Merge pull request #4 from cumal/feature/upgrade_v2.1.3

Upgrade with lts-2.1.2

.gitignore

@@ -0,0 +1,3 @@
+# Compiled binaries
+Marlin.ino.with_bootloader.mega.hex
+Marlin.ino.mega.hex

Marlin/Makefile

@@ -63,8 +63,8 @@ HARDWARE_MOTHERBOARD ?= 1020
 
 ifeq ($(OS),Windows_NT)
   # Windows
-  ARDUINO_INSTALL_DIR ?= ${HOME}/Arduino
-  ARDUINO_USER_DIR ?= ${HOME}/Arduino
+  ARDUINO_INSTALL_DIR ?= ${HOME}/AppData/Local/Arduino
+  ARDUINO_USER_DIR ?= ${HOME}/Documents/Arduino
 else
   UNAME_S := $(shell uname -s)
   ifeq ($(UNAME_S),Linux)
@@ -82,11 +82,11 @@ endif
 
 # Arduino source install directory, and version number
 # On most linuxes this will be /usr/share/arduino
-ARDUINO_INSTALL_DIR  ?= ${HOME}/Arduino
-ARDUINO_VERSION      ?= 106
+ARDUINO_INSTALL_DIR  ?= ${HOME}/AppData/Local/Arduino       # C:/Users/${USERNAME}/AppData/Local/Arduino
+ARDUINO_VERSION      ?= 10819
 
 # The installed Libraries are in the User folder
-ARDUINO_USER_DIR ?= ${HOME}/Arduino
+ARDUINO_USER_DIR ?= ${HOME}/Documents/Arduino
 
 # You can optionally set a path to the avr-gcc tools.
 # Requires a trailing slash. For example, /usr/local/avr-gcc/bin/
@@ -109,7 +109,7 @@ LIQUID_TWI2        ?= 0
 # This defines if Wire is needed
 WIRE               ?= 0
 
-# This defines if Tone is needed (i.e SPEAKER is defined in Configuration.h)
+# This defines if Tone is needed (i.e., SPEAKER is defined in Configuration.h)
 # Disabling this (and SPEAKER) saves approximately 350 bytes of memory.
 TONE               ?= 1
 
@@ -132,7 +132,7 @@ CC_MIN:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC_MINOR__ | cut -f3 -d\ )
 CC_PATCHLEVEL:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC_PATCHLEVEL__ | cut -f3 -d\ )
 CC_VER:=$(shell echo $$(( $(CC_MAJ) * 10000 + $(CC_MIN) * 100 + $(CC_PATCHLEVEL) )))
 ifeq ($(shell test $(CC_VER) -lt 40901 && echo 1),1)
-  @echo This version of GCC is likely broken. Enabling relocation workaround.
+  $(warning This GCC version $(CC_VER) is likely broken. Enabling relocation workaround.)
   RELOC_WORKAROUND = 1
 endif
 
@@ -307,133 +307,22 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1154)
 else ifeq ($(HARDWARE_MOTHERBOARD),1155)
 # Tenlog D3 Hero IDEX printer
 else ifeq ($(HARDWARE_MOTHERBOARD),1156)
-# Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Fan, Bed)
+# Tenlog D3,5,6 Pro IDEX printers
 else ifeq ($(HARDWARE_MOTHERBOARD),1157)
-# Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Hotend2, Bed)
+# Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Fan, Bed)
 else ifeq ($(HARDWARE_MOTHERBOARD),1158)
-# Ramps S 1.2 by Sakul.cz (Power outputs: Hotend, Fan0, Fan1, Bed)
+# Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Hotend2, Bed)
 else ifeq ($(HARDWARE_MOTHERBOARD),1159)
-# Longer LK1 PRO / Alfawise U20 Pro (PRO version)
+# Ramps S 1.2 by Sakul.cz (Power outputs: Hotend, Fan0, Fan1, Bed)
 else ifeq ($(HARDWARE_MOTHERBOARD),1160)
-# Longer LKx PRO / Alfawise Uxx Pro (PRO version)
+# Longer LK1 PRO / Alfawise U20 Pro (PRO version)
 else ifeq ($(HARDWARE_MOTHERBOARD),1161)
-
-
-# 3Drag Controller
-else ifeq ($(HARDWARE_MOTHERBOARD),1100)
-# Velleman K8200 Controller (derived from 3Drag Controller)
-else ifeq ($(HARDWARE_MOTHERBOARD),1101)
-# Velleman K8400 Controller (derived from 3Drag Controller)
-else ifeq ($(HARDWARE_MOTHERBOARD),1102)
-# Velleman K8600 Controller (Vertex Nano)
-else ifeq ($(HARDWARE_MOTHERBOARD),1103)
-# Velleman K8800 Controller (Vertex Delta)
-else ifeq ($(HARDWARE_MOTHERBOARD),1104)
-# 2PrintBeta BAM&DICE with STK drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1105)
-# 2PrintBeta BAM&DICE Due with STK drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1106)
-# MKS BASE v1.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1107)
-# MKS v1.4 with A4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1108)
-# MKS v1.5 with Allegro A4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1109)
-# MKS v1.6 with Allegro A4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1110)
-# MKS BASE 1.0 with Heroic HR4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1111)
-# MKS GEN v1.3 or 1.4
-else ifeq ($(HARDWARE_MOTHERBOARD),1112)
-# MKS GEN L
-else ifeq ($(HARDWARE_MOTHERBOARD),1113)
-# zrib V2.0 control board (Chinese RAMPS replica)
-else ifeq ($(HARDWARE_MOTHERBOARD),1114)
-# BigTreeTech or BIQU KFB2.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1115)
-# Felix 2.0+ Electronics Board (RAMPS like)
-else ifeq ($(HARDWARE_MOTHERBOARD),1116)
-# Invent-A-Part RigidBoard
-else ifeq ($(HARDWARE_MOTHERBOARD),1117)
-# Invent-A-Part RigidBoard V2
-else ifeq ($(HARDWARE_MOTHERBOARD),1118)
-# Sainsmart 2-in-1 board
-else ifeq ($(HARDWARE_MOTHERBOARD),1119)
-# Ultimaker
-else ifeq ($(HARDWARE_MOTHERBOARD),1120)
-# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
-else ifeq ($(HARDWARE_MOTHERBOARD),1121)
-  MCU              ?= atmega1280
-  PROG_MCU         ?= m1280
-
-# Azteeg X3
-else ifeq ($(HARDWARE_MOTHERBOARD),1122)
-# Azteeg X3 Pro
-else ifeq ($(HARDWARE_MOTHERBOARD),1123)
-# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
-else ifeq ($(HARDWARE_MOTHERBOARD),1124)
-# Rumba
-else ifeq ($(HARDWARE_MOTHERBOARD),1125)
-# Raise3D Rumba
-else ifeq ($(HARDWARE_MOTHERBOARD),1126)
-# Rapide Lite RL200 Rumba
-else ifeq ($(HARDWARE_MOTHERBOARD),1127)
-# Formbot T-Rex 2 Plus
-else ifeq ($(HARDWARE_MOTHERBOARD),1128)
-# Formbot T-Rex 3
-else ifeq ($(HARDWARE_MOTHERBOARD),1129)
-# Formbot Raptor
-else ifeq ($(HARDWARE_MOTHERBOARD),1130)
-# Formbot Raptor 2
-else ifeq ($(HARDWARE_MOTHERBOARD),1131)
-# bq ZUM Mega 3D
-else ifeq ($(HARDWARE_MOTHERBOARD),1132)
-# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
-else ifeq ($(HARDWARE_MOTHERBOARD),1133)
-# TriGorilla Anycubic version 1.3 based on RAMPS EFB
-else ifeq ($(HARDWARE_MOTHERBOARD),1134)
-# TriGorilla Anycubic version 1.4 based on RAMPS EFB
-else ifeq ($(HARDWARE_MOTHERBOARD),1135)
-# TriGorilla Anycubic version 1.4 Rev 1.1
-else ifeq ($(HARDWARE_MOTHERBOARD),1136)
-# Creality: Ender-4, CR-8
-else ifeq ($(HARDWARE_MOTHERBOARD),1137)
-# Creality: CR10S, CR20, CR-X
-else ifeq ($(HARDWARE_MOTHERBOARD),1138)
-# Dagoma F5
-else ifeq ($(HARDWARE_MOTHERBOARD),1139)
-# FYSETC F6 1.3
-else ifeq ($(HARDWARE_MOTHERBOARD),1140)
-# FYSETC F6 1.5
-else ifeq ($(HARDWARE_MOTHERBOARD),1141)
-# Duplicator i3 Plus
-else ifeq ($(HARDWARE_MOTHERBOARD),1142)
-# VORON
-else ifeq ($(HARDWARE_MOTHERBOARD),1143)
-# TRONXY V3 1.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1144)
-# Z-Bolt X Series
-else ifeq ($(HARDWARE_MOTHERBOARD),1145)
-# TT OSCAR
-else ifeq ($(HARDWARE_MOTHERBOARD),1146)
-# Overlord/Overlord Pro
-else ifeq ($(HARDWARE_MOTHERBOARD),1147)
-# ADIMLab Gantry v1
-else ifeq ($(HARDWARE_MOTHERBOARD),1148)
-# ADIMLab Gantry v2
-else ifeq ($(HARDWARE_MOTHERBOARD),1149)
-# BIQU Tango V1
-else ifeq ($(HARDWARE_MOTHERBOARD),1150)
-# MKS GEN L V2
-else ifeq ($(HARDWARE_MOTHERBOARD),1151)
-# MKS GEN L V2.1
-else ifeq ($(HARDWARE_MOTHERBOARD),1152)
-# Copymaster 3D
-else ifeq ($(HARDWARE_MOTHERBOARD),1153)
-# Ortur 4
-else ifeq ($(HARDWARE_MOTHERBOARD),1154)
-# Tenlog D3 Hero
-else ifeq ($(HARDWARE_MOTHERBOARD),1155)
+# Longer LKx PRO / Alfawise Uxx Pro (PRO version)
+else ifeq ($(HARDWARE_MOTHERBOARD),1162)
+# Zonestar zrib V5.3 (Chinese RAMPS replica)
+else ifeq ($(HARDWARE_MOTHERBOARD),1163)
+# Pxmalion Core I3
+else ifeq ($(HARDWARE_MOTHERBOARD),1164)
 
 #
 # RAMBo and derivatives
@@ -512,7 +401,7 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1324)
 else ifeq ($(HARDWARE_MOTHERBOARD),1325)
 # Intamsys 4.0 (Funmat HT)
 else ifeq ($(HARDWARE_MOTHERBOARD),1326)
-# Malyan M180 Mainboard Version 2 (no display function, direct gcode only)
+# Malyan M180 Mainboard Version 2 (no display function, direct G-code only)
 else ifeq ($(HARDWARE_MOTHERBOARD),1327)
 # Geeetech GT2560 Rev B for A20(M/T/D)
 else ifeq ($(HARDWARE_MOTHERBOARD),1328)
@@ -767,18 +656,18 @@ ifeq ($(HARDWARE_VARIANT), $(filter $(HARDWARE_VARIANT),arduino Teensy Sanguino)
   # Old libraries (avr-core 1.6.21 < / Arduino < 1.6.8)
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI
   # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/arduino/avr/1.8.6/libraries/SPI/src
 endif
 
 ifeq ($(IS_MCU),1)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/cores/arduino
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/arduino/avr/1.8.6/cores/arduino
 
   # Old libraries (avr-core 1.6.21 < / Arduino < 1.6.8)
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SoftwareSerial
   # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SoftwareSerial/src
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/arduino/avr/1.8.6/libraries/SPI/src
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/arduino/avr/1.8.6/libraries/SoftwareSerial/src
 endif
 
 VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidCrystal/src
@@ -792,17 +681,17 @@ ifeq ($(WIRE), 1)
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/utility
   # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/src
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/src/utility
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/avr/1.8.6/libraries/Wire/src
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/avr/1.8.6/libraries/Wire/src/utility
 endif
 ifeq ($(NEOPIXEL), 1)
 VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Adafruit_NeoPixel
 endif
 ifeq ($(U8GLIB), 1)
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib/csrc
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib/cppsrc
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib/fntsrc
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib-HAL
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib-HAL/src
+# VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib
+# VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib/src
 endif
 ifeq ($(TMC), 1)
 VPATH += $(ARDUINO_INSTALL_DIR)/libraries/TMCStepper/src
@@ -811,9 +700,9 @@ endif
 
 ifeq ($(HARDWARE_VARIANT), arduino)
   HARDWARE_SUB_VARIANT ?= mega
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/variants/$(HARDWARE_SUB_VARIANT)
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/avr/1.8.6/variants/$(HARDWARE_SUB_VARIANT)
 else ifeq ($(HARDWARE_VARIANT), Sanguino)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/marlin/avr/variants/sanguino
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/avr/1.8.6/variants/sanguino
 else ifeq ($(HARDWARE_VARIANT), archim)
   VPATH   += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/system/libsam
   VPATH   += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/system/CMSIS/CMSIS/Include/
@@ -829,7 +718,7 @@ else ifeq ($(HARDWARE_VARIANT), archim)
   LDLIBS   = $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/variants/archim/libsam_sam3x8e_gcc_rel.a
 else
   HARDWARE_SUB_VARIANT ?= standard
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/$(HARDWARE_VARIANT)/variants/$(HARDWARE_SUB_VARIANT)
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/avr/1.8.6/variants/$(HARDWARE_SUB_VARIANT)
 endif
 
 LIB_SRC = wiring.c \
@@ -844,7 +733,7 @@ endif
 
 ifeq ($(HARDWARE_VARIANT), Teensy)
   LIB_SRC = wiring.c
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/teensy/cores/teensy
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/teensy/cores/teensy
 endif
 
 LIB_CXXSRC = WMath.cpp WString.cpp Print.cpp SPI.cpp
@@ -991,7 +880,7 @@ AVRDUDE_WRITE_FLASH = -Uflash:w:$(BUILD_DIR)/$(TARGET).hex:i
 ifeq ($(shell uname -s), Linux)
   AVRDUDE_CONF = /etc/avrdude/avrdude.conf
 else
-  AVRDUDE_CONF = $(ARDUINO_INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf
+  AVRDUDE_CONF = $(ARDUINO_INSTALL_DIR)/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf
 endif
 AVRDUDE_FLAGS = -D -C$(AVRDUDE_CONF) \
   -p$(PROG_MCU) -P$(AVRDUDE_PORT) -c$(AVRDUDE_PROGRAMMER) \

Marlin/Marlin.ino

@@ -2,7 +2,7 @@
 
   Marlin Firmware
 
-  (c) 2011-2020 MarlinFirmware
+  (c) 2011-2024 MarlinFirmware
   Portions of Marlin are (c) by their respective authors.
   All code complies with GPLv2 and/or GPLv3
 
@@ -27,7 +27,7 @@ Configuration
   - https://github.com/MarlinFirmware/Configurations
     Example configurations for several printer models.
 
-  - https://www.youtube.com/watch?v=3gwWVFtdg-4
+  - https://youtu.be/3gwWVFtdg-4
     A good 20-minute overview of Marlin configuration by Tom Sanladerer.
     (Applies to Marlin 1.0.x, so Jerk and Acceleration should be halved.)
     Also... https://www.google.com/search?tbs=vid%3A1&q=configure+marlin

Marlin/Version.h

@@ -28,7 +28,7 @@
 /**
  * Marlin release version identifier
  */
-//#define SHORT_BUILD_VERSION "2.0.9.3"
+//#define SHORT_BUILD_VERSION "2.1.2.5"
 
 /**
  * Verbose version identifier which should contain a reference to the location
@@ -41,7 +41,14 @@
  * here we define this default string as the date where the latest release
  * version was tagged.
  */
-//#define STRING_DISTRIBUTION_DATE "2021-12-25"
+//#define STRING_DISTRIBUTION_DATE "2024-11-18"
+
+/**
+ * The protocol for communication to the host. Protocol indicates communication
+ * standards such as the use of ASCII, "echo:" and "error:" line prefixes, etc.
+ * (Other behaviors are given by the firmware version and capabilities report.)
+ */
+//#define PROTOCOL_VERSION "1.0"
 
 /**
  * Defines a generic printer name to be output to the LCD after booting Marlin.
@@ -54,7 +61,7 @@
  * has a distinct Github fork— the Source Code URL should just be the main
  * Marlin repository.
  */
-//#define SOURCE_CODE_URL "https://github.com/cumal/krotos3d"
+//#define SOURCE_CODE_URL "github.com/MarlinFirmware/Marlin"
 
 /**
  * Default generic printer UUID.
@@ -68,8 +75,8 @@
 //#define WEBSITE_URL "marlinfw.org"
 
 /**
- * Set the vendor info the serial USB interface, if changable
- * Currently only supported by DUE platform
+ * Set the vendor info the serial USB interface, if changeable.
+ * Currently only supported by DUE platform.
  */
 //#define USB_DEVICE_VENDOR_ID           0x0000
 //#define USB_DEVICE_PRODUCT_ID          0x0000