Useful ESP8266/ESP8285 C Environment. Includes libraries and some basic functionality such as a Web-GUI, flashing firmware and changing the UI over network as well as basic GPIO functions.
You can use it as a template for your own ESP8266/ESP8285 projects. Just include it as sub-module in derivate projects.
NOTE: If you are starting from another environment or from the factory, you should execute make erase initdefault this will set the flash up in a way compatible with the newer ESP NONOS SDK 2.x's.
Contributors, please read the notes closely before you start (e.g. Branches and Include Binaries).
Make changes in the dev branch!
- esp82XX-basic (or the one in cnlohr's account (should be up to date) esp82XX-basic cnlohr
- Colorchord
- MAGFest Swag Badges 2017
- esp8266ws2812i2s
- espusb
- channel3 NTSC Broadcasting
- Minecraft on an ESP8266 via avrcraft
- Migration of others in progress
Most of this is written having a Debian-like Linux distribution in mind. You will need to use your imagination, if you want to build on other platforms. People have done it on OSX and Win 7/8. Look at open and closed issues and internet resources on the SDK such as the esp-forum to find help.
You will need the following:
- Espressif toolchain for the esp82xx-series chips
- Libusb 1.0 (
sudo apt-get install libusb-1.0-0-dev) - GNUMake
- GNU Compiler Collection and build essentials
- Possible more
- Install WSL 1 using these instructions: https://docs.microsoft.com/en-us/windows/wsl/install-win10
- Reboot.
- Install Ubuntu 20.04: https://www.microsoft.com/en-us/p/ubuntu-2004-lts/9n6svws3rx71?rtc=1
- Launch Ubuntu 20.04
- Install Python 2 and make separately
sudo apt update
sudo apt install python make
- Proceed with normal prerequisites and project.
sudo apt-get update
sudo apt-get install -y make gcc g++ gperf install-info gawk libexpat-dev python2-dev python2 python2-serial sed git unzip bash wget bzip2 libtool-bin
Note: Some platforms do not have python-serial, or any version of Python 2 for that matter (since it has reached its end of life on Jan 1, 2020 and all tooling and hosting is dropping support for it). If they don't have pip, but do still have python 2, do this:
curl https://github.com/pypa/get-pip/raw/5f38681f7f5872e4032860b54e9cc11cf0374932/get-pip.py --output get-pip.py
sudo python2 get-pip.py
pip install pyserial
Otherwise, you have to use a distribution that has Python 2 packaged, compile it and the missing dependencies yourself, from source, or wait until the tools used here are ported to Python 3.
This will install the SDK to ~/esp8266 - the default location for the ESP8266 SDK. This only works on 64-bit x86 systems, and has only been verified in Linux Mint and Ubuntu. Installation is about 18MB and requires about 90 MB of disk space.
mkdir -p ~/esp8266
cd ~/esp8266
wget https://github.com/cnlohr/esp82xx_bin_toolchain/raw/master/esp-open-sdk-x86_64-20200810.tar.xz
tar xJvf esp-open-sdk-x86_64-20200810.tar.xz
Several esp82xx projects use the offical Espressif nonos SDK instead of the bundled one here. You should probably install that to your home folder using the following commands:
cd ~/esp8266
git clone https://github.com/espressif/ESP8266_NONOS_SDK --recurse-submodules
Optional: Add your user to the dialout group:
sudo usermod -aG dialout cnlohr
Caveat: On Windows Subsystem for Linux, you will need to find your serial port. You will need to alter PORT= in user.cfg in the tool you are building.
See Appendix A and B for alternate options (if you are on non-64-bit x86 systems)
Some versions of the SDK are somewhat problematic, e.g. with SDK versions greater than 1.5.2, Espressif changed the IRAM management, so some projects began to hit size restrictions and would not compile. Also some SDKs use different initial data (the flash has to have some SDK-related settings stored that are not userspace and aren't flashed along with the firmware). For that reason, the Makefile is set up to use a customized version of the SDK and ships with proven initial data.
If your SDK is not installed to ~/esp8266/esp-open-sdk, then there are many ways to let Make know where your SDK is located.
You can edit DEFAULT_SDK in ./user.cfg to reflect your specific SDK path or even better define a shell variable.
The latter is done with
# Add this in ~/.bashrc or similar
export ESP_ROOT=/path/to/sdk/where/esp-open-sdk
in your .bashrc, .profile or whatever is used by your shell. This way, the change will be persistent, even if you start many new esp82xx projects.
You can also pass the location as an argument to make:
make all ESP_ROOT=/path/to/sdk/where/esp-open-sdk
Starting a new project based on esp82xx is pretty easy:
mkdir my_new_esp_project
cd my_new_esp_project
git clone --recursive https://github.com/cnlohr/esp82xx
cp esp82xx/Makefile.example Makefile
make project
Replace the last line by the line below, if you also want to initialize the folder as a new git repo and upload it to a remote location:
make gitproject GIT_ORIGIN=https://github.com/YOUR_USER/YOUR_NEW_REPO.git
Alternatively, you can add esp82xx as a submodule from your project as follows:
git add submodule https://github.com/cnlohr/esp82xx
cp esp82xx/Makefile.example Makefile
make project
After the above commands, provided you have specified the SDK, the basic file structure should be in place.
Most files will be symbolic links against files in ./esp82xx/.
Do not edit these files or anything in ./esp82xx/.
You should rather copy the files to the top-level directories and edit the copies where necessary.
I.e. if you want add a line of CSS that changes the font in the WebUI, copy ./esp82xx/web/page/intex.html to ./web/page/ overwriting the symbolic link.
Then make your edits.
Edit user.cfg in the top level to specify things like the location of the Espressif toolchain (see Requirements).
The file user.cfg specifies the most important configuration variables.
If you did everything correctly, flashing your esp should work. Just connect it to an USB to serial adapter that uses 3.3V (you will fry your ESP with voltages higher than 3.3 V) and place it in programming mode.
For the first run from a factory or unknown source of an ESP, you should run the following command to completely wipe it and give it new data:
make burnitall
Then you can run
make burn
make burnweb # programming mode here too
and your ESP is good to go.
It should create its own WiFi Access Point called ESPXXXX or similar, where XXXX is some arbitrary code.
From now on you can configure and burn new firmware/page data over the web interface in your browser (when connected to the esp's network or it is connected to yours).
There are make targets to burn firmware and page data as well:
make netburn IP=192.168.4.1 # default IP, change to whatever your ESP is set to
make netweb IP=192.168.4.1
To find out the IP, see below.
The ESP will print its connection info, including its current IP to the serial interface after reset/power-on.
You can connect to the ESP in your browser:
http://esp82xx.local
There is also a make-target called getips that scans for ESP modules and lists their IPs.
make getips is basically a port-scan, that uses external tools you might have to install and takes long (especially if no ESP is connected).
The default IP of the ESP, when it operates as it's own access point, is 192.168.4.1. When connected to an existing WiFi Network, it will ask your DHCP-Server for an IP. Most WiFi routers have an option in their Web-GUI to list all IPs, that their DHCP has given out. You could find out your ESP's IP this way.
For general troubleshooting hints, see esptools troubleshooting page. It is excellent!
Most features of the WebUI can be used over network by sending an ASCII string to the flashed ESP.
This way you can evoke a feature from a program, script or the shell (i.e. using nc a.k.a netcat).
The command string starts with a letter signifying the command or family of commands.
In case of a command family, the second letter usually defines the command.
After that comes the first argument.
Subsequent arguments after the first are usually followed by tab-characters.
Most commands will also send a response packet containing information or error codes.
The character(s) that specify the command(-family) are not case sensitive, i.e. E1234 and e1234 will be interpreted identically.
Here is an example to get a freshly flashed ESP to connect to a WiFi network named MyWiFi:
echo -ne "W1\tMyWiFi\t1234\ta1:b2:c3:d4:e5:f6\t1" | nc 192.168.4.1 7878 -u -w 1 | hexdump -C
The access point has the mac a1:b2:c3:d4:e5:f6 and password 1234.
The program hexdump is used to receive and display the ESP's answer.
The commands are:
| Family | Command | Description |
|---|---|---|
| B | Browse commands | |
| q | Probe | |
| s | Service name | |
| l | List IP, service, device name and description | |
| r | Response | |
| G | GPIO commands | |
| 0 | Turn pin with the same number as the first argument on | |
| 1 | Turn pin with the same number as the first argument off | |
| i | Make pin numbered same as the first argument an input | |
| f | Toggle pin number specified by the first argument | |
| g | Get status of pin numbered same as the first argument | |
| s | Get outputmask and rmask as base-ten numbers | |
| E | . | Echo command string with all arguments (for test purposes) |
| I | Get info | |
| b | Restart system | |
| s | Save CS-settings | |
| l | Load CS-settings 1 | |
| r | Load CS-settings 2 | |
| f | Start finding devices or return list of found devices | |
| n | Device name | |
| d | Device description | |
| . | General info: IP, device name, description, servie name, free heap | |
| W | Wifi commands | |
| 0 | Have the ESP an AP. Arguments: AP name, password, mac, channel | |
| 1 | Connect to existing network AP. Same arguments as above | |
| i | Get info on current Wifi settings | |
| x | Get RSSI (if applicable) and current IP | |
| s | Scan for WiFi stations | |
| r | Return results of scan | |
| F | Flashing commands | |
| e | Erase sector | |
| b | Erase block | |
| m | Execute flash rewriter | |
| w | Write given number of bytes to flash (binary) | |
| x | Write given number (second argument) of hexadecimal bytes (third argument) to position in (first argument) in flash | |
| r | Read a number of bytes (second argument) from a sector (first argument) flash | |
| C | ** Custom commands ** | |
| C | Respond with 'CC' | |
| E | Echo arguments to UART | |
| ... | Your commands could go here | |
A dot . stands for an omitted character, i.e. nothing.
It is not included in the command string.
For more information on these commands, please conuslt the source code.
The commands are implemented in ./esp82xx/fwsrc/commonservices.c.
You can add your own commands in ./user/custom_commands.c.
Most of endless resets are caused by one of the following:
- Power supply too weak (the esp can draw 300mA)
- Not enough decoupling capacitance (a combination of 100uF and 100nF work)
- Wonky connection (worn out, loose or dirty contacts
- Initial flash data faulty (see Specify SDK), in which case this might help:
make erase
make initdefault #init3v3
If you get weird data at the start of your serial communication with the esp, don't forsake! The boot ROM writes a log to the UART with the unusual timing of 74880 baud. It's normal.
This section should mostly concern developers and contributors to this project. We try to keep the generally interesting stuff on top.
You can create the file structure of a basic program by hand or based on another project, instead of running make project.
To do that first, check out a project that uses esp82xx
git clone --recursive https://github.com/con-f-use/esp82XX-basic
or create your own
git init project_name
cd project_name
git submodule add https://github.com/cnlohr/esp82xx.git
cp esp82xx/user.cfg.example user.cfg
cp esp82xx/Makefile.example Makefile
cp esp82xx/fwsrc/user . -a
mkdir -p web/page user
ln -s ../esp82xx/web/Makefile web/
# ... link or copy more files depending on how much you want to change ...
After that, you can push it a freshly created remote repository with the usual git commands:
git init .
git add .
git git remote add origin https://github.com/YOUR_USER/YOUR_NEW_REPO.git
git commit -m 'Initial commit'
git push
The basic Makefile for the firmware is ./esp82xx/main.mf.
Most things can be achieved by including it in your top-level Makefile and changing some make variables.
include esp82xx/main.mf
SRCS += more_sources.c # Add your project specific sources
If you make small incremental changes and/or experimental ones, push to the dev branch rather than to origin/master:
git push origin dev
You can merge or squash-merge them into master once they have been tested and enough changes accumulate.
# ... Make changes in dev ...
# ... test them and be sure they should go into master ...
git checkout master
git merge --squash dev
git commit
It might be good to create feature branches to develop individual features and merge them into dev.
Cope with submodule changes in top-level project:
-
You made changes in the submodule and want to push them:
cd esp82xx # is the submodules here # Make changes in esp82xx git commit -m 'Your Message' git push # pushes to the sumodule remoteMake sure you're in the 'dev' branch. You can check that with
git branch. If you're not, make sure togit checkout devfirst, BEFORE you make your changes. You can also usegit push origin devto push just the dev branch.When you're ready to push, first make sure 'master' is up to date with
git push origin dev:master. Then to push to master, usegit push origin dev:master -
Bump esp82xx version in the main project root folder:
cd esp82xx git pull cd .. git add esp82xx git commit -m 'Bumped submodule version' git push -
Make sure you are using the master branch of your submodules, when you're about to merge a dev version of top-level projects. I.e. just before you merge, checkout the master branch of submodules, so that when you merge, a Master-branch top-level projects uses the master-branch of all its submodules and not subodule dev-braches.
-
You can clone the dev-branch directly:
git clone --recursive -b dev https://github.com/cnlohr/esp82xx.git && cd esp82xxIf you forgot and switched to
devviagit checkout dev, you might not have the proper submodules. In that case rungit submodule update --init
You should not include binaries in the project repository itself.
There is a make target that builds the binaries and creates a .zip file. Included that in the release.
To make a release, just tag a commit with git tag -a 'v1.3.3.7' -m 'Your release caption' and push the tag with git push --tags.
After that, the github web-interface will allow you to make a release out of the new tag and include the binary file.
To make the zip file invoke make projectname-version-binaries.tgz (Tab-autocompletion is your friend).
- Include libraries for usb, ws2812s and ethernet
- Expand the "Requirements" section
If you see something like this:
rf_cal[0] !=0x05,is 0xE9
ets Jan 8 2013,rst cause:2, boot mode:(3,6)
load 0x40100000, len 25936, room 16
tail 0
chksum 0x20
load 0x3ffe8000, len 1272, room 8
tail 0
chksum 0x9b
load 0x3ffe8500, len 1212, room 8
tail 4
chksum 0x8c
csum 0x8c
You may not be loading your parititon tables properly. #1 check user.cfg to make sure you have your partition burning location set correctly.
Additionally, make sure you are loading the partition tables in your user_main.
void user_pre_init(void)
{
//You must load the partition table so the NONOS SDK can find stuff.
LoadDefaultPartitionMap();
}
We recommend the excellent esp-open-sdk by @pfalcon. It downloads and installs the Espressif toolchain. Here is a shell script to download and build a version known to work. You should read and understand the script, before running it. It will take some time and GBs of disk space to build the toolchain.
Prerequisites (Debian, Mint, Ubuntu):
sudo apt-get update
sudo apt-get install -y make unrar autoconf automake libtool gcc g++ gperf flex bison texinfo-doc-nonfree install-info info texinfo gawk ncurses-dev libexpat-dev python-dev python python-serial sed git unzip bash help2man wget bzip2 libtool-bin
esptool:
cd ~/esp8366
git clone --recursive https://github.com/igrr/esptool-ck.git || exit 1
cd esptool-ck
make
cd ..
pfalcon's SDK:
cd ~/esp8266
git clone --recursive https://github.com/pfalcon/esp-open-sdk.git
cd esp-open-sdk
# For legacy projects, you will need SDK 1.5.2, from before espressif filled the iram
#sed -i 's/^\(\s*VENDOR_SDK\s*=\s*\).*$/\1 1.5.2/' Makefile
#git checkout e32ff685 # Old version of sdk (v1.5.2) before espressif filled the iram
make STANDALONE=y
find . -name "c_types.h" -exec cp "{}" "{}.patched" \;
# Line below fixes a bug, when e32ff685 or other old versions are used
#find -type f -name 'c_types.h.orig' -print0 | while read -d $'\0' f; do cp "$f" "${f%.orig}"; done
You may want to manually add the SDK path to your bashrc. Copy out the note from makefile and paste it into your .bashrc.
nano ~/.bashrc
