Ansible Role to deploy network configuration/interfaces on linux servers.
Tested:
- Debian 11
- Debian 12
# latest
ansible-galaxy role install git+https://github.com/ansibleguy/linux_networking
# from galaxy
ansible-galaxy install ansibleguy.linux_networking
# or to custom role-path
ansible-galaxy install ansibleguy.linux_networking --roles-path ./roles
# install dependencies
ansible-galaxy install -r requirements.yml
python3 -m pip install -r requirements.txt-
Need professional support using Ansible or Linux? Contact us:
E-Mail: [email protected]
Tel: +43 3115 40 900 0
Language: German or English
-
You want a simple Ansible GUI?
Check-out this Ansible WebUI
Define the network config as needed:
network:
support:
vlan: true
bridge: true
bonding: true
traffic_forwarding: true
ipv6: true
purge_orphaned_interfaces: true
interfaces: # for more config-details see: https://wiki.debian.org/NetworkConfiguration
ens192:
address: '192.168.142.90/24'
gateway: '192.168.142.1'
script_post-up: ['ip route add 172.16.100.0/24 dev ens192 src 192.168.142.90 via 192.168.142.10']
aliases:
- address: '2a09:cd41:f:42ee::1'
gateway: '2a09:cd41:f:42ee::f'
- '2a09:cd41:f:42ee::1'
bridge01:
bridge_ports: ['ens193', 'ens194']
script_down: ['/usr/local/sbin/random_script.sh']
ens195: # initialize parent interface
ens195.85:
vlan: true
hotplug: false
address: '10.0.85.90/24'
gateway: '10.0.85.1'
nameservers: ['10.0.85.1']
# nic bonding
# supported modes: 'balance-rr', 'active-backup', 'balance-xor', 'broadcast', '802.3ad', 'balance-tlb', 'balance-alb', 'lacp' (lacp => alias for 802.3ad)
# lacp bonding => lacp needs the switch-ports to be configured as well
bond01:
bond-mode: '802.3ad'
bond-lacp-rate: 1
bond-miimon: 100
address: '192.168.200.10/26'
bond-slaves: ['ens196', 'ens197'] # don't define slave interfaces on their own
# active-passive bonding
bond02:
bond-mode: 'active-passive'
address: '192.168.210.10/26'
bond-slaves: ['ens198', 'ens199']
# bond-primary: 'ens198' # if no primary is defined, it will be chosen automatically
validation:
enable: true
# tests to run when a network change is done
# if the tests fail; the changes of the current session will be restored
tests:
ping:
google_dns: '8.8.8.8'
port: # will test if the remote port is reachable (only TCP)
internal_web:
host: 'someSite.internal'
port: 443
startup_service:
enable: true
interfaces:
tunnel01:
type: 'vti'
args:
key: 32
local: '192.168.133.1'
remote: '192.168.133.2'
routes:
'192.168.142.1':
- net: '10.10.40.0/22'
metric: 50
tunnel01:
- net: '10.10.52.0/24'
routes_cmd:
- 'ip route add 0.0.0.0/0 via 192.168.142.254 metric 200'Run the playbook:
ansible-playbook -K -D -i inventory/hosts.yml playbook.ymlThere are also some useful tags available:
- base
- interfaces
- routing
-
Network interfaces
- bridges
- bonding
- vlans
- ipv4 & ipv6
-
Static routing
- via interface up-/down-scripts
- via startup service
-
Default opt-in:
- installing basic network-diagnostic tools
- purging of orphaned interfaces
- support for:
- ipv6
-
Default opt-out:
- network startup-service to allow specific configurations
- anti-lockout via network-validation script
- support for:
- interface bonding
- interface bridging
- vlan interfaces
- traffic forwarding (router-like)
-
Note: this role currently only supports debian systems (ubuntu partly)
-
Note: Most of the role's functionality can be opted in or out.
For all available options - see the default-config located in the main defaults-file!
-
Warning: Not every setting/variable you provide will be checked for validity. Bad config might break the role!
-
Note: The network-validation port-check only supports TCP target-ports as UDP-connectivity cannot be verified that easily.
Config
network:
support:
vlan: true
bridge: true
bonding: true
ipv6: false
interfaces:
ens192:
address: '10.48.2.90/24'
gateway: '10.48.2.254'
bond01:
bond-mode: 'balance-tlb'
address: '10.48.2.92/24'
bond-slaves: ['ens224', 'ens256']
ens161:
ens161.5:
vlan: true
hotplug: false
address: '10.10.55.10/24'
nameservers: ['10.0.55.1']
script_post-up: ['ip route add 192.168.4.0/22 via 10.10.55.1 metric 50']Result: (prettified)
guy@ansible:~# ip a
> 2: ens192:
> altname enp11s0
> inet 10.48.2.90/24 brd 10.48.2.255 scope global ens192
> 3: bond01 <MASTER,UP>
> inet 10.48.2.92/24 brd 10.48.2.255 scope global bond01
> 4: ens256: <SLAVE,UP>
> altname enp27s0
> 5: ens224: <SLAVE,UP>
> altname enp19s0
> 6: ens161:
> altname enp4s0
> 7: ens161.5@ens161:
> inet 10.10.55.10/24 brd 10.10.55.255 scope global ens161.5
guy@ansible:~# ip route show
> default via 10.48.2.254 dev ens192 onlink
> 10.10.55.0/24 dev ens161.5 proto kernel scope link src 10.10.55.10
> 10.48.2.0/24 dev bond01 proto kernel scope link src 10.48.2.92 linkdown
> 10.48.2.0/24 dev ens192 proto kernel scope link src 10.48.2.90
> 192.168.4.0/22 via 10.10.55.1 dev ens161.5 metric 50
guy@ansible:~# cat /proc/net/bonding/bond01
> Ethernet Channel Bonding Driver: v5.10.0-8-amd64
>
> Bonding Mode: transmit load balancing
> Primary Slave: None
> Currently Active Slave: ens224
> MII Status: up
> MII Polling Interval (ms): 100
> Up Delay (ms): 200
> Down Delay (ms): 200
> Peer Notification Delay (ms): 0
>
> Slave Interface: ens224
> MII Status: up
> Speed: 10000 Mbps
> Duplex: full
> Link Failure Count: 0
> Permanent HW addr: xx:xx:xx:xx:xx:xx
> Slave queue ID: 0
>
> Slave Interface: ens256
> MII Status: up
> Speed: 10000 Mbps
> Duplex: full
> Link Failure Count: 0
> Permanent HW addr: xx:xx:xx:xx:xx:xx
> Slave queue ID: 0Config
network:
validation:
enable: true
interfaces:
eth0:
address: '10.0.85.90/24'
gateway: '10.0.85.1'
aliases:
- address: '2a09:cd41:f:42ee::1/124'
gateway: '2a09:cd41:f:42ee::f'
- '2a09:cd41:f:42ee::2'Result: (prettified)
guy@ansible:~# ping -6 one.one.one.one -I 2a09:cd41:f:42ee::2
> PING one.one.one.one(one.one.one.one (2606:4700:4700::1111)) from 2a09:cd41:f:42ee::2 : 56 data bytes
> 64 bytes from one.one.one.one (2606:4700:4700::1111): icmp_seq=1 ttl=58 time=14.7 ms
guy@ansible:~# ip a
> 1: lo: <LOOPBACK,UP,LOWER_UP>
> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
> inet 10.0.85.90/24 brd 10.0.85.255 scope global eth0
> inet6 2a09:cd41:f:42ee::2/128 scope global deprecated
> inet6 2a09:cd41:f:42ee::1/124 scope global deprecated
guy@ansible:~# cat /etc/network/interfaces.d/eth0
> # Ansible managed
> # ansibleguy.linux_networking
>
> # for more config-details see: https://wiki.debian.org/NetworkConfiguration
>
> auto eth0
> allow-hotplug eth0
>
> iface eth0 inet static
> address 194.32.76.202/24
> gateway 194.32.76.1
> dns-nameservers 8.8.8.8 1.1.1.1
>
> # Interface aliases (additional ips)
> auto eth0:1
> allow-hotplug eth0:1
> iface eth0:1 inet6 static
> address 2a09:cd41:f:42ee::1/124
> gateway 2a09:cd41:f:42ee::f
>
> auto eth0:2
> allow-hotplug eth0:2
> iface eth0:2 inet6 static
> address 2a09:cd41:f:42ee::2
