Skip to content

Support material for Lasp applications on Grisp boards.

Notifications You must be signed in to change notification settings

achlysproject/grisp-lasp

 
 

Repository files navigation

Running Lasp Language on GRiSP boards

This is a repository intended to gather information and provide useful support for design and configuration of applications written in Lasp and running on GRiSP boards.

Proposed design

Based on the principles of edge computing specified by LightKone, the distributed nodes should be able to replicate a fraction of the state and operate locally. As an attempt to implement that pattern, the following design is proposed for an edge node :

Design

Cloning/Copying existing project :

If the rebar3 grisp build command returns an error code that contains anything similar to :

configure: error: C compiler cannot create executables

Eventhough the toolchain path is correctly set in the rebar.config of the project, emptying the rebar3 cache and rebuilding in a new project should provide a workaround. It can be done with the following commands (shell) :

rm -rdf {~/.cache/rebar3/*,/path/to/defect/project}
rebar3 new grispapp=newproject dest=/path/to/sd
cp -a /path/to/defect/project/{grisp,rebar.config,src} /path/to/newproject && cd /path/to/newproject && rebar3 grisp build

Since the environment and path can be altered if builds/deployments have been made if sudo was previously called, the files in otp/20.2/build/make can contain incorrect references when the configuration is run after a build. Erasing the cache and building from a new app folder can solve this issue.

Dependencies source files inclusion :

If the sources of the application's dependencies are not correctly included in the build for the SD card, cleaning the previous build and unlocking the rebar lock file can be helpful :

cd /path/to/project && rm -rdf {_build,_grisp}
rebar3 unlock && rebar3 grisp build && rebar3 compile

rm -rdf ~/.cache/rebar3/plugins/* && rm -rdf _build/grisp && rm -rdf _grisp && rebar3 unlock && rebar3 grisp build

NOTE : when calling commands cp and rm on multiple targets such as {file1,file2,...}, the files must always be separated by commas that are never followed by spaces e.g. never {file1, file2, ...} otherwise the shell is unable to locate them.

Auto-deployment script usage :

The script detects when the SD Card is inserted and compiles the project, deploys and unmounts the card automatically. The script requires sudo privilegies for unmounting.

Note : the rebar.config must not call unmount/umount in the post_script argument for the grisp plugin.

Usage :

$ sudo ./grisp_deploy.sh -s /Path/to/GRISP -a /Path/to/application/ [-n <name>]

Where the parameters are the following :

  • -s : SD Card path e.g. : -s /Volumes/GRISP

  • -a : Path to the target application root folder e.g. : -a /GRISP/robot/

  • n : (optional) Name of the target application e.g. : robot. If not supplied, the first found module will be deployed.

Installation :

Documentation is available in the Grisp wiki. This section describes specific encountered installation cases and further remarks/notes.

Ubuntu 16.04.3 LTS

Once Rebar3 has been installed with the help of

$ mkdir ~/bin
$ curl -o ~/bin/rebar3 https://s3.amazonaws.com/rebar3/rebar3
$ chmod +x ~/bin/rebar3

Running the rebar3 command resulted in an error of type :

No command 'rebar3' found

The following commands must be executed :

cd ~/bin/
./rebar3 local install

And after appending the resulting line to the ~/.bashrc file :

export PATH=$HOME/.cache/rebar3/bin:$PATH

The rebar3 plugins list command can be runned in order to check whether the binary can now be executed.

After creating a new grispapp and adding the toolchain in the rebar.config of that app, it can be built using :

cd <grisp app name>
rebar3 grisp build

Configuring Grisp's network

Configuring the network layer of Grisp boards has not yet been implemented and therefore needs the following manipulation to manually change the network layer on Grisp:

In the existing node folder, you will need to change the erl_main.c located at _build/default/lib/grisp/grisp/grisp_base/sys/.

After changing the file, run the following command :

rebar3 grisp build

The Grisp plugin for rebar will build the custom OTP version used in Grisp and will replace OTP's default version of erl_main.c with the file you previously modified.

You can verify that your erl_main.c has been included in OTP's build by viewing the latter which is located at : _grisp/otp/20.2/build/erts/emulator/sys/unix/erl_main.c

Note: An example is provided in node/grisp/grisp_base/sys/erl_main.c.

About

Support material for Lasp applications on Grisp boards.

Resources

Stars

Watchers

Forks

Packages

No packages published

Languages

  • C 100.0%