pimatic max thermostat plugin

Plugin to control the MAX! Thermostat (http://www.eq-3.de)

Installation

Clone this repository into your pimatic node_modules folder (eg. /home/pi/pimatic/node_modules)

You can load the plugin by editing your config.json to include (host = Max!Cube IP port=Max!Cube Port (default:62910)):

````
{ 
   "plugin": "max-thermostat",
   "host": "192.168.X.X",
   "port": 62910
}
````

in the plugins section. Also you will need to create a dummy device (explained further down) to get the debug output! This step is important!

Also you'll need to install the connector software "max-control" written by https://github.com/aslansky In the install dir (eg. ../node_modules/pimatic-max-thermostat) do a sudo npm install

Configuration

Use the debug output in pimatic to find out your roomID & available devices. Currently we only have support for thermostats!

Sample debug output:

09:04:42.165 [pimatic-max-thermostat] got update
09:04:42.168 [pimatic-max-thermostat] { type: 'Heating Thermostat',
09:04:42.168 [pimatic-max-thermostat]>  address: '12345cf', <-- deviceID
09:04:42.168 [pimatic-max-thermostat]>  serial: 'KEQ04116',
09:04:42.168 [pimatic-max-thermostat]>  name: 'Heizung',
09:04:42.168 [pimatic-max-thermostat]>  roomId: 1,
09:04:42.168 [pimatic-max-thermostat]>  comfortTemperature: 23,
09:04:42.168 [pimatic-max-thermostat]>  ecoTemperature: 16.5,
09:04:42.168 [pimatic-max-thermostat]>  maxTemperature: 30.5,
09:04:42.168 [pimatic-max-thermostat]>  minTemperature: 4.5,
09:04:42.168 [pimatic-max-thermostat]>  temperatureOffset: 3.5,
09:04:42.168 [pimatic-max-thermostat]>  windowOpenTemperature: 12,
09:04:42.168 [pimatic-max-thermostat]>  valve: 0,
09:04:42.168 [pimatic-max-thermostat]>  setpoint: 17,
09:04:42.168 [pimatic-max-thermostat]>  battery: 'ok',
09:04:42.168 [pimatic-max-thermostat]>  mode: 'manu' }

Thermostats can be defined by adding them to the devices section in the config file. Set the class attribute to MaxThermostatDevice. For example:

{ 
  "id": "bathroomLeft",
  "class": "MaxThermostatDevice", 
  "name": "Bathroom Radiator left",
  "roomID": 1,
  "deviceNo": "12345cf",
  "comfyTemp": 23.0,
  "ecoTemp": 17.5,
  "vacTemp": 16.5,
  "actTemp": 21.0,
  "mode": "auto",
  "battery": ""
}

For contactSensors add this config:

{ 
  "id": "window-bathroom",
  "class": "MaxContactSensor", 
  "name": "Bathroom Window",
  "deviceNo": "12345df"
}

Screenshot

![Screenshot 1][screen1_thumb] [screen1_thumb]: https://cloud.githubusercontent.com/assets/6489464/4346733/d30e7710-4110-11e4-87a7-934770234a84.PNG