Raspberry PI AIS Receiver for Ship tracking
Work on:
- Raspberry PI 3 B
- Raspberry PI 3 B+
Here's the code:
- sudo apt-get update
- sudo apt-get upgrade
- sudo apt-get install git git-core cmake libusb-1.0-0-dev build-essential lsof
install the RTL-2832U USB dongle driver
- git clone https://git.osmocom.org/rtl-sdr
- cd rtl-sdr
- mkdir build
- cd build
- cmake ../ -DINSTALL_UDEV_RULES=ON
- make -j4
- sudo make install
- sudo ldconfig
- sudo ldconfig
You should now do these steps to tell the system about what the new device is allowed to do, and reboot the system:
- cd ~
- sudo cp ./rtl-sdr/rtl-sdr.rules /etc/udev/rules.d/
- sudo reboot
- rtl_test
On most versions of Raspian except very early ones, you will need to "blacklist" the rtl2830 device to stop the OS using the DAB/TV drivers for the device.
- cd /etc/modprobe.d
- sudo nano no-rtl.conf
Add the following lines
-
blacklist dvb_usb_rtl28xxu
-
blacklist rtl2832
-
blacklist rtl2830
-
sudo reboot
-
rtl_test -t
If you get error messages such as "cb transfer status: 1, canceling." it may be because the dongle is taking too much power from the Raspberry Pi.
Let's Install AIS
-
sudo apt-get install update
-
sudo apt-get install upgrade
-
sudo apt install build-essential libtool automake autoconf librtlsdr-dev libfftw3-dev
-
git clone https://github.com/steve-m/kalibrate-rtl
-
cd kalibrate-rtl/
-
./bootstrap && CXXFLAGS='-W -Wall -O3'
-
./configure
-
make
-
sudo make install
-
rtl_test -p
-
kal -s 900 -g 49.6 -e 23
-
kal -c 5 -g 49.6 -e 23
-
cd ~
-
git clone https://github.com/dgiardini/rtl-ais
-
cd rtl-ais
-
make
-
./rtl_ais -p 35 -n -h 192.168.1.15 change with your PC IP
Thanks to: https://www.fontenay-ronan.fr/ais-receiver-on-a-raspberry-pi-with-rtl-sdr/