Joypad Autoconfig Files

This repository stores joypad autoconfig files for RetroArch, the reference frontend for the libretro API.

The autoconfig files included in this repository are used to recognize input devices and automatically setup default mappings between the physical device and the RetroPad virtual controller.

How to create an autoconfig file

If your input device is not recognized by RetroArch even after updating the controller profiles, then you can generate a new profile for it from RetroArch itself.

You can find detailed instructions to do this in our Joypad Auto Configuration guide.

Please always run Settings -> Input -> RetroPad Binds -> Port 1 Controls -> Save Controller Profile in order to generate correct autoconfig file name, and file content (including input_device). Also, only modify existing autoconfig files with data from Save Controller Profile generated autoconfig files, with other words, do not autoconfig files for controllers that you don't own.

Uploading your own autoconfig file

If you want to share an autoconfig file that is missing in RetroArch, then you can upload it to this repository.

Please remember that the goal of sharing your autoconfig file is to create a bigger database of default input device mappings that can be used by other people.

If your mapping is custom-made for your own needs, then it will not be really useful for others. It is better if you share more generic and reusable mappings that can act as a "default".

To upload your autoconfig file follow these steps

1. Checking for duplicates

RetroArch uses three attributes of the input device to identify which autoconfig file to use: Vendor ID, Product ID and Device Name. Before uploading your file, please verify that there is no other autoconfig file matching those same three attributes already.

To verify, compare the values for input_vendor_id, input_product_id and input_device attributes respectively.

⚠️ Warning: If another autoconfig file exists including the same Vendor ID, Product ID and input Device Name, then your autoconfig file will cause conflicts.

2. Adding input descriptors

Input descriptors are the labels that RetroArch will display in the user interface (UI) to describe buttons and axes of your device. It is recommended to add descriptors so RetroArch can display useful labels in the UI.

Input descriptor attributes are not added by default, you need to manually add the attributes inside the autoconfig file that was generated by RetroArch. For example:

input_b_btn_label = "Cross"
input_y_btn_label = "Square"
input_a_btn_label = "Circle"
input_x_btn_label = "Triangle"

You will find more details about the attribute name syntax in the Input Descriptors section below.

3. Testing your autoconfig file

Before uploading your autoconfig file please verify that RetroArch is correctly detecting the file and also displaying all the labels for the input device. You can verify this in the Settings > Input > Port 1 Controls menu.

The best way to confirm that everything is working is:

1. Reset controller bindings to the defaults: Settings > Input > Port 1 Controls > Reset to Default Controls
2. Disconnect and reconnect the input device
3. Check the bindings in Settings > Input > Port 1 Controls to confirm that they are correct
4. If applicable, then also check the menu button binding in Settings > Input > Hotkeys > Menu (Toggle)

4. Creating a Pull Request

To upload your autoconfig file to this repository you must create a Pull Request.

You can learn how to create a Pull Request in Github in the official documentation.

⚠️ Warning: Verify that you are creating the autoconfig file in the correct folder. It must be the folder with the same name used in the input_driver attribute in the autoconfig file.

File Format

Autoconfig files consist of a list of attributes and their corresponding values using the following syntax:

attribute_name = value

All attribute names in the file use the snake_case naming scheme.

Attribute Types

There are three types of attributes for describing an input device.

1. Device Descriptors

These are attributes that identify the physical input device itself. The available attributes are:

Attribute	Description
input_driver	Driver in-use when the input device was detected
input_device	Device Name reported by the device
input_vendor_id	Vendor ID reported by the device
input_product_id	Product ID reported by the device
input_device_display_name	Friendly display name to show in the user inteface (optional)

2. Button/axes Mappings

These are attributes that describe the mappings between physical buttons/axes and the RetroPad virtual controller.

Button/axes attributes are named following the pattern: input_ + button/axis name + input_type. The input_type suffix can be either _axis for axes or _btn for buttons. For example:

input_b_btn = "0"
input_y_btn = "1"
input_l_x_plus_axis = "+0"
input_l_x_minus_axis = "-0"

The RetroPad virtual controller layout is shown below:

The available attributes for input device mapping are:

Attribute	Description
input_b_btn	Device button mapped to RetroPad's B button
input_y_btn	Device button mapped to RetroPad's Y button
input_select_btn	Device button mapped to RetroPad's Select button
input_start_btn	Device button mapped to RetroPad's Start button
input_up_btn	Device button mapped to RetroPad's D-Pad Up button
input_down_btn	Device button mapped to RetroPad's D-Pad Down button
input_left_btn	Device button mapped to RetroPad's D-Pad Left button
input_right_btn	Device button mapped to RetroPad's D-Pad Right button
input_a_btn	Device button mapped to RetroPad's A button
input_x_btn	Device button mapped to RetroPad's X button
input_l_btn	Device button mapped to RetroPad's Left Shoulder button
input_r_btn	Device button mapped to RetroPad's Right Shoulder button
input_l2_btn	Device button mapped to RetroPad's Left Trigger button
input_r2_btn	Device button mapped to RetroPad's Right Trigger button
input_l3_btn	Device button mapped to RetroPad's Left Thumb button
input_r3_btn	Device button mapped to RetroPad's Right Thumb button
input_l_x_plus_axis	Device axis mapped to RetroPad's Left Analog axis (right)
input_l_x_minus_axis	Device axis mapped to RetroPad's Left Analog axis (left)
input_l_y_plus_axis	Device axis mapped to RetroPad's Left Analog axis (down)
input_l_y_minus_axis	Device axis mapped to RetroPad's Left Analog axis (up)
input_r_x_plus_axis	Device axis mapped to RetroPad's Right Analog axis (right)
input_r_x_minus_axis	Device axis mapped to RetroPad's Right Analog axis (left)
input_r_y_plus_axis	Device axis mapped to RetroPad's Right Analog axis (down)
input_r_y_minus_axis	Device axis mapped to RetroPad's Right Analog axis (up)
input_menu_toggle_btn	Device button mapped to RetroPad's Menu button

3. Input Descriptors

These are attributes that describe the labels that RetroArch will display in the user interface to describe buttons and axes of the input device. They should match the labels printed on the physical controller itself.

Input descriptor attributes are named following the pattern: input name + _label. The input name part is exactly the same as defined in the button/axes mappings section, including the input_ prefix and the _axis or _btn suffix. For example:

input_l2_btn = "5"          <-- Input mapping attribute
input_l2_btn_label = "L2"   <-- Input descriptor attribute

⚠️ Warning: It is important that input name matches exactly the input name defined in the autoconfig file. If the input you are describing is an axis, then the input descriptor must be for an axis as well. For example:

input_l2_axis = "+3"         <-- Input mapping attribute

input_l2_btn_label = "L2"    <-- WRONG descriptor attribute
input_l2_axis_label = "L2"   <-- CORRECT descriptor attribute