build(deps): bump urllib3 from 2.0.7 to 2.2.2 in /drivers/gpu/drm/ci/xfails #8
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
![dependabot[bot]](https://avatars.githubusercontent.com/in/29110?s=60&v=4){kind=small}
After the reworking of "Parallel CPU bringup", the cmdline "nosmp" and "maxcpus=0" is broken. Because these parameters make setup_max_cpus be zero, and setup_max_cpus is the "max_cpus" of bringup_nonboot_cpus(). In this case, "if (!--ncpus)" will not be true in cpuhp_bringup_mask(), and the result is all the possible cpus are brought up. We can fix it by changing "if (!--ncpus)" to "if (!ncpus--)". But to make logic more clear and save some cpu cycles, it is better to check "max_cpus" in bringup_nonboot_cpus(), return early if it is zero. Cc: [email protected] Fixes: 18415f3 ("cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE") Fixes: 06c6796 ("cpu/hotplug: Fix off by one in cpuhp_bringup_mask()") Signed-off-by: Huacai Chen <[email protected]>
Commit 343f4c4 ("kthread: Don't allocate kthread_struct for init and umh") introduces a new function user_mode_thread() for init and umh. init and umh are different from typical kernel threads since the don't need a "kthread" struct and they will finally become user processes by calling kernel_execve(), but on the other hand, they are also different from typical user mode threads (they have no "mm" structs at creation time, which is traditionally used to distinguish a user thread and a kernel thread). So I think it is reasonable to treat init and umh as "special kernel threads". Then let's unify the kernel_thread() and user_mode_thread() to kernel_thread() again, and add a new 'user' parameter for init and umh. This also makes code simpler. Signed-off-by: Huacai Chen <[email protected]>
…rqs() Adjust the return value semanteme of msi_domain_prepare_irqs(), which allows us to modify the input nvec by overriding the msi_domain_ops:: msi_prepare(). This is necessary for the later patch. Before: 0 on success, others on error. After: = 0: Success; > 0: The modified nvec; < 0: Error code. Callers are also updated. Signed-off-by: Huacai Chen <[email protected]>
Loongson machines can have as many as 256 logical cpus, but the maximum of msi vectors in one irqchip is also 256 (practically that is less than 256, because pch-pic consumes some of them). Even on a 64-core machine, 256 irqs can be easily exhausted if there are several NICs (NICs usually allocate msi irqs depending on the number of online cpus). So we want to limit the msi allocation. In this patch we add a machanism to limit msi allocation: 1, Modify input "nvec" by overriding the msi_domain_ops::msi_prepare(); 2, The default limit is 256, which is compatible with the old behavior; 3, Add a cmdline parameter "loongson_msi_limit=xxx" to control the limit. Signed-off-by: Juxin Gao <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
In the liointc hardware, there are different ISRs for different cores. We always use core#0's ISR before but has no problem, it is because the interrupts are routed to core#0 by default. If we change the routing, we should set correct ISRs for different cores. Cc: <[email protected]> Signed-off-by: Tianli Xiong <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
…ode() When we use "nr_cpus=n" to hard limit the CPU number, cpu_to_node() is not usable because it can only applied on "possible" CPUs. On the other hand, early_cpu_to_node() can be always used instead. Signed-off-by: Huacai Chen <[email protected]>
On multiple bridge platform, a MSIX vector is often affinitive with only one cpu, and the count of MSIX is determined as the count of cpus in the system. Unfortunately, the cpu group related to a brigde is only allowed to handle interrupts from devices behind the bridge, which breaks the normal affinity setting for multiple MSIX vectors, and causing following affinity setting: IRQ: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 CPU: 0, 1, 2, 3, 4, 0, 0, 0, 0, 0 To balance the affinity, we improve the setting to assign cpu for IRQ as following: IRQ: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 CPU: 0, 1, 2, 3, 4, 0, 1, 2, 3, 4 Signed-off-by: Jianmin Lv <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
When the best selected CPU is offline, work_on_cpu() will stuck forever. This can be happen if a node is online while all its CPUs are offline (we can use "maxcpus=1" without "nr_cpus=1" to reproduce it), Therefore, in this case, we should call local_pci_probe() instead of work_on_cpu(). Cc: <[email protected]> Signed-off-by: Huacai Chen <[email protected]> Signed-off-by: Hongchen Zhang <[email protected]>
LS7A chipset can be used as a downstream bridge which connected to a high-level host bridge. In this case DEV_LS7A_PCIE_PORT5 is used as the upward port. We should always enable MSI caps of this port, otherwise downstream devices cannot use MSI. Cc: <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
Chromium sandbox apparently wants to deny statx [1] so it could properly inspect arguments after the sandboxed process later falls back to fstat. Because there's currently not a "fd-only" version of statx, so that the sandbox has no way to ensure the path argument is empty without being able to peek into the sandboxed process's memory. For architectures able to do newfstatat though, glibc falls back to newfstatat after getting -ENOSYS for statx, then the respective SIGSYS handler [2] takes care of inspecting the path argument, transforming allowed newfstatat's into fstat instead which is allowed and has the same type of return value. But, as LoongArch is the first architecture to not have fstat nor newfstatat, the LoongArch glibc does not attempt falling back at all when it gets -ENOSYS for statx -- and you see the problem there! Actually, back when the LoongArch port was under review, people were aware of the same problem with sandboxing clone3 [3], so clone was eventually kept. Unfortunately it seemed at that time no one had noticed statx, so besides restoring fstat/newfstatat to LoongArch uapi (and postponing the problem further), it seems inevitable that we would need to tackle seccomp deep argument inspection. However, this is obviously a decision that shouldn't be taken lightly, so we just restore fstat/newfstatat by defining __ARCH_WANT_NEW_STAT in unistd.h. This is the simplest solution for now, and so we hope the community will tackle the long-standing problem of seccomp deep argument inspection in the future [4][5]. More infomation please reading this thread [6]. [1] https://chromium-review.googlesource.com/c/chromium/src/+/2823150 [2] https://chromium.googlesource.com/chromium/src/sandbox/+/c085b51940bd/linux/seccomp-bpf-helpers/sigsys_handlers.cc#355 [3] https://lore.kernel.org/linux-arch/[email protected]/ [4] https://lwn.net/Articles/799557/ [5] https://lpc.events/event/4/contributions/560/attachments/397/640/deep-arg-inspection.pdf [6] https://lore.kernel.org/loongarch/20240226-granit-seilschaft-eccc2433014d@brauner/T/#t Cc: [email protected] Signed-off-by: Huacai Chen <[email protected]>
Some drivers want to use cpu_logical_map(), early_cpu_to_node() and some other CPU mapping APIs, even if we use "nr_cpus=1" to hard limit the CPU number. This is strongly required for the multi-bridges machines. Currently, we stop parsing the MADT if the nr_cpus limit is reached, but to achieve the above goal we should always enumerate the MADT table and setup logical-physical CPU mapping whether there is a nr_cpus limit. Rework the MADT enumeration: 1. Define a flag "cpu_enumerated" to distinguish the first enumeration (cpu_enumerated=0) and the physical hotplug case (cpu_enumerated=1) for set_processor_mask(). 2. If cpu_enumerated=0, stop parsing only when NR_CPUS limit is reached, so we can setup logical-physical CPU mapping; if cpu_enumerated=1, stop parsing when nr_cpu_ids limit is reached, so we can avoid some runtime bugs. Once logical-physical CPU mapping is setup, we will let cpu_enumerated=1. 3. Use find_first_zero_bit() instead of cpumask_next_zero() to find the next zero bit (free logical CPU id) in the cpu_present_mask, because cpumask_next_zero() will stop at nr_cpu_ids. 4. Only touch cpu_possible_mask if cpu_enumerated=0, this is in order to avoid some potential crashes, because cpu_possible_mask is marked as __ro_after_init. 5. In prefill_possible_map(), clear cpu_present_mask bits greater than nr_cpu_ids, in order to avoid a CPU be "present" but not "possible". Signed-off-by: Huacai Chen <[email protected]>
Add irq_work support for LoongArch via self IPIs. This make it possible to run works in hardware interrupt context, which is a prerequisite for NOHZ_FULL. Implement: - arch_irq_work_raise() - arch_irq_work_has_interrupt() Reviewed-by: Guo Ren <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
Currently, only TLB-based ioremap() support writecombine, so add the counterpart for DMW-based ioremap() with help of DMW2. The base address (WRITECOMBINE_BASE) is configured as 0xa000000000000000. DMW3 is unused by kernel now, however firmware may leave garbage in them and interfere kernel's address mapping. So clear it as necessary. BTW, centralize the DMW configuration to macro SETUP_DMWINS. Signed-off-by: Jiaxun Yang <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
Most LoongArch 64 machines are using custom "SADR" ACPI extension to perform ACPI S3 sleep. However the standard ACPI way to perform sleep is to write a value to ACPI PM1/SLEEP_CTL register, and this is never supported properly in kernel. Add standard S3 sleep by providing a default DoSuspend function which calls ACPI's acpi_enter_sleep_state() routine when SADR is not provided by the firmware. Also fix suspend assembly code so that ra is set properly before go into sleep routine. (Previously linked address of jirl was set to a0, some firmware do require return address in a0 but it's already set with la.pcrel before). Signed-off-by: Jiaxun Yang <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
Signed-off-by: Binbin Zhou <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
This add CPU HWMon (temperature sensor) platform driver for Loongson-3. Tested-by: Xi Ruoyao <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
When CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS is selected, cpu_max_bits_warn() generates a runtime warning similar as below while we show /proc/cpuinfo. Fix this by using nr_cpu_ids (the runtime limit) instead of NR_CPUS to iterate CPUs. [ 3.052463] ------------[ cut here ]------------ [ 3.059679] WARNING: CPU: 3 PID: 1 at include/linux/cpumask.h:108 show_cpuinfo+0x5e8/0x5f0 [ 3.070072] Modules linked in: efivarfs autofs4 [ 3.076257] CPU: 0 PID: 1 Comm: systemd Not tainted 5.19-rc5+ #1052 [ 3.099465] Stack : 9000000100157b08 9000000000f18530 9000000000cf846c 9000000100154000 [ 3.109127] 9000000100157a50 0000000000000000 9000000100157a58 9000000000ef7430 [ 3.118774] 90000001001578e8 0000000000000040 0000000000000020 ffffffffffffffff [ 3.128412] 0000000000aaaaaa 1ab25f00eec96a37 900000010021de80 900000000101c890 [ 3.138056] 0000000000000000 0000000000000000 0000000000000000 0000000000aaaaaa [ 3.147711] ffff8000339dc220 0000000000000001 0000000006ab4000 0000000000000000 [ 3.157364] 900000000101c998 0000000000000004 9000000000ef7430 0000000000000000 [ 3.167012] 0000000000000009 000000000000006c 0000000000000000 0000000000000000 [ 3.176641] 9000000000d3de08 9000000001639390 90000000002086d8 00007ffff0080286 [ 3.186260] 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c [ 3.195868] ... [ 3.199917] Call Trace: [ 3.203941] [<90000000002086d8>] show_stack+0x38/0x14c [ 3.210666] [<9000000000cf846c>] dump_stack_lvl+0x60/0x88 [ 3.217625] [<900000000023d268>] __warn+0xd0/0x100 [ 3.223958] [<9000000000cf3c90>] warn_slowpath_fmt+0x7c/0xcc [ 3.231150] [<9000000000210220>] show_cpuinfo+0x5e8/0x5f0 [ 3.238080] [<90000000004f578c>] seq_read_iter+0x354/0x4b4 [ 3.245098] [<90000000004c2e90>] new_sync_read+0x17c/0x1c4 [ 3.252114] [<90000000004c5174>] vfs_read+0x138/0x1d0 [ 3.258694] [<90000000004c55f8>] ksys_read+0x70/0x100 [ 3.265265] [<9000000000cfde9c>] do_syscall+0x7c/0x94 [ 3.271820] [<9000000000202fe4>] handle_syscall+0xc4/0x160 [ 3.281824] ---[ end trace 8b484262b4b8c24c ]--- Cc: [email protected] Signed-off-by: Huacai Chen <[email protected]>
If an NTFS file system is mounted to another system with different
PAGE_SIZE from the original system, log->page_size will change in
log_replay(), but log->page_{mask,bits} don't change correspondingly.
This will cause a panic because "u32 bytes = log->page_size - page_off"
will get a negative value in the later read_log_page().
Cc: [email protected]
Fixes: b46acd6 ("fs/ntfs3: Add NTFS journal")
Signed-off-by: Huacai Chen <[email protected]>
The label end_reply is obviously a typo. It should be "replay" in this context. So rename end_reply to end_replay. Cc: [email protected] Fixes: b46acd6 ("fs/ntfs3: Add NTFS journal") Signed-off-by: Huacai Chen <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
Debug machanism include: gdb, ftrace, kprobe, uprobe and jump_label Signed-off-by: Huacai Chen <[email protected]>
Add driver support for the IOMMU in LS7A. If you need to enable it, please add the loongson_iommu=on kernel parameter. Signed-off-by: Huacai Chen <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
Consider a configuration like this: 1, efifb (or simpledrm) is built-in; 2, a native display driver (such as radeon) is also built-in. As Javier said, this is not a common configuration (the native display driver is usually built as a module), but it can happen and cause some trouble. In this case, since efifb, radeon and sysfb are all in device_initcall() level, the order in practise is like this: efifb registered at first, but no "efi-framebuffer" device yet. radeon registered later, and /dev/fb0 created. sysfb_init() comes at last, it registers "efi-framebuffer" and then causes an error message "efifb: a framebuffer is already registered". Make sysfb_init() to be subsys_ initcall_sync() can avoid this. And Javier Martinez Canillas is trying to make a more general solution in commit 873eb3b ("fbdev: Disable sysfb device registration when removing conflicting FBs"). However, this patch still makes sense because it can make the screen display as early as possible (We cannot move to subsys_initcall, since sysfb_init() should be executed after PCI enumeration). This is a better version of commit 60aebc9 ("drivers/firmware: Move sysfb_init() from device_initcall to subsys_initcall_sync") since the previous commit leads to blank displays on some systems. The reason is that vgaarb initialization is also a subsys_initcall_sync function so sysfb_disable() is sometimes missed. So here we move sysfb_init() to an fs_initcall function which is ensured after vgaarb initialization. Signed-off-by: Huacai Chen <[email protected]>
After commit 60aebc9 ("drivers/firmware: Move sysfb_init() from device_initcall to subsys_initcall_sync") some Lenovo laptops get a blank screen until the display manager starts. This regression occurs with such a Kconfig combination: CONFIG_SYSFB=y CONFIG_SYSFB_SIMPLEFB=y CONFIG_DRM_SIMPLEDRM=y CONFIG_DRM_I915=y # Or other native drivers such as radeon, amdgpu If replace CONFIG_DRM_SIMPLEDRM with CONFIG_FB_SIMPLE (they use the same device), there is no blank screen. The root cause is the initialization order, and this order depends on the Makefile. FB_SIMPLE is before native DRM drivers (e.g. i915, radeon, amdgpu, and so on), but DRM_SIMPLEDRM is after them. Thus, if we use FB_SIMPLE, I915 will takeover FB_SIMPLE, then no problem; and if we use DRM_SIMPLEDRM, DRM_SIMPLEDRM will try to takeover I915, but fails to work. So we can move the "tiny" directory before native DRM drivers to solve this problem. Fixes: 60aebc9 ("drivers/firmware: Move sysfb_init() from device_initcall to subsys_initcall_sync") Closes: https://lore.kernel.org/dri-devel/[email protected]/T/#t Reported-by: Jaak Ristioja <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
Radeon driver can not handle the interrupt is faster than DMA data, so irq handler must update an old ih.rptr value in IH_RB_RPTR register to enable interrupt again when interrupt is faster than DMA data. Signed-off-by: Huacai Chen <[email protected]> Signed-off-by: Zhijie Zhang <[email protected]>
Commit fb24ea5 ("drivers: Remove explicit invocations of mmiowb()") remove all mmiowb() in drivers, but it says: "NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may regress any drivers incorrectly relying on mmiowb() to order MMIO writes between CPUs using lock-free synchronisation." The mmio in radeon_ring_commit() is protected by a mutex rather than a spinlock, but in the mutex fastpath it behaves similar to spinlock and need a mmiowb() to make sure the wptr is up-to-date for hardware. Without this, we get such an error when run 'glxgears' on weak ordering architectures such as LoongArch: radeon 0000:04:00.0: ring 0 stalled for more than 10324msec radeon 0000:04:00.0: ring 3 stalled for more than 10240msec radeon 0000:04:00.0: GPU lockup (current fence id 0x000000000001f412 last fence id 0x000000000001f414 on ring 3) radeon 0000:04:00.0: GPU lockup (current fence id 0x000000000000f940 last fence id 0x000000000000f941 on ring 0) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) Signed-off-by: Tianyang Zhang <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
Expose module parameters so that we can use them in specific device configurations. Add the 'stmmac_' prefix for them to avoid conflicts. Meanwhile, there was a 'buf_sz' local variable in stmmac_rx() with the same name as the global variable, and now we can distinguish them. Signed-off-by: Feiyang Chen <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
Current dwmac-loongson only support LS2K in the "probed with PCI and configured with DT" manner. We add LS7A support on which the devices are fully PCI (non-DT). Signed-off-by: Huacai Chen <[email protected]> Signed-off-by: Feiyang Chen <[email protected]>
Signed-off-by: Haiyong Sun <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
chenhuacai
pushed a commit
that referenced
this pull request
Sep 5, 2024
A sysfs reader can race with a device reset or removal, attempting to
read device state when the device is not actually present. eg:
[exception RIP: qed_get_current_link+17]
#8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede]
#9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3
#10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4
#11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300
#12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c
#13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b
#14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3
#15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1
#16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f
#17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb
crash> struct net_device.state ffff9a9d21336000
state = 5,
state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100).
The device is not present, note lack of __LINK_STATE_PRESENT (0b10).
This is the same sort of panic as observed in commit 4224cfd
("net-sysfs: add check for netdevice being present to speed_show").
There are many other callers of __ethtool_get_link_ksettings() which
don't have a device presence check.
Move this check into ethtool to protect all callers.
Fixes: d519e17 ("net: export device speed and duplex via sysfs")
Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show")
Signed-off-by: Jamie Bainbridge <[email protected]>
Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com
Signed-off-by: Jakub Kicinski <[email protected]>
chenhuacai
force-pushed
the
master
branch
2 times, most recently
from
a4d5422
to
18f04c1
Compare
chenhuacai
force-pushed
the
master
branch
4 times, most recently
from
0a6cfd3
to
67c2ab3
Compare
chenhuacai
force-pushed
the
master
branch
3 times, most recently
from
becf058
to
11c95f8
Compare
chenhuacai
force-pushed
the
master
branch
2 times, most recently
from
8efc749
to
3c8ac23
Compare
chenhuacai
pushed a commit
that referenced
this pull request
Sep 29, 2024
Use a dedicated mutex to guard kvm_usage_count to fix a potential deadlock on x86 due to a chain of locks and SRCU synchronizations. Translating the below lockdep splat, CPU1 #6 will wait on CPU0 #1, CPU0 #8 will wait on CPU2 #3, and CPU2 #7 will wait on CPU1 #4 (if there's a writer, due to the fairness of r/w semaphores). CPU0 CPU1 CPU2 1 lock(&kvm->slots_lock); 2 lock(&vcpu->mutex); 3 lock(&kvm->srcu); 4 lock(cpu_hotplug_lock); 5 lock(kvm_lock); 6 lock(&kvm->slots_lock); 7 lock(cpu_hotplug_lock); 8 sync(&kvm->srcu); Note, there are likely more potential deadlocks in KVM x86, e.g. the same pattern of taking cpu_hotplug_lock outside of kvm_lock likely exists with __kvmclock_cpufreq_notifier(): cpuhp_cpufreq_online() | -> cpufreq_online() | -> cpufreq_gov_performance_limits() | -> __cpufreq_driver_target() | -> __target_index() | -> cpufreq_freq_transition_begin() | -> cpufreq_notify_transition() | -> ... __kvmclock_cpufreq_notifier() But, actually triggering such deadlocks is beyond rare due to the combination of dependencies and timings involved. E.g. the cpufreq notifier is only used on older CPUs without a constant TSC, mucking with the NX hugepage mitigation while VMs are running is very uncommon, and doing so while also onlining/offlining a CPU (necessary to generate contention on cpu_hotplug_lock) would be even more unusual. The most robust solution to the general cpu_hotplug_lock issue is likely to switch vm_list to be an RCU-protected list, e.g. so that x86's cpufreq notifier doesn't to take kvm_lock. For now, settle for fixing the most blatant deadlock, as switching to an RCU-protected list is a much more involved change, but add a comment in locking.rst to call out that care needs to be taken when walking holding kvm_lock and walking vm_list. ====================================================== WARNING: possible circular locking dependency detected 6.10.0-smp--c257535a0c9d-pip #330 Tainted: G S O ------------------------------------------------------ tee/35048 is trying to acquire lock: ff6a80eced71e0a8 (&kvm->slots_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x179/0x1e0 [kvm] but task is already holding lock: ffffffffc07abb08 (kvm_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x14a/0x1e0 [kvm] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (kvm_lock){+.+.}-{3:3}: __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 kvm_dev_ioctl+0x4fb/0xe50 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #2 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x2e/0xb0 static_key_slow_inc+0x16/0x30 kvm_lapic_set_base+0x6a/0x1c0 [kvm] kvm_set_apic_base+0x8f/0xe0 [kvm] kvm_set_msr_common+0x9ae/0xf80 [kvm] vmx_set_msr+0xa54/0xbe0 [kvm_intel] __kvm_set_msr+0xb6/0x1a0 [kvm] kvm_arch_vcpu_ioctl+0xeca/0x10c0 [kvm] kvm_vcpu_ioctl+0x485/0x5b0 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&kvm->srcu){.+.+}-{0:0}: __synchronize_srcu+0x44/0x1a0 synchronize_srcu_expedited+0x21/0x30 kvm_swap_active_memslots+0x110/0x1c0 [kvm] kvm_set_memslot+0x360/0x620 [kvm] __kvm_set_memory_region+0x27b/0x300 [kvm] kvm_vm_ioctl_set_memory_region+0x43/0x60 [kvm] kvm_vm_ioctl+0x295/0x650 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&kvm->slots_lock){+.+.}-{3:3}: __lock_acquire+0x15ef/0x2e30 lock_acquire+0xe0/0x260 __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 set_nx_huge_pages+0x179/0x1e0 [kvm] param_attr_store+0x93/0x100 module_attr_store+0x22/0x40 sysfs_kf_write+0x81/0xb0 kernfs_fop_write_iter+0x133/0x1d0 vfs_write+0x28d/0x380 ksys_write+0x70/0xe0 __x64_sys_write+0x1f/0x30 x64_sys_call+0x281b/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e Cc: Chao Gao <[email protected]> Fixes: 0bf5049 ("KVM: Drop kvm_count_lock and instead protect kvm_usage_count with kvm_lock") Cc: [email protected] Reviewed-by: Kai Huang <[email protected]> Acked-by: Kai Huang <[email protected]> Tested-by: Farrah Chen <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Message-ID: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
chenhuacai
pushed a commit
that referenced
this pull request
Oct 13, 2024
On the node of an NFS client, some files saved in the mountpoint of the NFS server were copied to another location of the same NFS server. Accidentally, the nfs42_complete_copies() got a NULL-pointer dereference crash with the following syslog: [232064.838881] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116 [232064.839360] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116 [232066.588183] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058 [232066.588586] Mem abort info: [232066.588701] ESR = 0x0000000096000007 [232066.588862] EC = 0x25: DABT (current EL), IL = 32 bits [232066.589084] SET = 0, FnV = 0 [232066.589216] EA = 0, S1PTW = 0 [232066.589340] FSC = 0x07: level 3 translation fault [232066.589559] Data abort info: [232066.589683] ISV = 0, ISS = 0x00000007 [232066.589842] CM = 0, WnR = 0 [232066.589967] user pgtable: 64k pages, 48-bit VAs, pgdp=00002000956ff400 [232066.590231] [0000000000000058] pgd=08001100ae100003, p4d=08001100ae100003, pud=08001100ae100003, pmd=08001100b3c00003, pte=0000000000000000 [232066.590757] Internal error: Oops: 96000007 [#1] SMP [232066.590958] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm vhost_net vhost vhost_iotlb tap tun ipt_rpfilter xt_multiport ip_set_hash_ip ip_set_hash_net xfrm_interface xfrm6_tunnel tunnel4 tunnel6 esp4 ah4 wireguard libcurve25519_generic veth xt_addrtype xt_set nf_conntrack_netlink ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_bitmap_port ip_set_hash_ipport dummy ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs iptable_filter sch_ingress nfnetlink_cttimeout vport_gre ip_gre ip_tunnel gre vport_geneve geneve vport_vxlan vxlan ip6_udp_tunnel udp_tunnel openvswitch nf_conncount dm_round_robin dm_service_time dm_multipath xt_nat xt_MASQUERADE nft_chain_nat nf_nat xt_mark xt_conntrack xt_comment nft_compat nft_counter nf_tables nfnetlink ocfs2 ocfs2_nodemanager ocfs2_stackglue iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_ssif nbd overlay 8021q garp mrp bonding tls rfkill sunrpc ext4 mbcache jbd2 [232066.591052] vfat fat cas_cache cas_disk ses enclosure scsi_transport_sas sg acpi_ipmi ipmi_si ipmi_devintf ipmi_msghandler ip_tables vfio_pci vfio_pci_core vfio_virqfd vfio_iommu_type1 vfio dm_mirror dm_region_hash dm_log dm_mod nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc fuse xfs libcrc32c ast drm_vram_helper qla2xxx drm_kms_helper syscopyarea crct10dif_ce sysfillrect ghash_ce sysimgblt sha2_ce fb_sys_fops cec sha256_arm64 sha1_ce drm_ttm_helper ttm nvme_fc igb sbsa_gwdt nvme_fabrics drm nvme_core i2c_algo_bit i40e scsi_transport_fc megaraid_sas aes_neon_bs [232066.596953] CPU: 6 PID: 4124696 Comm: 10.253.166.125- Kdump: loaded Not tainted 5.15.131-9.cl9_ocfs2.aarch64 #1 [232066.597356] Hardware name: Great Wall .\x93\x8e...RF6260 V5/GWMSSE2GL1T, BIOS T656FBE_V3.0.18 2024-01-06 [232066.597721] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [232066.598034] pc : nfs4_reclaim_open_state+0x220/0x800 [nfsv4] [232066.598327] lr : nfs4_reclaim_open_state+0x12c/0x800 [nfsv4] [232066.598595] sp : ffff8000f568fc70 [232066.598731] x29: ffff8000f568fc70 x28: 0000000000001000 x27: ffff21003db33000 [232066.599030] x26: ffff800005521ae0 x25: ffff0100f98fa3f0 x24: 0000000000000001 [232066.599319] x23: ffff800009920008 x22: ffff21003db33040 x21: ffff21003db33050 [232066.599628] x20: ffff410172fe9e40 x19: ffff410172fe9e00 x18: 0000000000000000 [232066.599914] x17: 0000000000000000 x16: 0000000000000004 x15: 0000000000000000 [232066.600195] x14: 0000000000000000 x13: ffff800008e685a8 x12: 00000000eac0c6e6 [232066.600498] x11: 0000000000000000 x10: 0000000000000008 x9 : ffff8000054e5828 [232066.600784] x8 : 00000000ffffffbf x7 : 0000000000000001 x6 : 000000000a9eb14a [232066.601062] x5 : 0000000000000000 x4 : ffff70ff8a14a800 x3 : 0000000000000058 [232066.601348] x2 : 0000000000000001 x1 : 54dce46366daa6c6 x0 : 0000000000000000 [232066.601636] Call trace: [232066.601749] nfs4_reclaim_open_state+0x220/0x800 [nfsv4] [232066.601998] nfs4_do_reclaim+0x1b8/0x28c [nfsv4] [232066.602218] nfs4_state_manager+0x928/0x10f0 [nfsv4] [232066.602455] nfs4_run_state_manager+0x78/0x1b0 [nfsv4] [232066.602690] kthread+0x110/0x114 [232066.602830] ret_from_fork+0x10/0x20 [232066.602985] Code: 1400000d f9403f20 f9402e61 91016003 (f9402c00) [232066.603284] SMP: stopping secondary CPUs [232066.606936] Starting crashdump kernel... [232066.607146] Bye! Analysing the vmcore, we know that nfs4_copy_state listed by destination nfs_server->ss_copies was added by the field copies in handle_async_copy(), and we found a waiting copy process with the stack as: PID: 3511963 TASK: ffff710028b47e00 CPU: 0 COMMAND: "cp" #0 [ffff8001116ef740] __switch_to at ffff8000081b92f4 #1 [ffff8001116ef760] __schedule at ffff800008dd0650 #2 [ffff8001116ef7c0] schedule at ffff800008dd0a00 #3 [ffff8001116ef7e0] schedule_timeout at ffff800008dd6aa0 #4 [ffff8001116ef860] __wait_for_common at ffff800008dd166c #5 [ffff8001116ef8e0] wait_for_completion_interruptible at ffff800008dd1898 #6 [ffff8001116ef8f0] handle_async_copy at ffff8000055142f4 [nfsv4] #7 [ffff8001116ef970] _nfs42_proc_copy at ffff8000055147c8 [nfsv4] #8 [ffff8001116efa80] nfs42_proc_copy at ffff800005514cf0 [nfsv4] #9 [ffff8001116efc50] __nfs4_copy_file_range.constprop.0 at ffff8000054ed694 [nfsv4] The NULL-pointer dereference was due to nfs42_complete_copies() listed the nfs_server->ss_copies by the field ss_copies of nfs4_copy_state. So the nfs4_copy_state address ffff0100f98fa3f0 was offset by 0x10 and the data accessed through this pointer was also incorrect. Generally, the ordered list nfs4_state_owner->so_states indicate open(O_RDWR) or open(O_WRITE) states are reclaimed firstly by nfs4_reclaim_open_state(). When destination state reclaim is failed with NFS_STATE_RECOVERY_FAILED and copies are not deleted in nfs_server->ss_copies, the source state may be passed to the nfs42_complete_copies() process earlier, resulting in this crash scene finally. To solve this issue, we add a list_head nfs_server->ss_src_copies for a server-to-server copy specially. Fixes: 0e65a32 ("NFS: handle source server reboot") Signed-off-by: Yanjun Zhang <[email protected]> Reviewed-by: Trond Myklebust <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>
chenhuacai
force-pushed
the
master
branch
6 times, most recently
from
4640031
to
06e4eda
Compare
chenhuacai
pushed a commit
that referenced
this pull request
Oct 25, 2024
When creating a trace_probe we would set nr_args prior to truncating the arguments to MAX_TRACE_ARGS. However, we would only initialize arguments up to the limit. This caused invalid memory access when attempting to set up probes with more than 128 fetchargs. BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 UID: 0 PID: 1769 Comm: cat Not tainted 6.11.0-rc7+ #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 RIP: 0010:__set_print_fmt+0x134/0x330 Resolve the issue by applying the MAX_TRACE_ARGS limit earlier. Return an error when there are too many arguments instead of silently truncating. Link: https://lore.kernel.org/all/[email protected]/ Fixes: 035ba76 ("tracing/probes: cleanup: Set trace_probe::nr_args at trace_probe_init") Signed-off-by: Mikel Rychliski <[email protected]> Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
chenhuacai
force-pushed
the
master
branch
3 times, most recently
from
7da1e50
to
d8dcf28
Compare
chenhuacai
force-pushed
the
master
branch
2 times, most recently
from
776b61b
to
73ffac4
Compare
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Bumps urllib3 from 2.0.7 to 2.2.2.
Release notes
Sourced from urllib3's releases.
... (truncated)
Changelog
Sourced from urllib3's changelog.
Commits
27e2a5cRelease 2.2.2 (#3406)accff72Merge pull request from GHSA-34jh-p97f-mpxf34be4a5Pin CFFI to a new release candidate instead of a Git commit (#3398)da41058Bump browser-actions/setup-chrome from 1.6.0 to 1.7.1 (#3399)b07a669Bump github/codeql-action from 2.13.4 to 3.25.6 (#3396)b8589ecMeasure coverage with v4 of artifact actions (#3394)f3bdc55Allow triggering CI manually (#3391)5239265Fix HTTP version in debug log (#3316)b34619fBump actions/checkout to 4.1.4 (#3387)9961d14Bump browser-actions/setup-chrome from 1.5.0 to 1.6.0 (#3386)Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting
@dependabot rebase.Dependabot commands and options
You can trigger Dependabot actions by commenting on this PR:
@dependabot rebasewill rebase this PR@dependabot recreatewill recreate this PR, overwriting any edits that have been made to it@dependabot mergewill merge this PR after your CI passes on it@dependabot squash and mergewill squash and merge this PR after your CI passes on it@dependabot cancel mergewill cancel a previously requested merge and block automerging@dependabot reopenwill reopen this PR if it is closed@dependabot closewill close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually@dependabot show <dependency name> ignore conditionswill show all of the ignore conditions of the specified dependency@dependabot ignore this major versionwill close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)@dependabot ignore this minor versionwill close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)@dependabot ignore this dependencywill close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)You can disable automated security fix PRs for this repo from the Security Alerts page.