v0.2.24

Release 0.2.24

This release introduces one notable change:

• Fix a crash when trying to check the status of bootupd on a system booted with UEFI and with devices that do not have a partition table such as zram, CD/DVD and LUKS devices. (#740)

Additionally, this release provides various dependency updates.

Timothée Ravier (1):
      bios: Handle empty pttype from lsblk output

SHA-256 digests:

crate: 60ceb441b2911122891a891030f22de7c6c2d1604599e6ecb125b525da0aa889
vendor: ab981b6a4caaf7e6293318edb142106a0065a5edc690c3c508ca9f72551a213e

Full Changelog: v0.2.23...v0.2.24

v0.2.23

Release 0.2.23

This release introduces 1 notable change:

• The previous release0.2.22 includes a change: adopt-and-update for BIOS, that would break updates if booting the OS on a none hybrid partition layout. This release fixes the issue by adding conditions to check partition layout before doing the updates (#729).

Additionally, this release provides various dependency updates.

HuijingHei (2):
      Convert to `let-else` syntax
      Skip `UEFI` or `BIOS` on none hybrid partition layout

SHA-256 digests:

crate: 338f0b2ca033d4a7cc11e587ff3eaff0cf718fe5e2721ba643c8d385bb979ed6
vendor: d8557c42483b34e8120159551b0752495e34d7d263ed2518f4f59fced6d08dd8

Full Changelog: v0.2.22...v0.2.23

v0.2.22

Release 0.2.22

This release introduces two notable changes:

• If a bootupd command failed, it would leave the systemd service unit in a failed state and systemd would then refuse to run a unit under the same name with systemd-run again until the failure is cleared. We now systematically call systemctl reset-failed before calling systemd-run to clear any potential failures from previous calls. (#715)
• Implement adopt-and-update for BIOS. (#717)

Additionally, this release provides various dependency updates, and CI fixes.

Timothée Ravier (1):
      bootupctl: Clear failure status from previous runs

HuijingHei (2):
      spec: sync upstream to build all archs and drop i686
      bios.rs: add `adopt-and-update`

SHA-256 digests:

• crate: f4f05409f1aa321da8f4fc6e07d129eaa357e12bde7a8390e05f2f07737c12cd
• vendor: 9fb6540dc512f98d86f337d1f9f7263efb244c1a543d7122cc6da6f20efd1766

Full Changelog: v0.2.21...v0.2.22

v0.2.21

Release 0.2.21

This release introduces two notable changes:

• When updating the ESP, instead of applying the diff files one by one to the destination directory, it will create a temporary directory that is a copy of the existing one in the ESP, apply the diff to that temporary directory and finally do an atomic rename exchange of the two directories (#669).
• When crating an efi bootentry, the label will match the one that would be used by Anaconda (#685 and #686).

Additionally, this release provides various dependency updates, CI improvements, and documentation fixes.

HuijingHei (6):
      efi: sync bootentry label with Anaconda
      efi: avoid reading global state for `get_product_name()`
      Cargo.toml: bump MSRV to 1.75.0
      deps: bump clap from 3.2.25 to 4.5
      efi: update the ESP by creating a tmpdir and RENAME_EXCHANGE
      filetree: add failpoint when doing exchange

Full Changelog: v0.2.20…v0.2.21

v0.2.20

Release 0.2.20

This release introduces two notable changes:

• Drops the systemd service in favor of systemd-run (#663).
• The option --update-firmware will now match the current Anaconda behavior of removing all boot entries that match the product name and then creating a new boot entry (#665).

Additionally, this release provides various dependency updates, CI improvements, and documentation fixes.

Colin Walters (2):
      Port to rustix, drop nix
      ci: Add cross-arch builds

HuijingHei (6):
      ci: fix failed log
      Drop systemd service
      efi: change `--update-firmware` to match current Anaconda logic
      bootupd.spec: remove `%{_unitdir}`
      ci: minor updates - Remove fast track for `virtiofsd` as higher version is installed - Update `grub2` to newer version in ci testing
      Release 0.2.20

Timothée Ravier (2):
      github/workflows: Update to ubuntu-24.04 & podman
      README: Update now that it is no longer a daemon

Full Changelog: v0.2.19...v0.2.20

v0.2.19

What's Changed

Colin Walters (1):
      Print previous version too when updating

Dusty Mabe (1):
      grub2: source in a console.cfg file if exists

HuijingHei (5):
      deps-update: bump chrono from 0.4.34 to 0.4.35
      grubconfig: handle efi vendordir better
      aa64: Minor fix for efi vendordir
      Add `get_efi_vendor` method to both the bios and efi backends
      ci: add `bootc install to-disk` test in c9s-bootc-e2e

Joseph Marrero (1):
      Release 0.2.19

dependabot[bot] (17):
      build(deps): bump anyhow from 1.0.79 to 1.0.80
      build(deps): bump openssl from 0.10.63 to 0.10.64
      build(deps): bump serde from 1.0.196 to 1.0.197
      build(deps): bump serde_json from 1.0.113 to 1.0.114
      build(deps): bump tempfile from 3.9.0 to 3.10.1
      build(deps): bump log from 0.4.20 to 0.4.21
      build(deps): bump anyhow from 1.0.80 to 1.0.81
      build(deps): bump chrono from 0.4.35 to 0.4.37
      build(deps): bump serde_json from 1.0.114 to 1.0.115
      build(deps): bump widestring from 1.0.2 to 1.1.0
      build(deps): bump anyhow from 1.0.81 to 1.0.82
      build(deps): bump serde_json from 1.0.115 to 1.0.116
      build(deps): bump chrono from 0.4.37 to 0.4.38
      build(deps): bump serde from 1.0.197 to 1.0.198
      build(deps): bump serde from 1.0.198 to 1.0.199
      build(deps): bump libc from 0.2.153 to 0.2.154
      build(deps): bump serde from 1.0.199 to 1.0.200

Full Changelog: v0.2.18...v0.2.19

0.2.18

What's Changed

• build(deps): bump anyhow from 1.0.75 to 1.0.76 by @dependabot in #588
• build(deps): bump openssl from 0.10.61 to 0.10.62 by @dependabot in #589
• build(deps): bump serde_json from 1.0.108 to 1.0.109 by @dependabot in #593
• build(deps): bump anyhow from 1.0.76 to 1.0.78 by @dependabot in #592
• build(deps): bump tempfile from 3.8.1 to 3.9.0 by @dependabot in #591
• build(deps): bump serde from 1.0.193 to 1.0.195 by @dependabot in #594
• build(deps): bump libc from 0.2.151 to 0.2.152 by @dependabot in #598
• build(deps): bump serde_json from 1.0.109 to 1.0.111 by @dependabot in #597
• build(deps): bump anyhow from 1.0.78 to 1.0.79 by @dependabot in #596
• build(deps): bump openssl from 0.10.62 to 0.10.63 by @dependabot in #603
• build(deps): bump serde_json from 1.0.111 to 1.0.112 by @dependabot in #604
• build(deps): bump serde from 1.0.195 to 1.0.196 by @dependabot in #607
• ci: Add a workflow which does an install via bootc by @cgwalters in #608
• model: Add tracking of our own static config versions by @cgwalters in #609
• build(deps): bump libc from 0.2.152 to 0.2.153 by @dependabot in #612
• build(deps): bump serde_json from 1.0.112 to 1.0.113 by @dependabot in #611
• build(deps): bump chrono from 0.4.31 to 0.4.33 by @dependabot in #605
• build(deps): bump chrono from 0.4.33 to 0.4.34 by @dependabot in #615
• Release 0.2.18 by @cgwalters in #616

Full Changelog: v0.2.17...v0.2.18

0.2.17

What's Changed

• coreos: update aleph version handling by @dustymabe in #585
• Release 0.2.17 by @cgwalters in #587

Full Changelog: v0.2.16...v0.2.17

0.2.16

What's Changed

• two minor patches + c9s compat by @cgwalters in #579
• grubconfigs: move the GRUB2DIR creation earlier by @dustymabe in #583
• build(deps): bump openssl from 0.10.60 to 0.10.61 by @dependabot in #581
• build(deps): bump libc from 0.2.150 to 0.2.151 by @dependabot in #580
• Release 0.2.16 by @jmarrero in #584

New Contributors

• @dustymabe made their first contribution in #583
• @jmarrero made their first contribution in #584

Full Changelog: v0.2.15...v0.2.16

v0.2.15

What's Changed

• efi: Gracefully no-op if there's no BootCurrent by @cgwalters in #571
• build(deps): bump serde from 1.0.190 to 1.0.192 by @dependabot in #566
• ci: cancel previous build on PR update by @jlebon in #572
• build(deps): bump openssl from 0.10.59 to 0.10.60 by @dependabot in #575
• build(deps): bump serde from 1.0.192 to 1.0.193 by @dependabot in #574
• Release 0.2.15 by @cgwalters in #576

Full Changelog: v0.2.14...v0.2.15