Terminal Table is a fast and simple, yet feature rich table generator written in Ruby. It supports ASCII and Unicode formatted tables.
$ gem install terminal-table
To use Terminal Table:
require 'terminal-table'To generate a table, provide an array of arrays (which are interpreted as rows):
rows = []
rows << ['One', 1]
rows << ['Two', 2]
rows << ['Three', 3]
table = Terminal::Table.new :rows => rows
# > puts table
#
# +-------+---+
# | One | 1 |
# | Two | 2 |
# | Three | 3 |
# +-------+---+The constructor can also be given a block which is either yielded the Table object or instance evaluated:
table = Terminal::Table.new do |t|
t.rows = rows
end
table = Terminal::Table.new do
self.rows = rows
endAdding rows one by one:
table = Terminal::Table.new do |t|
t << ['One', 1]
t.add_row ['Two', 2]
endTo add separators between rows:
table = Terminal::Table.new do |t|
t << ['One', 1] # Using << (push) as an alias for add_row
t << :separator # Using << with :separator as an alias for add_separator
t.add_row ['Two', 2]
t.add_separator # Note - this version allows setting the separator's border_type
t.add_row ['Three', 3]
end
# > puts table
#
# +-------+---+
# | One | 1 |
# +-------+---+
# | Two | 2 |
# +-------+---+
# | Three | 3 |
# +-------+---+Cells can handle multiline content:
table = Terminal::Table.new do |t|
t << ['One', 1]
t << :separator
t.add_row ["Two\nDouble", 2]
t.add_separator
t.add_row ['Three', 3]
end
# > puts table
#
# +--------+---+
# | One | 1 |
# +--------+---+
# | Two | 2 |
# | Double | |
# +--------+---+
# | Three | 3 |
# +--------+---+To add a head to the table:
table = Terminal::Table.new :headings => ['Word', 'Number'], :rows => rows
# > puts table
#
# +-------+--------+
# | Word | Number |
# +-------+--------+
# | One | 1 |
# | Two | 2 |
# | Three | 3 |
# +-------+--------+To add a title to the table:
table = Terminal::Table.new :title => "Cheatsheet", :headings => ['Word', 'Number'], :rows => rows
# > puts table
#
# +---------------------+
# | Cheatsheet |
# +------------+--------+
# | Word | Number |
# +------------+--------+
# | One | 1 |
# | Two | 2 |
# | Three | 3 |
# +------------+--------+To align the second column to the right:
table.align_column(1, :right)
# > puts table
#
# +-------+--------+
# | Word | Number |
# +-------+--------+
# | One | 1 |
# | Two | 2 |
# | Three | 3 |
# +-------+--------+To align an individual cell, you specify the cell value in a hash along the alignment:
table << ["Four", {:value => 4.0, :alignment => :center}]
# > puts table
#
# +-------+--------+
# | Word | Number |
# +-------+--------+
# | One | 1 |
# | Two | 2 |
# | Three | 3 |
# | Four | 4.0 |
# +-------+--------+To specify style options:
table = Terminal::Table.new :headings => ['Word', 'Number'], :rows => rows, :style => {:width => 80}
# > puts table
#
# +--------------------------------------+---------------------------------------+
# | Word | Number |
# +--------------------------------------+---------------------------------------+
# | One | 1 |
# | Two | 2 |
# | Three | 3 |
# +--------------------------------------+---------------------------------------+And change styles on the fly:
table.style = {:width => 40, :padding_left => 3, :border_x => "=", :border_i => "x"}
# > puts table
#
# x======================================x
# | Cheatsheet |
# x====================x=================x
# | Word | Number |
# x====================x=================x
# | One | 1 |
# | Two | 2 |
# | Three | 3 |
# x====================x=================xYou can also use styles to add a separator after every row:
table = Terminal::Table.new do |t|
t.add_row [1, 'One']
t.add_row [2, 'Two']
t.add_row [3, 'Three']
t.style = {:all_separators => true}
end
# > puts table
#
# +---+-------+
# | 1 | One |
# +---+-------+
# | 2 | Two |
# +---+-------+
# | 3 | Three |
# +---+-------+You can also use styles to disable top and bottom borders of the table.
table = Terminal::Table.new do |t|
t.headings = ['id', 'name']
t.rows = [[1, 'One'], [2, 'Two'], [3, 'Three']]
t.style = { :border_top => false, :border_bottom => false }
end
# > puts table
# | id | name |
# +----+-------+
# | 1 | One |
# | 2 | Two |
# | 3 | Three |And also to disable left and right borders of the table.
table = Terminal::Table.new do |t|
t.headings = ['id', 'name']
t.rows = [[1, 'One'], [2, 'Two'], [3, 'Three']]
t.style = { :border_left => false, :border_right => false }
end
# > puts table
# ----+-------
# id | name
# ----+-------
# 1 | One
# 2 | Two
# 3 | Three
# ----+-------To change the default style options:
Terminal::Table::Style.defaults = {:width => 80}All Table objects created afterwards will inherit these defaults.
Valid options for the constructor are :rows, :headings, :style and :title -
and all options can also be set on the created table object by their setter
method:
table = Terminal::Table.new
table.title = "Cheatsheet"
table.headings = ['Word', 'Number']
table.rows = rows
table.style = {:width => 40}Support for Unicode 'box art' borders presented a challenge, as the original terminal-table only handled three border types: horizontal (x), vertical (y), and intersection (i). For proper box-art, it became necessary to enable different types of corners/edges for multiple intersection types.
For the sake of backward compatiblity, the previous interface is still supported, as this gem has been around a long time and making breaking changes would have been inconvenient. The new interface is required for any complex and/or Unicode style bordering. A few variations on border style are supported via some new classes and creation of additional classes (or modification of characters used in existing ones) will allow for customized border types.
The simplest way to use an alternate border is one of the following:
table.style = { :border => :unicode }
table.style = { :border => :unicode_round }
table.style = { :border => :unicode_thick_edge }
These are a convenience wrapper around setting border using an instance of a class that inherits from Table::Terminal::Border
table.style = { :border => Terminal::Table::UnicodeBorder.new() }
table.style = { :border => Terminal::Table::UnicodeRoundBorder.new() }
table.style = { :border => Terminal::Table::UnicodeThickEdgeBorder.new() }
If you define a custom class and wish to use the symbol shortcut, you must namespace within Terminal::Table and end your class name with Border.
Per popular request, Markdown formatted tables can be generated by using the following border style:
table.style = { :border => :markdown }
Ascii borders are default, but can be explicitly set with:
table.style = { :border => :ascii }
Inside the UnicodeBorder class, there are definitions for a variety of corner/intersection and divider types.
@data = {
nil => nil,
nw: "┌", nx: "─", n: "┬", ne: "┐",
yw: "│", y: "│", ye: "│",
aw: "╞", ax: "═", ai: "╪", ae: "╡", ad: '╤', au: "╧", # double
bw: "┝", bx: "━", bi: "┿", be: "┥", bd: '┯', bu: "┷", # heavy/bold/thick
w: "├", x: "─", i: "┼", e: "┤", dn: "┬", up: "┴", # normal div
sw: "└", sx: "─", s: "┴", se: "┘",
# alternative dots/dashes
x_dot4: '┈', x_dot3: '┄', x_dash: '╌',
bx_dot4: '┉', bx_dot3: '┅', bx_dash: '╍',
}Note that many are defined as directional (:nw == north-west), others defined in terms of 'x' or 'y'.
The border that separates headings (below each heading) is of type :double and is defined with a* entries.
Alternate :heavy types that can be applied to separators can be defined with b* entries.
When defining a new set of borders, it's probably easiest to define a new class that inherits from UnicodeBorder and replaces the @data Hash.
However, these elements can be these can be overridden by poking setting the Hash, should the need arise:
table.style = {border: :unicode}
table.style.border[:nw] = '*' # Override the north-west corner of the table
Row-separators can now be customized in a variety of ways. The default separator's border_type is referred to as :div. Additional separator border types (e.g. :double, :heavy, :dash - see full list below) can be applied to separate the sections (e.g. header/footer/title).
The separator's border_type may be specified when a user-defined separator is added. Alternatively, borders may be adjusted after the table's rows are elaborated, but before the table is rendered.
Separator border_types can be adjusted to be heavy, use double-lines, and different dash/dot styles. The border type should be one of:
div dash dot3 dot4
thick thick_dash thick_dot3 thick_dot4
heavy heavy_dash heavy_dot3 heavy_dot4
bold bold_dash bold_dot3 bold_dot4
double
To manually set the separator border_type, the add_separator method may be called.
add_separator(border_type: :heavy_dash)Alternatively, if style: :all_separators is used at the table level, it may be necessary to elaborate the implicit Separator rows prior to rendering.
table = Terminal::Table.new do |t|
t.add_row [1, 'One']
t.add_row [2, 'Two']
t.add_row [3, 'Three']
t.style = {:all_separators => true}
end
rows = table.elaborate_rows
rows[2].border_type = :heavy # modify separator row: emphasize below title
puts table.renderThis example code demonstrates using Terminal-table and CSV to display a small spreadsheet.
#!/usr/bin/env ruby
require "csv"
require "terminal-table"
use_stdin = ARGV[0].nil? || (ARGV[0] == '-')
io_object = use_stdin ? $stdin : File.open(ARGV[0], 'r')
csv = CSV.new(io_object)
csv_array = csv.to_a
user_table = Terminal::Table.new do |v|
v.style = { :border => :unicode_round } # >= v3.0.0
v.title = "Some Title"
v.headings = csv_array[0]
v.rows = csv_array[1..-1]
end
puts user_tableSee also examples/show_csv_table.rb in the source distribution.
For more examples, please see the examples directory included in the
source distribution.
TJ Holowaychuk [email protected]
Unicode table support by Ben Bowers https://github.com/nanobowers