Sensor: ANALOG JOYSTICK SENSOR
| What | Comments | |
|---|---|---|
| Interface | 2 ADC 1 GPIO |
ADC 1: X attached at ADC 2: Y attached at GPIO : SW attached at |
| Read () from sensor When () changes from sensor |
x | -1: left movement 0: no movement 1: right movement |
| y | -1: up movement 0: no movement 1: down movement |
|
| sw | 0: switch released 1: switch pressed |
Hardware pull-ups are not required for switch.
The Whitecat IDE is free for you, but funds are required for make it possible. Feel free to donate as little or as much as you wish. Every donation is very much appreciated.
