Build for RPi3 Tizen

1. Tizen on RPi3 GBS build

Prerequisites

• Install SDB tool (https://developer.tizen.org/development/tizen-studio/download)

  It is required to send file to target, which is in Tizen Studio.

• Modify sources.list of Ubuntu

  It is a buil system to create Tizen RPM package. To install gbs in your system, it's required to add the Tizen tools repository to the source list

  $ sudo vim /etc/apt/sources.list
  

  In Ubuntu 16.04, append the following line to the source list:

  deb [trusted=yes] http://download.tizen.org/tools/latest-release/Ubuntu_16.04/ /

  In Ubuntu 14.04, append the follwing line to the source list:

  deb http://download.tizen.org/tools/latest-release/Ubuntu_14.04/ /

• Install GBS

  sudo apt-get update
  sudo apt-get install gbs

• Prepare a GBS configuration file.

You can use sample gbs configuration in config/tizen/sample.gbs.conf.

See https://source.tizen.org/documentation/reference/git-build-system/configuration-file for details.

Building

• You can modify IoT.js build option on the spec file. (config/tizen/packaging/iotjs.spec)

• Run gbsbuild.sh at first. Compile:

./config/tizen/gbsbuild.sh

The following options are provided.

--debug: Build output is 'debug'. If this option is not specified, it is 'release'.

2. Bring up RPi3 with Tizen

Please see the following guide to bring up your RPI3 target with Tizen. You can refer "Raspberry Pi 3" section of command-line-flash part.

https://developer.tizen.org/development/iot-preview/getting-started/flashing-tizen-images#command-line-flash

Setting up serial port

Please refer the tizen wiki https://wiki.tizen.org/Raspberry_Pi#Debugging

Setting up IP

You can set up IP using WiFi or Ethernet

• Setup IP on RPi3 target using WiFi:

  https://developer.tizen.org/development/iot-preview/getting-started/flashing-tizen-images#wifi-setup

• Setup IP on RPi3 target using ethernet

 User id/passwd : root / tizen
 (target)$ ifconfig eth0 down
 (target)$ ifconfig eth0 192.168.1.11 netmask 255.255.255.0 up
 (target)$ route add default gw 192.168.1.1

If you want to use your fixed ip when you reboot, add ip settings in /etc/profile.

Please make sure to run before modifying /etc/profile.

(target) $ mount -o remount,rw /

 (ubuntu)$ sdb pull /etc/profile
 (ubuntu)$ vi profile

 Adding the following configurations
 ifconfig eth0 down
 ifconfig eth0 192.168.1.11 netmask 255.255.255.0 up
 route add default gw 192.168.1.1

 (ubuntu)$ sdb push profile /etc/

SDB connection

Now you can connect RPi3 on Ubuntu PC

(ubuntu)$ sdb connect 192.168.1.11

Install

Transfer iotjs binary and test file to the device:

(ubuntu)$ sdb push  ~/GBS-ROOT/local/repos/tizen_unified_preview2/armv7l/RPMS/iotjs-1.0.0-0.armv7l.rpm /tmp
(ubuntu)$ sdb push ./test/run_pass/test_console.js /home/owner/iotjs/
(ubuntu)$ sdb root on
(ubuntu)$ sdb shell
(target)$ cd /tmp
(only in headless Tizen 4.0 target)$ mount -o remount,rw /
(target)$ rpm -ivh --force iotjs-1.0.0-0.armv7l.rpm

Run the test:

(ubuntu)$ sdb shell
(target)$ iotjs test_console.js