home-assistant · frenck · May 7, 2024 · May 7, 2024
diff --git a/source/_integrations/caldav.markdown b/source/_integrations/caldav.markdown
@@ -21,6 +21,9 @@ related:
     title: To-do list card
   - docs: /integrations/calendar
     title: Calendar
+related:
+  - docs: /docs/configuration/
+    title: Configuration file
 ---
 
 The **CalDAV** integration allows you to connect your WebDAV calendar to Home Assistant
@@ -47,7 +50,8 @@ This integration was tested against the following systems, but any other complyi
 
 ## Manual configuration
 
-You may also manually add a WebDAV calendar in Home Assistant by adding the following section to your `configuration.yaml` file. This method does not support to-do lists.
+You may also manually add a WebDAV calendar in Home Assistant by adding the following section to your {% term "`configuration.yaml`" %} file. This method does not support to-do lists. 
+{% include integrations/restart_ha_after_config_inclusion.md %}
 
 {% details Manual configuration examples %}
 

diff --git a/source/_integrations/channels.markdown b/source/_integrations/channels.markdown
@@ -9,6 +9,9 @@ ha_domain: channels
 ha_platforms:
   - media_player
 ha_integration_type: integration
+related:
+  - docs: /docs/configuration/
+    title: Configuration file
 ---
 
 The Channels platform allows you to control [Channels](https://getchannels.com/) from Home Assistant. Play, pause, seek, or skip commercials on an instance of Channels that is running on your network.
@@ -17,7 +20,8 @@ Your favorite channels will appear as sources in the Source List in Home Assista
 
 ## Configuration
 
-To add Channels to your installation, add the following to your `configuration.yaml` file:
+To add Channels to your installation, add the following to your {% term "`configuration.yaml`" %} file.
+{% include integrations/restart_ha_after_config_inclusion.md %}
 
 ```yaml
 # Example configuration.yaml entry
@@ -48,23 +52,23 @@ name:
 
 Seek forward by the number of seconds currently set in settings on the instance of Channels.
 
-| Service data attribute | Optional | Description |
-| ---------------------- | -------- | ----------- |
-| `entity_id` | no | String that points at `entity_id` of Channels app.
+| Service data attribute | Optional | Description                                        |
+| ---------------------- | -------- | -------------------------------------------------- |
+| `entity_id`            | no       | String that points at `entity_id` of Channels app. |
 
 ### Service `seek_backward`
 
 Seek backward by the number of seconds currently set in settings on the instance of Channels.
 
-| Service data attribute | Optional | Description |
-| ---------------------- | -------- | ----------- |
-| `entity_id` | no | String that points at `entity_id` of Channels app.
+| Service data attribute | Optional | Description                                        |
+| ---------------------- | -------- | -------------------------------------------------- |
+| `entity_id`            | no       | String that points at `entity_id` of Channels app. |
 
 ### Service `seek_by`
 
 Seek forward or backward by a provided number of seconds.
 
-| Service data attribute | Optional | Description |
-| ---------------------- | -------- | ----------- |
-| `entity_id` | no | String that points at `entity_id` of Channels app.
-| `seconds` | no | Number of seconds to seek in the timeline by. Negative seconds seeks backwards.
+| Service data attribute | Optional | Description                                                                     |
+| ---------------------- | -------- | ------------------------------------------------------------------------------- |
+| `entity_id`            | no       | String that points at `entity_id` of Channels app.                              |
+| `seconds`              | no       | Number of seconds to seek in the timeline by. Negative seconds seeks backwards. |
diff --git a/source/_integrations/cisco_ios.markdown b/source/_integrations/cisco_ios.markdown
@@ -11,6 +11,9 @@ ha_domain: cisco_ios
 ha_platforms:
   - device_tracker
 ha_integration_type: integration
+related:
+  - docs: /docs/configuration/
+    title: Configuration file
 ---
 
 This is a presence detection scanner for [Cisco IOS](https://www.cisco.com/) devices.
@@ -49,7 +52,8 @@ If you have a very large number of devices on your VLan (+1000), then you may wa
 
 </div>
 
-To use this device tracker in your installation, add the following to your `configuration.yaml` file:
+To use this device tracker in your installation, add the following to your {% term "`configuration.yaml`" %} file.
+{% include integrations/restart_ha_after_config_inclusion.md %}
 
 ```yaml
 # Example configuration.yaml entry

diff --git a/source/_integrations/cisco_mobility_express.markdown b/source/_integrations/cisco_mobility_express.markdown
@@ -11,11 +11,15 @@ ha_domain: cisco_mobility_express
 ha_platforms:
   - device_tracker
 ha_integration_type: integration
+related:
+  - docs: /docs/configuration/
+    title: Configuration file
 ---
 
 This is a presence detection scanner for [Cisco](https://www.cisco.com) Mobility Express wireless controllers.
 
-To use this device tracker in your installation, add the following to your `configuration.yaml` file:
+To use this device tracker in your installation, add the following to your {% term "`configuration.yaml`" %} file.
+{% include integrations/restart_ha_after_config_inclusion.md %}
 
 ```yaml
 # Example configuration.yaml entry

diff --git a/source/_integrations/cisco_webex_teams.markdown b/source/_integrations/cisco_webex_teams.markdown
@@ -11,6 +11,9 @@ ha_domain: cisco_webex_teams
 ha_platforms:
   - notify
 ha_integration_type: integration
+related:
+  - docs: /docs/configuration/
+    title: Configuration file
 ---
 
 The `cisco_webex_teams` notification platform allows you to deliver rich notifications from Home Assistant to [Cisco Webex Teams](https://www.webex.com/team-collaboration.html) (formerly known as Cisco Spark).
@@ -32,7 +35,8 @@ You must add the bot email (in the format `[email protected]`) as a participant to
 
 </div>
 
-To enable this platform in your installation, add the following to your `configuration.yaml` file:
+To enable this platform in your installation, add the following to your {% term "`configuration.yaml`" %} file.
+{% include integrations/restart_ha_after_config_inclusion.md %}
 
 ```yaml
 # Example configuration.yaml entry

diff --git a/source/_integrations/citybikes.markdown b/source/_integrations/citybikes.markdown
@@ -9,13 +9,17 @@ ha_domain: citybikes
 ha_platforms:
   - sensor
 ha_integration_type: integration
+related:
+  - docs: /docs/configuration/
+    title: Configuration file
 ---
 
 The `citybikes` sensor platform monitors bike availability at bike sharing stations in a chosen area. The data is provided by [CityBikes](https://citybik.es/#about), which supports bike sharing systems all around the world.
 
 ## Configuration
 
-To enable it, add the following lines to your `configuration.yaml`:
+To enable it, add the following lines to your {% term "`configuration.yaml`" %} file.
+{% include integrations/restart_ha_after_config_inclusion.md %}
 
 ```yaml
 # Example configuration.yaml entry (using radius)

diff --git a/source/_integrations/clementine.markdown b/source/_integrations/clementine.markdown
@@ -9,11 +9,15 @@ ha_domain: clementine
 ha_platforms:
   - media_player
 ha_integration_type: integration
+related:
+  - docs: /docs/configuration/
+    title: Configuration file
 ---
 
 The `clementine` platform allows you to control a [Clementine Music Player](https://www.clementine-player.org).
 
-To add a Clementine Player to your Home Assistant installation, add the following to your `configuration.yaml` file:
+To add a Clementine Player to your Home Assistant installation, add the following to your {% term "`configuration.yaml`" %} file.
+{% include integrations/restart_ha_after_config_inclusion.md %}
 
 ```yaml
 # Example configuration.yaml entry

diff --git a/source/_integrations/clickatell.markdown b/source/_integrations/clickatell.markdown
@@ -9,6 +9,9 @@ ha_domain: clickatell
 ha_platforms:
   - notify
 ha_integration_type: integration
+related:
+  - docs: /docs/configuration/
+    title: Configuration file
 ---
 
 The `clickatell` platform uses [Clickatell](https://www.clickatell.com) to deliver SMS notifications from Home Assistant.
@@ -26,7 +29,8 @@ Go to your [Clickatell SMS Platform Portal](https://portal.clickatell.com/#/) se
 
 ## Configuration
 
-To add Clickatell to your installation, add the following to your Home Assistant `configuration.yaml` file:
+To add Clickatell to your installation, add the following to your Home Assistant {% term "`configuration.yaml`" %} file.
+{% include integrations/restart_ha_after_config_inclusion.md %}
 
 ```yaml
 # Example configuration.yaml entry

diff --git a/source/_integrations/clicksend.markdown b/source/_integrations/clicksend.markdown
@@ -9,6 +9,9 @@ ha_iot_class: Cloud Push
 ha_platforms:
   - notify
 ha_integration_type: integration
+related:
+  - docs: /docs/configuration/
+    title: Configuration file
 ---
 
 The `clicksend` platform uses [ClickSend](https://clicksend.com) to deliver notifications from Home Assistant.
@@ -19,7 +22,8 @@ Go to your [ClickSend Dashboard](https://dashboard.clicksend.com) section and cr
 
 ## Configuration
 
-To add ClickSend to your installation, add the following to your Home Assistant `configuration.yaml` file:
+To add ClickSend to your installation, add the following to your Home Assistant {% term "`configuration.yaml`" %} file.
+{% include integrations/restart_ha_after_config_inclusion.md %}
 
 ```yaml
 # Example configuration.yaml entry

diff --git a/source/_integrations/cmus.markdown b/source/_integrations/cmus.markdown
@@ -13,7 +13,10 @@ ha_integration_type: integration
 
 The `cmus` platform allows you to control a [cmus](https://cmus.github.io/) music player on a remote or local machine from Home Assistant.
 
-To add cmus to your installation, add the following to your `configuration.yaml` file if running locally it will look like:
+To add cmus to your installation, add the following to your {% term "`configuration.yaml`" %} file.
+{% include integrations/restart_ha_after_config_inclusion.md %}
+
+Running it locally will look like:
 
 ```yaml
 # Example configuration.yaml entry

diff --git a/source/_integrations/comed_hourly_pricing.markdown b/source/_integrations/comed_hourly_pricing.markdown
@@ -15,7 +15,8 @@ The ComEd Hourly Pricing program is an optional program available to ComEd elect
 
 There are two price feeds available: the 5-minute price and current hour average price.
 
-To use this sensor in your installation, add the following to your `configuration.yaml` file:
+To use this sensor in your installation, add the following to your {% term "`configuration.yaml`" %} file.
+{% include integrations/restart_ha_after_config_inclusion.md %}
 
 ```yaml
 # Example configuration.yaml entry

@@ -19,6 +19,9 @@ ha_platforms:
 ha_integration_type: integration
 ha_codeowners:
   - '@gjohansson-ST'
+related:
+  - docs: /docs/configuration/
+    title: Configuration file
 ---
 
 The **Command line** {% term integration %} offers functionality that issues specific commands to get data or to control a device.

diff --git a/source/_integrations/compensation.markdown b/source/_integrations/compensation.markdown
@@ -18,7 +18,8 @@ The **Compensation** {% term integration %} consumes the {% term state %} from o
 
 ## Configuration
 
-To enable the compensation sensor, add the following lines to your `configuration.yaml`:
+To enable the compensation sensor, add the following lines to your {% term "`configuration.yaml`" %} file.
+{% include integrations/restart_ha_after_config_inclusion.md %}
 
 ```yaml
 # Example configuration.yaml entry

diff --git a/source/_integrations/concord232.markdown b/source/_integrations/concord232.markdown
@@ -24,7 +24,8 @@ There is currently support for the following device types within Home Assistant:
 
 ## Alarm control panel
 
-To enable the alarm control panel platform, add the following lines to your `configuration.yaml`:
+To enable the alarm control panel platform, add the following lines to your {% term "`configuration.yaml`" %} file.
+{% include integrations/restart_ha_after_config_inclusion.md %}
 
 ```yaml
 # Example configuration.yaml entry

diff --git a/source/_integrations/cppm_tracker.markdown b/source/_integrations/cppm_tracker.markdown
@@ -23,7 +23,8 @@ You must first create an API client [here](https://www.arubanetworks.com/techdoc
 
 </div>
 
-To use this device tracker in your installation, add the following to your `configuration.yaml` file:
+To use this device tracker in your installation, add the following to your {% term "`configuration.yaml`" %} file.
+{% include integrations/restart_ha_after_config_inclusion.md %}
 
 ```yaml
 # Example configuration.yaml entry

@@ -11,6 +11,9 @@ ha_domain: cups
 ha_platforms:
   - sensor
 ha_integration_type: integration
+related:
+  - docs: /docs/configuration/
+    title: Configuration file
 ---
 
 The `cups` sensor platform uses the open source printing system [CUPS](https://www.cups.org/) to show details about your printers, including the ink levels. It can obtain the information using a CUPS server or by communicating directly with the printer with the Internet Printing Protocol.
@@ -27,7 +30,8 @@ To set up the sensor the "Queue Name" of the printer is needed. The fastest way
 
 ## Configuration
 
-To enable the CUPS sensor, add the following lines to your `configuration.yaml`:
+To enable the CUPS sensor, add the following lines to your {% term "`configuration.yaml`" %} file.
+{% include integrations/restart_ha_after_config_inclusion.md %}
 
 ```yaml
 # Example configuration.yaml entry

diff --git a/source/_integrations/currencylayer.markdown b/source/_integrations/currencylayer.markdown
@@ -9,6 +9,9 @@ ha_domain: currencylayer
 ha_platforms:
   - sensor
 ha_integration_type: integration
+related:
+  - docs: /docs/configuration/
+    title: Configuration file
 ---
 
 The `currencylayer` sensor will show you the current exchange rate from [Currencylayer](https://currencylayer.com/) that provides real-time exchange rates for [170 currencies](https://currencylayer.com/currencies). The free account is limited to only USD as a base currency, allows 250 requests per month and updates daily.
@@ -19,7 +22,8 @@ Obtain your API key from [here](https://currencylayer.com/product).
 
 ## Configuration
 
-To enable this sensor, add the following lines to your `configuration.yaml` file:
+To enable this sensor, add the following lines to your {% term "`configuration.yaml`" %} file.
+{% include integrations/restart_ha_after_config_inclusion.md %}
 
 ```yaml
 # Example configuration.yaml entry