Skip to content

GettingStarted: SAMD21 Xplained Pro

Jump to bottom
Thibaut VIARD edited this page Mar 20, 2017 · 4 revisions

1. Prerequisites

To learn how to install this module, see HowTo - Install this module.

2. Prepare the board

2.1. Connect USB cable

Connect a micro USB cable from host computer to the USB Debug port of the kit, as described below:

Connect board to computer

2.2. Burn bootloader

Screenshot of burn bootloader

2.3. Compile and upload Blink sketch

Select blink example coming with SAMD21-XPRO package, this will open a new IDE window.

Screenshot of open blink sketch

Verify and Upload on board the sketch binary. At this point, you should see the board LED blinking.

3. Moving forward

You can now either select an example from the ones listed in Examples submenu or create your own sketch/application.

atmel_university_logo

Clone this wiki locally