-
Notifications
You must be signed in to change notification settings - Fork 1
hplato/oxc
Folders and files
Name | Name | Last commit message | Last commit date | |
---|---|---|---|---|
Repository files navigation
One-Wire xAP connector ---------------------- Reads a one-wire file system (OWFS) and sends sensor changes out as xAP messages. CHANGES ------- v0.7 - Added Solar Radiation Sensor v0.6 - Added hub support - To use, each of the branches have to be 'turned on'. To do so echo 1 > <owfs_mount_point>/EF.<HUBID>/hub/branch.<x> v0.5 - Added OWFS data collection method v0.4 - Added read_timeout as global or per-sensor config - Improved logging; datetime stamps now displayed v0.3 - properly report humidity in BSC level format (vice percentage) - complain if digitemp program and/or conf file does not exist - allow optional, "extra options" to be passed to digitemp v0.2 - improved error handling - report failed sensors as state=off FUTURE CHANGES (not yet added) -------------- - Ability to assign differing sample rates/priorities to individual sensors - add owfs read timeouts INSTALLATION ----------- oxc may be placed anywhere within your file system. A recommended practice is to place it in /usr/local. oxc must be started with equivalent access/privs as the user that executes digitemp. Start oxc via the command "./oxc.pl" (w/o the quotes) IMPORTANT: If you are starting oxc from a directory other than its installation, you must pass the path to its location. For example: /usr/local/oxc/oxc.pl -path=/usr/local/oxc & More precise control over the lib location and config file location exists via the lib and config arguments. All logging is sent to /tmp/oxc.log by default. You can monitor oxc during execution using the command "tail -f /tmp/oxc.log". CONFIGURATION ------------- Locate your oxc.conf included as a sample in this release. Uncomment any properties that you wish to override. Commented properties show the default values. Additional notes are included as comments within this configuration file. IMPORTANT!! You must specify each sensor and it's one-wire serial number in the oxc.conf file. This information can be obtained from digitemp's own configuration file (albeit in a different format) or by looking in the owfs mount directory.
About
OWFS xAP Connector
Resources
Stars
Watchers
Forks
Releases
No releases published
Packages 0
No packages published