Bump github.com/moby/moby #242
Workflow file for this run
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| name: tunasync | |
| on: [push] | |
| jobs: | |
| build: | |
| name: Build | |
| runs-on: ubuntu-latest | |
| steps: | |
| - name: Check out code into the Go module directory | |
| uses: actions/checkout@v3 | |
| - name: Set up Go 1.18 | |
| uses: actions/setup-go@v4 | |
| with: | |
| go-version: 1.18 | |
| id: go | |
| - name: Get dependencies | |
| run: | | |
| go get -v -t -d ./cmd/tunasync | |
| go get -v -t -d ./cmd/tunasynctl | |
| - name: Build | |
| run: | | |
| make tunasync | |
| make tunasynctl | |
| - name: Keep artifacts | |
| uses: actions/upload-artifact@v1 | |
| with: | |
| name: tunasync-bin | |
| path: build-linux-amd64/ | |
| test: | |
| name: Test | |
| runs-on: ubuntu-latest | |
| services: | |
| registry: | |
| image: registry:2 | |
| ports: | |
| - 5000:5000 | |
| steps: | |
| - name: Setup test dependencies | |
| run: | | |
| sudo apt-get update | |
| sudo apt-get install -y cgroup-tools | |
| docker pull alpine:3.8 | |
| - name: Check out code into the Go module directory | |
| uses: actions/checkout@v3 | |
| - name: Set up Go 1.18 | |
| uses: actions/setup-go@v4 | |
| with: | |
| go-version: 1.18 | |
| id: go | |
| - name: Run Unit tests. | |
| run: | | |
| go install github.com/wadey/gocovmerge@latest | |
| sudo systemd-run --service-type=oneshot --uid="$(id --user)" --pipe --wait \ | |
| --property=Delegate=yes --setenv=USECURCGROUP=1 \ | |
| --setenv=TERM=xterm-256color --same-dir \ | |
| make test | |
| - name: Run Additional Unit tests. | |
| run: | | |
| make build-test-worker | |
| sudo mkdir /sys/fs/cgroup/tunasync | |
| sudo ./worker.test -test.v=true -test.coverprofile profile2.cov -test.run TestCgroup | |
| sudo rmdir /sys/fs/cgroup/tunasync | |
| touch /tmp/dummy_exec | |
| chmod +x /tmp/dummy_exec | |
| run_test_reexec (){ | |
| case="$1" | |
| shift | |
| argv0="$1" | |
| shift | |
| (TESTREEXEC="$case" TERM=xterm-256color exec -a "$argv0" ./worker.test -test.v=true -test.coverprofile "profile5_$case.cov" -test.run TestReexec -- "$@") | |
| } | |
| run_test_reexec 1 tunasync-exec __dummy__ | |
| run_test_reexec 2 tunasync-exec /tmp/dummy_exec | |
| run_test_reexec 3 tunasync-exec /tmp/dummy_exec 3< <(echo -n "abrt") | |
| run_test_reexec 4 tunasync-exec /tmp/dummy_exec 3< <(echo -n "cont") | |
| run_test_reexec 5 tunasync-exec2 | |
| - name: Set up Docker Buildx | |
| uses: docker/setup-buildx-action@v2 | |
| with: | |
| driver-opts: network=host | |
| - name: Cache Docker layers | |
| uses: actions/cache@v3 | |
| if: github.event_name == 'push' | |
| with: | |
| path: /tmp/.buildx-cache | |
| key: ${{ runner.os }}-buildx-${{ github.sha }} | |
| restore-keys: | | |
| ${{ runner.os }}-buildx- | |
| - name: Cache Docker layers | |
| uses: actions/cache@v3 | |
| if: github.event_name == 'pull_request' | |
| with: | |
| path: /tmp/.buildx-cache | |
| key: ${{ runner.os }}-pr-${{ github.event.pull_request.head.user.login }}-buildx-${{ github.sha }} | |
| restore-keys: | | |
| ${{ runner.os }}-pr-${{ github.event.pull_request.head.user.login }}-buildx- | |
| ${{ runner.os }}-buildx- | |
| - name: Cache Docker layers | |
| if: github.event_name != 'push' && github.event_name != 'pull_request' | |
| run: | | |
| echo "I do not know how to setup cache" | |
| exit -1 | |
| - name: Prepare cache directory | |
| run: | | |
| mkdir -p /tmp/.buildx-cache | |
| - name: Build Docker image for uml rootfs | |
| uses: docker/build-push-action@v3 | |
| with: | |
| context: .umlrootfs | |
| file: .umlrootfs/Dockerfile | |
| push: true | |
| tags: localhost:5000/umlrootfs | |
| cache-from: type=local,src=/tmp/.buildx-cache | |
| cache-to: type=local,dest=/tmp/.buildx-cache | |
| - name: Fetch and install uml package | |
| run: | | |
| sudo apt-get update | |
| sudo apt-get install -y debian-archive-keyring | |
| sudo ln -sf /usr/share/keyrings/debian-archive-keyring.gpg /etc/apt/trusted.gpg.d/ | |
| echo "deb http://deb.debian.org/debian bullseye main" | sudo tee /etc/apt/sources.list.d/bullseye.list | |
| sudo apt-get update | |
| apt-get download user-mode-linux/bullseye | |
| sudo rm /etc/apt/sources.list.d/bullseye.list | |
| sudo apt-get update | |
| sudo mv user-mode-linux_*.deb /tmp/uml.deb | |
| sudo apt-get install --no-install-recommends -y /tmp/uml.deb | |
| sudo rm /tmp/uml.deb | |
| sudo apt-get install --no-install-recommends -y rsh-redone-client | |
| - name: Prepare uml environment | |
| run: | | |
| docker container create --name umlrootfs localhost:5000/umlrootfs | |
| sudo mkdir -p umlrootfs | |
| docker container export umlrootfs | sudo tar -xv -C umlrootfs | |
| docker container rm umlrootfs | |
| sudo cp -a --target-directory=umlrootfs/lib/ /usr/lib/uml/modules | |
| /bin/echo -e "127.0.0.1 localhost\n254.255.255.1 host" | sudo tee umlrootfs/etc/hosts | |
| sudo ip tuntap add dev umltap mode tap | |
| sudo ip addr add 254.255.255.1/24 dev umltap | |
| sudo ip link set umltap up | |
| - name: Start Uml | |
| run: | | |
| start_uml () { | |
| sudo bash -c 'linux root=/dev/root rootflags=/ rw rootfstype=hostfs mem=2G eth0=tuntap,umltap hostfs="$PWD/umlrootfs" con1=pts systemd.unified_cgroup_hierarchy=0 & pid=$!; echo "UMLINUX_PID=$pid" >> '"$GITHUB_ENV" | |
| } | |
| ( start_uml ) | |
| started=0 | |
| for i in $(seq 1 60); do | |
| if ping -c 1 -w 1 254.255.255.2; then | |
| started=1 | |
| break | |
| fi | |
| done | |
| if [ "$started" != "1" ]; then | |
| echo "Failed to wait Umlinux online" | |
| exit 1 | |
| fi | |
| - name: Prepare Uml Environment | |
| run: | | |
| CUSER="$(id --user --name)" | |
| CUID="$(id --user)" | |
| CGID="$(id --group)" | |
| sudo chroot umlrootfs bash --noprofile --norc -eo pipefail << EOF | |
| groupadd --gid "${CGID?}" "${CUSER?}" | |
| useradd --create-home --home-dir "/home/${CUSER}" --gid "${CGID?}" \ | |
| --uid "${CUID?}" --shell "\$(which bash)" "${CUSER?}" | |
| EOF | |
| ln ./worker.test "umlrootfs/home/${CUSER}/worker.test" | |
| - name: Run Tests in Cgroupv1 | |
| run: | | |
| CUSER="$(id --user --name)" | |
| sudo rsh 254.255.255.2 bash --noprofile --norc -eo pipefail << EOF | |
| cd "/home/${CUSER}" | |
| lssubsys -am | |
| cgcreate -a "$CUSER" -t "$CUSER" -g cpu:tunasync | |
| cgcreate -a "$CUSER" -t "$CUSER" -g memory:tunasync | |
| TERM=xterm-256color ./worker.test -test.v=true -test.coverprofile \ | |
| profile3.cov -test.run TestCgroup | |
| cgexec -g "*:/" bash -c "echo 0 > /sys/fs/cgroup/systemd/tasks; exec sudo -u $CUSER env USECURCGROUP=1 TERM=xterm-256color cgexec -g cpu,memory:tunasync ./worker.test -test.v=true -test.coverprofile profile4.cov -test.run TestCgroup" | |
| EOF | |
| - name: Stop Uml | |
| run: | | |
| sudo rsh 254.255.255.2 systemctl poweroff | |
| sleep 10 | |
| if [ -e "/proc/$UMLINUX_PID" ]; then | |
| sleep 10 | |
| if [ -e "/proc/$UMLINUX_PID" ]; then | |
| sudo kill -TERM "$UMLINUX_PID" || true | |
| sleep 1 | |
| fi | |
| fi | |
| if [ -e "/proc/$UMLINUX_PID" ]; then | |
| sleep 10 | |
| if [ -e "/proc/$UMLINUX_PID" ]; then | |
| sudo kill -KILL "$UMLINUX_PID" || true | |
| sleep 1 | |
| fi | |
| fi | |
| - name: Combine coverage files | |
| run : | | |
| CUSER="$(id --user --name)" | |
| "${HOME}/go/bin/gocovmerge" profile.cov profile2.cov \ | |
| "umlrootfs/home/${CUSER}/profile3.cov" \ | |
| "umlrootfs/home/${CUSER}/profile4.cov" \ | |
| profile5_*.cov > profile-all.cov | |
| - name: Convert coverage to lcov | |
| uses: jandelgado/[email protected] | |
| with: | |
| infile: profile-all.cov | |
| outfile: coverage.lcov | |
| - name: Coveralls | |
| uses: coverallsapp/github-action@v2 | |
| with: | |
| github-token: ${{ secrets.github_token }} | |
| path-to-lcov: coverage.lcov |