renaming remaining "device" entrys (#69)

* renaming remeining "device" entrys

* Update openshock-how-to-update.md

docs/guides/openshock-first-setup.md

@@ -6,7 +6,7 @@
 
 ## What you need
 
-- USB cable suitable for your device.
+- USB cable suitable for your Openshock hub.
 - A stable power source. Try to avoid cheap power bricks, they can cause the device to crash under certain loads.
 - A smartphone with a web browser (Chrome, Firefox etc.)
 - [OpenShock hub](../hardware/boards/index.md)
@@ -83,4 +83,4 @@
     If you need additional help, join our [Discord](https://discord.gg/OpenShock)
 
 !!! Info
-    Your shocker will remember the device, there is no need to pair it every time.
+    Your shocker will remember the hub, there is no need to pair it every time.

docs/guides/openshock-how-to-flash-your-board.md

@@ -13,7 +13,7 @@
 1. Plug your hub into your PC using a USB cable.
 2. Open the [Flashtool](https://next.openshock.app/flashtool).
 3. Click "Select Device" and select your hub in the Popup window.  
-If your Device is not showing up click on "Install Drivers", after that repeat this step.
+If your hub is not showing up click on "Install Drivers", after that repeat this step.
 ![Connect Controller](../static/guides/how-to-flash/Connect_Device_Flashtoolguide.png)
 4. Ensure you have the "Stable" channel selected.
 5. Ensure the correct board is selected.

docs/guides/openshock-how-to-update.md

@@ -2,9 +2,9 @@
 
 ## What you need
 
-- [Fully setup Device](../guides/openshock-first-setup.md)
+- [Fully setup Openshock hub](../guides/openshock-first-setup.md)
 - [OpenShock account](https://openshock.app/)
-- **OpenShock Firmware 1.1.0 or newer**
+- [**OpenShock Firmware 1.1.0 or newer**](https://github.com/OpenShock/Firmware)
 
 ## Over the Air Update (Recommended)