Skip to content

Commit

Permalink
Merge branch 'TinCanTech-improve-vars-auto-load'
Browse files Browse the repository at this point in the history 
Signed-off-by: Richard T Bonhomme <[email protected]>
  • Loading branch information
@TinCanTech
TinCanTech committed Sep 21, 2023
2 parents 2720fc1 + 49ffffc commit 060299f
Showing 1 changed file with 68 additions and 90 deletions.
158 changes: 68 additions & 90 deletions easyrsa3/easyrsa
View file
Original file line number Diff line number Diff line change
Expand Up @@ -546,9 +546,10 @@ General options:
--raw|raw-ca : Build CA with password via RAW SSL input

--vars=FILE : Define a specific 'vars' file to use for Easy-RSA config
(Default vars file is in the EasyRSA PKI directory)
--pki-dir=DIR : Declare the PKI directory
(Default vars file is in the current working directory)
--pki=DIR : Declare the PKI directory
(Default PKI directory is sub-directory 'pki')
See Advanced.md for in depth usage.

--ssl-conf=FILE : Define a specific OpenSSL config file for Easy-RSA to use
(Default config file is in the EasyRSA PKI directory)
Expand Down Expand Up @@ -5622,13 +5623,14 @@ vars_setup() {
vars=

# Find vars
# Explicit user defined vars file:
# User set vars '$user_vars_true' takes priority
# Deliberate NO vars
if [ "$EASYRSA_NO_VARS" ]; then
# User set vars turns off pki/var warning
user_vars_true=1
# Found exactly zero vars files
found_vars=0

# Priority: Explicit user defined vars file:
elif [ "$EASYRSA_VARS_FILE" ]; then
if [ -e "$EASYRSA_VARS_FILE" ]; then
vars="$EASYRSA_VARS_FILE"
Expand All @@ -5643,62 +5645,53 @@ The 'vars' file was not found:
* $EASYRSA_VARS_FILE"
fi

# Otherwise, find vars
else

# set up program path
prog_file="$0"
prog_dir="${prog_file%/*}"
if [ "$prog_dir" = . ] || [ "$prog_dir" = "$PWD" ]
then
prog_in_pwd=1
# Secondary: Setting EASYRSA forces vars to EASYRSA/vars
elif [ "$EASYRSA" ]; then
if [ -e "$EASYRSA/vars" ]; then
vars="${EASYRSA}/vars"
user_vars_true=1
found_vars=1
else
unset -v prog_in_pwd
# Allow to run without EASYRSA/vars file
user_vars_true=1
found_vars=0
fi

# Program dir vars - This location is least wanted.
prog_vars="${prog_dir}/vars"

# set up PKI path vars - Top preference
pki_vars="${EASYRSA_PKI:-$PWD/pki}/vars"
# Otherwise, find vars
else

# Some other place vars, out of scope.
if [ "$EASYRSA" ]; then
easy_vars="${EASYRSA}/vars"
# If EASYRSA_PKI is set then it is user set,
# allow use of the default vars in the set PKI
if [ "$EASYRSA_PKI" ]; then
# EASYRSA_PKI will not be changed by vars
pki_vars="${EASYRSA_PKI}/vars"
else
unset -v easy_vars
# default pki/vars
# if this conflicts then bail
pki_vars="${PWD}/pki/vars"

# Setup "catch EXPECTED PKI changed"
# auto-load 'pki/vars' is FORBIDDEN to change PKI
expected_pki="${PWD}/pki"
fi

# vars of last resort
# vars of last resort; The Default
pwd_vars="$PWD/vars"

# Clear flags - This is the preferred order to find:
unset -v \
e_pki_vars e_easy_vars e_pwd_vars e_prog_vars \
e_pki_vars e_pwd_vars \
found_vars vars_in_pki

# PKI location, if present:
[ -e "$pki_vars" ] && e_pki_vars=1

# EASYRSA, if defined:
[ -e "$easy_vars" ] && e_easy_vars=1

# vars of last resort
[ -e "$pwd_vars" ] && e_pwd_vars=1

# program location:
[ -e "$prog_vars" ] && e_prog_vars=1

# Filter duplicates
if [ "$e_prog_vars" ] && [ "$e_pwd_vars" ] && \
[ "$prog_in_pwd" ]
then
unset -v prog_vars e_prog_vars
fi

# Allow only one vars to be found, No exceptions!
found_vars="$((
e_pki_vars + e_easy_vars + e_pwd_vars + e_prog_vars
e_pki_vars + e_pwd_vars
))"
verbose "vars_setup: found_vars = '$found_vars'"

Expand All @@ -5711,47 +5704,38 @@ The 'vars' file was not found:
1)
# If a SINGLE vars file is found
# then assign $vars
[ "$e_prog_vars" ] && vars="$prog_vars"
[ "$e_pwd_vars" ] && vars="$pwd_vars"
[ "$e_easy_vars" ] && vars="$easy_vars"
if [ "$e_pki_vars" ]; then
vars="$pki_vars"
vars_in_pki=1
user_error "\
Use of a default 'vars' file in the default PKI is prohibited.
Please move the 'pki/vars' file to the working directory:
* ${pwd_vars%/vars}/"
else
unset -v vars_in_pki
fi
;;
*)
found_msg=""
[ "$e_pki_vars" ] && \
found_msg="${NL} * Found: $pki_vars"
[ "$e_easy_vars" ] && \
found_msg="${found_msg}${NL} * Found: $easy_vars"
found_msg="${found_msg}${NL} * Found pki_vars : $pki_vars"
[ "$e_pwd_vars" ] && \
found_msg="${found_msg}${NL} * Found: $pwd_vars"
[ "$e_prog_vars" ] && \
found_msg="${found_msg}${NL} * Found: $prog_vars"
found_msg="${found_msg}${NL} * Found pwd_vars : $pwd_vars"

user_error "\
# If command is not 'help' etc then Error out
[ "$ignore_vars" ] || user_error "\
Conflicting 'vars' files found:
$found_msg

Priority should be given to this vars file:
* $pwd_vars"
Use option --vars=<FILE> to define the vars file
or remove the conflicting vars files.

# For init-pki, pki/vars will be deleted
# However, another vars file exists
# so don't create pki/vars
no_new_vars=1
verbose "vars_setup: no_new_vars = '$no_new_vars'"
esac
Easy-RSA recommends moving your vars file to your PKI and using
option --pki=<DIR>, which will auto-select the correct vars file."

verbose "vars_setup: Conflicting vars IGNORED"
esac
verbose "vars_setup: vars = '$vars'"

# Clean up
unset -v prog_vars pwd_vars easy_vars pki_vars \
expected_pki_vars
unset -v pwd_vars pki_vars
# END: Find vars
fi

Expand Down Expand Up @@ -5899,6 +5883,17 @@ Algorithm '$EASYRSA_ALGO' is invalid: Must be 'rsa', 'ec' or 'ed'"

set_var EASYRSA_MAX_TEMP 4

# Catch unexpected PKI change
if [ "$expected_pki" ]; then
[ "$expected_pki" = "$EASYRSA_PKI" ] || \
user_error "\
The PKI was unexpectedly changed by the vars file.

* vars : $vars
* Expected: $expected_pki
* Set : $EASYRSA_PKI"
fi

# if the vars file in use is not in the PKI
# and not user defined then Show the messages
if [ "$require_pki" ]; then
Expand Down Expand Up @@ -6131,16 +6126,6 @@ fi

# DO YOUR EDITS BELOW THIS POINT

# This variable is used as the base location of configuration files needed by
# easyrsa. More specific variables for specific files (eg: EASYRSA_SSL_CONF)
# may override this default.
#
# The default value of this variable is the location of the easyrsa script
# itself, which is also where the configuration files are located in the
# easy-rsa tree.
#
#set_var EASYRSA "${0%/*}"

# If your OpenSSL command is not in the system PATH, you will need to define
# the path here. Normally this means a full path to the executable, otherwise
# you could have left it undefined here and the shown default would be used.
Expand All @@ -6154,19 +6139,6 @@ fi
# This sample is in Windows syntax -- edit it for your path if not using PATH:
#set_var EASYRSA_OPENSSL "C:/Program Files/OpenSSL-Win32/bin/openssl.exe"

# Edit this variable to point to your soon-to-be-created key directory.
# By default, this will be "$PWD/pki" (ie: the "pki" subdirectory of the
# directory you are currently in).
#
# WARNING: init-pki will do a rm -rf on this directory so make sure you define
# it correctly! Interactive mode will prompt before acting.
#
#set_var EASYRSA_PKI "$PWD/pki"

# Define directory for temporary subdirectories.
#
#set_var EASYRSA_TEMP_DIR "$EASYRSA_PKI"

# Define X509 DN mode.
#
# This is used to adjust which elements are included in the Subject field
Expand Down Expand Up @@ -6253,6 +6225,10 @@ fi
# Cut-off window for checking expiring certificates.
#
#set_var EASYRSA_PRE_EXPIRY_WINDOW 90

# Define directory for temporary subdirectories.
#
#set_var EASYRSA_TEMP_DIR "$EASYRSA_PKI"
VARS_EXAMPLE
} # => create_vars_example()

Expand Down Expand Up @@ -7061,6 +7037,7 @@ unset -v \
alias_days \
prohibit_no_pass \
found_vars no_new_vars user_vars_true \
expected_pki \
do_build_full error_build_full_cleanup \
internal_batch \
easyrsa_exit_with_error error_info
Expand Down Expand Up @@ -7098,7 +7075,7 @@ while :; do
--enddate)
export EASYRSA_END_DATE="$val"
;;
--pki-dir)
--pki-dir|--pki)
export EASYRSA_PKI="$val"
;;
--tmp-dir)
Expand Down Expand Up @@ -7283,10 +7260,11 @@ cmd="$1"
# Establish PKI and CA initialisation requirements
# This avoids unnecessary warnings and notices
case "$cmd" in
init-pki|clean-all|\
help|-h|--help|--usage|\
show-host|\
version|upgrade|'')
''|help|-h|--help|--usage|version|upgrade|show-host)
unset -v require_pki require_ca
ignore_vars=1
;;
init-pki|clean-all)
unset -v require_pki require_ca
;;
*)
Expand Down

0 comments on commit 060299f

Please sign in to comment.