Dedicated Open Object Detection Service - Yes, it's a backronym...
DOODS is a REST service that detects objects in images or video streams. It's designed to be very easy to use, run as a container and available remotely. It also supports GPUs and EdgeTPU hardware acceleration.
DOODS2 is a rewrite of DOODS in Python. It supports the exact same REST api endpoints as the original DOODS but it also includes endpoints for handling streaming feeds with realtime feedback as annotated video and websocket JSON detection data.
Why Python you may ask... Well, lots of machine learning stuff is in Python and there is pretty good support for Object Detection and helpers in Python. Maintaining the code in Go was a huge pain. DOODS2 is designed to have a compatible API specification with DOODS as well as adding some additional features. It's my hope that in Python I might get a little more interest from the community in maintaining it and adding features.
DOODS2 drops support for gRPC as I doubt very much anyone used it anyways.
On your local machine run: docker run -it -p 8080:8080 snowzach/doods2:latest and open a browser to http://localhost:8080
Try uploading an image file or passing it an RTSP video stream. You can make changes to the specification by referencing the Detect Request payload.
Three detectors are included with the base image that you can try.
- default - coco_ssd_mobilenet_v1_1.0_quant.tflite - A decent and fast Tensorflow light object detector.
- tensorflow - faster_rcnn_inception_v2_coco_2018_01_28.pb - A much slower but more accurate Tensorflow object detector.
- yolov5s - https://github.com/ultralytics/yolov5 yolo V5 model - A fast and accurate detector
DOODS2 is distributed in a docker image. There are several tags you can reference to pick the image you like.
- armv7l - 32 bit ARM devices with a v7 CPU like the Raspberry Pi
- Does not include PyTorch or Tensorflow Object Detection
- aarch64 - 64 bit ARM devices with a v8 CPU (Raspberry Pi 64 bit, ODroid, etc)
- Does not include PyTorch or Tensorflow Object Detection
- noavx - 64 bit x86_64 architecture WITHOUT avx support. This should run on just about everything.
- latest - The
latesttag references the above 3 tags so if you pick latest it should work on just about everything.
Additional more optimized tags are available:
- amd64 - 64 bit x86_64 architecture WITH avx support. This should be faster than the noavx image on newer processors.
- amd64-gpu - 64 bit x86_64 architecture with NVidia GPU support. See the section below on how to run this.
The REST API has several endpoints for detecting objects in images as well as streams. Details of the payloads and endpoints are below.
Every request to DOODS involves the Detect Request JSON object that looks like this.
{
// This ID field is user definable and will return the same ID that was passed in.
"id": "whatever",
// This is the name of the detector to be used for this detection. If not specified, 'default' will be used if it exists.
"detector_name": "default",
// Data is either base64 encoded image data for a single image, it may also be a URL to an image
// For a stream it's expected to be a URL that can be read by ffmpeg. `rtsp://..` or `http://..` is typical.
// You can also provide a video URL to detect a single image. It will grab a single frame from the source to
// run detection on. (It may be kinda slow though)
"data": "b64 or url",
// The image option determines, for API calls that return an image, what format the image should be.
// Supported options currently are "jpeg" and "png"
"image": "jpeg",
// The throtle option determines, for streaming API calls only, how often it should return results
// in seconds. For example, 5 means return 1 result about every 5 seconds. A value of 0 indicates
// it should return results as fast as it can.
"throttle": 5,
// Ths is an optional list of strings of preprocessing functions to apply to the images. Each supported
// option is listed below.
"preprocess": [
// grayscale = changes the image to grayscale before processing
"grayscale"
],
// detect is an object of label->confidence matches that will be applied to the entire image
// The "*" for the label name indicates it can match any label. If a specific label is listed
// then it cannot be matched by the wildcard. This example matches any label at 50% confidence
// and only car if it's confidence is over 60%.
"detect": {
"*": 50,
"car": 60
},
// The regions array is a list of specific matches for areas within your image/video stream.
// When processing rules, the first detection rule to match wins.
"regions": [
// The top,left,bottom and right are float values from 0..1 that indicate a bounding box to look
// for object detections. They are based on the image size. A 400x300 image with a bounding box
// as shown in the example blow would look for objects inside the box of
// {top: 300*0.1 = 30, left: 400*0.1 = 40, bottom: 300*0.9 = 270, right: 400*0.9 = 360}
// The detect field is exactly how it's described above in the global detection option for you
// to specify the labels that you wish to match.
// The covers boolean indicates if this region must completely cover the detected object or
// not. If covers = true, then the detcted object must be completely inside of this region to match.
// If covers = false than if any part of this object is inside of this region, it will match.
// If defined, the optional id field will be included in detections that this region matched. NOTE:
// only the first region (including the global detection) to match an object will be used.
{"id": "someregion", "top": 0.1, "left": 0.1, "bottom": 0.9, "right": 0.9, "detect": {"*":50}, "covers": false}
...
],
// NOTE: Below fields are only available in requests configured as part of the MQTT configuration
// If separate_detections is true each detected object will be published separately into
// a sub-topic based on its type (e.g doods/detect/requestid/regionid/person). When False, the default,
// the whole DetectResponse object will be published to the request topic (e.g. doods/detect/requestid).
"separate_detections" : false,
// If crop is true and separate_detections is true requested images will be cropped to
// the decection box. Has no effect if separate_detections is false.
"crop": false,
// If binary_images is true requested images will be pubished as binary data
// to a separate topic (e.g. doods/image/requestid) instead of base64 encoded into the response.
"binary_images" : false,
} {
// This is the ID passed in the detect request.
"id": "whatever",
// If you specified a value for image in the detection request, this is the base64 encoded imge
// returned from the detection. It has all of the detectons bounding boxes marked with label and
// confidence.
"image": "b64 data...",
// Detections is a list of all of the objects detected in the image after being passed through
// all of the filters. The top,left,bottom and right values are floats from 0..1 describing a
// bounding box of the object in the image. The label of the object and the confidence from 0..100
// are also provided.
"detections": [
{"top": 0.1, "left": 0.1, "bottom": 0.9, "right": 0.9, "label": "dog", "confidence": 90.0 }
...
],
// Any errors detected in the processing
"error": "any errors"
}If you just browse to the DOODS2 endpoint you will be presented with a very simple UI for testing and working with DOODS. It allows you to upload an image and test settings as well as kick off streaming video processes to monitor results in realtime as you tune your settings.
This API call returns the configured detectors on DOODS and includes the list of labels that each detector supports.
This API call takes a JSON Detect Request in the POST body and returns a JSON Detect Response with the detections.
This is a websocket endpoint that works exactly how the /detect API works except that you may
send in many JSON Detect Request messages and it will process them asynchronously
and return the responses. You should use unique id field values in the request to tell the responses
apart.
This API call takes a JSON Detect Request in the POST body and returns an image as specified in the image propert of the Detect Request with all of the bounding boxes drawn with labels and confidence. This is equivalent of calling the POST /detect endpoint but only returning the image rather than all of the detection information as well.
This endpoint takes a URL Encoded JSON Detect Request document as the detect_request query parameter. It expected the data
value of the Detect Request to be a streaming video URL (like rtsp://...) It will connect to the stream and continuously
process detections as fast as it can (or as dictated by the throttle parameter) and returns an MJPEG video stream
suitable for viewing in most browsers. It's useful for testing.
This is a websocket endpoint where once connected expects you to send a single JSON Detect Request.
In the request it's expected that the data parameter will be a streaming video URL (like rtsp://...) It will
connect to the stream and continuously process detections as fast as it can (or as dictated by the throttle parameter).
It will return JSON Detect Response every time it processes a frame. Additionally, if you specified
a value for the image parameter, it will include the base64 encoded image in the image part of the response with
the bounding boxes, labels and confidence marked.
DOODS requires a YAML configuration file to operate. There is a built in default configuration in the docker image that references built in default models. The configuration file looks like this by default.
server:
host: 0.0.0.0
port: 8080
metrics: true
logging:
level: info
doods:
log: detections
boxes:
enabled: True
boxColor: [0, 255, 0] # Or hex string "#00ff00"
boxThickness: 1
fontScale: 1.2
fontColor: [0, 255, 0] # Or hex string "#00ff00"
fontThickness: 1
regions:
enabled: True
boxColor: [255, 0, 255] # Or hex string "#ff00ff"
boxThickness: 1
fontScale: 1.2
fontColor: [255, 0, 255] # Or hex string "#ff00ff"
fontThickness: 1
globals:
enabled: True
fontScale: 1.2
fontColor: [255, 255, 0] # Or hex string "#ffff00"
fontThickness: 1
detectors:
- name: default
type: tflite
modelFile: models/coco_ssd_mobilenet_v1_1.0_quant.tflite
labelFile: models/coco_labels0.txt
- name: tensorflow
type: tensorflow
modelFile: models/faster_rcnn_inception_v2_coco_2018_01_28.pb
labelFile: models/coco_labels1.txt
- name: pytorch
type: pytorch
modelFile: ultralytics/yolov5,yolov5s
mqtt:
You can pass a new configuration file using an environment variable CONFIG_FILE. There is also a --config and -c command line option.
for passing a configuration file. The environment variable takes precedences if set. Otherwise it defaults to looking for a config.yaml in the
current directory.
Configuration options can also be set with environment variables using the value in all caps separated by underscore. For example
you can set SERVER_HOST=127.0.0.1 to only listen on localhost. Setting the doods detectors must be done with a config file.
This allows you to set the host and port the DOODS2 server listens on.
This lets you set the logging level of the server.
This lets you set the logging of detections.
detections - Log detections (default)
all - Log ALL detections (before apply the filters for regions, labels, etc)
The boxes allows you to set if, when requesting an image be returned, will the detections be drawn with bounding boxes. The defaults are shown above. You can disable the boxes as well as set the box color and line thickness. The color is specified as a 3 value list of RGB values. The font scale, thickness and color can be set seprately.
This allows you to annotate returned images with the requested regions and global detection regions that you are scanning for in images. You could use this to debug and then disable them when you are done if you don't want to see them in your images.
Here's an example of how to call DOODS from the command line with a 1-Liner using curl with image data:
echo "{\"detector_name\":\"default\", \"detect\":{\"*\":60}, \"data\":\"`cat grace_hopper.png|base64 -w0`\"}" > /tmp/postdata.json && curl -d@/tmp/postdata.json -H "Content-Type: application/json" -X POST http://localhost:8080/detect
Another example 1-Liner specifying a region:
echo "{\"detector_name\":\"default\", \"regions\":[{\"top\":0,\"left\":0,\"bottom\":1,\"right\":1,\"detect\":{\"person\":40}}], \"data\":\"`cat grace_hopper.png|base64 -w0`\"}" > /tmp/postdata.json && curl -d@/tmp/postdata.json -H "Content-Type: application/json" -X POST http://localhost:8087/detect
DOODS2 supports the EdgeTPU hardware accelerator. This requires Tensorflow lite edgetpu.tflite models.
In the config you need to set the hwAccel boolean to true for the model and it will load the edgeTPU driver and model.
As well, you will need to pass the edgeTPU device to DOODS. This is typically done with the docker flag --device=/dev/bus/usb
or in a docker-compose file with:
version: '3.2'
services:
doods:
image: snowzach/doods2:amd64-gpu
ports:
- "8080:8080"
devices:
- /dev/bus/usbYou can download models for the edgeTPU here: https://coral.ai/models/object-detection
NVidia GPU support is available in the :amd64-gpu tagged image. This requires the host machine have NVidia CUDA installed as well as
Docker 19.03 and above with the nvidia-container-toolkit.
See this page on how to install the CUDA drives and the container toolkit: https://docs.nvidia.com/datacenter/cloud-native/container-toolkit/install-guide.html
You need to tell docker to pass the GPU through for DOODS to use. You can do this with the docker run command by adding --gpus all to the command.
You can also do this with docker-compose by adding this to the DOODS container specification:
version: '3.2'
services:
doods:
image: snowzach/doods2:amd64-gpu
ports:
- "8080:8080"
deploy:
resources:
reservations:
devices:
- driver: nvidia
count: 1
capabilities: [gpu]There are currently 5 supported dectector formats
- tflite - Tensorflow lite
.tflitemodels - tensorflow - Original tensoflow frozen models (Usually end with
.pb) - pytorch - PyTorch based models like yolov5
- deepstack - Deepstack models suppor
- yolo - Ultralytics based models (yolo)
- tensorflow2 - DISABLED - The libraries required were huge (2.2GB) and it was too slow to be useful for the time being.
- labelsStartFromZero: true - The labels file starts from index zero instead of 1 like most labels.
Just download the file, make it available to dudes and put the path to the tflite model file
in for the modelFile config option and the path to the text labelsFile in the config option. You can also set
hwAccel if it's an edgetpu.tflite and of course you actually have a EdgeTPU connected.
Tensorflow Lite is the one type you can use the numThreads argument with and it will create a pool of tflite models for
which to run detections. You can create as many as you want.
These are protobuf files that end in .pb. You just need to download them and usually un-tgz the archive and get the .pb file
and provide it to DOODS along with the labels file.
There's a good list of these here: https://github.com/tensorflow/models/blob/master/research/object_detection/g3doc/tf1_detection_zoo.md
This allows you to pull models directly from github using the torch.hub system. https://pytorch.org/docs/stable/hub.html
To configure these, for the model file specify the hub name and then the model separated by a comma. It will download and load the model.
Example:
modelFile: ultralytics/yolov5,yolov5s
This is the PyTorch Hub https://pytorch.org/hub/ DOODS really only supports model detection models. All models may not work yet as I work out the shape of the detections.
If you want to cache the models that are downloaded, you can set the environment variables as below:
$TORCH_HOME/hub, if environment variableTORCH_HOMEis set. (this will cache the models)$XDG_CACHE_HOME/torch/hub, if environment variableXDG_CACHE_HOMEis set. (this will cache the models and python modules)- The default is
/root/.cache/torch
You can pass the enviroment variables using docker -e TORCH_HOME=/home/user/doods -v /home/user/doods:/data,
this will cache the models to /data folder inside the docker container and to /home/user/doods in the host machine
More info here
Deepstack is a pretty slick system that works pretty similar to the way that DOODS operates. There are quite a few models that have been custom trained. There are some samples here: https://docs.deepstack.cc/custom-models-samples/ All you need to do is download the .pt files and list them as the model file in the config. The labels seems to be embedded.
If you receive a message that says No module named 'models.yolo' you are using a model that expects a very specific directory
layout. You can fix the issue by downloading this file into your models directory adjacent to your model:
https://raw.githubusercontent.com/johnolafenwa/deepstack-trainer/main/models/yolo.py This should resolve your issue.
Support for Ultralytics YOLO based models. Provide a .pt file as model file in the config. Labels are embedded.
REMOVED: The dependencies for Tensorflow 2 Object detection were massive and it was really slow so I removed it for the time being.
Tensorflow 2 models are a little more complex and have a directory of files that you must pass into DOODS. You can download the file
and extract it to it's directory. For the modelFile option pass the path to the directory. You will need to download the labels file
as well and provide it's path in the labelsFile option.
This is a model zoo for Tensorflow 2 models: https://github.com/tensorflow/models/blob/master/research/object_detection/g3doc/tf2_detection_zoo.md
I think they are better but they generally are much slower and probably require a GPU to work in a reasonable amount of time.
DOODS also supports a so called MQTT modes. In this mode, rather than listen via an HTTP api, it instead connects to an MQTT broker. The config file will instead look like this:
mqtt:
broker:
host: 127.0.0.1
port: 1883
user: username # optional
password: password # optional
api:
request_topic: doods2/request_topic
response_topic: doods2/response_topic
requests:
- id: first
detector_name: default
throttle: 2
detect:
"person": 40
data: rtsp://user:[email protected]/stream1
- id: second
detector_name: tensorflow
throttle:
detect:
"person": 40
data: rtsp://user:[email protected]/stream2
You can then do a couple of things, you can send json formatted requests (same format as the HTTP API) to the request_topic and doods will respond on the response_topic. This is an asynchronous way to call doods via MQTT. The other thing you can do is configure requests with streams (like RTSP) and it will read from the stream and stream back detections on the response_topic. This might be useful for an NVR service to get back responses as fast as the throttle settings. For instance, 5 means 1 detection every 5 seconds. See the detection request section above for a list of all options.