Introduction

Source Connectors

RabbitMQSourceConnector

Connector is used to read from a RabbitMQ Queue or Topic.

Configuration

`kafka.topic`

Importance: High

Type: String

Kafka topic to write the messages to.

`rabbitmq.queue`

Importance: High

Type: List

rabbitmq.queue

`rabbitmq.host`

Importance: High

Type: String

Default Value: localhost

The RabbitMQ host to connect to. See ConnectionFactory.setHost(java.lang.String) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/ConnectionFactory.html#setHost-java.lang.String->_

`rabbitmq.password`

Importance: High

Type: String

Default Value: guest

The password to authenticate to RabbitMQ with. See ConnectionFactory.setPassword(java.lang.String) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/ConnectionFactory.html#setPassword-java.lang.String->_

`rabbitmq.username`

Importance: High

Type: String

Default Value: guest

The username to authenticate to RabbitMQ with. See ConnectionFactory.setUsername(java.lang.String) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/ConnectionFactory.html#setUsername-java.lang.String->_

`rabbitmq.virtual.host`

Importance: High

Type: String

Default Value: /

Converter to compose the Kafka message.

`message.converter`

Importance: Medium

Type: String

Default Value: com.github.galgus.kafka.connect.rabbitmq.source.data.MessageConverter

The virtual host to use when connecting to the broker. See ConnectionFactory.setVirtualHost(java.lang.String) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/ConnectionFactory.html#setVirtualHost-java.lang.String->_

`rabbitmq.port`

Importance: Medium

Type: Int

Default Value: 5672

The RabbitMQ port to connect to. See ConnectionFactory.setPort(int) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/ConnectionFactory.html#setPort-int->_

`rabbitmq.prefetch.count`

Importance: Medium

Type: Int

Default Value: 0

Maximum number of messages that the server will deliver, 0 if unlimited. See Channel.basicQos(int, boolean) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/Channel.html#basicQos-int-boolean->_

`rabbitmq.prefetch.global`

Importance: Medium

Type: Boolean

Default Value: false

True if the settings should be applied to the entire channel rather than each consumer. See Channel.basicQos(int, boolean) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/Channel.html#basicQos-int-boolean->_

`rabbitmq.automatic.recovery.enabled`

Importance: Low

Type: Boolean

Default Value: true

Enables or disables automatic connection recovery. See ConnectionFactory.setAutomaticRecoveryEnabled(boolean) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/ConnectionFactory.html#setAutomaticRecoveryEnabled-boolean->_

`rabbitmq.connection.timeout.ms`

Importance: Low

Type: Int

Default Value: 60000

Connection TCP establishment timeout in milliseconds. zero for infinite. See ConnectionFactory.setConnectionTimeout(int) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/ConnectionFactory.html#setConnectionTimeout-int->_

`rabbitmq.handshake.timeout.ms`

Importance: Low

Type: Int

Default Value: 10000

The AMQP0-9-1 protocol handshake timeout, in milliseconds. See ConnectionFactory.setHandshakeTimeout(int) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/ConnectionFactory.html#setHandshakeTimeout-int->_

`rabbitmq.network.recovery.interval.ms`

Importance: Low

Type: Int

Default Value: 10000

See ConnectionFactory.setNetworkRecoveryInterval(long) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/ConnectionFactory.html#setNetworkRecoveryInterval-long->_

`rabbitmq.requested.channel.max`

Importance: Low

Type: Int

Default Value: 0

Initially requested maximum channel number. Zero for unlimited. See ConnectionFactory.setRequestedChannelMax(int) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/ConnectionFactory.html#setRequestedChannelMax-int->_

`rabbitmq.requested.frame.max`

Importance: Low

Type: Int

Default Value: 0

Initially requested maximum frame size, in octets. Zero for unlimited. See ConnectionFactory.setRequestedFrameMax(int) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/ConnectionFactory.html#setRequestedFrameMax-int->_

`rabbitmq.requested.heartbeat.seconds`

Importance: Low

Type: Int

Default Value: 60

Set the requested heartbeat timeout. Heartbeat frames will be sent at about 1/2 the timeout interval. If server heartbeat timeout is configured to a non-zero value, this method can only be used to lower the value; otherwise any value provided by the client will be used. See ConnectionFactory.setRequestedHeartbeat(int) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/ConnectionFactory.html#setRequestedHeartbeat-int->_

`rabbitmq.shutdown.timeout.ms`

Importance: Low

Type: Int

Default Value: 10000

Set the shutdown timeout. This is the amount of time that Consumer implementations have to continue working through deliveries (and other Consumer callbacks) after the connection has closed but before the ConsumerWorkService is torn down. If consumers exceed this timeout then any remaining queued deliveries (and other Consumer callbacks, including the Consumer's handleShutdownSignal() invocation) will be lost. See ConnectionFactory.setShutdownTimeout(int) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/ConnectionFactory.html#setShutdownTimeout-int->_

`rabbitmq.topology.recovery.enabled`

Importance: Low

Type: Boolean

Default Value: true

Enables or disables topology recovery. See ConnectionFactory.setTopologyRecoveryEnabled(boolean) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/ConnectionFactory.html#setTopologyRecoveryEnabled-boolean->_

Examples

Standalone Example

This configuration is used typically along with standalone mode.

name=RabbitMQSourceConnector1
connector.class=com.github.galgus.kafka.connect.rabbitmq.source.RabbitMQSourceConnector
tasks.max=1
kafka.topic=< Required Configuration >
rabbitmq.queue=< Required Configuration >

Distributed Example

This configuration is used typically along with distributed mode. Write the following json to connector.json, configure all of the required values, and use the command below to post the configuration to one the distributed connect worker(s).

{
  "config" : {
    "name" : "RabbitMQSourceConnector1",
    "connector.class" : "com.github.galgus.kafka.connect.rabbitmq.source.RabbitMQSourceConnector",
    "tasks.max" : "1",
    "kafka.topic" : "< Required Configuration >",
    "rabbitmq.queue" : "< Required Configuration >"
  }
}

Use curl to post the configuration to one of the Kafka Connect Workers. Change http://localhost:8083/ the the endpoint of one of your Kafka Connect worker(s).

Create a new instance.

curl -s -X POST -H 'Content-Type: application/json' --data @connector.json http://localhost:8083/connectors

Update an existing instance.

curl -s -X PUT -H 'Content-Type: application/json' --data @connector.json http://localhost:8083/connectors/TestSinkConnector1/config

Sink Connectors

RabbitMQSinkConnector

Connector is used to read data from a Kafka topic and publish it on a RabbitMQ exchange and routing key pair.

Configuration

`rabbitmq.exchange`

Importance: High

Type: String

exchange to publish the messages on.

`rabbitmq.routing.key`

Importance: High

Type: String

routing key used for publishing the messages.

`topics`

Importance: High

Type: String

Kafka topic to read the messages from.

`rabbitmq.host`

Importance: High

Type: String

Default Value: localhost

The RabbitMQ host to connect to. See ConnectionFactory.setHost(java.lang.String) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/ConnectionFactory.html#setHost-java.lang.String->_

`rabbitmq.password`

Importance: High

Type: String

Default Value: guest

The password to authenticate to RabbitMQ with. See ConnectionFactory.setPassword(java.lang.String) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/ConnectionFactory.html#setPassword-java.lang.String->_

`rabbitmq.username`

Importance: High

Type: String

Default Value: guest

The username to authenticate to RabbitMQ with. See ConnectionFactory.setUsername(java.lang.String) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/ConnectionFactory.html#setUsername-java.lang.String->_

`rabbitmq.virtual.host`

Importance: High

Type: String

Default Value: /

The virtual host to use when connecting to the broker. See ConnectionFactory.setVirtualHost(java.lang.String) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/ConnectionFactory.html#setVirtualHost-java.lang.String->_

`rabbitmq.port`

Importance: Medium

Type: Int

Default Value: 5672

The RabbitMQ port to connect to. See ConnectionFactory.setPort(int) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/ConnectionFactory.html#setPort-int->_

`rabbitmq.automatic.recovery.enabled`

Importance: Low

Type: Boolean

Default Value: true

Enables or disables automatic connection recovery. See ConnectionFactory.setAutomaticRecoveryEnabled(boolean) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/ConnectionFactory.html#setAutomaticRecoveryEnabled-boolean->_

`rabbitmq.connection.timeout.ms`

Importance: Low

Type: Int

Default Value: 60000

Connection TCP establishment timeout in milliseconds. zero for infinite. See ConnectionFactory.setConnectionTimeout(int) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/ConnectionFactory.html#setConnectionTimeout-int->_

`rabbitmq.handshake.timeout.ms`

Importance: Low

Type: Int

Default Value: 10000

The AMQP0-9-1 protocol handshake timeout, in milliseconds. See ConnectionFactory.setHandshakeTimeout(int) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/ConnectionFactory.html#setHandshakeTimeout-int->_

`rabbitmq.network.recovery.interval.ms`

Importance: Low

Type: Int

Default Value: 10000

See ConnectionFactory.setNetworkRecoveryInterval(long) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/ConnectionFactory.html#setNetworkRecoveryInterval-long->_

`rabbitmq.requested.channel.max`

Importance: Low

Type: Int

Default Value: 0

Initially requested maximum channel number. Zero for unlimited. See ConnectionFactory.setRequestedChannelMax(int) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/ConnectionFactory.html#setRequestedChannelMax-int->_

`rabbitmq.requested.frame.max`

Importance: Low

Type: Int

Default Value: 0

Initially requested maximum frame size, in octets. Zero for unlimited. See ConnectionFactory.setRequestedFrameMax(int) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/ConnectionFactory.html#setRequestedFrameMax-int->_

`rabbitmq.requested.heartbeat.seconds`

Importance: Low

Type: Int

Default Value: 60

Set the requested heartbeat timeout. Heartbeat frames will be sent at about 1/2 the timeout interval. If server heartbeat timeout is configured to a non-zero value, this method can only be used to lower the value; otherwise any value provided by the client will be used. See ConnectionFactory.setRequestedHeartbeat(int) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/ConnectionFactory.html#setRequestedHeartbeat-int->_

`rabbitmq.shutdown.timeout.ms`

Importance: Low

Type: Int

Default Value: 10000

Set the shutdown timeout. This is the amount of time that Consumer implementations have to continue working through deliveries (and other Consumer callbacks) after the connection has closed but before the ConsumerWorkService is torn down. If consumers exceed this timeout then any remaining queued deliveries (and other Consumer callbacks, including the Consumer's handleShutdownSignal() invocation) will be lost. See ConnectionFactory.setShutdownTimeout(int) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/ConnectionFactory.html#setShutdownTimeout-int->_

`rabbitmq.topology.recovery.enabled`

Importance: Low

Type: Boolean

Default Value: true

Enables or disables topology recovery. See ConnectionFactory.setTopologyRecoveryEnabled(boolean) <https://www.rabbitmq.com/releases/rabbitmq-java-client/current-javadoc/com/rabbitmq/client/ConnectionFactory.html#setTopologyRecoveryEnabled-boolean->_

Examples

Standalone Example

This configuration is used typically along with standalone mode.

name=RabbitMQSinkConnector1
connector.class=com.github.galgus.kafka.connect.rabbitmq.sink.RabbitMQSinkConnector
tasks.max=1
topics=< Required Configuration >
rabbitmq.exchange=< Required Configuration >
rabbitmq.routing.key=< Required Configuration >
topics=< Required Configuration >

Distributed Example

This configuration is used typically along with distributed mode. Write the following json to connector.json, configure all of the required values, and use the command below to post the configuration to one the distributed connect worker(s).

{
  "config" : {
    "name" : "RabbitMQSinkConnector1",
    "connector.class" : "com.github.galgus.kafka.connect.rabbitmq.sink.RabbitMQSinkConnector",
    "tasks.max" : "1",
    "topics" : "< Required Configuration >",
    "rabbitmq.exchange" : "< Required Configuration >",
    "rabbitmq.routing.key" : "< Required Configuration >"
  }
}

Use curl to post the configuration to one of the Kafka Connect Workers. Change http://localhost:8083/ the the endpoint of one of your Kafka Connect worker(s).

Create a new instance.

curl -s -X POST -H 'Content-Type: application/json' --data @connector.json http://localhost:8083/connectors

Update an existing instance.

curl -s -X PUT -H 'Content-Type: application/json' --data @connector.json http://localhost:8083/connectors/TestSinkConnector1/config

SSL/TLS

Configuration

`rabbitmq.ssl.keystore.location`

Importance: Low

Type: String

Default Value: ""

Path to the keystore.

`rabbitmq.ssl.keystore.password`

Importance: Low

Type: String

Default Value: ""

Keystore password.

`rabbitmq.ssl.keystore.passphrase`

Importance: Low

Type: String

Default Value: ""

Keystore passphrase.

`rabbitmq.ssl.keystore.type`

Importance: Low

Type: String

Default Value: "JKS"

Keystore type.

`rabbitmq.ssl.truststore.location`

Importance: Low

Type: String

Default Value: ""

Path to the truststore.

`rabbitmq.ssl.truststore.password`

Importance: Low

Type: String

Default Value: ""

Truststore password.

`rabbitmq.ssl.truststore.type`

Importance: Low

Type: String

Default Value: "JKS"

Truststore type.

`rabbitmq.ssl.protocol`

Importance: Low

Type: String

Default Value: "TLSv1.3"

SSL/TLS protocol version.

Examples

Standalone Example

This configuration is used typically along with standalone mode.

name=RabbitMQSourceConnector1
connector.class=com.github.galgus.kafka.connect.rabbitmq.source.RabbitMQSourceConnector
tasks.max=1
kafka.topic=< Required Configuration >
rabbitmq.queue=< Required Configuration >
rabbitmq.ssl=< Value<Boolean> >
rabbitmq.ssl.keystore.location=< Value<String> >
rabbitmq.ssl.keystore.password=< Value<String> >
rabbitmq.ssl.keystore.passphrase=< Value<String> >
rabbitmq.ssl.keystore.type=< Value<String> >
rabbitmq.ssl.truststore.location=< Value<String> >
rabbitmq.ssl.truststore.password=< Value<String> >
rabbitmq.ssl.truststore.type=< Value<String> >
rabbitmq.ssl.protocol=< Value<String> >

Distributed Example

This configuration is used typically along with distributed mode. Write the following json to connector.json, configure all of the required values, and use the command below to post the configuration to one the distributed connect worker(s).

{
  "config" : {
    "name" : "RabbitMQSourceConnector1",
    "connector.class" : "com.github.galgus.kafka.connect.rabbitmq.source.RabbitMQSourceConnector",
    "tasks.max" : "1",
    "kafka.topic" : "< Required Configuration >",
    "rabbitmq.queue" : "< Required Configuration >",
    "rabbitmq.ssl" : "true",
    "rabbitmq.ssl.keystore.location" : "< Value<String> >",
    "rabbitmq.ssl.keystore.password" : "< Value<String> >",
    "rabbitmq.ssl.keystore.passphrase" : "< Value<String> >",
    "rabbitmq.ssl.keystore.type" : "< Value<String> >",
    "rabbitmq.ssl.truststore.location" : "< Value<String> >",
    "rabbitmq.ssl.truststore.password" : "< Value<String> >",
    "rabbitmq.ssl.truststore.type" : "< Value<String> >",
    "rabbitmq.ssl.protocol" : "< Value<String> >"
  }
}

Use curl to post the configuration to one of the Kafka Connect Workers. Change http://localhost:8083/ the the endpoint of one of your Kafka Connect worker(s).

Create a new instance.

curl -s -X POST -H 'Content-Type: application/json' --data @connector.json http://localhost:8083/connectors

Update an existing instance.

curl -s -X PUT -H 'Content-Type: application/json' --data @connector.json http://localhost:8083/connectors/TestSinkConnector1/config

Name		Name	Last commit message	Last commit date
Latest commit History 105 Commits
.github/workflows		.github/workflows
bin		bin
src		src
.gitignore		.gitignore
LICENSE		LICENSE
README.md		README.md
docker-compose.yml		docker-compose.yml
pom.xml		pom.xml

License

galgus/kafka-connect-rabbitmq

Folders and files

Latest commit

History

Repository files navigation

Introduction

Source Connectors

RabbitMQSourceConnector

Configuration

kafka.topic

rabbitmq.queue

rabbitmq.host

rabbitmq.password

rabbitmq.username

rabbitmq.virtual.host

message.converter

rabbitmq.port

rabbitmq.prefetch.count

rabbitmq.prefetch.global

rabbitmq.automatic.recovery.enabled

rabbitmq.connection.timeout.ms

rabbitmq.handshake.timeout.ms

rabbitmq.network.recovery.interval.ms

rabbitmq.requested.channel.max

rabbitmq.requested.frame.max

rabbitmq.requested.heartbeat.seconds

rabbitmq.shutdown.timeout.ms

rabbitmq.topology.recovery.enabled

Examples

Standalone Example

Distributed Example

Sink Connectors

RabbitMQSinkConnector

Configuration

rabbitmq.exchange

rabbitmq.routing.key

topics

rabbitmq.host

rabbitmq.password

rabbitmq.username

rabbitmq.virtual.host

rabbitmq.port

rabbitmq.automatic.recovery.enabled

rabbitmq.connection.timeout.ms

rabbitmq.handshake.timeout.ms

rabbitmq.network.recovery.interval.ms

rabbitmq.requested.channel.max

rabbitmq.requested.frame.max

rabbitmq.requested.heartbeat.seconds

rabbitmq.shutdown.timeout.ms

rabbitmq.topology.recovery.enabled

Examples

Standalone Example

Distributed Example

SSL/TLS

Configuration

rabbitmq.ssl.keystore.location

rabbitmq.ssl.keystore.password

rabbitmq.ssl.keystore.passphrase

rabbitmq.ssl.keystore.type

rabbitmq.ssl.truststore.location

rabbitmq.ssl.truststore.password

rabbitmq.ssl.truststore.type

rabbitmq.ssl.protocol

Examples

Standalone Example

Distributed Example

About

Topics

Resources

License

Stars

Watchers

Forks

Releases 4

Packages 0

Languages

`kafka.topic`

`rabbitmq.queue`

`rabbitmq.host`

`rabbitmq.password`

`rabbitmq.username`

`rabbitmq.virtual.host`

`message.converter`

`rabbitmq.port`

`rabbitmq.prefetch.count`

`rabbitmq.prefetch.global`

`rabbitmq.automatic.recovery.enabled`

`rabbitmq.connection.timeout.ms`

`rabbitmq.handshake.timeout.ms`

`rabbitmq.network.recovery.interval.ms`

`rabbitmq.requested.channel.max`

`rabbitmq.requested.frame.max`

`rabbitmq.requested.heartbeat.seconds`

`rabbitmq.shutdown.timeout.ms`

`rabbitmq.topology.recovery.enabled`

`rabbitmq.exchange`

`rabbitmq.routing.key`

`topics`

`rabbitmq.host`

`rabbitmq.password`

`rabbitmq.username`

`rabbitmq.virtual.host`

`rabbitmq.port`

`rabbitmq.automatic.recovery.enabled`

`rabbitmq.connection.timeout.ms`

`rabbitmq.handshake.timeout.ms`

`rabbitmq.network.recovery.interval.ms`

`rabbitmq.requested.channel.max`

`rabbitmq.requested.frame.max`

`rabbitmq.requested.heartbeat.seconds`

`rabbitmq.shutdown.timeout.ms`

`rabbitmq.topology.recovery.enabled`

`rabbitmq.ssl.keystore.location`

`rabbitmq.ssl.keystore.password`

`rabbitmq.ssl.keystore.passphrase`

`rabbitmq.ssl.keystore.type`

`rabbitmq.ssl.truststore.location`

`rabbitmq.ssl.truststore.password`

`rabbitmq.ssl.truststore.type`

`rabbitmq.ssl.protocol`

Packages