(task2, TASK_STACK_512) {
+  int counter2 = 0;
+  while (true) {
+    LOG_DEBUG("Task2 %d\n", counter2);
+    counter2++;
+    prv_delay(1000);
+  }
+}
+
+int main(void) {
+    log_init();
+    tasks_init();
+
+    LOG_DEBUG("Program start...\n");
+
+    tasks_init_task(task1, TASK_PRIORITY(2), NULL);
+    tasks_init_task(task2, TASK_PRIORITY(3), NULL);
+
+    tasks_start();
+
+    return 0;
+}

projects/task2/src/main.c

@@ -0,0 +1,91 @@
+#include <stdbool.h>
+#include <stdint.h>
+
+#include "FreeRTOS.h"
+#include "tasks.h"
+#include "queues.h"
+#include "status.h"
+#include "delay.h"
+
+#include "log.h"
+#include "misc.h"
+
+
+#define ITEM_SZ 6
+#define QUEUE_LEN 5
+#define BUF_SIZE (QUEUE_LEN * ITEM_SZ)
+
+
+static const char s_list[QUEUE_LEN][ITEM_SZ] = {
+	"Item1",
+	"Item2",
+	"Item3",
+	"Item4",
+	"Item5"
+};
+
+// Task static entities
+static uint8_t s_queue1_buf[BUF_SIZE];
+
+static Queue s_queue1 = {
+  .num_items = QUEUE_LEN,
+  .item_size = ITEM_SZ,
+  .storage_buf = s_queue1_buf,
+};
+
+
+TASK(task1, TASK_STACK_512) {
+  LOG_DEBUG("Task 1 initialized!\n");
+  StatusCode ret;
+  int index = 0;
+
+  while (true) {
+
+    if (index < QUEUE_LEN){
+      ret = queue_send(&s_queue1, &s_list[index], 0);
+    }
+
+    if (ret != STATUS_CODE_OK || index >= QUEUE_LEN){
+      LOG_DEBUG("write to queue failed\n");
+    }
+
+    delay_ms(1000);
+
+    index++;
+
+  }
+}
+
+TASK(task2, TASK_STACK_512) {
+  LOG_DEBUG("Task 2 initialized!\n");
+  char outstr[ITEM_SZ];
+  StatusCode ret;
+
+  while (true) {
+
+    ret = queue_receive(&s_queue1, &outstr, 0);
+
+    delay_ms(1000);
+
+    if (ret == STATUS_CODE_OK){
+      LOG_DEBUG("%s\n", outstr);
+    }else{
+      LOG_DEBUG("read from queue failed\n");
+    }
+
+  }
+}
+
+int main(void) {
+  log_init();
+  tasks_init();
+  queue_init(&s_queue1);
+
+  tasks_init_task(task1, TASK_PRIORITY(2), NULL);
+  tasks_init_task(task2, TASK_PRIORITY(2), NULL);
+
+  LOG_DEBUG("Program start...\n");
+  tasks_start();
+
+  return 0;
+}