meta-incostartec

This layer supports the pLILLY-A20 from INCOstartec.

It depends on the additional layer:

meta-sunxi: https://github.com/linux-sunxi/meta-sunxi

Usage

Clone this repository, the Yocto Poky reference distribution and the meta-sunxi layer in a directory:

mkdir ~/yocto-build

cd ~/yocto-build
git clone https://github.com/opendevices/meta-incostartec
cd meta-incostartec
git checkout thud

cd ~/yocto-build
git clone https://github.com/linux-sunxi/meta-sunxi
cd meta-sunxi
git checkout thud

cd ~/yocto-build
git clone https://git.yoctoproject.org/git/poky
cd poky
git checkout thud

Setup the build directory:

cd ~/yocto-build
source poky/oe-init-build-env build-pLILLY-A20/

Add the layers meta-incostartec and meta-sunxi to ~/yocto-build/build-pLILLY-A20/conf/bblayers.conf

POKY_BBLAYERS_CONF_VERSION = "2"

BBPATH = "${TOPDIR}"
BBFILES ?= ""

BBLAYERS ?= " \
  ${TOPDIR}/../poky/meta \
  ${TOPDIR}/../poky/meta-poky \
  ${TOPDIR}/../meta-sunxi \
  ${TOPDIR}/../meta-incostartec \
"

Search the MACHINE variable in ~/yocto-build/build-pLILLY-A20/conf/local.conf and set it to plilly-a20

...
MACHINE = "plilly-a20"
..

Run the first image build:

bitbake core-image-minimal
# or
bitbake core-image-base

When the build is completed the output can be found in ~/yocto-build/build-pLILLY-A20/tmp/deploy/images/plilly-a20/.

Write the image to a SDcard and boot the pLILLY

sudo bmaptool copy --nobmap core-image-minimal-plilly-a20.sunxi-sdimg /dev/mmcblk0

# or using dd
sudo dd if=core-image-base-plilly-a20.sunxi-sdimg of=/dev/mmcblk0 bs=1M