- Overview
- Module Description - What the module does and why it is useful
- Setup - The basics of getting started with rabbitmq
- Usage - Configuration options and additional functionality
- Reference - An under-the-hood peek at what the module is doing and how
- Limitations - OS compatibility, etc.
- Development - Guide for contributing to the module
This module manages RabbitMQ (www.rabbitmq.com)
The rabbitmq module sets up rabbitmq and has a number of providers to manage everything from vhosts to exchanges after setup.
This module has been tested against 2.7.1 and is known to not support all features against earlier versions.
- rabbitmq repository files.
- rabbitmq package.
- rabbitmq configuration file.
- rabbitmq service.
include '::rabbitmq'All options and configuration can be done through interacting with the parameters on the main rabbitmq class. These are documented below.
To begin with the rabbitmq class controls the installation of rabbitmq. In here you can control many parameters relating to the package and service, such as disabling puppet support of the service:
class { '::rabbitmq':
service_manage => false,
port => '5672',
delete_guest_user => true,
}Or such as offline installation from intranet or local mirrors:
class { '::rabbitmq':
key_content => template('openstack/rabbit.pub.key'),
package_gpg_key => '/tmp/rabbit.pub.key',
}And this one will use external package key source for any (apt/rpm) package provider:
class { '::rabbitmq':
package_gpg_key => 'http://www.some_site.some_domain/some_key.pub.key',
}To use RabbitMQ Environment Variables, use the parameters environment_variables e.g.:
class { 'rabbitmq':
port => '5672',
environment_variables => {
'NODENAME' => 'node01',
'SERVICENAME' => 'RabbitMQ'
}
}To change RabbitMQ Config Variables in rabbitmq.config, use the parameters config_variables e.g.:
class { 'rabbitmq':
port => '5672',
config_variables => {
'hipe_compile' => true,
'frame_max' => 131072,
'log_levels' => "[{connection, info}]"
}
}To change Erlang Kernel Config Variables in rabbitmq.config, use the parameters
config_kernel_variables e.g.:
class { 'rabbitmq':
port => '5672',
config_kernel_variables => {
'inet_dist_listen_min' => 9100,
'inet_dist_listen_max' => 9105,
}
}To change Management Plugin Config Variables in rabbitmq.config, use the parameters
config_management_variables e.g.:
class { 'rabbitmq':
config_management_variables => {
'rates_mode' => 'basic',
}
}To use RabbitMQ clustering facilities, use the rabbitmq parameters
config_cluster, cluster_nodes, and cluster_node_type, e.g.:
class { 'rabbitmq':
config_cluster => true,
cluster_nodes => ['rabbit1', 'rabbit2'],
cluster_node_type => 'ram',
erlang_cookie => 'A_SECRET_COOKIE_STRING',
wipe_db_on_cookie_change => true,
}- rabbitmq: Main class for installation and service management.
- rabbitmq::config: Main class for rabbitmq configuration/management.
- rabbitmq::install: Handles package installation.
- rabbitmq::params: Different configuration data for different systems.
- rabbitmq::service: Handles the rabbitmq service.
- rabbitmq::repo::apt: Handles apt repo for Debian systems.
- rabbitmq::repo::rhel: Handles rpm repo for Redhat systems.
####admin_enable
Boolean, if enabled sets up the management interface/plugin for RabbitMQ.
####auth_backends
An array specifying authorization/authentication backend to use. Syntax: single quotes should be placed around array entries, ex. ['{foo, baz}', 'baz'] Defaults to [rabbit_auth_backend_internal], and if using LDAP defaults to [rabbit_auth_backend_internal, rabbit_auth_backend_ldap].
####cluster_node_type
Choose between disc and ram nodes.
####cluster_nodes
An array of nodes for clustering.
####cluster_partition_handling
Value to set for cluster_partition_handling RabbitMQ configuration variable.
####config
The file to use as the rabbitmq.config template.
####config_cluster
Boolean to enable or disable clustering support.
####config_kernel_variables
Hash of Erlang kernel configuration variables to set (see Variables Configurable in rabbitmq.config).
####config_mirrored_queues
DEPRECATED
Configuring queue mirroring should be done by setting the according policy for the queue. You can read more about it here
####config_path
The path to write the RabbitMQ configuration file to.
####config_management_variables
Hash of configuration variables for the Management Plugin.
####config_stomp
Boolean to enable or disable stomp.
####config_shovel
Boolean to enable or disable shovel.
####config_shovel_statics
Hash of static shovel configurations
####config_variables
To set config variables in rabbitmq.config
####default_user
Username to set for the default_user in rabbitmq.config.
####default_pass
Password to set for the default_user in rabbitmq.config.
####delete_guest_user
Boolean to decide if we should delete the default guest user.
####env_config
The template file to use for rabbitmq_env.config.
####env_config_path
The path to write the rabbitmq_env.config file to.
####environment_variables
RabbitMQ Environment Variables in rabbitmq_env.config
####erlang_cookie
The erlang cookie to use for clustering - must be the same between all nodes. This value has no default and must be set explicitly if using clustering. If you run Pacemaker and you don't want to use RabbitMQ buildin cluster, you can set config_cluster to 'False' and set 'erlang_cookie'.
####file_limit
Set rabbitmq file ulimit. Defaults to 16384. Only available on systems with
$::osfamily == 'Debian' or $::osfamily == 'RedHat'.
####heartbeat
Set the heartbeat timeout interval, default is unset which uses the builtin server
defaultsof 60 seconds. Setting this to 0 will disable heartbeats.
####key_content
Uses content method for Debian OS family. Should be a template for apt::source
class. Overrides package_gpg_key behavior, if enabled. Undefined by default.
####ldap_auth
Boolean, set to true to enable LDAP auth.
####ldap_server
LDAP server to use for auth.
####ldap_user_dn_pattern
User DN pattern for LDAP auth.
####ldap_other_bind
How to bind to the LDAP server. Defaults to 'anon'.
####ldap_config_variables
Hash of other LDAP config variables.
####ldap_use_ssl
Boolean, set to true to use SSL for the LDAP server.
####ldap_port
Numeric port for LDAP server.
####ldap_log
Boolean, set to true to log LDAP auth.
####manage_repos
Boolean, whether or not to manage package repositories.
####management_port
The port for the RabbitMQ management interface.
####management_ssl
Enable/Disable SSL for the management port. Has an effect only if ssl => true. Default is true. Valid values are true or false.
####node_ip_address
The value of NODE_IP_ADDRESS in rabbitmq_env.config
####package_ensure
Determines the ensure state of the package. Set to installed by default, but could be changed to latest.
####package_gpg_key
RPM package GPG key to import. Uses source method. Should be a URL for Debian/RedHat
OS family, or a file name for RedHat OS family.
Set to http://www.rabbitmq.com/rabbitmq-signing-key-public.asc by default.
Note, that key_content, if specified, would override this parameter for Debian OS family.
####package_name
The name of the package to install.
####package_provider
What provider to use to install the package.
####package_source
Where should the package be installed from?
On Debian- and Arch-based systems using the default package provider, this parameter is ignored and the package is installed from the rabbitmq repository, if enabled with manage_repo => true, or from the system repository otherwise. If you want to use dpkg as the package_provider, you must specify a local package_source.
####plugin_dir
Location of RabbitMQ plugins.
####port
The RabbitMQ port.
####service_ensure
The state of the service.
####service_manage
Determines if the service is managed.
####service_name
The name of the service to manage.
####ssl
Configures the service for using SSL.
####ssl_only
Configures the service to only use SSL. No cleartext TCP listeners will be created. Requires that ssl => true and port => UNSET also
####ssl_cacert
CA cert path to use for SSL.
####ssl_cert
Cert to use for SSL.
####ssl_key
Key to use for SSL.
####ssl_management_port
SSL management port.
####ssl_stomp_port
SSL stomp port.
####ssl_verify
rabbitmq.config SSL verify setting.
####ssl_fail_if_no_peer_cert
rabbitmq.config fail_if_no_peer_cert setting.
####ssl_versions
Choose which SSL versions to enable. Example: ['tlsv1.2', 'tlsv1.1'].
Note that it is recommended to disable sslv3 and tlsv1 to prevent against POODLE and BEAST attacks. Please see the RabbitMQ SSL documentation for more information.
####ssl_ciphers
Support only a given list of SSL ciphers. Example: ['dhe_rsa,aes_256_cbc,sha','dhe_dss,aes_256_cbc,sha','ecdhe_rsa,aes_256_cbc,sha'].
Supported ciphers in your install can be listed with: rabbitmqctl eval 'ssl:cipher_suites().' Functionality can be tested with cipherscan or similar tool: https://github.com/jvehent/cipherscan.git
####stomp_port
The port to use for Stomp.
####stomp_ssl_only
Configures STOMP to only use SSL. No cleartext STOMP TCP listeners will be created. Requires setting ssl_stomp_port also.
####stomp_ensure
Boolean to install the stomp plugin.
####tcp_keepalive
Boolean to enable TCP connection keepalive for RabbitMQ service.
####version
Sets the version to install.
On Debian- and Arch-based operating systems, the version parameter is ignored and the latest version is installed from the rabbitmq repository, if enabled with manage_repo => true, or from the system repository otherwise.
####wipe_db_on_cookie_change
Boolean to determine if we should DESTROY AND DELETE the RabbitMQ database.
####rabbitmq_user
String: OS dependent, default defined in param.pp. The system user the rabbitmq daemon runs as.
####rabbitmq_group
String: OS dependent, default defined in param.pp. The system group the rabbitmq daemon runs as.
####rabbitmq_home
String: OS dependent. default defined in param.pp. The home directory of the rabbitmq deamon.
query all current users: $ puppet resource rabbitmq_user
rabbitmq_user { 'dan':
admin => true,
password => 'bar',
}Optional parameter tags will set further rabbitmq tags like monitoring, policymaker, etc. To set the administrator tag use admin-flag.
rabbitmq_user { 'dan':
admin => true,
password => 'bar',
tags => ['monitoring', 'tag1'],
}query all current vhosts: $ puppet resource rabbitmq_vhost
rabbitmq_vhost { 'myvhost':
ensure => present,
}rabbitmq_exchange { 'myexchange@myvhost':
user => 'dan',
password => 'bar',
type => 'topic',
ensure => present,
internal => false,
auto_delete => false,
durable => true,
arguments => {
hash-header => 'message-distribution-hash'
}
}rabbitmq_queue { 'myqueue@myvhost':
user => 'dan',
password => 'bar',
durable => true,
auto_delete => false,
arguments => {
x-message-ttl => 123,
x-dead-letter-exchange => 'other'
},
ensure => present,
}rabbitmq_binding { 'myexchange@myqueue@myvhost':
user => 'dan',
password => 'bar',
destination_type => 'queue',
routing_key => '#',
arguments => {},
ensure => present,
}rabbitmq_user_permissions { 'dan@myvhost':
configure_permission => '.*',
read_permission => '.*',
write_permission => '.*',
}rabbitmq_policy { 'ha-all@myvhost':
pattern => '.*',
priority => 0,
applyto => 'all',
definition => {
'ha-mode' => 'all',
'ha-sync-mode' => 'automatic',
},
}query all currently enabled plugins $ puppet resource rabbitmq_plugin
rabbitmq_plugin {'rabbitmq_stomp':
ensure => present,
} rabbitmq_parameter { 'documentumShovel@/':
component_name => '',
value => {
'src-uri' => 'amqp://',
'src-queue' => 'my-queue',
'dest-uri' => 'amqp://remote-server',
'dest-queue' => 'another-queue',
},
}
rabbitmq_parameter { 'documentumFed@/':
component_name => 'federation-upstream',
value => {
'uri' => 'amqp://myserver',
'expires' => '360000',
},
}This is essentially a private type used by the rabbitmq::config class to manage the erlang cookie. It replaces the rabbitmq_erlang_cookie fact from earlier versions of this module. It manages the content of the cookie usually located at "${rabbitmq_home}/.erlang.cookie", which includes stopping the rabbitmq service and wiping out the database at "${rabbitmq_home}/mnesia" if the user agrees to it. We don't recommend using this type directly.
This module has been built on and tested against Puppet 3.x.
The module has been tested on:
- RedHat Enterprise Linux 5/6
- Debian 6/7
- CentOS 5/6
- Ubuntu 12.04/14.04
Testing on other platforms has been light and cannot be guaranteed.
While this module supports both 1.x and 2.x versions of the puppetlabs-apt module, it does not support puppetlabs-apt 2.0.0 or 2.0.1.
If running CentOS/RHEL, and using the yum provider, ensure the epel repo is present.
To have a suitable erlang version installed on RedHat and Debian systems, you have to install another puppet module from http://forge.puppetlabs.com/garethr/erlang with:
puppet module install garethr-erlang
This module handles the packages for erlang. To use the module, add the following snippet to your site.pp or an appropriate profile class:
For RedHat systems:
include 'erlang'
class { 'erlang': epel_enable => true}
For Debian systems:
include 'erlang'
package { 'erlang-base':
ensure => 'latest',
}
This module also depends on the excellent nanliu/staging module on the Forge:
puppet module install nanliu-staging
Be advised that there were configuration file syntax and other changes made between RabbitMQ
versions 2 and 3. In order to downgrade from 3 to 2 (not that this is a terribly good idea)
you will need to manually remove all RabbitMQ configuration files (/etc/rabbitmq) and
the mnesia directory (usually /var/lib/rabbitmq/mnesia). The latter action will delete
any and all messages stored to disk.
Failure to do this will result in RabbitMQ failing to start with a cryptic error message about "init terminating in do_boot", containing "rabbit_upgrade,maybe_upgrade_mnesia".
Puppet Labs modules on the Puppet Forge are open projects, and community contributions are essential for keeping them great. We can’t access the huge number of platforms and myriad of hardware, software, and deployment configurations that Puppet is intended to serve.
We want to keep it as easy as possible to contribute changes so that our modules work in your environment. There are a few guidelines that we need contributors to follow so that we can have a chance of keeping on top of things.
You can read the complete module contribution guide on the Puppet Labs wiki.
- Jeff McCune [email protected]
- Dan Bode [email protected]
- RPM/RHEL packages by Vincent Janelle [email protected]
- Puppetlabs Module Team