Merge pull request AVSystem#1 from maciejbocianski/btt_demo

port to BT_01001_V0_2 - initial version

README.md

@@ -88,3 +88,19 @@ Press any key in 3 seconds to enter device configuration menu...
 You can then press any key on your keyboard to enter the configuration menu. After that you'll
 see a few configuration options that can be altered and persisted within the flash memory for
 future bootups.
+
+
+# Bulk Tainer Telematics demo
+
+## Running demo
+1. Change branche to `btt_demo`
+2. Setup workspace: `mbed deploy`
+3. Change your device `endpoint_name` in `mbed_app.json`
+4. Mock custom board: `mbedls --mock 0828:BT_01001_V0_2`
+5. If using mbed-os 5.X apply AT_Handler patch from https://github.com/Waleed-Elmughrabi/BTTM-IOT-NODE-Master
+6. Build&flash: `mbed compile -m BT_01001_V0_2 --profile debug --flash`
+7. Add device to Coiote Device Management
+    * Go to Device Inventory, click `+ Add device` button
+    * Than Connect your LwM2M device via via the Management server: set `endpoint_name` as `Device ID`, any `Friendly name`, and `Security mode` as `NoSec` than click `Add device`
+    * Flash device and wait until it get connected then move to next step
+8. You have connected device

TARGET_BT_01001_V0_2/PinNames.h

@@ -0,0 +1,317 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2018, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+#include "PinNamesTypes.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    ALT0  = 0x100,
+    ALT1  = 0x200,
+    ALT2  = 0x300,
+    ALT3  = 0x400
+} ALTx;
+
+typedef enum {
+    PA_0  = 0x00,
+    PA_0_ALT0 = PA_0 | ALT0,
+    PA_1  = 0x01,
+    PA_1_ALT0 = PA_1 | ALT0,
+    PA_1_ALT1 = PA_1 | ALT1,
+    PA_2  = 0x02,
+    PA_2_ALT0 = PA_2 | ALT0,
+    PA_2_ALT1 = PA_2 | ALT1,
+    PA_3  = 0x03,
+    PA_3_ALT0 = PA_3 | ALT0,
+    PA_3_ALT1 = PA_3 | ALT1,
+    PA_4  = 0x04,
+    PA_4_ALT0 = PA_4 | ALT0,
+    PA_5  = 0x05,
+    PA_5_ALT0 = PA_5 | ALT0,
+    PA_6  = 0x06,
+    PA_6_ALT0 = PA_6 | ALT0,
+    PA_7  = 0x07,
+    PA_7_ALT0 = PA_7 | ALT0,
+    PA_7_ALT1 = PA_7 | ALT1,
+    PA_7_ALT2 = PA_7 | ALT2,
+    PA_8  = 0x08,
+    PA_9  = 0x09,
+    PA_10 = 0x0A,
+    PA_11 = 0x0B,
+    PA_12 = 0x0C,
+    PA_13 = 0x0D,
+    PA_14 = 0x0E,
+    PA_15 = 0x0F,
+    PA_15_ALT0 = PA_15 | ALT0,
+
+    PB_0  = 0x10,
+    PB_0_ALT0 = PB_0 | ALT0,
+    PB_0_ALT1 = PB_0 | ALT1,
+    PB_1  = 0x11,
+    PB_1_ALT0 = PB_1 | ALT0,
+    PB_1_ALT1 = PB_1 | ALT1,
+    PB_2  = 0x12,
+    PB_3  = 0x13,
+    PB_3_ALT0 = PB_3 | ALT0,
+    PB_4  = 0x14,
+    PB_4_ALT0 = PB_4 | ALT0,
+    PB_5  = 0x15,
+    PB_5_ALT0 = PB_5 | ALT0,
+    PB_6  = 0x16,
+    PB_6_ALT0 = PB_6 | ALT0,
+    PB_7  = 0x17,
+    PB_7_ALT0 = PB_7 | ALT0,
+    PB_8  = 0x18,
+    PB_8_ALT0 = PB_8 | ALT0,
+    PB_9  = 0x19,
+    PB_9_ALT0 = PB_9 | ALT0,
+    PB_10 = 0x1A,
+    PB_10_ALT0 = PB_10 | ALT0,
+    PB_11 = 0x1B,
+    PB_11_ALT0 = PB_11 | ALT0,
+    PB_12 = 0x1C,
+    PB_13 = 0x1D,
+    PB_13_ALT0 = PB_13 | ALT0,
+    PB_14 = 0x1E,
+    PB_14_ALT0 = PB_14 | ALT0,
+    PB_14_ALT1 = PB_14 | ALT1,
+    PB_15 = 0x1F,
+    PB_15_ALT0 = PB_15 | ALT0,
+    PB_15_ALT1 = PB_15 | ALT1,
+
+    PC_0  = 0x20,
+    PC_0_ALT0 = PC_0 | ALT0,
+    PC_0_ALT1 = PC_0 | ALT1,
+    PC_1  = 0x21,
+    PC_1_ALT0 = PC_1 | ALT0,
+    PC_1_ALT1 = PC_1 | ALT1,
+    PC_2  = 0x22,
+    PC_2_ALT0 = PC_2 | ALT0,
+    PC_2_ALT1 = PC_2 | ALT1,
+    PC_3  = 0x23,
+    PC_3_ALT0 = PC_3 | ALT0,
+    PC_3_ALT1 = PC_3 | ALT1,
+    PC_4  = 0x24,
+    PC_4_ALT0 = PC_4 | ALT0,
+    PC_5  = 0x25,
+    PC_5_ALT0 = PC_5 | ALT0,
+    PC_6  = 0x26,
+    PC_6_ALT0 = PC_6 | ALT0,
+    PC_7  = 0x27,
+    PC_7_ALT0 = PC_7 | ALT0,
+    PC_8  = 0x28,
+    PC_8_ALT0 = PC_8 | ALT0,
+    PC_9  = 0x29,
+    PC_9_ALT0 = PC_9 | ALT0,
+    PC_10 = 0x2A,
+    PC_10_ALT0 = PC_10 | ALT0,
+    PC_11 = 0x2B,
+    PC_11_ALT0 = PC_11 | ALT0,
+    PC_12 = 0x2C,
+    PC_13 = 0x2D,
+    PC_14 = 0x2E,
+    PC_15 = 0x2F,
+
+    PD_0  = 0x30,
+    PD_1  = 0x31,
+    PD_2  = 0x32,
+    PD_3  = 0x33,
+    PD_4  = 0x34,
+    PD_5  = 0x35,
+    PD_6  = 0x36,
+    PD_7  = 0x37,
+    PD_8  = 0x38,
+    PD_9  = 0x39,
+    PD_10 = 0x3A,
+    PD_11 = 0x3B,
+    PD_12 = 0x3C,
+    PD_13 = 0x3D,
+    PD_14 = 0x3E,
+    PD_15 = 0x3F,
+
+    PE_0  = 0x40,
+    PE_1  = 0x41,
+    PE_2  = 0x42,
+    PE_3  = 0x43,
+    PE_4  = 0x44,
+    PE_5  = 0x45,
+    PE_6  = 0x46,
+    PE_7  = 0x47,
+    PE_8  = 0x48,
+    PE_9  = 0x49,
+    PE_10 = 0x4A,
+    PE_11 = 0x4B,
+    PE_12 = 0x4C,
+    PE_13 = 0x4D,
+    PE_14 = 0x4E,
+    PE_15 = 0x4F,
+
+    PF_0  = 0x50,
+    PF_1  = 0x51,
+    PF_2  = 0x52,
+    PF_3  = 0x53,
+    PF_4  = 0x54,
+    PF_5  = 0x55,
+    PF_6  = 0x56,
+    PF_7  = 0x57,
+    PF_8  = 0x58,
+    PF_9  = 0x59,
+    PF_9_ALT0 = PF_9 | ALT0,
+    PF_10 = 0x5A,
+    PF_11 = 0x5B,
+    PF_12 = 0x5C,
+    PF_13 = 0x5D,
+    PF_14 = 0x5E,
+    PF_15 = 0x5F,
+
+    PG_0  = 0x60,
+    PG_1  = 0x61,
+    PG_2  = 0x62,
+    PG_3  = 0x63,
+    PG_4  = 0x64,
+    PG_5  = 0x65,
+    PG_6  = 0x66,
+    PG_7  = 0x67,
+    PG_8  = 0x68,
+    PG_9  = 0x69,
+    PG_10 = 0x6A,
+    PG_11 = 0x6B,
+    PG_12 = 0x6C,
+    PG_13 = 0x6D,
+    PG_14 = 0x6E,
+    PG_15 = 0x6F,
+
+    PH_0  = 0x70,
+    PH_1  = 0x71,
+
+    // ADC internal channels
+    ADC_TEMP = 0xF0,
+    ADC_VREF = 0xF1,
+    ADC_VBAT = 0xF2,
+
+    // Arduino pin naming just because some libraries rely on them during compile
+    A0          = PA_0,
+    A1          = PA_1,
+    A2          = PA_2,
+    A3          = PA_3,
+    A4          = PA_4,
+    A5          = PA_5,
+    D0          = PA_6,
+    D1          = PA_7,
+    D2          = PA_8,
+    D3          = PA_9,
+    D4          = PA_10,
+    D5          = PA_11,
+    D6          = PA_12,
+    D7          = PA_13,
+    D8          = PA_14,
+    D9          = PA_15,
+    D10         = PB_0,
+    D11         = PB_1,
+    D12         = PB_2,
+    D13         = PB_3,
+    D14         = PB_4,
+    D15         = PB_5,
+
+    // STDIO for console print
+#ifdef MBED_CONF_TARGET_STDIO_UART_TX
+    STDIO_UART_TX = MBED_CONF_TARGET_STDIO_UART_TX,
+#else
+    STDIO_UART_TX = PC_1,
+#endif
+#ifdef MBED_CONF_TARGET_STDIO_UART_RX
+    STDIO_UART_RX = MBED_CONF_TARGET_STDIO_UART_RX,
+#else
+    STDIO_UART_RX = PC_0,
+#endif
+
+    // Generic signals namings
+    LED1        = PD_2,
+
+    SERIAL_TX   = STDIO_UART_TX, // Virtual Com Port
+    SERIAL_RX   = STDIO_UART_RX, // Virtual Com Port
+    USBTX       = STDIO_UART_TX, // Virtual Com Port
+    USBRX       = STDIO_UART_RX, // Virtual Com Port
+
+    /**** USB FS pins ****/
+    USB_OTG_FS_DM = PA_11,
+    USB_OTG_FS_DP = PA_12,
+    USB_OTG_FS_ID = PA_10,
+    USB_OTG_FS_NOE = PA_13,
+    USB_OTG_FS_NOE_ALT0 = PC_9,
+    USB_OTG_FS_SOF = PA_8,
+    USB_OTG_FS_SOF_ALT0 = PA_14,
+    USB_OTG_FS_VBUS = PA_9,
+
+    /**** OSCILLATOR pins ****/
+    RCC_OSC32_IN = PC_14,
+    RCC_OSC32_OUT = PC_15,
+    RCC_OSC_IN = PH_0,
+    RCC_OSC_OUT = PH_1,
+
+    /**** DEBUG pins ****/
+    SYS_JTCK_SWCLK = PA_14,
+    SYS_JTDI = PA_15,
+    SYS_JTDO_SWO = PB_3,
+    SYS_JTMS_SWDIO = PA_13,
+    SYS_JTRST = PB_4,
+    SYS_PVD_IN = PB_7,
+    SYS_TRACED0_ALT0 = PC_1,
+    SYS_TRACED1_ALT0 = PC_10,
+    SYS_TRACED2_ALT0 = PD_2,
+    SYS_TRACED3_ALT0 = PC_12,
+    SYS_WKUP1 = PA_0,
+    SYS_WKUP2 = PC_13,
+    SYS_WKUP4 = PA_2,
+    SYS_WKUP5 = PC_5,
+
+    /**** QSPI FLASH pins ****/
+    QSPI_FLASH1_IO0 = PB_1,
+    QSPI_FLASH1_IO1 = PB_0,
+    QSPI_FLASH1_IO2 = PA_7,
+    QSPI_FLASH1_IO3 = PA_6,
+    QSPI_FLASH1_SCK = PA_3,
+    QSPI_FLASH1_CSN = PB_11,
+
+    // Not connected
+    NC = (int)0xFFFFFFFF
+} PinName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

custom_targets.json

@@ -0,0 +1,43 @@
+{
+	"BT_01001_V0_1": {
+		"inherits": [
+			"NUCLEO_L496ZG"
+		],
+		"detect_code": [
+			"0313"
+		],
+		"macros_add": [
+			"BT_01001_V0_1"
+		]
+	},
+	"BT_01001_V0_2": {
+		"inherits": [
+			"NUCLEO_L496ZG"
+		],
+		"detect_code": [
+			"0313"
+		],
+		"macros_add": [
+			"BT_01001_V0_2"
+		],
+		"device_has_add": [
+			"QSPI"
+		],
+		"extra_labels_add": [
+			"MX25R6435F"
+		],
+		"components_add": [
+			"QSPIF",
+			"FLASHIAP"
+		],
+		"overrides": {
+			"clock_source": "USE_PLL_HSI"
+		},
+		"supported_toolchains": [
+			"ARM",
+			"uARM",
+			"IAR",
+			"GCC_ARM"
+		]
+	}
+}