Serial

Bruce also accept command inputs via serial port after https://github.com/pr3y/Bruce/pull/84.

List of supported here are some commands:

ir, subghz, music_player, say, led, power, clock, tone, gpio, i2c, storage, settings, factory_reset

Most of these commands are compatible with the Flipper Zero CLI.

Sending serial commands

• via the Arduino IDE Serial Monitor, Putty, or any other serial terminal app
• via a bash script: echo "say My name is Bruce" | busybox microcom -s 115200 /dev/ttyACM0 -t 1000
• via a python script
• from a smartphone using SerialManager
• via the WebUI "SerialCmd" button
• after starting the WebUI, with curl -XPOST "http://bruce.local/cm" -d "cmnd=say My name is Bruce"

Examples

text-to-speech (req. a speaker):

say My name is Bruce

play doom music (req. a speaker):

music_player doom:d=4,o=5,b=112:16e4,16e4,16e,16e4,16e4,16d,16e4,16e4,16c,16e4,16e4,16a#4,16e4,16e4,16b4,16c,16e4,16e4,16e,16e4,16e4,16d,16e4,16e4,16c,16e4,16e4,a#4,16p,16e4,16e4,16e,16e4,16e4,16d,16e4,16e4,16c,16e4,16e4,16a#4,16e4,16e4,16b4,16c,16e4,16e4,16e,16e4,16e4,16d,16e4,16e4,16c,16e4,16e4,a#4,16p,16a4,16a4,16a,16a4,16a4,16g,16a4,16a4,16f,16a4,16a4,16d#,16a4,16a4,16e,16f,16a4,16a4,16a,16a4,16a4,16g,16a4,16a4,16f,16a4,16a4,d#

sleep

power sleep

turn off my LG TV via a decoded NEC code:

ir tx NEC 04000000 08000000

turn off my LG AC via a RAW IR file (already stored on the FS):

ir tx_from_file AC_LG_SX122CL_off.ir

turn on an smart power socket from a decoded Sub file (already stored on the FS):

subghz tx_from_file plug1_on.sub

send a custom rf command (format {3-byte hex_key} {frequency} {te} {count}):

subghz tx 445533 433920000 174 10  # flipper format

execute a badusb script (already stored on the FS):

badusb tx_from_file HelloWorld.txt

set a pin in (digital) output mode (only on unused GPIO pins, using Arduino pinMode()):

gpio mode 2 0 

sets the a pin's value (only on unused GPIO pins, using Arduino digitalWrite()):

gpio set 2 0 

read a pin's value (only on unused GPIO pins, using Arduino digitalRead()):

gpio read 2

read a file content, and output on the console:

storage read BruceRF/bruce_0.sub

list files on the root (SD card if present, LittleFS otherwise):

storage list /

delete a file:

storage remove BruceRF/bruce_0.sub

scan connected I2C devieces:

i2c

View currently-active settings:

settings

Change the radio module setting:

settings RfModule 1

Reset settings to the default:

factory_reset