Skip to content

ineednewpajamas/Jorman_Scripts

 
 

Repository files navigation

TODO

Make some good expalation on how to use these scripts

AddqBittorrentTrackers.sh

The purpose of this script is to inject trackers into your qBittorrent downloads.

It may be executed manually or automatically with Radarr/Sonarr.

This script works with the qBittorrent v4.1+ API. It may work with lower versions, but must be checked. Let me know if you use an earlier version and it works, so I can expand the version compatability.

To use this script you'll need:

  • jq. Check if jq is available for your distro with sudo apt install jq (or the appropriate package management tool)

  • Curl. Install it with sudo apt install curl

  • First make sure your Radarr/Sonarr user can execute the script with a process similar to this:

    • chown USER:GROUP AddqBittorrentTrackers.sh where USER:GROUP is the same user and group as qBittorrent.
    • Then be sure it is executable with: chmod +x AddqBittorrentTrackers.sh
  • Modify the scripts ########## CONFIGURATIONS ########## section:

    • qbt_username -> username to access to qBittorrent Web UI.
    • qbt_password -> password to access to qBittorrent Web UI. Password MUST BE url encoded, otherwise any special characters will break the curl request.
    • Note that if the script runs on the same device that runs qBittorrent, you can set Bypass authentication for clients on localhost. With this option set and when the script runs, the username and password are not required.
    • qbt_host -> if the script is on the same device as qBittorrent http://localhost, otherwise, set this to the remote device.
    • qbt_port -> is the Web UI port.
    • live_trackers_list_url, is the url from where the trackers list is obtained. These lists are automatically generated. You can specify more than one url, just follow the example in the file.
    • The script will automatically check if the torrent is private or public.

Configuration is now complete.

If you are a Radarr and/or Sonarr user, personally I:

  1. Create a custom script (settings -> connect -> add notification -> Custom Script).
  2. The name is not important. I use Add qBitTorrent Trackers, you can use any name you like.
  3. Set "On Grab".
  4. Inside Path field, point to the AddqBittorrentTrackers.sh script.
  5. Save the custom script.

Now, when Radarr and/or Sonarr grabs a new torrent, the script will be automatically triggered and a custom tracker list will be added to the torrent. This is true only if the torrent is not from a private tracker.

To run the script manually, simply run ./AddqBittorrentTrackers.sh. All the possible options will be shown. When calling the script, there are many options to add trackers to torrents.

One note about configuration, if you want to use it manually, you must configure the username, password, host and port within the file. This is for simplicity. Otherwise I would have to insert four new options to be called every time manually, or "complicate" the script by checking for the possibility of a configuration file to be saved somewhere. If it is necessary I will do it, but for now I think it is easier to keep the necessary options hard coded.


AddTransmissionTrackers.sh

The purpose of this script is to inject trakers inside the Transmission torrent

This can be used manually, or with Radarr/Sonarr automatically. To run the script manually, simply run the script ./AddTransmissionTrackers.sh and see all the possible options.

When Radarr and/or Sonarr grabs a new torrent and if the torrent is not from a private tracker, the script is triggered and the custom tracker list populated to the torrent.

In the latest version, I've inserted a new way to call the script, with many options to inject trackers inside torrents.

N.B for those updating to the latest script, Transmission-remote is no longer needed. All commands have been switched to directly use /rpc. This is the very first release with this method.

I've also included the possibility to call the script and specify the name and/or ID where one adds trackers:

  • First ensure your Radarr/Sonarr user can execute the script with something like this:

    • Take ownership with: chown USER:USER AddTransmissionTrackers.sh where USER:GROUP is the same user and group as Transmission.
    • Ensure it is executable: chmod +x AddTransmissionTrackers.sh
  • Modify the scripts ########## CONFIGURATIONS ########## section:

    • transmission_username, transmission_password, transmission_host and transmission_port. These are all the same as your Transmission config.
    • live_trackers_list_url, is the URL where the trackers list is obtained. This is the default list. You may specify more than one URL, just follow the example in the file.
    • The script will automatically check if the torrent is private or public.

The configuration is complete.

If you are a Radarr and/or Sonarr user, personally I:

  1. Create a custom script (settings -> connect -> add notification -> Custom Script).
  2. The name is not important. I use Add Transmission Trackers, you can use any name you like.
  3. Set "On Grab".
  4. Inside Path field, point to the AddTransmissionTrackers.sh script.
  5. Save the custom script.

One note about configuration and using the script manually. Before use you MUST configure the username, password, host and port within the script. Otherwise I would have to insert four new options to be called every time for manual user input, or "complicate" it by having a configuration file saved somewhere. If it's necessary I will do it, but for now I think it is easier to keep only the necessary options.


TransmissionRemoveCompleteTorrent.sh

The purpose of this script is to remove the completed torrent from Transmission, but only the torrent added by Radarr/Sonarr.

The best way is to use it is to cronize it.

This script uses transmission-remote, normally this is already installed if you use transmission.

  • First make sure your Radarr/Sonarr user can execute the script with someting like this:

    • chown USER:USER TransmissionRemoveCompleteTorrent.sh
    • Then ensure it is executable: chmod +x TransmissionRemoveCompleteTorrent.sh
  • Modify the scripts ########## CONFIGURATIONS ########## section:

    • t_username, t_password, t_host and t_port are all Transmission related. Set them accordingly.

    • t_log is to enable the logfile. If set to 1 the logfile will be written to t_log_path.

    • The most important setting is automatic_folder. This is the folder that contains all the automatic downloads

    • I use this folder structure for automatic downloads that came from Radarr/Sonarr:

      • download
        • automatic
          • movie
          • tv_show
    • Within the files configuration example, I've set automatic for automatic_folder option.

    • max_days_seed is the maximum seed time.

    • remove_normal. Pay attention if you set this to true, because this enables a kind of force option that also checks all non-automatic downloads.

  • Lastly, consider using cron for the script. Add this to your cron scheduler with something like this (varies according to your own Linux installs cron manager):

    • 30 01 * * * /PATHOFTHESCRIPT/TransmissionRemoveCompleteTorrent.sh >/dev/null 2>&1
    • this example will execute the script at 01:30 every day.

qBittorrentHardlinksChecker.sh

The idea of this script is very simple, it checks qBittorrents Hard Links.

In my case it helps, judge for yourself if it helps you.

For managing the seed times of automatic downloads from the various *Arr, I normally use autoremove-torrent. It is a very complete and useful script that allows me to pick and choose category by category, tracker by tracker, the various torrent removal settings. This is because my space available is not infinite. So I am forced to do a regular cleanup of the various downloads. I always respect the rules of the various private trackers!

But let's come to the idea: Very simply, if the configuration within the automatic downloading programs *Arr is set to generate hardlinks, then it means that until I have deleted both the file from the torrent client and the linked file that is managed automatically, the space occupied on the disk will be the same. This means that as long as I haven't watched and deleted that movie (etc), I could safely keep the shared downloaded file, because it no longer takes up disk space, being a hardlink.

With this script, for the categories you set, you can check each download. If there are two or more hardlinks the file will not be deleted from qBittorrent. If on the other hand the file has only one hardlink, then the script will consider whether or not to delete the file by checking the minimum seed time that has been set.

Here is an example of usage: Downloads that only end up in the automatic categories, e.g. movie for Radarr (or whatever your category is) rather than tv_show for Sonarr (or whatever your category is), before running autoremove-torrent (which is appropriately configured previously)... I run this script and by doing so I make sure that any "duplicates" are not deleted and remain in seed. This helps me with the share ratio and minimum seed time.

How to use:

  • First make sure your Radarr/Sonarr user can execute the script with something like this:
    • chown USER:GROUP qBittorrentHardlinksChecker.sh where USER:GROUP is the user and group of Radarr/Sonarr.
    • Then be sure it is executable: chmod +x AddqBittorrentTrackers.sh

Note: not being a script that is called from *Arr it's not strictly necessary to change user and group, just make sure that the script can be executed by the user concerned.

  • Modify the scripts ########## CONFIGURATIONS ########## section:
    • qbt_username -> username to access to qBittorrent Web UI.
    • qbt_password -> username to access to qBittorrent Web UI.
    • Note that if the script runs on the same device that runs qBittorrent, you can set Bypass authentication for clients on localhost. When the script executes, the username and password are not required.
    • qbt_host -> if the script is on the same device as qBittorrent use http://localhost, otherwise, set this to the remote device.
    • qbt_port -> is the Web UI port.
    • category_list -> is the list of categories upon which the script performs the check.
    • min_seeding_time -> is the minimum seed time expressed in seconds.
    • only_private -> if true, the script will only check the torrents that are from private trackers. In this way you can set autoremove-torrent in order to remove only the remaining public trackers. This help the share ratio and helps you to find and remove torrents from public trackers with your own rules.
    • private_torrents_check_orphan -> This is only for private trackers. If true, check the torrent and if is not registered, it will be deleted.
    • public_torrent_check_bad_trackers -> Only for public torrents. If true, check the trackers and the bad one/s will be eliminated, but not the torrent itself, only the trackers. Be patient, this can be a "slow" function during the deleting/ion phase.

I recommend you use this script with cron or create a timer for systemd. I personally use it via timer so runs right after autoremove-torrent

About

Some script, forked and not to make me crazy!

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Shell 100.0%