Merge pull request #312 from opengeospatial/update_iso_definitions_fr…

…om_geolexica

updated tc211 definitions from geolexica

incubation/geolexica-tc211/data/tc211/0.csv → incubation/geolexica-tc211/data/adoc/0.csv

@@ -1,4 +1,3 @@
-file,term
 815_a_posteriori_classification.json,a posteriori classification
 816_a_priori_classification.json,a priori classification
 2_abbreviation.json,abbreviation
@@ -209,7 +208,7 @@ file,term
 69_conceptual_schema.json,conceptual schema
 70_conceptual_schema_language.json,conceptual schema language
 1263_conditional_feature_portrayal_function.json,conditional feature portrayal function
-2151_conformal_adj.json,conformal adj.
+2151_conformal__adj..json,conformal, adj.
 2614_conformance.json,conformance
 71_conformance.json,conformance
 72_conformance_assessment_process.json,conformance assessment process
@@ -836,7 +835,7 @@ file,term
 2901_main_lobe.json,main lobe
 280_main-road_rule.json,main-road rule
 2220_management.json,management
-281_maneuver_manœuvre.json,maneuver_manœuvre
+281_maneuver_manœuvre.json,maneuver,manœuvre
 282_map.json,map
 618_map_projection.json,map projection
 918_matrix.json,matrix
@@ -1264,8 +1263,8 @@ file,term
 685_spacestamp.json,spacestamp
 418_spatial_attribute.json,spatial attribute
 2864_spatial_collection.json,spatial collection
-2251_spatial_dimension_adj.json,spatial dimension adj
-2252_spatial_dimension_noun.json,spatial dimension noun
+2251_spatial_dimension__adj.json,spatial dimension, adj
+2252_spatial_dimension__noun.json,spatial dimension, noun
 2863_spatial_feature_collection.json,spatial feature collection
 419_spatial_object.json,spatial object
 420_spatial_operator.json,spatial operator

incubation/geolexica-tc211/data/adoc/1000_ground_sampling_distance.adoc

@@ -0,0 +1,10 @@
+=== ground sampling distance
+
+linear distance between pixel centres on the ground
+
+NOTE: This definition also applies for water surfaces.
+
+(Source: ISO 19130-1:2018)
+
+(Source: ISO/TS 19130:2010)
+

incubation/geolexica-tc211/data/tc211/1002_image_distortion.adoc → incubation/geolexica-tc211/data/adoc/1002_image_distortion.adoc

@@ -2,5 +2,7 @@
 
 deviation between the actual location of an image point and the location that theoretically would result from the geometry of the imaging process without any errors
 
-(Source: ISO)
+(Source: ISO 19130-1:2018)
+
+(Source: ISO/TS 19130:2010)
 

incubation/geolexica-tc211/data/tc211/1003_impulse_response.adoc → incubation/geolexica-tc211/data/adoc/1003_impulse_response.adoc

@@ -2,5 +2,7 @@
 
 width of the return generated by a small point reflector, which equates to the smallest distance between two point reflectors that can be distinguished as two objects
 
-(Source: ISO)
+(Source: ISO 19130-1:2018)
+
+(Source: ISO/TS 19130:2010)
 

incubation/geolexica-tc211/data/adoc/1004_internal_coordinate_reference_system.adoc

@@ -0,0 +1,8 @@
+=== internal coordinate reference system
+
+coordinate reference system having a datum specified with reference to the object itself
+
+(Source: ISO 19130-1:2018)
+
+(Source: ISO/TS 19130:2010)
+

incubation/geolexica-tc211/data/adoc/1005_passive_sensor.adoc

@@ -0,0 +1,8 @@
+=== passive sensor
+
+sensor that detects and collects energy from an independent source
+
+(Source: ISO 19130-1:2018)
+
+(Source: ISO/TS 19130:2010)
+

incubation/geolexica-tc211/data/tc211/1006_platform_coordinate_reference_system.adoc → incubation/geolexica-tc211/data/adoc/1006_platform_coordinate_reference_system.adoc

@@ -2,5 +2,7 @@
 
 engineering coordinate reference system fixed to the collection platform within which positions on the collection platform are defined
 
-(Source: ISO)
+(Source: ISO 19130-1:2018)
+
+(Source: ISO/TS 19130:2010)
 

incubation/geolexica-tc211/data/adoc/1007_principal_point_of_autocollimation.adoc

@@ -0,0 +1,8 @@
+=== principal point of autocollimation
+
+point of intersection between the image plane and the normal from the perspective centre
+
+(Source: ISO 19130-1:2018)
+
+(Source: ISO/TS 19130:2010)
+

incubation/geolexica-tc211/data/adoc/1008_projection_centre.adoc

@@ -0,0 +1,8 @@
+=== projection centre
+
+point located in three dimensions through which all rays between object points and image points appear to pass geometrically
+
+(Source: ISO 19130-1:2018)
+
+(Source: ISO/TS 19130:2010)
+

incubation/geolexica-tc211/data/adoc/1009_range_direction.adoc

@@ -0,0 +1,8 @@
+=== range direction <SAR>
+
+direction of the range vector
+
+(Source: ISO 19130-1:2018)
+
+(Source: ISO/TS 19130:2010)
+

incubation/geolexica-tc211/data/tc211/100_coverage_geometry.adoc → incubation/geolexica-tc211/data/adoc/100_coverage_geometry.adoc

@@ -2,5 +2,5 @@
 
 configuration of the domain of a coverage described in terms of coordinates
 
-(Source: ISO)
+(Source: ISO 19123:2005)
 

incubation/geolexica-tc211/data/adoc/1010_range_resolution.adoc

@@ -0,0 +1,10 @@
+=== range resolution
+
+spatial resolution in the range direction
+
+NOTE: For a SAR sensor, it is usually measured in terms of the impulse response of the sensor and processing system. It is a function of the bandwidth of the pulse.
+
+(Source: ISO 19130-1:2018)
+
+(Source: ISO/TS 19130:2010)
+

incubation/geolexica-tc211/data/adoc/1011_range_vector.adoc

@@ -0,0 +1,8 @@
+=== range vector
+
+vector from the antenna to a point in the scene
+
+(Source: ISO 19130-1:2018)
+
+(Source: ISO/TS 19130:2010)
+

incubation/geolexica-tc211/data/tc211/1012_ScanSAR_mode.adoc → incubation/geolexica-tc211/data/adoc/1012_ScanSAR_mode.adoc

@@ -2,5 +2,7 @@
 
 special case of stripmap mode that uses an electronically steerable antenna to quickly change the swath being imaged during collection to collect multiple parallel swaths in one pass
 
-(Source: ISO)
+(Source: ISO 19130-1:2018)
+
+(Source: ISO/TS 19130:2010)
 

incubation/geolexica-tc211/data/tc211/1013_sensor_model.adoc → incubation/geolexica-tc211/data/adoc/1013_sensor_model.adoc

@@ -2,5 +2,5 @@
 
 mathematical description of the relationship between the three-dimensional object space and the two-dimensional plane of the associated image produced by a sensor
 
-(Source: ISO)
+(Source: ISO/TS 19130:2010)
 

incubation/geolexica-tc211/data/adoc/1014_accuracy.adoc

@@ -0,0 +1,8 @@
+=== accuracy
+
+closeness of agreement between a test result or measurement result and the true value
+
+(Source: ISO 3534-2:2006)
+
+(Source: ISO 6709:2008)
+

incubation/geolexica-tc211/data/adoc/1018_feature_identifier.adoc

@@ -0,0 +1,8 @@
+=== feature identifier
+
+identifier that uniquely designates a feature instance
+
+(Source: ISO 19142:2010)
+
+(Source: ISO 19143:2010)
+

incubation/geolexica-tc211/data/tc211/1019_filter_capabilities_XML.adoc → incubation/geolexica-tc211/data/adoc/1019_filter_capabilities_XML.adoc

@@ -2,5 +2,5 @@
 
 metadata, encoded in XML, that describes which predicates defined in this International Standard a system implements
 
-(Source: ISO)
+(Source: ISO 19143:2010)
 

incubation/geolexica-tc211/data/adoc/101_curve.adoc

@@ -0,0 +1,10 @@
+=== curve
+
+1-dimensional geometric primitive, representing the continuous image of a line
+
+NOTE: The boundary of a curve is the set of points at either end of the curve. If the curve is a cycle, the two ends are identical, and the curve (if topologically closed) is considered to not have a boundary. The first point is called the start point, and the last is the end point. Connectivity of the curve is guaranteed by the "continuous image of a line" clause. A topological theorem states that a continuous image of a connected set is connected.
+
+(Source: ISO 19136-1:2020)
+
+(Source: ISO 19107:2003)
+

incubation/geolexica-tc211/data/adoc/1020_filter_expression.adoc

@@ -0,0 +1,6 @@
+=== filter expression
+
+predicate expression encoded using XML
+
+(Source: ISO 19143:2010)
+

incubation/geolexica-tc211/data/tc211/1021_filter_expression_processor.adoc → incubation/geolexica-tc211/data/adoc/1021_filter_expression_processor.adoc

@@ -2,5 +2,5 @@
 
 component of a system that processes a filter expression
 
-(Source: ISO)
+(Source: ISO 19143:2010)
 

incubation/geolexica-tc211/data/adoc/1022_identification_convention.adoc

@@ -0,0 +1,6 @@
+=== identification convention
+
+set of rules for creating identifiers
+
+(Source: ISO 19118:2011)
+

incubation/geolexica-tc211/data/adoc/1028_land_use.adoc

@@ -0,0 +1,10 @@
+=== land use
+
+arrangements, activities and inputs people undertake in a certain land cover type to maintain it or produce change
+
+NOTE: The definition of land use in this way establishes a direct link between land cover and the actions of people in their environment. Multiple land uses can coexist at the same location (e.g. forestry and recreation), contrary to land cover classes that are mutually exclusive.
+
+(Source: UNFAO LCCS 2:2005)
+
+(Source: ISO 19144-2:2012, 4.1.9)
+

incubation/geolexica-tc211/data/adoc/1029_literal_value.adoc

@@ -0,0 +1,8 @@
+=== literal value
+
+constant, explicitly specified value
+
+NOTE: This contrasts with a value that is determined by resolving a chain of substitution (e.g. a variable)
+
+(Source: ISO 19143:2010)
+

incubation/geolexica-tc211/data/adoc/102_curve_segment.adoc

@@ -0,0 +1,8 @@
+=== curve segment
+
+1-dimensional geometric object used to represent a continuous component of a curve using homogeneous interpolation and definition methods
+
+NOTE: The geometric set represented by a single curve segment is equivalent to a curve.
+
+(Source: ISO 19107:2003)
+

incubation/geolexica-tc211/data/tc211/1036_relocate.adoc → incubation/geolexica-tc211/data/adoc/1036_relocate.adoc

@@ -2,5 +2,5 @@
 
 update a reference to a resource that has been moved or copied to a new location
 
-(Source: ISO)
+(Source: ISO 19142:2010)
 

incubation/geolexica-tc211/data/adoc/103_cycle.adoc

@@ -0,0 +1,8 @@
+=== cycle<geometry>
+
+spatial object without a boundary
+
+NOTE: Cycles are used to describe boundary components (see shell, ring). A cycle has no boundary because it closes on itself, but it is bounded (i.e., it does not have infinite extent).  A circle or a sphere, for example, has no boundary, but is bounded.
+
+(Source: ISO 19107:2003)
+

incubation/geolexica-tc211/data/adoc/1042_response_model.adoc

@@ -0,0 +1,8 @@
+=== response model
+
+schema defining the properties of each feature type that can appear in the response to a query operation
+
+NOTE: This is the schema of feature types that a client can obtain using the DescribeFeatureType operation (see Clause 9).
+
+(Source: ISO 19142:2010)
+

incubation/geolexica-tc211/data/adoc/104_data.adoc

@@ -0,0 +1,8 @@
+=== data
+
+reinterpretable representation of information in a formalised manner suitable for communication, interpretation, or processing
+
+(Source: ISO/IEC 2382-1:1993)
+
+(Source: ISO 19118:2011 ,4.8)
+

incubation/geolexica-tc211/data/adoc/105_data_element.adoc

@@ -0,0 +1,8 @@
+=== data element
+
+unit of data that, in a certain context, is considered indivisible
+
+(Source: ISO 19118:2005)
+
+(Source: )
+

incubation/geolexica-tc211/data/adoc/1063_domain_feature.adoc

@@ -0,0 +1,10 @@
+=== domain feature
+
+feature of a type defined within a particular application domain
+
+NOTE: This may be contrasted with observations and sampling features, which are features of types defined for cross-domain purposes.
+
+(Source: ISO 19156:2023)
+
+(Source: ISO 19156:2011)
+

incubation/geolexica-tc211/data/adoc/1069_grid_coordinate_system.adoc

@@ -0,0 +1,8 @@
+=== grid coordinate system
+
+coordinate system in which a position is specified relative to the intersection of curves
+
+(Source: ISO 19115-2:2019)
+
+(Source: ISO 19115-2:2009)
+

incubation/geolexica-tc211/data/adoc/1073_linear_element.adoc

@@ -0,0 +1,8 @@
+=== linear element
+
+1-dimensional object that serves as the axis along which linear referencing is performed
+
+NOTE: Also known as curvilinear element.
+
+(Source: ISO 19148:2012)
+

incubation/geolexica-tc211/data/adoc/1079_Linear_Referencing_System.adoc

@@ -0,0 +1,8 @@
+=== Linear Referencing System
+
+set of Linear Referencing Methods and the policies, records and procedures for implementing them
+
+(Source: ISO 19148:2021)
+
+(Source: ISO 19148:2012)
+

incubation/geolexica-tc211/data/adoc/107_data_interchange.adoc

@@ -0,0 +1,8 @@
+=== data interchange
+
+delivery, receipt and interpretation of data
+
+(Source: ISO 19118:2011)
+
+(Source: ISO 19118:2005)
+

incubation/geolexica-tc211/data/adoc/1081_linearly_located.adoc

@@ -0,0 +1,8 @@
+=== linearly located
+
+located using a Linear Referencing System
+
+(Source: ISO 19148:2021)
+
+(Source: ISO 19148:2012)
+

incubation/geolexica-tc211/data/adoc/108_data_level.adoc

@@ -0,0 +1,8 @@
+=== data level
+
+level containing data describing specific instances
+
+(Source: ISO 19101:2002)
+
+(Source: )
+

incubation/geolexica-tc211/data/adoc/1097_product.adoc

@@ -0,0 +1,8 @@
+=== product
+
+result of a process
+
+(Source: ISO 9000:2005)
+
+(Source: ISO/TS 19158:2012, 4.3)
+

incubation/geolexica-tc211/data/adoc/10_admitted_term.adoc

@@ -0,0 +1,8 @@
+=== admitted term
+
+term rated according to the scale of the term acceptability rating as a synonym for a preferred term
+
+(Source: ISO 1087-1:2000)
+
+(Source: ISO/TS 19104:2008)
+

incubation/geolexica-tc211/data/adoc/1102_quality.adoc

@@ -0,0 +1,10 @@
+=== quality
+
+degree to which a set of inherent characteristics fulfils requirements
+
+NOTE: For the purposes of this Technical Specification the quality characteristics of product include: Data quality (the elements of which are described by ISO 19157), Volume of delivery, Schedule of delivery, and Cost of production and/or update.
+
+(Source: ISO 9000:2005)
+
+(Source: ISO/TS 19158)
+

incubation/geolexica-tc211/data/adoc/1108_sensor.adoc

@@ -0,0 +1,8 @@
+=== sensor
+
+element of a measuring system that is directly affected by a phenomenon, body, or substance carrying a quantity to be measured
+
+(Source: ISO/IEC Guide 99:2007)
+
+(Source: ISO 19115-2:2009)
+

incubation/geolexica-tc211/data/tc211/110_data_product.adoc → incubation/geolexica-tc211/data/adoc/110_data_product.adoc

@@ -2,5 +2,5 @@
 
 dataset or dataset series that conforms to a data product specification
 
-(Source: ISO)
+(Source: ISO 19131:2007)