[Backport v2.9-nRF54H20-branch] tests: benchmarks: multicore: Add idle_counter

tests/benchmarks/multicore/idle_counter/CMakeLists.txt

@@ -0,0 +1,19 @@
+#
+# Copyright (c) 2025 Nordic Semiconductor ASA
+#
+# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+#
+
+cmake_minimum_required(VERSION 3.20.0)
+
+find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})
+
+if(NOT SYSBUILD)
+	message(FATAL_ERROR
+		" This is a multi-image application that should be built using sysbuild.\n"
+		" Add --sysbuild argument to west build command to prepare all the images.")
+endif()
+
+project(idle_counter)
+
+target_sources(app PRIVATE src/main.c)

tests/benchmarks/multicore/idle_counter/Kconfig

@@ -0,0 +1,15 @@
+#
+# Copyright (c) 2025 Nordic Semiconductor ASA
+#
+# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+#
+
+config TEST_SLEEP_DURATION_MS
+	int "Core sleep duration (miliseconds)"
+	default 1000
+	help
+	  Set sleep duration to TEST_SLEEP_DURATION_MS miliseconds.
+	  Based on the value of 'min-residency-us' specified for each power state defined in the DTS,
+	  core enters the lowest possible power state.
+
+source "Kconfig.zephyr"

tests/benchmarks/multicore/idle_counter/boards/nrf54h20dk_nrf54h20_cpuapp.overlay

@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2025 Nordic Semiconductor ASA
+ *
+ * SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+ */
+
+/ {
+	aliases {
+		led = &led0;
+		/delete-property/ led1;
+		counter = &timer120;
+	};
+};
+
+&timer120 {
+	status = "okay";
+};
+
+/delete-node/ &led1;

tests/benchmarks/multicore/idle_counter/prj.conf

@@ -0,0 +1,16 @@
+# Drivers and peripherals
+CONFIG_COUNTER=y
+
+# Enable runtime power management for peripheral
+CONFIG_PM_DEVICE=y
+CONFIG_PM_DEVICE_RUNTIME=y
+
+CONFIG_PM=y
+CONFIG_PM_S2RAM=y
+CONFIG_PM_S2RAM_CUSTOM_MARKING=y
+CONFIG_POWEROFF=y
+CONFIG_SERIAL=n
+CONFIG_BOOT_BANNER=n
+CONFIG_LOG=n
+
+CONFIG_ASSERT=y

tests/benchmarks/multicore/idle_counter/remote/CMakeLists.txt

@@ -0,0 +1,12 @@
+#
+# Copyright (c) 2025 Nordic Semiconductor ASA
+#
+# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+#
+
+cmake_minimum_required(VERSION 3.20.0)
+
+find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})
+project(remote)
+
+target_sources(app PRIVATE ../src/main.c)

tests/benchmarks/multicore/idle_counter/remote/Kconfig

@@ -0,0 +1,15 @@
+#
+# Copyright (c) 2025 Nordic Semiconductor ASA
+#
+# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+#
+
+config TEST_SLEEP_DURATION_MS
+	int "Core sleep duration (miliseconds)"
+	default 1000
+	help
+	  Set sleep duration to TEST_SLEEP_DURATION_MS miliseconds.
+	  Based on the value of 'min-residency-us' specified for each power state defined in the DTS,
+	  core enters the lowest possible power state.
+
+source "Kconfig.zephyr"

tests/benchmarks/multicore/idle_counter/remote/boards/nrf54h20dk_nrf54h20_cpurad.overlay

@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2025 Nordic Semiconductor ASA
+ *
+ * SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+ */
+
+#include <zephyr/dt-bindings/gpio/nordic-nrf-gpio.h>
+
+/ {
+	aliases {
+		led = &led1;
+		counter = &timer130;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1: led_1 {
+			gpios = <&gpio9 1 GPIO_ACTIVE_HIGH>;
+			label = "Green LED 1";
+		};
+	};
+};
+
+&gpio9 {
+	status = "okay";
+};
+
+&gpiote130 {
+	status = "okay";
+};
+
+&timer130 {
+	status = "okay";
+};

tests/benchmarks/multicore/idle_counter/remote/prj.conf

@@ -0,0 +1,18 @@
+# Drivers and peripherals
+CONFIG_COUNTER=y
+CONFIG_GPIO=y
+
+# Enable runtime power management for peripheral
+CONFIG_PM_DEVICE=y
+CONFIG_PM_DEVICE_RUNTIME=y
+
+CONFIG_PM=y
+CONFIG_PM_S2RAM=y
+CONFIG_PM_S2RAM_CUSTOM_MARKING=y
+CONFIG_POWEROFF=y
+CONFIG_CONSOLE=n
+CONFIG_UART_CONSOLE=n
+CONFIG_SERIAL=n
+CONFIG_BOOT_BANNER=n
+
+CONFIG_ASSERT=y

tests/benchmarks/multicore/idle_counter/src/main.c

@@ -0,0 +1,134 @@
+/*
+ * Copyright (c) 2025 Nordic Semiconductor ASA
+ *
+ * SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+ */
+
+#include <zephyr/kernel.h>
+#include <zephyr/drivers/gpio.h>
+#include <zephyr/drivers/counter.h>
+#include <zephyr/logging/log.h>
+#include <zephyr/devicetree/clocks.h>
+#include <zephyr/drivers/clock_control/nrf_clock_control.h>
+
+LOG_MODULE_REGISTER(idle_counter);
+
+static const struct gpio_dt_spec led = GPIO_DT_SPEC_GET(DT_ALIAS(led), gpios);
+
+#define ALARM_CHANNEL_ID (0)
+const struct device *const counter_dev = DEVICE_DT_GET(DT_ALIAS(counter));
+
+static K_SEM_DEFINE(my_sem, 0, 1);
+
+#if defined(CONFIG_CLOCK_CONTROL) && defined(CONFIG_SOC_NRF54H20_CPUAPP)
+const uint32_t freq[] = {320, 256, 128, 64};
+
+/*
+ * Set Global Domain frequency (HSFLL120)
+ */
+void set_global_domain_frequency(uint32_t freq)
+{
+	int err;
+	int res;
+	struct onoff_client cli;
+	const struct device *hsfll_dev = DEVICE_DT_GET(DT_NODELABEL(hsfll120));
+	const struct nrf_clock_spec clk_spec_global_hsfll = {.frequency = MHZ(freq)};
+
+	LOG_INF("Requested frequency [Hz]: %d", clk_spec_global_hsfll.frequency);
+	sys_notify_init_spinwait(&cli.notify);
+	err = nrf_clock_control_request(hsfll_dev, &clk_spec_global_hsfll, &cli);
+	__ASSERT((err >= 0 && err < 3), "Wrong nrf_clock_control_request return code");
+	do {
+		err = sys_notify_fetch_result(&cli.notify, &res);
+		k_yield();
+	} while (err == -EAGAIN);
+	__ASSERT(err == 0, "Wrong clock control request return code");
+	__ASSERT(res == 0, "Wrong clock control request response");
+}
+#endif /* CONFIG_CLOCK_CONTROL && CONFIG_SOC_NRF54H20_CPUAPP */
+
+void counter_handler(const struct device *counter_dev, uint8_t chan_id, uint32_t ticks,
+		     void *user_data)
+{
+	gpio_pin_set_dt(&led, 1);
+	k_sem_give(&my_sem);
+	counter_stop(counter_dev);
+}
+
+uint32_t start_timer(const struct device *counter_dev)
+{
+	uint32_t start_time;
+	struct counter_alarm_cfg counter_cfg;
+
+	counter_cfg.flags = 0;
+	counter_cfg.ticks = counter_us_to_ticks(counter_dev, CONFIG_TEST_SLEEP_DURATION_MS * 1000);
+	counter_cfg.callback = counter_handler;
+	counter_cfg.user_data = &counter_cfg;
+	counter_set_channel_alarm(counter_dev, ALARM_CHANNEL_ID, &counter_cfg);
+
+	counter_start(counter_dev);
+	start_time = k_cycle_get_32();
+
+	LOG_INF("Counter starts at %u cycle", start_time);
+
+	return start_time;
+}
+
+void verify_timer(uint32_t start_time)
+{
+	uint32_t elapsed;
+	int ret;
+
+	ret = gpio_pin_set_dt(&led, 0);
+	__ASSERT(ret == 0, "Unable to turn off LED");
+	ret = k_sem_take(&my_sem, K_MSEC(CONFIG_TEST_SLEEP_DURATION_MS + 100));
+	elapsed = k_cycle_get_32() - start_time;
+	__ASSERT(ret == 0, "Timer callback not called");
+	ret = gpio_pin_set_dt(&led, 1);
+	__ASSERT(ret == 0, "Unable to turn on LED");
+	LOG_INF("Elapsed %u cycles (%uus)", elapsed, k_cyc_to_us_ceil32(elapsed));
+	__ASSERT(elapsed > k_ms_to_cyc_ceil32(CONFIG_TEST_SLEEP_DURATION_MS - 10) &&
+			 elapsed < k_ms_to_cyc_ceil32(CONFIG_TEST_SLEEP_DURATION_MS + 10),
+		 "expected time to elapse is 1s");
+}
+
+int main(void)
+{
+	uint32_t start_time;
+	int ret;
+
+	ret = gpio_is_ready_dt(&led);
+	__ASSERT(ret, "Error: GPIO Device not ready");
+
+	ret = gpio_pin_configure_dt(&led, GPIO_OUTPUT_ACTIVE);
+	__ASSERT(ret == 0, "Could not configure led GPIO");
+
+	/* Wait a bit to solve NRFS request timeout issue. */
+	k_msleep(500);
+
+	while (1) {
+		ret = gpio_pin_set_dt(&led, 0);
+		__ASSERT(ret == 0, "Unable to turn off LED");
+		k_msleep(CONFIG_TEST_SLEEP_DURATION_MS);
+		ret = gpio_pin_set_dt(&led, 1);
+		__ASSERT(ret == 0, "Unable to turn on LED");
+		k_busy_wait(100000);
+
+#if defined(CONFIG_CLOCK_CONTROL) && defined(CONFIG_SOC_NRF54H20_CPUAPP)
+		for (int i = 0; i <= ARRAY_SIZE(freq); i++) {
+			start_time = start_timer(counter_dev);
+			if (i) {
+				set_global_domain_frequency(freq[i - 1]);
+			}
+			verify_timer(start_time);
+			k_busy_wait(100000);
+		}
+#else
+		start_time = start_timer(counter_dev);
+		verify_timer(start_time);
+		k_busy_wait(100000);
+#endif /* CONFIG_CLOCK_CONTROL && CONFIG_SOC_NRF54H20_CPUAPP */
+	}
+
+	return 0;
+}

tests/benchmarks/multicore/idle_counter/sysbuild.cmake

@@ -0,0 +1,13 @@
+#
+# Copyright (c) 2025 Nordic Semiconductor ASA
+#
+# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+#
+
+# Add remote project
+ExternalZephyrProject_Add(
+    APPLICATION remote
+    SOURCE_DIR ${ZEPHYR_NRF_MODULE_DIR}/tests/benchmarks/power_consumption/common/remote_sleep_forever
+    BOARD ${SB_CONFIG_BOARD}/${SB_CONFIG_SOC}/cpurad
+    BOARD_REVISION ${BOARD_REVISION}
+)

tests/benchmarks/multicore/idle_counter/testcase.yaml

@@ -0,0 +1,18 @@
+common:
+  tags:
+    - ppk_power_measure
+    - ci_tests_benchmarks_current_consumption
+tests:
+  benchmarks.power_consumption.counter:
+    sysbuild: true
+    integration_platforms:
+      - nrf54h20dk/nrf54h20/cpuapp
+    platform_allow:
+      - nrf54h20dk/nrf54h20/cpuapp
+    extra_args:
+      - CONFIG_CLOCK_CONTROL=y
+    harness: pytest
+    harness_config:
+      fixture: ppk_power_measure
+      pytest_root:
+        - "${CUSTOM_ROOT_TEST_DIR}/test_measure_power_consumption.py::test_measure_and_data_dump_fast_timer_and_s2ram_with_clock_control"