Skip to content

All GROMACS/NAMD initializing files for generating initial structures for polydisperse chains with a set of residues desired by the user. With LigninBuilder, all lignin topologies can be built directly.

Notifications You must be signed in to change notification settings

vaidyanathanms/SPRInG_PolydispersePolymerBuilder

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 

Repository files navigation

Simple Polydisperse Residue Input Generator (SPRIG)

Author: Vaidyanathan M. Sethuraman.

ver_1.2: Nov-05-2021

If you find this software useful, please cite it in your work as Sethuraman et al., Atomistic Simulations of Polydisperse Lignin Melts Using Simple Polydisperse Residue Input Generator, Biomacromolecules (2023) Citation.

A Python/FORTRAN-90 based code to generate random initial structures for polydisperse monomers/residues according to Schulz-Zimm distribution or from an experimental molecular weight distribution.

In conjunction with LigninBuilder, users can generate generate starting .psf, .pdb and .top files for running with NAMD or GROMACS software.

Although this code was primarily designed to generate input files for various types of biomass (Lignin/Carbohydrates), it can be used with any protein or polymer complex with the forcefield files.

Input Requirements

This code works on a combination of Python and FORTRAN90 platforms. Python3.0+ and ifort/gfortran compilers are required.

Installation

Dowloading and unzipping the directory can be done using:

git clone https://github.com/vaidyanathanms/SPRInG_PolydispersePolymerBuilder.git

The above commands should generate a folder of the name:

  • generic_builder

Navigate to generic_builder for generating a structure from scratch using

cd generic_builder

. Inside generic_builder folder, you should see the following python and FORTRAN files:

  • make_genpsf.py
  • genconf.py
  • pdi_gen.f90
  • pdi_dist_params.f90

If the files are present, you are set to generate a new structure. There are two ways to generate initial structure. You can either copy the four files above to a new folder or run from the directory generic_builder.

Making Inputs to SPRIG

inputsforpsfgen.inp is a sample input file containing all the input keywords to SPRIG. We will look at the keywords in detail in the SPRIG Keywords section. For running SPRIG, use:

python genconf.py <filename>

where <filename> is the name of the input file to genconf.py. If this generates a folder with casenum_ID and sub-folder all_tclfiles (within casenum_ID) which contain a number of tcl files, you are all set. Here, ID refers to an integer value given as input (see SPRIG Keywords).

Several things can go wrong including compiler compatibilities and incompatible input constraints (see SPRIG Keywords). If you find an error, please report to Vaidyanathan M. Sethuraman.

Combining SPRIG with LigninBuilder to Generate Structures

Outputs from SPRIG can be directly fed into LigninBuilder to generate the input structure for GROMACS using the following three steps. Make sure to follow the order.

  1. Step 1: If SPRIG ran correctly, users should see a folder casenum_ID, where ID is an integer value given as input to SPRIG (see SPRIG Keywords). Navigate to this directory using

    cd <casenum_ID>
    

    Inside the folder users should see several files viz.,

    • step1.tcl
    • step2.tcl
    • patchlist_ID.tcl, reslist_ID.tcl
    • log_ID.txt
    • step3.tcl (Optional)

    where ID corresponds to the casenum_ID. The directory will also contain the user specified input files for the residue/patch probabilities. If all of these files are present, Step 1 is complete.

  2. Step 2: Execute the following from command terminal:

    vmd -dispdev text -e step1.tcl
    

    Make sure the path to vmd is added to $BIN or is given correctly.

    Alternatively, users can open VMD and open Tk Console and issue

    source step1.tcl

    If either of the commands run smoothly, this should generate psf files for each chain structure. This should also generate pdb files corresponding to the psf files within the directory. This requires LigninBuilder to be added in ~\.vmdrc (see LigninBuilder on how to do this).

    Following the generation of psf`pdb` files, from command terminal, issue

    vmd -dispdev text -e step2.tcl
    

    OR

    from Tk Console in VMD issue

    source step2.tcl

    This should provide output files of the form inpfile_nch_N.psf,inpfile_nch_N.pdb where inpfile is the name of the input system (see SPRIG Keywords) and N corresponds to the number of chains in the system. If LigninBuilder flag is ON, it should also generate an output top file of the form inpfile_nch_N.top. Make sure the prm file is in the folder (casenum_ID) for generating top files.

    If the pdb file(s) is (are) not generated, please see the input constraints. Most likely a particular residue (or patch) is incompatible. Please make sure that LigninBuilder is added to ~\.vmdrc before executing this command.

  3. Step 3: If the intent of the user is to generate an initial structure which do not have overlapping atoms, then the minimizestructure module in LigninBuilder is necessary. To this end, issue from command line,

    vmd -dispdev text -e step3.tcl 
    

    OR

    from Tk Console in VMD issue

    source step3.tcl

    For some cases, the codes would require to use findmissingterms.py in LigninBuilder (see LigninBuilder module for more details). If the run is succesful, this will generate a pdb and psf file which are compatible with GROMACS/NAMD

NOTE: It is the user's responsibility to check whether the parameters match the atomnames (atomtypes) in the psf/pdb files.

SPRIG Keywords

In this section, we look at the different keywords that are needed to generate a polydisperse input structure.

Rules for input file

  • Some keywords are optional and are prefixed with (Optional) while introducing the keyword.
  • A space/tab should be present between the keywords and arguments or between arguments.
  • A new line can start with an optional #. These lines will be ignored. However, # cannot be used in the middle of a line.
  • The input file name (and file names used as arguments) cannot be specified as None or none. These are reserved keywords within the program.

Keyword list

  1. case_num (Optional)

    All input files can start with an optional case_num keyword. If this is used as a keyword, it should be the first keyword in the input file. Usage:

    case_num caseID
    

    caseID should be a positive integer. This will create a folder of the name casenum_caseID where all the output files will be present. Default value for caseID is 1.

    Example:

    case_num 1
    
  2. biomass_type

    This is a mandatory keyword and corresponds to the prefix for output file. Usage:

    biomass_type argname
    

    The final tcl files generated will be of the form argname_1_nch.tcl, where nch` corresponds to number of chains in the system.

    Example:

    biomass_type switchgrass
    
  3. num_resids

    This is a mandatory keyword and corresponds to the average number of residues per chain (segment). Usage:

    num_resids nres
    

    where nres corresponds to the average number of residues per chain (segments or monomers per chain). Should be an integer value.

    Example:

    num_resids 20
    
  4. num_chains

    Mandatory keyword corresponding to the number of chains in the system. Usage:

    num_chains nch
    

    where nch corresponds to the number of chains in the system (integer value).

    Example:

    num_chains 10
    
  5. disperse (Optional)

    This keyword dictates the polydispersity of the system. If this option is not provided, chains are assumed as monodisperse by default. If the option is provided, chains will be drawn from a Schulz-Zimm distribution. There are two options (and suboptions) for this case. Usage:

    disperse maketype optkeywords optargs
    

    maketype can be either SZTHEORY, EXPTDATA or READDATA.

    SZTHEORY generates a set of polydisperse chains using theoretical Schulz-Zimm distribution (see below for options).

    EXPTDATA generates a set of polydisperse chains according to the experimental data (curves) for the molecular weight distribution of chains (see below).

    READDATA reads a file containing the molecular weights (degree of polymerization) of all the chains from a file (see below for format). Arguments for each option are elaborated below.

    Examples:

    disperse SZTHEORY 1.50 polydisp.inp 10000
    disperse sztheory 1.50 polydisp.inp 1000 pditol 8.0 mwrange 20
    disperse readdata molwtdata.dat
    disperse exptdata exptdata.dat mwmonomer 180 ntrials 20
    disperse EXPTDATA WTdata.dat mwmonomer 200 ntrials 1000 pditol 3
    
    • SZTHEORY For this case a new file will be generated according to the polydispersity value and the number of chains/number of residues per chain using a Schulz-Zimm distribution. Usage for this option is as follows:

      disperse sztheory PDIval Outputfile ntrials pditol tolerance distrange rangeval
      

      PDIval and Outputfile corresponds to the target polydispersity value and the output file containing the molecular weights (degree of polymerization) of each chain. PDIval is the target dispersity index and is defined as the ratio between the weight average molecular weight and number average molecular weight. This number *should be greater than 1.0. Outputfile is the name of the file that is generated where the degree of polymerization of each chain is written out. ntrials correspond to the number of trials the program attempts to generate the polymer chains within the PDI tolerance limit. Values between 1000-10000 should be enough for most cases.

      With the pditol keyword, user can also specify an optional tolerance value (0-100). This corresponds to the maximum relative error (in %) between the target PDI value and the simulated PDI. Different combinations will be tried to obtain either the target PDI value of the system. Default value is 5. For all practical purposes values between 5 and 15 yield good output distribution if the number of chains in the system is less than 20. This keyword and the corresponding argument is optional.

      With the distrange keyword, user can specify the maximum range of molecular weights that will be used to create the Schulz-Zimmm distribution. Plot the theoretical curve to see where the distribution tapers to zero. Most likely the default value of 5 would suffice. This keyword and the corresponding argument is optional.

      If this option is used, after running the program, a file with the name 'geninp_pdistruct.txt' will be generated and it will contain the details of the inputs.

    • EXPTDATA With this option, users can input the molecular weight distribution obtained from experiments. The program then uses this molecular weight distribution data to generate chains for simulations. Usage:

      disperse EXPTDATA inpfilename mwmonomer 200 ntrials 1000 pditol 3
      

      where inpfilename corresponds to the molecular weight distribution data file. The inpfilename should contain only two columns of data. Further, one of the columns should have a header molwt which corresponds to the molecular weights of the sample distribution.

      For the second column, the code accepts one of the following three options: wlogmw, wmw, or pmw.

      wlogmw corresponds to the distribution data (w(logM) = dm/dlog(M)); where m is the total mass and M is the molecular weight of the chains. wmw corresponds to the distribution data (w(M) = dm/dM = dm/(M*dlog(M)) = w(logM)/M). wmw is the weight averaged probability distribution. pmw corresponds to the number averaged probability distribution and is related to the other quantities through, p(M) = w(M)/M = w(logM)/$M^2$

      Users should input only one of the above three options for the distribution. Most likely, experimental data are reported in w(logM), wheras other options are more common in theory/computation literature.

      Keywords mwmonomer, ntrials and pditol are optional. mwmonomer corresponds to the average molecular weight of one monomer in g/mol. Default value is 200 g/mol. ntrials corresponds to the number of attempts, random samples are drawn from the experimental distribution before both the average number molecular mass and the PDI converges to a tolerance of pditol of the experimental distribution. pditol is the relative tolerance in % (between 0 and 100%). Default values for ntrials and pditol are 100000 and 5%, respectively.

    • READDATA Users can also specify a file where the degree of polymerization of each chain is specified. In this case, the program will directly read this file and create the segments. Usage:

      disperse READDATA inpfilename
      

      where inpfilename is the name of the file. The inpfilename should have the following structure. First line *should have the following structure:

      num_chains nchains
      

      where nchains correspond to the number of chains in the system. This should be consistent with the num_chains in the input file used to run genconf.py. The next n lines should correspond to the degree of polymerization of the n different chains.

  6. top_ipfile

    Mandatory keyword and the argument corresponds to the path to the topology file. It is the user's responsibility to check whether the residues generated have their monomer structure in the topology file. User should also provide the full path to the topology file. Default assumption is that the file is present in the path from which genconf.py is called. Usage:

    top_ipfile filename
    

    Example:

    top_ipfile	top_lignin.top
    
  7. resid_inp

    Mandatory keyword and the argument corresponds to the average probability of each residue in the system. It should be provided in a file with each line corresponding to the residue name and the average probability. Users should make sure that the residue name matches with the residue name in the topology file. Usage:

    resid_inp filename
    

    Example for formatting filename:

    SYR	0.4
    TRCN	0.05
    GUAI	0.3
    PCA	0.15
    FERUT 0.1
    

    NOTE: The sum of the probabilities need not be one. Code internally makes the sum to be one. However, a warning will be issued if the sum is not one. The inputs should contain the details for the branch (graft) monomers or else the code will not recongnize any branch monomer.

  8. patch_inp

    Mandatory keyword and the argument corresponds to the average probability of each patch in the system. It should be provided in a file with each line corresponding to the residue name and the average probability. Users should make sure that the patch name matches with the patch name in the topology file. Usage:

    resid_inp filename
    

    Example for formatting filename:

    BO4 0.8
    B5 0.1
    BB 0.05
    AO4 0.05
    

    NOTES:

    1. The sum of the probabilities need not be one. Code internally makes the sum to be one. However, a warning will be issued if the sum is not one.

    2. The inputs should NOT contain the details for the branch (graft) patches. DO NOT provide patch details for branch monomers here. This is different from inputting residues where the name of the branched residue should be present.

    3. If you are using SPRIG with LigninBuilder, please be aware that residues for which there exists equal probability for the tacticities (e.g. BO4R and BO4L for BO4), DO NOT give separate probabilities for each stereoisomer. Provide the overall probability. LigninBuilder will make sure that all the stereoisomers have equal probability.

  9. seg_name

    Mandatory keyword which corresponds to the name of the segment. Except for one case (see NOTE below), this will serve as the prefix for segment names for different chains in the psf file output. Usage:

    seg_name argname
    

    The output psf name will have segment names of the form argname_chainID where chainID is an integer varying from 1 to number of chains in the system.

    NOTE: In case, an input PDB file is given to generate the PDB file using genconf.py and NOT LigninBuilder, users must make sure that the segment name matches the segment name in the input PDB file that is used to generate the initial guesses for the initial coordinates (ICs).

  10. op_style (Optional)

    Keyword dictating the output style. There are two argument options -- single and multi. Usage:

    op_style single
    op_style multi 4
    

    For the argument single, a single ouput tcl file will be generated per chain. On running this with VMD or LigninBuilder, you can produce the final structure. However, the final structure may have unphysical bonds. It is the user's responsibility to check this. If the user is combining this code with LigninBuilder please use single option since LigninBuilder has capabilities to untangle unphysical bonds.

    For the argument multi, the program breaks down the tcl files into smaller tcl files. This requires an extra integer argument. Let us say that we are creating a polymer with degree of polymerization 20 and the extra argument is 4, the tcl file corresponding to this chain will have 5 different builds. First, the first four segments of the chain are built. Then NAMD is called to minimize the structure. The minimized structure is then used as an input to generate the next 4 residues -- so on and so forth. This requires NAMD path to be added correctly or else running tcl file may encounter errors.

    NOTE: Use the option single with LigninBuilder. Default is single.

  11. branching (Optional)

    To define branching of main chain. Branches are single monomer long in the current mode. The program can manage multiple types of branches. Usage:

    branching 1 branch1 patch1 branch2 patch2 ...
    

    The keyword branching should be followed by an integer 1 or 0. 1 corresponds to turning on the branch and 0 corresponds to no branch. This gives the user to toggle between branched and non-branched system easily.

    The branch1/patch1 pair corresponds to the name of the branch residue and the patch connecting the branch with the backbone. The inputs should always be given as pairs. Users must make sure that the residue names are already present in the input list for residues.

    Example:

    branching 1 PCA GOG FERUT GOG
    

    NOTE: Since, by construction, the number of patches equal to the number of residues in the system, the final probabilities for the patch values may not reflect the input values.

  12. nattempts (Optional)

    Number of attempts to achieve a random configuration that corresponds to the input probabilities for residues and patches. Each time a better target configuration (smaller residual error) is found, the program saves that configuration. In case, the target residual error is not met within nattempts, the best configuration along with the residual error will be generated as output. Usage:

    nattempts intvalue
    

    where intvalue is the number of attempts. A value between 50 and 200 for an average degree of polymerization of 30 works generates a target onfiguration in a few minutes.

    Example:

    nattempts 60
    

    Default value for nattempts is 50.

  13. tol (Optional)

    Relative tolerance between the input probabilities for residues/patches and averaged output values for residues/patches. L2norm is used to calculate the relative error. Program runs until the error is less than tolerance value or the number of attempts exceeds nattempts. Usage:

    tol	tolval
    

    where tolval is a number between 0 and 1. Nominal values are between 0.05 and 0.15. Default value is 0.1.

  14. terminator (Optional)

    Use this option to make sure that certain fraction of the chains end with this type of residue. This residue should be present in the input residue list. The final fraction of this residue will have an average probability closer to the value input to the program. Usage:

    terminator resname
    

    where resname is the name of the residue.

    Example

    terminator TRCN
    
  15. LigninBuilder (Optional)

    Use this option to generate output files that can be used in conjunction with LigninBuilder software to generate *.top files for GROMACS software. Usage:

    LigninBuilder filename
    

    where filename corresponds to the file that contains the details of the potentials. Usually this will have a .prm extension. Please make sure to provide the full path to the fil unless it is in same directory as genconf.py.

    Example:

    LigninBuilder par_lignin.prm
    
  16. clean_directories (Optional)

    Use this option to clean the existing output directory (casenum_ID) and replace with new files. Usage:

    clean_directories Y
    

    Arguments can be Y (yes) or N (no). Default is N.

    WARNING: All files will be deleted before the new output files are written into the directory.

  17. patch_patch_constraint (Optional)

    Optional argument to specify the constraints between adjacent patches. This is useful to let the program know that patches (linkers) cannot be next to each other. For instance, a patch (linker) of type $\beta$-5 cannot be followed by a 55 patch (linker) since the 5th position is already occupied. The constraints need to be specified in a separate file. Usage:

    patch_patch_constraint <filename>
    

    where <filename> contains the patch and the constraints. A sample example of this file will be as follows:

    55	55	5B
    BB	BB	GOG	B5	BO4
    B5	55
    GOG BB
    BO4 O4B 4O5
    

    The first entry of each row should be the first of the two consecutive patches. Next 'n' entries of the row should contain all the patches that are incompatible with the first entry.

    Rules of making a new row is as follows: first element in every row corresponds to the patch between residues i and i+1 whereas the other elements in the rows correspond to the EXCLUDED patch values between residue i+1 and residue i+2. For instance, let us say that a BO4 patch between residues 1 and 2, this DOES NOT preclude having the patch BO4 between 2 and 3. Therefore, for the row of BO4, there should not be BO4 in the EXCLUDED values. In other words, the number of occurences of BO4 for the row of BO4 should be exactly 1. Now, for a different case, let us say that a patch BB is present between residues 1 and 2. Therefore, the $\beta$ position of residue 2 is filled and we CANNOT have a patch which starts with "\beta" such as "BB" or "B5" or "BO4". In this case BB should be repeated twice (including the first column of that row).

    Finally, if there are branches (grafts) present, one needs to take extra care to include the exclusions.

    NOTES

    • Each row is independent. In other words, if pat_2 is incompatible with pat_1 does not mean that pat_1 is incompatible with pat_2. This incompatibility (if necessary) should be specified in separate rows.

    • The patch names should exactly match the names of the patches in the input patch list given using patch_inp. If the patch name in the input does not match what is given in the list, it will be ignored. However, it is OK for this file to have the name of the patches that is not present in the input given using patch_inp.

    • Although this is an optional argument, almost always there will be restrictions for real sytems. It is the user's responsiblity to make sure that all the constraints are given to the system.

  18. patch_res_constraint (Optional)

    Optional argument to specify the constraints between a patch (linker) and a residue. This is useful to let the program know that certain patches cannot succeed (or precede) a certain residue. For instance, a 55 patch can neither precede nor succeed a syringyl residue. However, 405 can precede a syringyl residue whereas it cannot succeed a syringyl residue. Similar to the patch_patch_constraint input, the incompatibility data should be input as a file. Usage

    patch_res_constraint <filename>
    

    where <filename> corresponds to the name of the file comprising the incompatibilities. There are certain keywords that should be present in this file. Keywords are case-sensitive.

    Example:

    patch	restrict_before	restrict_after
    55		SYR		SYR
    B5		None		SYR
    55		TRCN		TRCN
    B5		TRCN		TRCN
    

    NOTES

    • The first line of this file should have the following keywords: patch, restrict_before and restrict_after.

    • Each row should contain only 3 entries. The first entry is the name of the patch. The entry under restrict_before should correspond to the restriction that the patch cannot precede a residue and the entry below restrict_after should correspond to the restriction that the patch cannot succeed a residue. In the above example 55 can neither precede nor succeed a SYR residue. Similarly B5 can neither precede nor succeed a TRCN residue. However, B5 can come before SYR where as it cannot come after SYR.

    • Use None keyword (case-sensitive), if a patch can precede (but not succeed) or viceversa a given residue. By default, there are no restrictions. In other words, for all the patches mentioned in the input will have None as default argument for incompatibility.

    • If a patch cannot come before (or after) two residues, it should be specified in two separate lines. For instance, in the example above, patch 55 should be repeated twice for the program to know that it has incompatibility with both SYR and TRCN.

    • Although this is an optional argument, almost always there will be restrictions for real sytems. It is the user's responsiblity to make sure that all the constraints are given to the system.

  19. gen_packmol (to be added)

  20. namd_inp (to be added)

  21. pdb_ipfile (to be added)

About

All GROMACS/NAMD initializing files for generating initial structures for polydisperse chains with a set of residues desired by the user. With LigninBuilder, all lignin topologies can be built directly.

Topics

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published