Fix x86 SIMD Extension Handling

.github/workflows/build-nightly.yaml

@@ -137,13 +137,13 @@ jobs:
 
           if [ "$ARCHITECTURE" = "Win32" ]; then
               cmake -DCMAKE_INSTALL_PREFIX="$(pwd)/install" -DFSO_USE_SPEECH="ON" \
-                -DFSO_USE_VOICEREC="ON" -DMSVC_SIMD_INSTRUCTIONS="$SIMD" \
+                -DFSO_USE_VOICEREC="ON" -DFORCED_SIMD_INSTRUCTIONS="$SIMD" \
                 -DFSO_BUILD_QTFRED=OFF -DFSO_BUILD_TESTS=ON \
                 -DFSO_INSTALL_DEBUG_FILES="ON" -DFSO_BUILD_WITH_VULKAN="OFF" -A "$ARCHITECTURE" \
                 -G "Visual Studio 16 2019" -T "v142" ..
           else
               cmake -DCMAKE_INSTALL_PREFIX="$(pwd)/install" -DFSO_USE_SPEECH="ON" \
-                -DFSO_USE_VOICEREC="ON" -DMSVC_SIMD_INSTRUCTIONS="$SIMD" \
+                -DFSO_USE_VOICEREC="ON" -DFORCED_SIMD_INSTRUCTIONS="$SIMD" \
                 -DFSO_BUILD_QTFRED=OFF -DFSO_BUILD_TESTS=ON \
                 -DFSO_INSTALL_DEBUG_FILES="ON" -A "$ARCHITECTURE" \
                 -G "Visual Studio 16 2019" -T "v142" ..

.github/workflows/build-release.yaml

@@ -193,13 +193,13 @@ jobs:
 
           if [ "$ARCHITECTURE" = "Win32" ]; then
               cmake -DCMAKE_INSTALL_PREFIX="$(pwd)/install" -DFSO_USE_SPEECH="ON" \
-                  -DFSO_USE_VOICEREC="ON" -DMSVC_SIMD_INSTRUCTIONS="$SIMD" \
+                  -DFSO_USE_VOICEREC="ON" -DFORCED_SIMD_INSTRUCTIONS="$SIMD" \
                   -DFSO_BUILD_QTFRED=OFF -DFSO_BUILD_TESTS=ON \
                   -DFSO_INSTALL_DEBUG_FILES="ON" -DFSO_BUILD_WITH_VULKAN="OFF" -A "$ARCHITECTURE" \
                   -G "Visual Studio 16 2019" -T "v142" ..
           else
               cmake -DCMAKE_INSTALL_PREFIX="$(pwd)/install" -DFSO_USE_SPEECH="ON" \
-                  -DFSO_USE_VOICEREC="ON" -DMSVC_SIMD_INSTRUCTIONS="$SIMD" \
+                  -DFSO_USE_VOICEREC="ON" -DFORCED_SIMD_INSTRUCTIONS="$SIMD" \
                   -DFSO_BUILD_QTFRED=OFF -DFSO_BUILD_TESTS=ON \
                   -DFSO_INSTALL_DEBUG_FILES="ON" -A "$ARCHITECTURE" \
                   -G "Visual Studio 16 2019" -T "v142" ..

.github/workflows/build-test.yaml

@@ -150,13 +150,13 @@ jobs:
 
           if [ "$ARCHITECTURE" = "Win32" ]; then
               cmake -DCMAKE_INSTALL_PREFIX="$(pwd)/install" -DFSO_USE_SPEECH="ON" \
-                -DFSO_USE_VOICEREC="ON" -DMSVC_SIMD_INSTRUCTIONS="$SIMD" \
+                -DFSO_USE_VOICEREC="ON" -DFORCED_SIMD_INSTRUCTIONS="$SIMD" \
                 -DFSO_BUILD_QTFRED=OFF -DFSO_BUILD_TESTS=ON \
                 -DFSO_INSTALL_DEBUG_FILES="ON" -DFSO_BUILD_WITH_VULKAN="OFF" -A "$ARCHITECTURE" \
                 -G "Visual Studio 16 2019" -T "v142" ..
           else
               cmake -DCMAKE_INSTALL_PREFIX="$(pwd)/install" -DFSO_USE_SPEECH="ON" \
-                -DFSO_USE_VOICEREC="ON" -DMSVC_SIMD_INSTRUCTIONS="$SIMD" \
+                -DFSO_USE_VOICEREC="ON" -DFORCED_SIMD_INSTRUCTIONS="$SIMD" \
                 -DFSO_BUILD_QTFRED=OFF -DFSO_BUILD_TESTS=ON \
                 -DFSO_INSTALL_DEBUG_FILES="ON" -A "$ARCHITECTURE" \
                 -G "Visual Studio 16 2019" -T "v142" ..

.github/workflows/test-pull_request.yaml

@@ -133,11 +133,11 @@ jobs:
           else
               if [ "$ARCHITECTURE" = "Win32" ]; then
                   cmake -DFSO_USE_SPEECH="ON" -DFSO_FATAL_WARNINGS="ON" -DFSO_USE_VOICEREC="OFF" -DFSO_BUILD_TESTS="ON" \
-                      -DMSVC_SIMD_INSTRUCTIONS=SSE2 -DFSO_BUILD_FRED2="ON" -DFSO_BUILD_WITH_VULKAN="OFF" -G "Visual Studio 16 2019" \
+                      -DFORCED_SIMD_INSTRUCTIONS=SSE2 -DFSO_BUILD_FRED2="ON" -DFSO_BUILD_WITH_VULKAN="OFF" -G "Visual Studio 16 2019" \
                       -DFSO_BUILD_QTFRED=OFF -T "v142" -A "$ARCHITECTURE" ..
               else
                   cmake -DFSO_USE_SPEECH="ON" -DFSO_FATAL_WARNINGS="ON" -DFSO_USE_VOICEREC="OFF" -DFSO_BUILD_TESTS="ON" \
-                      -DMSVC_SIMD_INSTRUCTIONS=SSE2 -DFSO_BUILD_FRED2="ON" -G "Visual Studio 16 2019" \
+                      -DFORCED_SIMD_INSTRUCTIONS=SSE2 -DFSO_BUILD_FRED2="ON" -G "Visual Studio 16 2019" \
                       -DFSO_BUILD_QTFRED=OFF -T "v142" -A "$ARCHITECTURE" ..
               fi
           fi

ci/linux/configure_cmake.sh

@@ -21,16 +21,13 @@ if [ "$RUNNER_OS" = "macOS" ]; then
     PLATFORM_CMAKE_OPTIONS="-DFSO_BUILD_WITH_VULKAN=OFF"
     export CMAKE_OSX_ARCHITECTURES="$ARCHITECTURE"
 else
-    CXXFLAGS="-m64 -mtune=generic -mfpmath=sse -msse -msse2 -pipe -Wno-unknown-pragmas -static-libstdc++"
-    CFLAGS="-m64 -mtune=generic -mfpmath=sse -msse -msse2 -pipe -Wno-unknown-pragmas"
-    PLATFORM_CMAKE_OPTIONS="-DFSO_BUILD_APPIMAGE=ON"
+    PLATFORM_CMAKE_OPTIONS="-DFSO_BUILD_APPIMAGE=ON -DFORCED_SIMD_INSTRUCTIONS=SSE2 -DUSE_STATIC_LIBCXX=ON"
 fi
 
 CMAKE_OPTIONS="$JOB_CMAKE_OPTIONS"
 if [[ "$COMPILER" =~ ^clang.*$ ]]; then
     CMAKE_OPTIONS="$CMAKE_OPTIONS -DCLANG_USE_LIBCXX=ON"
     # force clang to silently allow -static-libstdc++ flag
-    CXXFLAGS="$CXXFLAGS -Qunused-arguments"
 fi
 
 if [ ! "$CCACHE_PATH" = "" ]; then

cmake/cpufeatures.cpp

@@ -2,50 +2,72 @@
 #ifdef _WIN32
 #include <intrin.h>
 //  Windows
-#define cpuid    __cpuid
+#define cpuid    __cpuidex
+#define xgetbv   _xgetbv
 
 #else
 
+#include <cstdint>
+
 //  GCC Inline Assembly
-void cpuid(int CPUInfo[4],int InfoType){
+void cpuid(int CPUInfo[4], int InfoType, int SubType){
     __asm__ __volatile__ (
         "cpuid":
         "=a" (CPUInfo[0]),
         "=b" (CPUInfo[1]),
         "=c" (CPUInfo[2]),
         "=d" (CPUInfo[3]) :
-        "a" (InfoType)
+        "a" (InfoType),
+		"c" (SubType)
     );
 }
 
+uint64_t xgetbv(uint32_t xcr) {
+	uint32_t lower, higher;
+	__asm__ __volatile__ (
+		"xgetbv":
+		"=a"(lower),
+		"=d"(higher) :
+		"c"(xcr)
+	);
+	return (static_cast<uint64_t>(higher) << static_cast<uint64_t>(32)) | static_cast<uint64_t>(lower);
+}
+
 #endif
 
 #include <iostream>
 
 int main( int argc, char* argv[] )
 {
-	int SSE     = false;
-	int SSE2    = false;
-	int AVX     = false;
-	int AVX2    = false;
+	bool SSE     = false;
+	bool SSE2    = false;
+	bool OSXSAVE = false;
+	bool AVX     = false;
+	bool AVX2    = false;
 
 	int info[4];
-	cpuid(info, 0);
+	cpuid(info, 0, 0);
 	int nIds = info[0];
 
 	//  Detect Instruction Set
 	if (nIds >= 1){
-		cpuid(info,0x00000001);
-		SSE   = (info[3] & ((int)1 << 25)) != 0;
-		SSE2  = (info[3] & ((int)1 << 26)) != 0;
-
-		AVX   = (info[2] & ((int)1 << 28)) != 0;
+		cpuid(info, 0x00000001, 0);
+		SSE     = (info[3] & ((int)1 << 25)) != 0;
+		SSE2    = (info[3] & ((int)1 << 26)) != 0;
+		OSXSAVE = (info[2] & ((int)1 << 27)) != 0;
+		AVX     = (info[2] & ((int)1 << 28)) != 0;
 	}
 	if (nIds >= 7){
-		cpuid(info,0x00000007);
+		cpuid(info,0x00000007, 0);
 		AVX2  = (info[1] & ((int)1 <<  5)) != 0;
 	}
 
+	//  Detect OS Support
+	if (!OSXSAVE || (xgetbv(0) & 0x6) == 0) {
+		AVX = false;
+		AVX2 = false;
+	}
+
 	if (AVX2)
 		std::cout << "AVX2";
 	else if(AVX)

cmake/globals.cmake

@@ -31,3 +31,8 @@ else()
         set(IS_RISCV TRUE)
     endif()
 endif()
+
+set(IS_X86 FALSE)
+if (NOT IS_ARM64 AND NOT IS_RISCV)
+    set(IS_X86 TRUE)
+endif()

cmake/toolchain-clang.cmake

@@ -9,16 +9,41 @@ option(CLANG_ENABLE_ADDRESS_SANITIZER "Enable -fsanitize=address" OFF)
 
 option(CLANG_USE_LIBCXX "Use libc++" OFF)
 
-# Clang does not support -march=native for RISC-V
-if(IS_RISCV)
-	# You do not need to pass a -march, passing nothing will make clang to choose itself.
-	# If you want a specific set of instructions like vectors, set -march in CFLAGS and CXXFLAGS env variables
-	set(C_BASE_FLAGS "-pipe")
-	set(CXX_BASE_FLAGS "-pipe")
-else()
-	# These are the default values
-	set(C_BASE_FLAGS "-march=native -pipe")
-	set(CXX_BASE_FLAGS "-march=native -pipe")
+# These are the default values
+set(C_BASE_FLAGS "-pipe")
+set(CXX_BASE_FLAGS "-pipe")
+
+if(IS_X86)
+	if(FORCED_NATIVE_SIMD_INSTRUCTIONS)
+		set(CLANG_EXTENSIONS "-march=native")
+	elseif (FSO_INSTRUCTION_SET STREQUAL "")
+		set(CLANG_EXTENSIONS "-march=x86-64")
+	elseif (FSO_INSTRUCTION_SET STREQUAL "SSE")
+		set(CLANG_EXTENSIONS "-march=x86-64 -msse -mfpmath=sse")
+	elseif (FSO_INSTRUCTION_SET STREQUAL "SSE2")
+		set(CLANG_EXTENSIONS "-march=x86-64 -msse -msse2 -mfpmath=sse")
+	elseif (FSO_INSTRUCTION_SET STREQUAL "AVX")
+		set(CLANG_EXTENSIONS "-march=x86-64-v2 -msse -msse2 -mavx -mfpmath=sse")
+	elseif (FSO_INSTRUCTION_SET STREQUAL "AVX2")
+		set(CLANG_EXTENSIONS "-march=x86-64-v3 -msse -msse2 -mavx -mavx2 -mfpmath=sse")
+	else ()
+		message( FATAL_ERROR "Unknown instruction set encountered for clang. Update toolchain-clang.cmake!" )
+	endif()
+
+	set(C_BASE_FLAGS "${C_BASE_FLAGS} ${CLANG_EXTENSIONS}")
+	set(CXX_BASE_FLAGS "${CXX_BASE_FLAGS} ${CLANG_EXTENSIONS}")
+elseif(IS_ARM)
+	if(FORCED_NATIVE_SIMD_INSTRUCTIONS)
+		set(C_BASE_FLAGS "${C_BASE_FLAGS} -march=native")
+		set(CXX_BASE_FLAGS "${CXX_BASE_FLAGS} -march=native")
+    endif ()
+elseif(IS_RISCV)
+    # Default C/CXX_BASE_FLAGS are fine for RISC-V
+endif()
+
+if (USE_STATIC_LIBCXX)
+	set(CXX_BASE_FLAGS "${CXX_BASE_FLAGS} -static-libstdc++ -Qunused-arguments")
+	set(CLANG_USE_LIBCXX ON)
 endif()
 
 # For C and C++, the values can be overwritten independently
@@ -43,10 +68,6 @@ set(COMPILER_FLAGS "${COMPILER_FLAGS} ${_flags}")
 
 set(COMPILER_FLAGS "${COMPILER_FLAGS} -fsigned-char -Wno-unknown-pragmas")
 
-# Omit "argument unused during compilation" when clang is used with ccache.
-if(${CMAKE_CXX_COMPILER} MATCHES "ccache")
-	set(COMPILER_FLAGS "${COMPILER_FLAGS} -Qunused-arguments")
-endif()
 
 if ("${CMAKE_GENERATOR}" STREQUAL "Ninja")
 	# Force color diagnostics for Ninja generator

cmake/toolchain-gcc.cmake

@@ -11,18 +11,49 @@ option(GCC_ENABLE_SANITIZE_UNDEFINED "Enable -fsanitize=undefined" OFF)
 option(GCC_USE_GOLD "Use the gold linker instead of the standard linker" OFF)
 option(GCC_GENERATE_GDB_INDEX "Adds linker option to generate the gdb index for debug builds" OFF)
 
-# GCC does not support -march=native in RISC-V
-if(IS_RISCV)
-	# You do not need to pass a -march, passing nothing will make gcc to choose itself.
-	# If you want a specific set of instructions like vectors, set -march in CFLAGS and CXXFLAGS env variables
-	# Example for vectors: -march=rv64gcv
+# These are the default values
+set(C_BASE_FLAGS "-pipe")
+set(CXX_BASE_FLAGS "-pipe")
+
+if(IS_X86)
+	if(FORCED_NATIVE_SIMD_INSTRUCTIONS)
+		set(GCC_EXTENSIONS "-march=native")
+	elseif (FSO_INSTRUCTION_SET STREQUAL "")
+		set(GCC_EXTENSIONS "-march=x86-64")
+	elseif (FSO_INSTRUCTION_SET STREQUAL "SSE")
+		set(GCC_EXTENSIONS "-march=x86-64 -msse -mfpmath=sse")
+	elseif (FSO_INSTRUCTION_SET STREQUAL "SSE2")
+		set(GCC_EXTENSIONS "-march=x86-64 -msse -msse2 -mfpmath=sse")
+	elseif (FSO_INSTRUCTION_SET STREQUAL "AVX")
+		set(GCC_EXTENSIONS "-march=x86-64-v2 -msse -msse2 -mavx -mfpmath=sse")
+	elseif (FSO_INSTRUCTION_SET STREQUAL "AVX2")
+		set(GCC_EXTENSIONS "-march=x86-64-v3 -msse -msse2 -mavx -mavx2 -mfpmath=sse")
+	else ()
+		message( FATAL_ERROR "Unknown instruction set encountered for GCC. Update toolchain-gcc.cmake!" )
+	endif()
+
+	set(C_BASE_FLAGS "${C_BASE_FLAGS} ${GCC_EXTENSIONS}")
+	set(CXX_BASE_FLAGS "${CXX_BASE_FLAGS} ${GCC_EXTENSIONS}")
+elseif(IS_ARM)
+	if(FORCED_NATIVE_SIMD_INSTRUCTIONS)
+		set(C_BASE_FLAGS "${C_BASE_FLAGS} -march=native")
+		set(CXX_BASE_FLAGS "${CXX_BASE_FLAGS} -march=native")
+    endif ()
+elseif(IS_RISCV)
+    # You do not need to pass a -march, passing nothing will make gcc to choose itself.
+    # If you want a specific set of instructions like vectors, set -march in CFLAGS and CXXFLAGS env variables
+    # Example for vectors: -march=rv64gcv
     # https://gcc.gnu.org/onlinedocs/gcc/RISC-V-Options.html
-	set(C_BASE_FLAGS "-pipe")
-	set(CXX_BASE_FLAGS "-pipe")
-else()
-	# These are the default values
-	set(C_BASE_FLAGS "-march=native -pipe")
-	set(CXX_BASE_FLAGS "-march=native -pipe")
+    # As such, default C/CXX_BASE_FLAGS are sufficient.
+endif()
+
+if (IS_64BIT)
+	set(C_BASE_FLAGS "${C_BASE_FLAGS} -m64")
+	set(CXX_BASE_FLAGS "${CXX_BASE_FLAGS} -m64")
+endif()
+
+if (USE_STATIC_LIBCXX)
+	set(CXX_BASE_FLAGS "${CXX_BASE_FLAGS} -static-libstdc++")
 endif()
 
 # For C and C++, the values can be overwritten independently

cmake/toolchain-msvc.cmake

@@ -95,49 +95,31 @@ ENDIF(MSVC_USE_RUNTIME_DLL)
 INCLUDE(MSVCMultipleProcessCompile)
 
 # Visual Studio supports compiling for multiple vector instruction sets
-SET(POSSIBLE_INSTUCTION_SETS "" SSE SSE2 AVX AVX2)
 
-if (NOT DEFINED MSVC_SIMD_INSTRUCTIONS)
-	detect_simd_instructions(MSVC_DETECTED_SIMD_INSTRUCTIONS)
+if(IS_X86)
+	if(FORCED_NATIVE_SIMD_INSTRUCTIONS)
+		# MSVC has no direct -march=native equivalent, so just use the detected extensions.
+		SET(FSO_INSTRUCTION_SET ${DETECTED_SIMD_INSTRUCTIONS})
+	endif()
+
+	if(FSO_INSTRUCTION_SET STREQUAL "")
+		set(MSVC_SIMD_INSTRUCTIONS "IA32")
+	else()
+		set(MSVC_SIMD_INSTRUCTIONS ${FSO_INSTRUCTION_SET})
+	endif()
+
+	if (NOT (IS_64BIT AND (MSVC_SIMD_INSTRUCTIONS STREQUAL "IA32" OR MSVC_SIMD_INSTRUCTIONS STREQUAL "SSE" OR MSVC_SIMD_INSTRUCTIONS STREQUAL "SSE2")))
+		# 32-Bit and SSE(2) mustn't be set, as these are implied in x86_64 and thus MSVC does not support it for the /arch argument
+		CHECK_CXX_COMPILER_FLAG("/arch:${MSVC_SIMD_INSTRUCTIONS}" COMPILER_SUPPORTS_ARCH)
+
+		IF(COMPILER_SUPPORTS_ARCH)
+			set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /arch:${MSVC_SIMD_INSTRUCTIONS}")
+			set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /arch:${MSVC_SIMD_INSTRUCTIONS}")
+		ELSE()
+			message( FATAL_ERROR "Your version of MSVC does not support the requested instruction set. Consider updating!" )
+		ENDIF()
+	endif()
 
-	SET(MSVC_SIMD_INSTRUCTIONS "${MSVC_DETECTED_SIMD_INSTRUCTIONS}" CACHE FILEPATH "The SIMD instructions which will be used, possible values are ${POSSIBLE_INSTUCTION_SETS}")
-	MARK_AS_ADVANCED(FORCE MSVC_SIMD_INSTRUCTIONS)
-endif()
-set(FSO_INSTRUCTION_SET ${MSVC_SIMD_INSTRUCTIONS})
-
-LIST(FIND POSSIBLE_INSTUCTION_SETS "${MSVC_SIMD_INSTRUCTIONS}" SET_INDEX)
-
-if (SET_INDEX LESS 0)
-	MESSAGE(STATUS "An invalid instruction set was specified, defaulting to no special compiler options.")
-else()
-	IF (NOT SET_INDEX EQUAL 0)
-		SET(FOUND)
-
-		FOREACH(list_index RANGE ${SET_INDEX} 1)
-			list(GET POSSIBLE_INSTUCTION_SETS ${list_index} _simd_set)
-			CHECK_CXX_COMPILER_FLAG("/arch:${_simd_set}" COMPILER_SUPPORTS_ARCH_${_simd_set})
-
-			IF(COMPILER_SUPPORTS_ARCH_${_simd_set})
-				set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /arch:${_simd_set}")
-				set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /arch:${_simd_set}")
-
-				SET(FOUND TRUE)
-				BREAK()
-			ENDIF()
-		ENDFOREACH(list_index)
-
-		IF(NOT FOUND)
-			# Don't set anything, it will likely not work
-			MESSAGE(STATUS "Your compiler does not support any optimization flags, defaulting to none")
-		ENDIF(NOT FOUND)
-	ELSE()
-		CHECK_CXX_COMPILER_FLAG("/arch:IA32" COMPILER_SUPPORTS_ARCH_IA32)
-
-		IF(COMPILER_SUPPORTS_ARCH_IA32)
-			set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /arch:IA32")
-			set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /arch:IA32")
-		ENDIF(COMPILER_SUPPORTS_ARCH_IA32)
-	ENDIF()
 endif()
 
 target_compile_definitions(compiler INTERFACE _CRT_SECURE_NO_DEPRECATE _CRT_SECURE_NO_WARNINGS _SECURE_SCL=0 NOMINMAX