Remove pypy support in setup.py #2

Workflow file for this run

	###
	# Initially copied from
	# https://github.com/actions/starter-workflows/blob/main/ci/python-package.yml
	# And later based on the version I (jamadden) updated at gevent/gevent
	#
	# Original comment follows.
	###
	###
	# This workflow will install Python dependencies, run tests and lint with a variety of Python versions
	# For more information see: https://help.github.com/actions/language-and-framework-guides/using-python-with-github-actions
	###

	###
	# Important notes on GitHub actions:
	#
	# - We only get 2,000 free minutes a month (private repos)
	# - We only get 500MB of artifact storage
	# - Cache storage is limited to 7 days and 5GB.
	# - macOS minutes are 10x as expensive as Linux minutes
	# - windows minutes are twice as expensive.
	#
	# So keep those workflows light.
	#
	# In December 2020, github only supports x86/64. If we wanted to test
	# on other architectures, we can use docker emulation, but there's no
	# native support.
	#
	# Another major downside: You can't just re-run the job for one part
	# of the matrix. So if there's a transient test failure that hit, say, 3.8,
	# to get a clean run every version of Python runs again. That's bad.
	# https://github.community/t/ability-to-rerun-just-a-single-job-in-a-workflow/17234/65

	name: tests


	# Triggers the workflow on push or pull request events
	on: [push, pull_request]
	# Limiting to particular branches might be helpful to conserve minutes.
	#on:
	# push:
	# branches: [ $default-branch ]
	# pull_request:
	# branches: [ $default-branch ]

	env:
	# Weirdly, this has to be a top-level key, not ``defaults.env``
	PYTHONHASHSEED: 8675309
	PYTHONUNBUFFERED: 1
	PYTHONDONTWRITEBYTECODE: 1
	# PYTHONDEVMODE leads to crashes in pylibmc.
	# See https://github.com/lericson/pylibmc/issues/254
	# - PYTHONDEVMODE=1
	PYTHONFAULTHANDLER: 1

	PIP_UPGRADE_STRATEGY: eager
	# Don't get warnings about Python 2 support being deprecated. We
	# know. The env var works for pip 20.
	PIP_NO_PYTHON_VERSION_WARNING: 1
	PIP_NO_WARN_SCRIPT_LOCATION: 1

	# Disable some warnings produced by libev especially and also some Cython generated code.
	# These are shared between GCC and clang so it must be a minimal set.
	# TODO: Figure out how to set env vars per platform without resorting to inline scripting.
	CFLAGS: -Ofast -pipe
	CXXFLAGS: -Ofast -pipe
	# Uploading built wheels for releases.
	# TWINE_PASSWORD is encrypted and stored directly in the
	# travis repo settings.
	TWINE_USERNAME: __token__

	###
	# caching
	###
	CCACHE_DIR: ~/.ccache
	CC: "ccache gcc"
	CCACHE_NOCPP2: true
	CCACHE_SLOPPINESS: file_macro,time_macros,include_file_ctime,include_file_mtime
	CCACHE_NOHASHDIR: true

	#


	jobs:

	build-relstorage:
	# Sigh. Note that the matrix must be kept in sync
	# with `test`
	runs-on: ${{ matrix.os }}
	strategy:
	matrix:
	python-version: [2.7, pypy-2.7-7.3.3, pypy-3.6, 3.6, 3.7, 3.8, 3.9, "3.10"]
	# ubuntu 18.04 ships with mysql 5.7; ubuntu 20.04 ships with
	# mysql 8.0
	os: [ubuntu-18.04, macos-latest]
	exclude:
	- os: macos-latest
	python-version: pypy-2.7-7.3.3
	- os: macos-latest
	python-version: pypy-3.6
	- os: macos-latest
	python-version: 3.5
	- os: macos-latest
	python-version: 3.6
	include:
	- os: ubuntu-20.04
	python-version: 3.8

	steps:
	- name: checkout
	uses: actions/checkout@v2
	- name: Set up Python ${{ matrix.python-version }}
	uses: actions/setup-python@v2
	with:
	python-version: ${{ matrix.python-version }}
	- name: Install ccache, configure CFLAGS (ubuntu)
	uses: ./.github/actions/config-cc
	###
	# Caching.
	# This actually restores a cache and schedules a cleanup action
	# to save the cache. So it must come before the thing we want to use
	# the cache.
	###
	- name: Cache ~/.ccache
	uses: actions/cache@v2
	with:
	path: ~/.ccache/
	key: ${{ runner.os }}-ccache2-${{ matrix.python-version }}

	- name: Get pip cache dir
	id: pip-cache
	run: \|
	echo "::set-output name=dir::$(pip cache dir)"

	- name: pip cache
	uses: actions/cache@v2
	with:
	path: ${{ steps.pip-cache.outputs.dir }}
	key: ${{ runner.os }}-pip3-${{ matrix.python-version }}
	restore-keys: \|
	${{ runner.os }}-pip3-

	- name: Install native libs
	uses: ./.github/actions/install-native-libs


	- name: Install Build Dependencies
	# CAUTION: Updated gevent and greenlet 2.0 are going to clash
	# here. Why are we manually installing greenlet anyway?
	run: \|
	pip install -U pip
	pip install -U -q setuptools wheel twine
	pip install -q -U 'cython>=3.0a6'
	pip install 'greenlet~=1.0;platform_python_implementation=="CPython"'

	- name: Build RelStorage
	run: \|
	# Next, build the wheel in place. This helps ccache, and also lets us cache the configure
	# output (pip install uses a random temporary directory, making this difficult).
	python setup.py build_ext -i
	python setup.py bdist_wheel
	# Also install it, so that we get dependencies in the (pip) cache.
	pip install .[test]

	- name: Check RelStorage build
	run: \|
	ls -l dist
	twine check dist/*
	- name: Upload RelStorage wheel
	uses: actions/upload-artifact@v2
	with:
	name: RelStorage-${{ runner.os }}-${{ matrix.python-version }}.whl
	path: dist/*whl
	- name: Publish package to PyPI (mac)
	# We cannot 'uses: pypa/[email protected]' because
	# that's apparently a container action, and those don't run on
	# the Mac.
	if: github.event_name == 'push' && startsWith(github.ref, 'refs/tags') && startsWith(runner.os, 'Mac')
	env:
	TWINE_PASSWORD: ${{ secrets.TWINE_PASSWORD }}
	run: \|
	twine upload --skip-existing dist/*

	test:
	needs: build-relstorage
	runs-on: ${{ matrix.os }}
	strategy:
	matrix:
	python-version: [2.7, pypy-2.7-7.3.3, pypy-3.6, 3.6, 3.7, 3.8, 3.9, "3.10"]
	# ubuntu 18.04 ships with mysql 5.7; ubuntu 20.04 ships with
	# mysql 8.0
	os: [ubuntu-18.04, macos-latest]
	exclude:
	- os: macos-latest
	python-version: pypy-2.7-7.3.3
	- os: macos-latest
	python-version: pypy-3.6
	- os: macos-latest
	python-version: 3.5
	- os: macos-latest
	python-version: 3.6
	include:
	- os: ubuntu-20.04
	python-version: 3.8

	steps:
	- name: checkout
	uses: actions/checkout@v2
	- name: Set up Python ${{ matrix.python-version }}
	uses: actions/setup-python@v2
	with:
	python-version: ${{ matrix.python-version }}
	- name: Install ccache, configure CFLAGS (ubuntu)
	uses: ./.github/actions/config-cc

	- name: Cache ~/.ccache
	uses: actions/cache@v2
	with:
	path: ~/.ccache/
	key: ${{ runner.os }}-ccache2-${{ matrix.python-version }}

	- name: Get pip cache dir
	id: pip-cache
	run: \|
	echo "::set-output name=dir::$(pip cache dir)"

	- name: pip cache
	uses: actions/cache@v2
	with:
	path: ${{ steps.pip-cache.outputs.dir }}
	key: ${{ runner.os }}-pip3-${{ matrix.python-version }}
	restore-keys: \|
	${{ runner.os }}-pip3-

	- name: Install native libs
	uses: ./.github/actions/install-native-libs

	- name: Build mysqlclient
	# Ubuntu 20 doesn't have libmysqlclient.20, but mysqlclient
	# client binaries on PyPI are linked against that. We can install that,
	# but then SSL breaks for an unknown reason, and we can't disable SSL
	# because authentication requires it (maybe we could change the authentiaction plugin?)
	# So instead we install the development sources and compile mysqlclient locally.
	# The relevant package, libmysqlclient-dev, is already installed.
	if: startsWith( matrix.os, 'ubuntu-20')
	run: \|
	pip install --no-binary :all: mysqlclient
	- name: Download RelStorage wheel
	uses: actions/download-artifact@v2
	with:
	name: RelStorage-${{ runner.os }}-${{ matrix.python-version }}.whl
	path: dist/
	- name: Install RelStorage
	# I'd prefer to install the wheel in non-editable mode, but that seems to
	# screw up coverage reporting.
	# XXX: So this may be broken now
	run: \|
	pip install -U coverage
	pip install -U 'faulthandler; python_version == "2.7" and platform_python_implementation == "CPython"'
	pip install -U "`ls dist/RelStorage-*.whl`[test,all_tested_drivers]"
	# Also unzip into src/ so that zope.testrunner can find the .so files
	# when we ask it to load tests from that directory.
	unzip -n dist/RelStorage-*whl -d src
	- name: Initialize Test Databases
	if: startsWith(runner.os, 'macOS')
	run: \|
	brew services start mysql
	brew services start postgresql
	# Make sure postgresql is accepting connections.
	# TODO: Use pg_isready in a loop?
	sleep 5
	# XXX: mysql isn't currently starting. Why? So
	# skip initializing it.
	#
	# brew postgres uses the current username, apparently, instead of
	# the standard "postgres" user as the root. It still uses 'postgres'
	# as the default database, though.
	brew services list
	RELSTORAGETEST_PG_UNAME=$USER RELSTORAGETEST_PG_DBNAME=postgres .travis/postgres.sh
	- name: Initialize Test Databases
	if: startsWith(runner.os, 'Linux')
	run: \|
	sudo systemctl start mysql.service
	echo Configuring MySQL
	RELSTORAGETEST_MY_PW="--password=root" .travis/mysql.sh
	# XXX: Disabled: The software is installed, but isn't running by default,
	# apparently. They really want you to use a docker service.
	# echo Configuring PostgreSQL
	# .travis/postgres.sh
	- name: Run tests and report coverage
	uses: ./.github/actions/run-tests
	with:
	useCoverage: ${{ !startsWith(matrix.python-version, 'pypy') }}
	- name: Submit to Coveralls
	# This is a container action, which only runs on Linux.
	if: ${{ !startsWith(matrix.python-version, 'pypy') && startsWith(runner.os, 'Linux') }}
	uses: AndreMiras/coveralls-python-action@develop
	with:
	parallel: true

	coveralls_finish:
	needs: [test]
	runs-on: ubuntu-latest
	steps:
	- name: Coveralls Finished
	uses: AndreMiras/coveralls-python-action@develop
	with:
	parallel-finished: true


	lint:
	needs: build-relstorage
	runs-on: ${{ matrix.os }}
	strategy:
	matrix:
	python-version: [3.9]
	os: [ubuntu-18.04]

	steps:
	- name: checkout
	uses: actions/checkout@v2
	- name: Set up Python ${{ matrix.python-version }}
	uses: actions/setup-python@v2
	with:
	python-version: ${{ matrix.python-version }}

	- name: Get pip cache dir
	id: pip-cache
	run: \|
	echo "::set-output name=dir::$(pip cache dir)"

	- name: pip cache
	uses: actions/cache@v2
	with:
	path: ${{ steps.pip-cache.outputs.dir }}
	key: ${{ runner.os }}-pip3-${{ matrix.python-version }}
	restore-keys: \|
	${{ runner.os }}-pip3-
	- name: Install ccache, configure CFLAGS (ubuntu)
	uses: ./.github/actions/config-cc

	- name: Download RelStorage wheel
	uses: actions/download-artifact@v2
	with:
	name: RelStorage-${{ runner.os }}-${{ matrix.python-version }}.whl
	path: dist/
	- name: Install RelStorage
	run: \|
	pip install -U pip
	pip install -U wheel
	pip install -U `ls dist/RelStorage-*`[test]
	- name: Lint
	# We only need to do this on one version, and it should be Python 3, because
	# pylint has stopped updating for Python 2.
	# We used to pass ``limit-inference-results=1``, thinking that
	# sped things up. It doesn't actually seem to, and it does
	# cause a bunch of false positives, at least in 2.9.3.
	run: \|
	pip install -U pylint
	python -m pylint --rcfile=.pylintrc relstorage -f parseable -r n

	manylinux_x86_64:
	runs-on: ubuntu-latest
	# We use a regular Python matrix entry to share as much code as possible.
	strategy:
	matrix:
	python-version: [3.9]

	steps:
	- name: checkout
	uses: actions/checkout@v2
	- name: Set up Python ${{ matrix.python-version }}
	uses: actions/setup-python@v2
	with:
	python-version: ${{ matrix.python-version }}
	- name: Cache ~/.ccache
	uses: actions/cache@v2
	with:
	path: ~/.ccache/
	key: ${{ runner.os }}-ccache_manylinux2-${{ matrix.python-version }}
	- name: Get pip cache dir
	id: pip-cache
	run: \|
	echo "::set-output name=dir::$(pip cache dir)"

	- name: pip cache
	uses: actions/cache@v2
	with:
	path: ${{ steps.pip-cache.outputs.dir }}
	key: ${{ runner.os }}-pip_manylinux_x8664-${{ matrix.python-version }}
	restore-keys: \|
	${{ runner.os }}-pip-

	- name: Update pip
	run: pip install -U pip
	- name: Build RelStorage
	# An alternate way to do this is to run the container directly with a uses:
	# and then the script runs inside it. That may work better with caching.
	# See https://github.com/pyca/bcrypt/blob/f6b5ee2eda76d077c531362ac65e16f045cf1f29/.github/workflows/wheel-builder.yml
	env:
	DOCKER_IMAGE: quay.io/pypa/manylinux2010_x86_64
	run: scripts/releases/make-manylinux
	- name: Upload RelStorage wheels
	uses: actions/upload-artifact@v2
	with:
	path: wheelhouse/*whl
	name: manylinux_x86_64_wheels.zip
	- name: Restore pip cache permissions
	run: sudo chown -R $(whoami) ${{ steps.pip-cache.outputs.dir }}
	- name: Publish package to PyPI
	uses: pypa/[email protected]
	if: github.event_name == 'push' && startsWith(github.ref, 'refs/tags')
	with:
	user: __token__
	password: ${{ secrets.TWINE_PASSWORD }}
	skip_existing: true
	packages_dir: wheelhouse/

	# TODO:
	# * Use YAML syntax to share snippets, like the old .travis.yml did
	# Sadly, as of 2021-02-01, Github Actions does not support anchors at
	# all. Just having an anchor results in an error:
	#
	# The workflow is not valid. .github/workflows/tests.yml: Anchors
	# are not currently supported. Remove the anchor 'an-strategy'
	#
	# The alternative of using composite actions doesn't work either,
	# because composite actions are limited to running shell scripts.
	# Steps in them can't call other actions with `uses:`, and nor can
	# they be conditional with `if:`.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Remove pypy support in setup.py #2

Workflow file

Remove pypy support in setup.py #2

Jobs

Run details

Workflow file for this run