Add XIP cache maintenance API (fixes #2005)

docs/index.h

@@ -46,6 +46,7 @@
  * \cond hardware_uart \defgroup hardware_uart hardware_uart \endcond
  * \cond hardware_vreg \defgroup hardware_vreg hardware_vreg \endcond
  * \cond hardware_watchdog \defgroup hardware_watchdog hardware_watchdog \endcond
+ * \cond hardware_xip_cache \defgroup hardware_xip_cache hardware_xip_cache \endcond
  * \cond hardware_xosc \defgroup hardware_xosc hardware_xosc \endcond
  * \cond hardware_powman hardware_powman
  * \cond hardware_hazard3 hardware_hazard3

src/cmake/rp2_common.cmake

@@ -60,6 +60,7 @@ pico_add_subdirectory(rp2_common/hardware_timer)
 pico_add_subdirectory(rp2_common/hardware_uart)
 pico_add_subdirectory(rp2_common/hardware_vreg)
 pico_add_subdirectory(rp2_common/hardware_watchdog)
+pico_add_subdirectory(rp2_common/hardware_xip_cache)
 pico_add_subdirectory(rp2_common/hardware_xosc)
 
 if (PICO_RP2350 OR PICO_COMBINED_DOCS)

src/rp2_common/hardware_flash/CMakeLists.txt

@@ -1,2 +1,3 @@
 pico_simple_hardware_target(flash)
 pico_mirrored_target_link_libraries(hardware_flash INTERFACE pico_bootrom)
+pico_mirrored_target_link_libraries(hardware_flash INTERFACE hardware_xip_cache)

src/rp2_common/hardware_flash/flash.c

@@ -13,6 +13,7 @@
 #else
 #include "hardware/structs/qmi.h"
 #endif
+#include "hardware/xip_cache.h"
 
 #define FLASH_BLOCK_ERASE_CMD 0xd8
 
@@ -84,6 +85,8 @@ void __no_inline_not_in_flash_func(flash_range_erase)(uint32_t flash_offs, size_
     rom_flash_flush_cache_fn flash_flush_cache_func = (rom_flash_flush_cache_fn)rom_func_lookup_inline(ROM_FUNC_FLASH_FLUSH_CACHE);
     assert(connect_internal_flash_func && flash_exit_xip_func && flash_range_erase_func && flash_flush_cache_func);
     flash_init_boot2_copyout();
+    // Commit any pending writes to external RAM, to avoid losing them in the subsequent flush:
+    xip_cache_clean_all();
 
     // No flash accesses after this point
     __compiler_memory_barrier();
@@ -112,6 +115,7 @@ void __no_inline_not_in_flash_func(flash_range_program)(uint32_t flash_offs, con
     rom_flash_flush_cache_fn flash_flush_cache_func = (rom_flash_flush_cache_fn)rom_func_lookup_inline(ROM_FUNC_FLASH_FLUSH_CACHE);
     assert(connect_internal_flash_func && flash_exit_xip_func && flash_range_program_func && flash_flush_cache_func);
     flash_init_boot2_copyout();
+    xip_cache_clean_all();
 
     __compiler_memory_barrier();
 
@@ -152,6 +156,8 @@ void __no_inline_not_in_flash_func(flash_do_cmd)(const uint8_t *txbuf, uint8_t *
     rom_flash_flush_cache_fn flash_flush_cache_func = (rom_flash_flush_cache_fn)rom_func_lookup_inline(ROM_FUNC_FLASH_FLUSH_CACHE);
     assert(connect_internal_flash_func && flash_exit_xip_func && flash_flush_cache_func);
     flash_init_boot2_copyout();
+    xip_cache_clean_all();
+
     __compiler_memory_barrier();
     connect_internal_flash_func();
     flash_exit_xip_func();

src/rp2_common/hardware_xip_cache/CMakeLists.txt

@@ -0,0 +1,3 @@
+pico_simple_hardware_target(xip_cache)
+
+pico_mirrored_target_link_libraries(hardware_xip_cache INTERFACE hardware_sync)

src/rp2_common/hardware_xip_cache/include/hardware/xip_cache.h

@@ -0,0 +1,210 @@
+/*
+ * Copyright (c) 2024 Raspberry Pi Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef _HARDWARE_XIP_CACHE_H
+#define _HARDWARE_XIP_CACHE_H
+
+#include "pico.h"
+#include "hardware/regs/addressmap.h"
+
+/** \file xip_cache.h
+ *  \defgroup hardware_xip_cache hardware_xip_cache
+ *
+ * \brief Low-level cache maintenance operations for the XIP cache
+ *
+ * These functions apply some maintenance operation to either the entire cache contents, or a range
+ * of offsets within the downstream address space. Offsets start from 0 (indicating the first byte
+ * of flash), so pointers should have XIP_BASE subtracted before passing into one of these
+ * functions.
+ *
+ * \if rp2040-specific
+ * The only valid cache maintenance operation on RP2040 is "invalidate", which tells the cache to
+ * forget everything it knows about some address. This is necessary after a programming operation,
+ * because the cache does not automatically know about any serial programming operations performed
+ * on the external flash device, and could return stale data.
+ * \endif
+ *
+ * \if rp2350-specific
+ * On RP2350, the three types of operation are:
+ *
+ * * Invalidate: tell the cache to forget everything it knows about some address. The next access to
+ *   that address will fetch from downstream memory.
+ *
+ * * Clean: if the addressed cache line contains data not yet written to external memory, then write
+ *   that data out now, and mark the line as "clean" (i.e. not containing uncommitted write data)
+ *
+ * * Pin: mark an address as always being resident in the cache. This persists until the line is
+ *   invalidated, and can be used to allocate part of the cache for cache-as-SRAM use.
+ *
+ * When using both external flash and external RAM (e.g. PSRAM), a simple way to maintain coherence
+ * over flash programming operations is to:
+ *
+ * 1. Clean the entire cache (e.g. using xip_cache_clean_all())
+ *
+ * 2. Erase + program the flash using serial SPI commands
+ *
+ * 3. Invalidate ("flush") the entire cache (e.g. using xip_cache_invalidate_all())
+ *
+ * The invalidate ensures the programming is visible to subsequent reads. The clean ensures that the
+ * invalidate does not discard any cached PSRAM write data.
+ *
+ * \endif
+ *
+ */
+
+// PICO_CONFIG: PARAM_ASSERTIONS_ENABLED_HARDWARE_XIP_CACHE, Enable/disable assertions in the hardware_xip_cache module, type=bool, default=0, group=hardware_xip_cache
+#ifndef PARAM_ASSERTIONS_ENABLED_HARDWARE_XIP_CACHE
+#define PARAM_ASSERTIONS_ENABLED_HARDWARE_XIP_CACHE 0
+#endif
+
+#define XIP_CACHE_LINE_SIZE _u(8)
+
+#define XIP_CACHE_SIZE (_u(16) * _u(1024))
+
+#if PICO_RP2040
+#define XIP_CACHE_ADDRESS_SPACE_SIZE (_u(16) * _u(1024) * _u(1024))
+#else
+#define XIP_CACHE_ADDRESS_SPACE_SIZE (XIP_END - XIP_BASE)
+#endif
+
+// A read-only cache never requires cleaning (you can still call the functions, they are just no-ops)
+#if PICO_RP2040
+#define XIP_CACHE_IS_READ_ONLY 1
+#else
+#define XIP_CACHE_IS_READ_ONLY 0
+#endif
+
+#ifndef __ASSEMBLER__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*! \brief Invalidate the cache for the entire XIP address space
+ *  \ingroup hardware_xip_cache
+ *
+ * Invalidation ensures that subsequent reads will fetch data from the downstream memory, rather
+ * than using (potentially stale) cached data.
+ *
+ * This function is faster than calling xip_cache_invalidate_range() for the entire address space,
+ * because it iterates over cachelines instead of addresses.
+ *
+ * @note Any pending write data held in the cache is lost: you can force the cache to commit these
+ *  writes first, by calling xip_cache_clean_all()
+ *
+ * @note Unlike flash_flush_cache(), this function affects *only* the cache line state.
+ *  flash_flush_cache() calls a ROM API which can have other effects on some platforms, like
+ *  cleaning up the bootrom's QSPI GPIO setup on RP2040. Prefer this function for general cache
+ *  maintenance use, and prefer flash_flush_cache in sequences of ROM flash API calls.
+ */
+void xip_cache_invalidate_all(void);
+
+/*! \brief Invalidate a range of offsets within the XIP address space
+ *  \ingroup hardware_xip_cache
+ *
+ * \param start_offset The first offset to be invalidated. Offset 0 means the first byte of XIP
+ *  memory (e.g. flash). Pointers must have XIP_BASE subtracted before passing into this function.
+ *  Must be 4-byte-aligned on RP2040. Must be a aligned to the start of a cache line
+ *  (XIP_CACHE_LINE_SIZE) on other platforms.
+ *
+ * \param size_bytes The number of bytes to invalidate. Must be a multiple of 4 bytes on RP2040.
+ *  Must be a multiple of XIP_CACHE_LINE_SIZE on other platforms.
+ *
+ * Invalidation ensures that subsequent reads will fetch data from the downstream memory, rather
+ * than using (potentially stale) cached data.
+
+ * @note Any pending write data held in the cache is lost: you can force the cache to commit these
+ *  writes first, by calling xip_cache_clean_range() with the same parameters. Generally this is
+ *  not necessary because invalidation is used with flash (write-behind via programming), and
+ *  cleaning is used with PSRAM (writing through the cache).
+ *
+ */
+void xip_cache_invalidate_range(uintptr_t start_offset, uintptr_t size_bytes);
+
+#if !XIP_CACHE_IS_READ_ONLY
+
+/*! \brief Clean the cache for the entire XIP address space
+ *  \ingroup hardware_xip_cache
+ *
+ * This causes the cache to write out all pending write data to the downstream memory. For example,
+ * when suspending the system with state retained in external PSRAM, this ensures all data has made
+ * it out to external PSRAM before powering down.
+ *
+ * This function is faster than calling xip_cache_clean_range() for the entire address space,
+ * because it iterates over cachelines instead of addresses.
+ *
+ * \if rp2040-specific
+ * On RP2040 this is a no-op, as the XIP cache is read-only. This is indicated by the
+ * XIP_CACHE_IS_READ_ONLY macro.
+ * \endif
+ *
+ * \if rp2350-specific
+ * On RP2350, due to the workaround applied for RP2350-E11, this function also effectively
+ * invalidates all cache lines after cleaning them. The next access to each line will miss. Avoid
+ * this by calling xip_cache_clean_range() which does not suffer this issue.
+ * \endif
+ *
+ */
+void xip_cache_clean_all(void);
+
+/*! \brief Clean a range of offsets within the XIP address space
+ *  \ingroup hardware_xip_cache
+ *
+ * This causes the cache to write out pending write data at these offsets to the downstream memory.
+ *
+ * \if rp2040-specific
+ * On RP2040 this is a no-op, as the XIP cache is read-only. This is indicated by the
+ * XIP_CACHE_IS_READ_ONLY macro.
+ * \endif
+ *
+ * \param start_offset The first offset to be invalidated. Offset 0 means the first byte of XIP
+ *  memory (e.g. flash). Pointers must have XIP_BASE subtracted before passing into this function.
+ *  Must be aligned to the start of a cache line (XIP_CACHE_LINE_SIZE).
+ *
+ * \param size_bytes The number of bytes to clean. Must be a multiple of XIP_CACHE_LINE_SIZE.
+ */
+void xip_cache_clean_range(uintptr_t start_offset, uintptr_t size_bytes);
+
+#else
+// Stub these out inline to avoid generating a call to an empty function when they are no-ops
+static inline void xip_cache_clean_all(void) {}
+static inline void xip_cache_clean_range(uintptr_t start_offset, uintptr_t size_bytes) {
+    (void)start_offset;
+    (void)size_bytes;
+}
+#endif
+
+#if !PICO_RP2040
+
+/*! \brief Pin a range of offsets within the XIP address space
+ *  \ingroup hardware_xip_cache
+ *
+ * Pinning a line at an address allocates the line exclusively for use at that address. This means
+ * that all subsequent accesses to that address will hit the cache, and will not go to downstream
+ * memory. This persists until one of two things happens:
+ *
+ * * The line is invalidated, e.g. via xip_cache_invalidate_all()
+ *
+ * * The same line is pinned at a different address (note lines are selected by address modulo
+ *   XIP_CACHE_SIZE)
+ *
+ * \param start_offset The first offset to be pinnned. Offset 0 means the first byte of XIP
+ *  memory (e.g. flash). Pointers must have XIP_BASE subtracted before passing into this function.
+ *  Must be aligned to the start of a cache line (XIP_CACHE_LINE_SIZE).
+ *
+ * \param size_bytes The number of bytes to pin. Must be a multiple of XIP_CACHE_LINE_SIZE.
+ *
+ */
+void xip_cache_pin_range(uintptr_t start_offset, uintptr_t size_bytes);
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // !__ASSEMBLER__
+
+#endif // !_HARDWARE_XIP_CACHE_H

src/rp2_common/hardware_xip_cache/xip_cache.c

@@ -0,0 +1,109 @@
+#include "hardware/xip_cache.h"
+#include "hardware/structs/xip.h"
+// For barrier macros:
+#include "hardware/sync.h"
+
+// Implementation-private constants (exporting these would create a compatibility headache as they
+// don't exist on all platforms; all of these operations are exposed through APIs anyways)
+
+#if !PICO_RP2040
+typedef enum {
+    XIP_CACHE_INVALIDATE_BY_SET_WAY = 0,
+    XIP_CACHE_CLEAN_BY_SET_WAY = 1,
+    XIP_CACHE_INVALIDATE_BY_ADDRESS = 2,
+    XIP_CACHE_CLEAN_BY_ADDRESS = 3,
+    XIP_CACHE_PIN_AT_ADDRESS = 7,
+    XIP_CACHE_OP_MAX = 7
+} cache_op_t;
+#endif
+
+// Used to ensure subsequent accesses observe the new state of the maintained cache lines
+#define __post_maintenance_barrier() do {__dsb(); __isb();} while (0)
+
+// All functions in this file are marked non-flash, even though they themselves may be executed
+// safely from flash, because they are likely to be called during a flash programming operation
+// (which makes flash execution momentarily unsafe)
+
+__always_inline static void check_xip_offset_range(uintptr_t start_offset, uintptr_t size_bytes) {
+    // We use offsets, not addresses, for consistency with the flash API. This means the range of
+    // valid inputs starts at 0.
+    (void)start_offset;
+    (void)size_bytes;
+    valid_params_if(HARDWARE_XIP_CACHE, start_offset <= XIP_CACHE_ADDRESS_SPACE_SIZE);
+    valid_params_if(HARDWARE_XIP_CACHE, start_offset + size_bytes <= XIP_CACHE_ADDRESS_SPACE_SIZE);
+    // Check for unsigned wrapping too:
+    valid_params_if(HARDWARE_XIP_CACHE, start_offset + size_bytes >= start_offset);
+}
+
+#if !PICO_RP2040
+// Generic code for RP2350-style caches: apply a maintenance operation to a range of offsets
+static void __no_inline_not_in_flash_func(xip_cache_maintain)(uintptr_t start_offset, uintptr_t size_bytes, cache_op_t op) {
+    check_xip_offset_range(start_offset, size_bytes);
+    valid_params_if(HARDWARE_XIP_CACHE, (start_offset & (XIP_CACHE_LINE_SIZE - 1u)) == 0);
+    valid_params_if(HARDWARE_XIP_CACHE, (size_bytes & (XIP_CACHE_LINE_SIZE - 1u)) == 0);
+    valid_params_if(HARDWARE_XIP_CACHE, (uint)op <= (uint)XIP_CACHE_OP_MAX);
+
+    uintptr_t end = start_offset + size_bytes;
+    for (uintptr_t offset = start_offset; offset < end; offset += XIP_CACHE_LINE_SIZE) {
+        *(io_wo_8 *) (XIP_MAINTENANCE_BASE + offset + (uintptr_t)op) = 0;
+    }
+    __post_maintenance_barrier();
+}
+#endif
+
+void __no_inline_not_in_flash_func(xip_cache_invalidate_all)(void) {
+#if PICO_RP2040
+    xip_ctrl_hw->flush = 1;
+    // Read back to wait for completion
+    (void)xip_ctrl_hw->flush;
+    __post_maintenance_barrier();
+#else
+    xip_cache_maintain(XIP_CACHE_ADDRESS_SPACE_SIZE - XIP_CACHE_SIZE, XIP_CACHE_SIZE, XIP_CACHE_INVALIDATE_BY_SET_WAY);
+#endif
+}
+
+void __no_inline_not_in_flash_func(xip_cache_invalidate_range)(uintptr_t start_offset, uintptr_t size_bytes) {
+#if PICO_RP2040
+    // Accsses are at intervals of one half cache line (so 4 bytes) because RP2040's cache has two
+    // valid flags per cache line, and we need to clear both.
+    check_xip_offset_range(start_offset, size_bytes);
+    valid_params_if(HARDWARE_XIP_CACHE, (start_offset & 3u) == 0);
+    valid_params_if(HARDWARE_XIP_CACHE, (size_bytes & 3u) == 0);
+
+    uintptr_t end = start_offset + size_bytes;
+    // On RP2040 you can invalidate a sector (half-line) by writing to its normal cached+allocating address
+    for (uintptr_t offset = start_offset; offset < end; offset += 4u) {
+        *(io_wo_32 *)(offset + XIP_BASE) = 0;
+    }
+    __post_maintenance_barrier();
+
+#else
+
+    xip_cache_maintain(start_offset, size_bytes, XIP_CACHE_INVALIDATE_BY_ADDRESS);
+
+#endif
+}
+
+#if !XIP_CACHE_IS_READ_ONLY
+void __no_inline_not_in_flash_func(xip_cache_clean_all)(void) {
+    // Use addresses outside of the downstream QMI address range to work around RP2350-E11; this
+    // effectively performs a clean+invalidate (except being a no-op on pinned lines) due to the
+    // erroneous update of the tag. Consequently you will take a miss on the next access to the
+    // cleaned address.
+    xip_cache_maintain(XIP_END - XIP_BASE - XIP_CACHE_SIZE, XIP_CACHE_SIZE, XIP_CACHE_CLEAN_BY_SET_WAY);
+}
+#endif
+
+#if !XIP_CACHE_IS_READ_ONLY
+void __no_inline_not_in_flash_func(xip_cache_clean_range)(uintptr_t start_offset, uintptr_t size_bytes) {
+    xip_cache_maintain(start_offset, size_bytes, XIP_CACHE_CLEAN_BY_ADDRESS);
+}
+#endif
+
+#if !PICO_RP2040
+void __no_inline_not_in_flash_func(xip_cache_pin_range)(uintptr_t start_offset, uintptr_t size_bytes) {
+    valid_params_if(HARDWARE_XIP_CACHE, size_bytes <= XIP_CACHE_SIZE);
+    xip_cache_maintain(start_offset, size_bytes, XIP_CACHE_PIN_AT_ADDRESS);
+}
+#endif
+

test/kitchen_sink/CMakeLists.txt

@@ -24,6 +24,7 @@ set(KITCHEN_SINK_LIBS
     hardware_uart
     hardware_vreg
     hardware_watchdog
+    hardware_xip_cache
     hardware_xosc
     pico_aon_timer
     pico_bit_ops