VA1.4.6

1.4.6

❤️ New Features

• Added WiFi Pineapple detection (requires PineAP to be in active mode) - @jaylikesbunda
• Added Local Network Port Scanning - @Spooks4576
• Added support for New CYD Model (2432S024C) - @Spooks4576

🐛 Bug Fixes

• Fixed BLE Crash on some devices! - @Spooks4576
• retry deauth channel switch + vtaskdelays - @jaylikesbunda
• Resolve issues with JC3248W535EN devices #116 - @i-am-shodan, @jaylikesbunda
• Remove Incorrect PCAP log spam message - @jaylikesbunda

🤏 Tweaks

• Added a IFDEF for Larger Display Buffers On Non ESP32 Devices - @Spooks4576
• Revised 'gpsinfo' logs to be more helpful and consistent - @jaylikesbunda
• Added logs to tell if GPS module is connected correctly- @jaylikesbunda
• Added RGB Pulse for AirTag and Card Skimmer detection - @jaylikesbunda
• Log Cleanup - @jaylikesbunda
• Miscellaneous fixes and improvements - @Spooks4576, @jaylikesbunda

VA1.4.5

1.4.5

🛠️ Core Improvements

• Added starting logs to capture commands - @jaylikesbunda
• Improved WiFi connection logic - @jaylikesbunda
• Added support for variable display timeout on TWatch S3 - @jaylikesbunda
• Revise stop command callbacks to be more consistent - @jaylikesbunda, @Spooks4576

🌐 Network Features

• Enhanced Deauth Attack with bidirectional frames, proper 802.11 sequencing, and rate limiting (thank you @SpacehuhnTech for amazing reference code) - @jaylikesbunda
• Added BLE Packet Capture support - @jaylikesbunda
• Added BLE Wardriving - @jaylikesbunda
• Added support for detecting and capturing packets from card skimmers - @jaylikesbunda
• Added "gpsinfo" command to retrieve and display GPS information - @jaylikesbunda

🖥️ Interface & UI

• Added more terminal view logs - @jaylikesbunda, @Spooks4576
• Better access for shared lvgl thread for panels where other work needs to be performed - @i-am-shodan
• Revised the WebUI styling to be more consistent with GhostESP.net - @jaylikesbunda
• Terminal View scrolling improvements - @jaylikesbunda
• Terminal_View_Add_Text queue system for adding text to the terminal view - @jaylikesbunda
• Revise options screen styling - @jaylikesbunda

🐛 Bug Fixes

• Fix GhostNet not coming back after stopping beacon - @Spooks4576
• Fixed GPS buffer overflow issue that could cause logging to stop - @jaylikesbunda
• Improved UART buffer handling to prevent task crashes in terminal view - @jaylikesbunda
• Terminal View trunication and cleanup to prevent overflow - @jaylikesbunda
• Fix and revise station scan command - @Spooks4576

🔧 Other Improvements

• Pulse LEDs Orange when Flipper is detected - @jaylikesbunda
• Refine DNS handling to more consistently handle redirects - @jaylikesbunda
• Removed Wi-Fi warnings and color codes for cleaner logs - @jaylikesbunda
• Miscellaneous fixes and improvements - @jaylikesbunda, @Spooks4576
• WebUI fixes for better functionality - @Spooks4576

📦 External Updates

• New https://ghostesp.net website! - @jaylikesbunda
• Ghost ESP Flipper App v1.1.8 - @jaylikesbunda
• Cleanup README.md - @jaylikesbunda

VA1.4.4

What's Changed

• Fixed Frontend issues and settings saving with the web UI.
• Valid WiGLE CSV Headers by @jaylikesbunda in #98
• GPS and Storage Logging Improvements by @jaylikesbunda in #99
• Added more timezones! For web UI for watch Users by @jaylikesbunda in #100
• fixed pcap malformation + misc by @jaylikesbunda in #104
• Added the ability to scan for different devices through MDNS When connected to a Wi-Fi Network.

Full Changelog: VA1.4.3...VA1.4.4

VA1.4.3

What's Changed

• Removed Useless / Unused features from the web UI
• Added GPS RX Pin to Web UI so GPS Support will function dynamically
• SSID And Password with spaces should be fixed now when connecting to a wifi network via the web UI
  for Serial Terminal you will need to wrap your SSID or Password in Quotes " " if it has spaces
• Open Networks are now supported upon connecting to a wifi network

Notes

• Open network support is not supported for Open Networks that require you to login via a web browser for obvious reasons i hope you guys understand this limitation thank you.

Full Changelog: VA1.4.2...VA1.4.3

VA1.4.2

What's Changed

• More Board Support We Now Support 3 New Devices

1. Marauder V4 and Flipper Hub / Ultimate Marauder
2. Lilly Go T Watch S3 Lora Is Now Supported (Lora, gyro, mic and speaker is not implemented yet)
3. CYD / Cheap Yellow Display CYD2USB 2.4 inch variant is now supported

• Moved Unimportant apps to the apps folder
• Issues with spaces in SSID and Password For Evil Portal Should be fixed
• Added Accent Color to the Web UI So now you can change the status bar color to whatever hex color code you like
• GPS Support is now on Screen Enabled Boards
• Terminal View now allows scrolling the same way the options view allows selection

1. Up on the screen to move up
2. Down on the screen to move down
3. Middle press on the screen to go back

Notes

• Lilly Go S3 T Watch Only Has the following supported for now

1. RTC Clock
2. Battery Percentage in status bar
3. Touch and Screen

Stay Tuned For More Lilly Go S3 T Watch and Carputer Features in the next release

Full Changelog: VA1.4.1...VA1.4.2

VA1.4.1

What's Changed

• Web UI Redesign (This will be the final redesign on the web UI)
• SD Card Manager in the web UI (Delete upload and download files from the sd card)
• Cardputers Input is now fixed (Up down left and right should all work depending on what menu your in)
• SD Card Support Added for Waveshare 7 Inch LCD Build
• Misc Bug Fixes

Notes

• I Plan to release Marauder V4 and Yet Another CYD Variant Support soon so keep an eye out on releases for new builds

Full Changelog: VA1.4...VA1.4.1

VA1.4

What's Changed

• Evil Portal Live Keystroke logger added (Injects JavaScript into the page dynamically)
• Logs have been fully cleaned up no more useless junk being logged and its more viewable on the flipper zero
• GPS Support now fully working with wardriving!!!
• Web UI / Default Values have been fixed resulting in less issues with Wi-Fi related features
• Miscellaneous bug fixes

Notes

Any issues related to board support should be redirected to the official discord located in the Ghost ESP GitHub Wiki...
Do not make a GitHub issue unless its strictly a firmware bug or firmware related issue thank you...

Full Changelog: VA1.3.7...VA1.4

VA1.3.7

What's Changed

• add control app using qt6 by @1999AZZAR in #32
• CYD RGB LED Support added
• SD Card Support Has Been Added

Notes

Marauder V6 and Awok Dual Touch / Mini do not have SD card Support due to hardware and software related issues that make it impossible to port to these devices thank you for your understanding...

Full Changelog: VA1.3.5...VA1.3.7

VA1.3.5

What's Changed

• Major UI Overhaul
• Splash Screen is less demanding on CPU
• Flappy Ghost is Fixed among other things
• Smaller Screen Size Adjustments / fixes
• Scan AP Time is Longer
• Misc Bug Fixes

Notes

Releases Might not be immediately available upon reading this, i am currently testing github actions please be patient while it uploads.

Full Changelog: VA1.3...VA1.3.5

VA1.3

What's Changed

• Screen Support Is Finally Here and its Packed with features
• On Screen Display Visualizer
• New Flappy Ghost Game
• More Device Support for Screens
• Stability Issues Fixed / Improved Screen Support is now faster than ever

Notes

• If You don't know what to flash use the generic build

Full Changelog: VA1.2.5...VA1.3