Merge pull request #832 from tatigger/patch-1

Add link to microUSB to microUSB OTG cable
openaps · May 21, 2017 · 1b8f9bf · 1b8f9bf
2 parents 08e5211 + c59042c
commit 1b8f9bf
Showing 1 changed file with 4 additions and 0 deletions.
diff --git a/docs/docs/walkthrough/phase-0/hardware/edison.md b/docs/docs/walkthrough/phase-0/hardware/edison.md
@@ -55,6 +55,10 @@ You will need two micro USB cables - with a micro connector on one end and a sta
 
 Warning: bad cables cause a lot of headaches during the Edison flashing process, so it may be worth verifying before you start if you have good cables that can transfer data.
 
+## Micro USB to Micro USB OTG Cable
+
+You may need to connect your Dexcom Receiver to your Explorer Board for offline looping.  For this you will need to use a micro USB to micro USB OTG cable (or an OTG adapter). Here is an example of a cable that will work: [BestGameSetups Micro USB to Micro USB OTG (On-The-Go) 12" (30cm) Data Cable](https://www.amazon.com/dp/B00TQOEST0/ref=cm_sw_r_cp_api_Niqfzb3B4RJJW)
+
 ## Nuts and Bolts
 
 You will likely want to screw your Edison onto the Explorer Board to stabilize the rig. You can order a kit, or use (2) M2 screws and (6) M2 nuts (four used as spacers). Here's an example of a harware pack with screws and nuts that will work: [Sparkfun Intel Edison Hardware Pack](https://www.sparkfun.com/products/13187)