Skip to content

Releases: hyphop/miZy

MX3 H3

03 May 02:41
Compare
Choose a tag to compare

NanoPi NEO Air-LTS

01 May 14:09
Compare
Choose a tag to compare
NanoPi NEO Air-LTS Pre-release
Pre-release

test NanoPi NEO Air-LTS
send result

board_name
dmesg

plz update this wiki https://github.com/hyphop/miZy/wiki/friendly-arm

orangepi-zero - SPI flash 8M + spi display + 3xUART + audio + mic + wifi AP + eth

02 May 16:24
Compare
Choose a tag to compare

// config
orangepi-zero - SPI flash 8M + spi display + 3xUART + audio + mic + wifi AP + eth
// usb
usb otg IP: 172.22.1.1
// ethernet
eth mode : dhcp client
// wifi
wifi mode: AP
wifi IP: 172.23.0.1
wifi ESSID: miZy
wifi password: 12345678
// ssh
port: 22
user: root
// audio
onboard audio lineout + mic
audio test mic monitor - audio.listenmic
// web
http://wifi.mizy/ or http://172.23.0.1/ - via wifi
http://172.22.1.1 - via USB
// serial UART 0
root without password

python + wifi ap + wan dhcp eth + openvpn client + iptables + mobile

20 Jun 09:54
Compare
Choose a tag to compare
	    http://hyphop.github.io/mizy
                        _ ____         
                   _ _ (_)_  / __      
                  / ' '| |/ /\/ /      
                 |_|_|_|_/ /\  /       
                        /___/_/        
                                                      
              tiny fast embedded linux

BASE:	OpenWrt 
	DESIGNATED DRIVER (Bleeding Edge, 50015)
MOD:	base / PY  ## hyphop ##
	wifi (AP mode) +
	    ssid: mizy
	password: 12345678
	      ip: 10.20.30.1
	eth WAN(dhcp) 
	openvpn cli + python 2.7.14 + uarts

root@miZy:~# loadtime 
BOOT_INFO: bootfrom=sd loadfrom=MMC0 loadseq=>MMC0
LOAD_TIME: uboot 1.411 + system 4.24 ( kernel 1.56 )
KERNEL: Linux miZy 3.4.113+ #36 SMP PREEMPT Tue Jul 3 12:51:55 MSK 2018 armv7l GNU/Linux

WIFI AP

ssid: mizy
password: 12345678
ip: 10.20.30.1
ifconfig | egrep "Link|addr"
eth0      Link encap:Ethernet  HWaddr 1E:3D:65:A6:A7:6A  
          inet addr:10.11.0.1  Bcast:10.11.0.255  Mask:255.255.255.0
lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
usb0      Link encap:Ethernet  HWaddr 62:EF:11:22:11:11  
          inet addr:10.1.1.1  Bcast:10.1.1.255  Mask:255.255.255.0
wlan0     Link encap:Ethernet  HWaddr DC:D7:DD:F2:A1:C9  
          inet addr:10.20.30.1  Bcast:10.20.30.255  Mask:255.255.255.0


root@miZy:~# python -V
Python 2.7.14

root@miZy:~# python-test1
hello world! 
root@miZy:~# python-test-serial 
/dev/ttyS1
OK!

root@miZy:~# /tmp/openvpn_example.vpn 
OpenVPN 2.3.10 arm-openwrt-linux-gnu [SSL (PolarSSL)] [LZO] [EPOLL] [MH] [IPv6]
library versions: PolarSSL 1.3.16, LZO 2.09

root@miZy:~# dmesg  | grep uart
[    0.343736] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator.
[    0.343768] sw_uart_get_devinfo()1503 - uart1 has no uart_regulator.
[    0.343798] sw_uart_get_devinfo()1503 - uart2 has no uart_regulator.
[    0.343827] sw_uart_get_devinfo()1503 - uart3 has no uart_regulator.
[    0.344936] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
[    0.344963] sw_uart_pm()890 - uart0 clk is already enable
[    0.346043] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
[    0.346594] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
[    0.347140] uart3: ttyS3 at MMIO 0x1c28c00 (irq = 35) is a SUNXI

root@miZy:~# ls -1 /dev/ttyS?
/dev/ttyS0
/dev/ttyS1
/dev/ttyS2
/dev/ttyS3

orange-pi R1

26 May 17:30
Compare
Choose a tag to compare

orange_pi_h2_h3_miZy-music-box-mpd-net-SPI-pre

17 Jul 08:01
Compare
Choose a tag to compare
updated: Tue Feb 20 11:19:38 ICT 2018
DEVICES: orange pi zero  - h2 
DEVICES: orange pi R1  - r1 
MOD:	miZy musicbox
alsa + ffmpeg + mpd + mpc + wifi + net + ir

*.MMC.hybrid.bin - sd/mmc write only
*.8M.bin - spi image 
*.16M.bin - spi image

Image size

use *8M only for 8M spi usage
prefer *16M !!!

download image example

cd /tmp

wget https://github.com/hyphop/miZy/releases/download/mpd/orange-pi-h2-miZy-musicbox-mpd.MMC.hybrid.8M.8192.bin.gz
gzip -d *.8192.bin.gz
# or 
curl -k -L https://github.com/hyphop/miZy/releases/download/mpd/orange-pi-h2-miZy-musicbox-mpd.MMC.hybrid.8M.8192.bin.gz | gzip -dc >  https://github.com/hyphop/miZy/releases/download/mpd/orange-pi-h2-miZy-musicbox-mpd.MMC.hybrid.8M.8192.bin

write image

MMC hybrid image sd/mmc write

dd of=/dev/mmcblk0 < *.MMC.hybrid.bin
# reboot or boot from device

boot from MMC hybrid image and copy system to SPI

image_copy_sd_spi yes
# remove sd card 
# reboot from spi now

direct write to spi on device (update or upgrade miZy system)

dd bs=65536 of=/dev/mtdblock6 < *M.bin
or
mtd write *M.bin full

write image to SPI via sunxi-tooll FEL mode from host to device

start device in FEL mode and write image to SPI

sunxi-fel -p spiflash-write 0 *M.bin

configure device via usb otg

check host connection ifconfig usb0
login to device ssh [email protected] -p 22
make some customization

nano /etc/rc.local
# add some line like 
# mount -o ro /dev/mmcblk0p1 /tmp/mounts/mmcblk0p1
#
wifi.config MIWIFINAME PASSWORD
wifi.reconfig
get_ca   # update ssl ca certs
get_ca_le # update ssl ca certs

save changes

overlay save -f same as save_changes

web interface + console + help

SECURE NOTE !!!

system is open and "not have passwords" , u must care by himself about system security!!!

LINKS

orange_pi_zero_miZy-mini-turbo

26 Jul 18:40
Compare
Choose a tag to compare
Pre-release
DEVICE: orange pi zero
BASE: miZy
MOD: mini turbo
NOTE: minimal base + fastest system start 

HOW TO: https://github.com/hyphop/miZy/wiki/write-miZy-image