added docker variables.sh.

scripts/docker-testnet/prepare.sh

@@ -6,13 +6,10 @@ export DOCKERTESTNETDIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" >/dev/null 2>&
 
 MULTIVERSXTESTNETSCRIPTSDIR="$(dirname "$DOCKERTESTNETDIR")/testnet"
 
-source "$MULTIVERSXTESTNETSCRIPTSDIR/variables.sh"
+source "$DOCKERTESTNETDIR/variables.sh"
 source "$MULTIVERSXTESTNETSCRIPTSDIR/include/config.sh"
 source "$MULTIVERSXTESTNETSCRIPTSDIR/include/build.sh"
 
-export CONFIGGENERATORDIR="${MULTIVERSXDIR}/mx-chain-go/mx-chain-deploy-go/cmd/filegen"
-export CONFIGGENERATOR="$CONFIGGENERATORDIR/filegen"
-
 prepareFolders
 
 buildConfigGenerator

scripts/docker-testnet/variables.sh

@@ -0,0 +1,188 @@
+# These paths must be absolute
+
+# METASHARD_ID will be used to identify a shard ID as metachain
+export METASHARD_ID=4294967295
+
+# Path to mx-chain-go. Determined automatically. Do not change.
+export MULTIVERSXDIR=$(dirname $(dirname $MULTIVERSXTESTNETSCRIPTSDIR))
+
+# Enable the MultiversX Proxy. Note that this is a private repository
+# (mx-chain-proxy-go).
+export USE_PROXY=1
+
+# Enable the MultiversX Transaction Generator. Note that this is a private
+# repository (mx-chain-txgen-go).
+export USE_TXGEN=0
+
+# Path where the testnet will be instantiated. This folder is assumed to not
+# exist, but it doesn't matter if it already does. It will be created if not,
+# anyway.
+export TESTNETDIR="$HOME/MultiversX/testnet"
+
+# Path to mx-chain-deploy-go, branch: master. Default: near mx-chain-go.
+export CONFIGGENERATORDIR="$MULTIVERSXDIR/mx-chain-deploy-go/cmd/filegen"
+export CONFIGGENERATOR="$CONFIGGENERATORDIR/filegen"    # Leave unchanged.
+export CONFIGGENERATOROUTPUTDIR="output"
+
+# Path to the executable node. Leave unchanged unless well justified.
+export NODEDIR="$MULTIVERSXDIR/cmd/node"
+export NODE="$NODEDIR/node"     # Leave unchanged
+
+# Path to the executable seednode. Leave unchanged unless well justified.
+export SEEDNODEDIR="$MULTIVERSXDIR/cmd/seednode"
+export SEEDNODE="$SEEDNODEDIR/seednode"   # Leave unchanged.
+
+# Niceness value of the Seednode, Observer Nodes and Validator Nodes. Leave
+# blank to not adjust niceness.
+export NODE_NICENESS=10
+
+# Start a watcher daemon for each validator node, which restarts the node if it
+# is suffled out of its shard.
+export NODE_WATCHER=0
+
+# Delays after running executables.
+export SEEDNODE_DELAY=5
+export GENESIS_DELAY=30
+export HARDFORK_DELAY=900 #15 minutes enough to take export and gracefully close
+export NODE_DELAY=60
+
+export GENESIS_STAKE_TYPE="direct" #'delegated' or 'direct' as in direct stake
+
+#if set to 1, each observer will turn off the antiflooding capability, allowing spam in our network
+export OBSERVERS_ANTIFLOOD_DISABLE=0
+
+# Shard structure
+export SHARDCOUNT=2
+export SHARD_VALIDATORCOUNT=3
+export SHARD_OBSERVERCOUNT=1
+export SHARD_CONSENSUS_SIZE=3
+
+# Metashard structure
+export META_VALIDATORCOUNT=3
+export META_OBSERVERCOUNT=1
+export META_CONSENSUS_SIZE=$META_VALIDATORCOUNT
+
+# MULTI_KEY_NODES if set to 1, one observer will be generated on each shard that will handle all generated keys
+export MULTI_KEY_NODES=0
+
+# EXTRA_KEYS if set to 1, extra keys will be added to the generated keys
+export EXTRA_KEYS=1
+
+# ALWAYS_NEW_CHAINID will generate a fresh new chain ID each time start.sh/config.sh is called
+export ALWAYS_NEW_CHAINID=1
+
+# ROUNDS_PER_EPOCH represents the number of rounds per epoch. If set to 0, it won't override the node's config
+export ROUNDS_PER_EPOCH=0
+
+# HYSTERESIS defines the hysteresis value for number of nodes in shard
+export HYSTERESIS=0.0
+
+# ALWAYS_NEW_APP_VERSION will set a new version each time the node will be compiled
+export ALWAYS_NEW_APP_VERSION=0
+
+# ALWAYS_UPDATE_CONFIGS will re-generate configs (toml + json) each time ./start.sh
+# Set this variable to 0 when testing bootstrap from storage or other edge cases where you do not want a fresh new config
+# each time.
+export ALWAYS_UPDATE_CONFIGS=1
+
+# IP of the seednode
+export SEEDNODE_IP="127.0.0.1"
+
+# Ports used by the Nodes
+export PORT_SEEDNODE="9999"
+export PORT_ORIGIN_OBSERVER="21100"
+export PORT_ORIGIN_OBSERVER_REST="10000"
+export PORT_ORIGIN_VALIDATOR="21500"
+export PORT_ORIGIN_VALIDATOR_REST="9500"
+
+# UI configuration profiles
+
+# Use tmux or not. If set to 1, only 2 terminal windows will be opened, and
+# tmux will be used to display the running executables using split windows.
+# Recommended. Tmux needs to be installed.
+export USETMUX=1
+
+# Log level for the logger in the Node.
+export LOGLEVEL="*:INFO"
+
+
+if [ "$TESTNETMODE" == "debug" ]; then
+  LOGLEVEL="*:DEBUG,api:INFO"
+fi
+
+if [ "$TESTNETMODE" == "trace" ]; then
+  LOGLEVEL="*:TRACE"
+fi
+
+########################################################################
+# Proxy configuration
+
+# Path to mx-chain-proxy-go, branch: master. Default: near mx-chain-go.
+export PROXYDIR="$(dirname $MULTIVERSXDIR)/mx-chain-proxy-go/cmd/proxy"
+export PROXY=$PROXYDIR/proxy    # Leave unchanged.
+
+export PORT_PROXY="7950"
+export PROXY_DELAY=10
+
+
+
+########################################################################
+# TxGen configuration
+
+# Path to mx-chain-txgen-go. Default: near mx-chain-go.
+export TXGENDIR="$(dirname $MULTIVERSXDIR)/mx-chain-txgen-go/cmd/txgen"
+export TXGEN=$TXGENDIR/txgen    # Leave unchanged.
+
+export PORT_TXGEN="7951"
+
+export TXGEN_SCENARIOS_LINE='Scenarios = ["basic", "erc20", "esdt"]'
+
+# Number of accounts to be generated by txgen
+export NUMACCOUNTS="250"
+
+# Whether txgen should regenerate its accounts when starting, or not.
+# Recommended value is 1, but 0 is useful to run the txgen a second time, to
+# continue a testing session on the same accounts.
+export TXGEN_REGENERATE_ACCOUNTS=0
+
+# COPY_BACK_CONFIGS when set to 1 will copy back the configs and keys to the ./cmd/node/config directory
+# in order to have a node in the IDE that can run a node in debug mode but in the same network with the rest of the nodes
+# this option greatly helps the debugging process when running a small system test
+export COPY_BACK_CONFIGS=0
+# SKIP_VALIDATOR_IDX when setting a value greater than -1 will not launch the validator with the provided index
+export SKIP_VALIDATOR_IDX=-1
+# SKIP_OBSERVER_IDX when setting a value greater than -1 will not launch the observer with the provided index
+export SKIP_OBSERVER_IDX=-1
+
+# USE_HARDFORK will prepare the nodes to run the hardfork process, if needed
+export USE_HARDFORK=1
+
+# Load local overrides, .gitignored
+LOCAL_OVERRIDES="$MULTIVERSXTESTNETSCRIPTSDIR/local.sh"
+if [ -f "$LOCAL_OVERRIDES" ]; then
+  source "$MULTIVERSXTESTNETSCRIPTSDIR/local.sh"
+fi
+
+# Leave unchanged.
+let "total_observer_count = $SHARD_OBSERVERCOUNT * $SHARDCOUNT + $META_OBSERVERCOUNT"
+export TOTAL_OBSERVERCOUNT=$total_observer_count
+
+# to enable the full archive feature on the observers, please use the --full-archive flag
+export EXTRA_OBSERVERS_FLAGS="-operation-mode db-lookup-extension"
+
+if [[ $MULTI_KEY_NODES -eq 1 ]]; then
+  EXTRA_OBSERVERS_FLAGS="--no-key"
+fi
+
+# Leave unchanged.
+let "total_node_count = $SHARD_VALIDATORCOUNT * $SHARDCOUNT + $META_VALIDATORCOUNT + $TOTAL_OBSERVERCOUNT"
+export TOTAL_NODECOUNT=$total_node_count
+
+# VALIDATOR_KEY_PEM_FILE is the pem file name when running single key mode, with all nodes' keys
+export VALIDATOR_KEY_PEM_FILE="validatorKey.pem"
+
+# MULTI_KEY_PEM_FILE is the pem file name when running multi key mode, with all managed
+export MULTI_KEY_PEM_FILE="allValidatorsKeys.pem"
+
+# EXTRA_KEY_PEM_FILE is the pem file name when running multi key mode, with all extra managed
+export EXTRA_KEY_PEM_FILE="extraValidatorsKeys.pem"