add current dts

patch/kernel/archive/meson64-6.10/dt/meson-sm1-jethome-jethub-j200.dts

@@ -330,12 +330,15 @@
 		"", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "",
 		/* GPIOH */
-		"", "", "", "",
+		"HDMITX_SDA", /* GPIOH_0 */
+		"HDMITX_SCL", /* GPIOH_1 */
+		"HDMITX_HPD_IN", /* GPIOH_2 */
+		"AO_CEC_A", /* GPIOH_3 */
 		"HUB_RESET", /* GPIOH_4 */
 		"LED_RED", /* GPIOH_5 */
 		"I2C_SDA_MODULES", /* GPIOH_6 */
 		"I2C_SCL_MODULES", /* GPIOH_7 */
-		"",
+		"5V_EN", /* GPIOH_8 */
 		/* BOOT */
 		"", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "",
@@ -347,23 +350,11 @@
 		"I2C_SDA_SYSBUS", /* GPIOA_14 */
 		"I2C_SCL_SYSBUS", /* GPIOA_15 */
 		/* GPIOX */
-		"", /* GPIOX_0 */
-		"", /* GPIOX_1 */
-		"", /* GPIOX_2 */
-		"", /* GPIOX_3 */
-		"", /* GPIOX_4 */
-		"",  /* GPIOX_5 */
+		"", "", "", "", "", "", /* GPIOX_0 - GPIOX_5 */
 		"RS485_TX", /* GPIOX_6 */
 		"RS485_RX", /* GPIOX_7 */
-		"", /* GPIOX_8 */
-		"", /* GPIOX_9 */
-		"", /* GPIOX_10 */
-		"", /* GPIOX_11 */
-		"",  /* GPIOX_12 */
-		"", /* GPIOX_13 */
-		"", /* GPIOX_14 */
-		"", /* GPIOX_15 */
-		"", /* GPIOX_16 */
+		"", "", "", "", "", "", /* GPIOX_8 - GPIOX_13 */
+		"", "", "", /* GPIOX_14 - GPIOX_16 */
 		"I2C_SDA_LCDBUS",  /* GPIOX_17 */
 		"I2C_SCL_LCDBUS",  /* GPIOX_18 */
 		""; /* GPIOX_19 */
@@ -385,19 +376,20 @@
 &gpio_ao {
 	gpio-line-names =
 		/* GPIOAO */
-		"", "",
-		"USB_PWRON", /* GPIOAO_2 */
-		"",
+		"CONSOLE_TX",  /* GPIOAO_0 */
+		"CONSOLE_RX",  /* GPIOAO_1 */
+		"USB_OTG_PWR_EN", /* GPIOAO_2 */
+		"TFLASH_VDD_EN",  /* GPIOAO_3 */
 		"MCU_RESET", /* GPIOAO_4 */
 		"POWER_GOOD", /* GPIOAO_5 */
-		"",
-		"GPIO_EXPANDER", /* GPIOAO_7 */
+		"TF_3V3N_1V8_EN",  /* GPIOAO_6 */
+		"GPIO_EXPANDER_INT", /* GPIOAO_7 */
 		"MCU_UART_TX", /* GPIOAO_8 */
 		"MCU_UART_RX", /* GPIOAO_9 */
 		"BUTTON_USR", /* GPIOAO_10 */
 		"LED_GREEN", /* GPIOAO_11 */
 		/* GPIOE */
-		"", "", "";
+		"VDDEE_PWM", "VDDCPU_PWM", "TF_PWR_EN";
 };
 
 &hdmi_tx {
@@ -414,7 +406,7 @@
 };
 
 &pwm_AO_cd {
-	pinctrl-0 = <&pwm_ao_d_e_pins>; // GPIOE_1
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
 	clocks = <&xtal>;
 	clock-names = "clkin1";
@@ -457,8 +449,7 @@
 	cap-mmc-highspeed;
 	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
-	max-frequency = <400000000>;
+	max-frequency = <200000000>;
 	disable-wp;
 
 	mmc-pwrseq = <&emmc_pwrseq>;
@@ -476,8 +467,6 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0>;
-		/*spi-max-frequency = <4000000>;*/ /* 4MHz */
-		/*spi-max-frequency = <104000000>;*/
 		spi-max-frequency = <30000000>;
 	};
 };

patch/kernel/archive/meson64-6.6/dt/meson-sm1-jethome-jethub-j200-spinor.dts

@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "meson-sm1-jethome-jethub-j200.dts"
+
+/ {
+	model = "JetHub D2 with SPI NOR flash";
+};
+
+#include "meson-g12-enable-spinor.dtsi"