Setup Pi and NASPi Hardware

Update and Upgrade Pi

sudo apt update
sudo apt full-upgrade -y

Install script to control fan

sudo apt install -y vim git curl pigpio python3-pigpio python3-smbus unattended-upgrades apt-transport-https
git clone https://github.com/geekworm-com/x-c1.git 
cd x-c1
sudo chmod +x *.sh
sudo bash install.sh

Add alias for soft shutdown

echo "alias xoff='sudo /usr/local/bin/x-c1-softsd.sh'" >> ~/.bashrc 

Configure unattended-upgrades

sudo dpkg-reconfigure --priority=low unattended-upgrades

Restart Pi

sudo reboot

Clone respository

• Clone repository to home directory

git clone https://github.com/matthewshammond/NASPi.git

• Move plex from NASPi directory to HOME directory

mv NASPi/plex .

Setup Plex Media Server

Add plex key and repository to sources list

echo deb [signed-by=/usr/share/keyrings/plex-archive-keyring.gpg] https://downloads.plex.tv/repo/deb public main | sudo tee /etc/apt/sources.list.d/plexmediaserver.list
curl https://downloads.plex.tv/plex-keys/PlexSign.key | gpg --dearmor | sudo tee /usr/share/keyrings/plex-archive-keyring.gpg >/dev/null

Update sources and install plex media server

sudo apt update
sudo apt install -y plexmediaserver

Configure audio to work through HDMI

• edit /boot/config.txt

sudo vim /boot/config.txt

• change dtoverlay to read

vc4-fkms-v3d

Install window display

Install the X Window System (X11)

• Install xserver-xorg

sudo apt install -y --no-install-recommends xserver-xorg

• Install xinit

sudo apt install -y --no-install-recommends xinit

• Install x11-xserver-utils

sudo apt install -y --no-install-recommends x11-xserver-utils

Install Chromium and kiosk dependencies

• Install chromium-browser

sudo apt install chromium-browser

• Install the kiosk dependencies

sudo apt install matchbox-window-manager xautomation unclutter

Configure xinit to start on boot

• Add following command to .bashrc

echo "xinit /home/pi/plex -- vt$(fgconsole)" >> ~/.bashrc

Setup RASAP to Create Travel Router

• Install RASPAP

curl -sL https://install.raspap.com | bash

Configure Network Settings

• Stop network services

sudo systemctl stop hostapd
sudo systemctl stop dnsmasq

• Modify DHCPCD

sudo vim /etc/dhcpcd.conf

interface wlan0
    static ip_address=10.13.71.1/24
    nohook wpa_supplicant

sudo systemctl restart dhcpcd

• Modify HOSTAPD

sudo nano /etc/hostapd/hostapd.conf

interface=wlan0
driver=nl80211

hw_mode=a
channel=36
ieee80211n=0
wmm_enabled=0
macaddr_acl=0
ignore_broadcast_ssid=0

auth_algs=1
wpa=2
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP
beacon_int=100

ssid=Discovery
wpa_passphrase=password
country_code=US

sudo vim /etc/default/hostapd
DAEMON_CONF="/etc/hostapd/hostapd.conf"
sudo vim /etc/init.d/hostapd
DAEMON_CONF=/etc/hostapd/hostapd.conf

• Modify DNSMASQ

sudo vim /etc/dnsmasq.conf

interface=wlan0       # Use interface wlan0
server=1.1.1.1       # Use Cloudflare DNS
dhcp-range=10.13.71.10,10.13.71.20,12h # IP range and lease time

• Modify SYSCTL

sudo vim /etc/sysctl.conf
net.ipv4.ip_forward=1
sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward"

• Forward all traffic form wlan1 to wlan0

sudo iptables -t nat -A POSTROUTING -o wlan1 -j MASQUERADE

• Save rules to be used on reboot

sudo sh -c "iptables-save > /etc/iptables.ipv4.nat"

• Edit RC.local to set iptables on reboot

sudo vim /etc/rc.local

• Above exit 0 add:

iptables-restore < /etc/iptables.ipv4.nat

Finalize Configuration

sudo systemctl unmask hostapd
sudo systemctl enable hostapd
sudo systemctl start hostapd
sudo service dnsmasq start

Reboot

sudo reboot

Defaults:

IP address: 10.3.141.1
Username: admin
Password: secret
DHCP range: 10.3.141.50 — 10.3.141.255
SSID: raspi-webgui
Password: ChangeMe