techpack: display: Make sure the gpio is valid before direction input

This fixes the following warning:

[    2.481219] invalid GPIO -2
[    2.481252] WARNING: CPU: 3 PID: 1 at drivers/gpio/gpiolib.c:128 gpio_to_desc+0xa8/0xb8
[    2.481259] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G S                4.19.157-Horizon-04171159 #4
[    2.481264] Hardware name: Qualcomm Technologies, Inc. kona MTP 19805 (DT)
[    2.481269] pstate: 60800005 (nZCv daif -PAN +UAO)
[    2.481274] pc : gpio_to_desc+0xa8/0xb8
[    2.481279] lr : gpio_to_desc+0xa4/0xb8
[    2.481283] pc : ffffffad27c09f88
[    2.481286] lr : ffffffad27c09f84
[    2.481289] sp : ffffff800805b7c0
[    2.481293] x29: ffffff800805b7c0 x28: 0000000000000000
[    2.481298] x27: ffffffe97f8e4800 x26: 0000000000000001
[    2.481303] x25: 0000000000000002 x24: 0000000000000002
[    2.481308] x23: 0000000000000050 x22: 0000000000000002
[    2.481313] x21: 0000000000000000 x20: ffffffad2a68f860
[    2.481318] x19: 00000000fffffffe x18: ffffffad2b25b000
[    2.481323] x17: 00000000007c12a0 x16: 00000000000000c4
[    2.481328] x15: ffffffad29243bbc x14: 0000000000003139
[    2.481332] x13: 0000000000000348 x12: 0000000000000000
[    2.481337] x11: 0000000000000000 x10: ffffffffffffffff
[    2.481342] x9 : 198684d2b1dd3700 x8 : 198684d2b1dd3700
[    2.481347] x7 : 323138342e322020 x6 : ffffffe959576883
[    2.481352] x5 : 0000000000000000 x4 : 0000000000000003
[    2.481356] x3 : 000000000000001f x2 : 0000000000000001
[    2.481361] x1 : 0000000000000000 x0 : 0000000000000000
[    2.481367] Call trace:
[    2.481372] gpio_to_desc+0xa8/0xb8
[    2.481377] dsi_panel_drv_init+0x4e8/0x734
[    2.481383] dsi_display_bind+0xa70/0xc88
[    2.481390] component_bind_all+0x128/0x254
[    2.481396] msm_drm_bind+0x154/0x884
[    2.481401] try_to_bring_up_master+0x13c/0x184
[    2.481405] component_add+0xd0/0x184
[    2.481412] dp_display_probe+0x2f8/0x43c
[    2.481418] platform_drv_probe+0x7c/0xb4
[    2.481422] really_probe+0x270/0x2f4
[    2.481427] driver_probe_device+0x60/0xf8
[    2.481431] __driver_attach+0xe8/0x124
[    2.481436] bus_for_each_dev+0x78/0xc0
[    2.481440] driver_attach+0x20/0x28
[    2.481444] bus_add_driver+0x128/0x20c
[    2.481449] driver_register+0x74/0x108
[    2.481454] __platform_driver_register+0x40/0x48
[    2.481460] dp_display_init+0x1c/0x54
[    2.481465] do_one_initcall+0xd0/0x210
[    2.481470] do_initcall_level+0x13c/0x164
[    2.481474] do_basic_setup+0x48/0x94
[    2.481478] kernel_init_freeable+0xac/0x144
[    2.481486] kernel_init+0x14/0x2b0
[    2.481492] ret_from_fork+0x10/0x18
[    2.481497] ---[ end trace ac7e091c9f24763b ]---

Change-Id: Ic83f9a2f7192a97e1cd53f8cc89cc94b06acf55b
Signed-off-by: LibXZR <[email protected]>

techpack/display/msm/dsi/dsi_panel.c

@@ -416,8 +416,8 @@ static int dsi_panel_gpio_request(struct dsi_panel *panel)
 		rc = gpio_request(r_config->panel_te_esd_gpio, "panel_te_esd_gpio");
 		if (rc)
 			DSI_ERR("request for  panel_te_esd_gpio failed, rc=%d", rc);
+		gpio_direction_input(r_config->panel_te_esd_gpio);
 	}
-	gpio_direction_input(r_config->panel_te_esd_gpio);
 #endif
 
 #ifdef OPLUS_FEATURE_ADFR