Create 0.20mm PETG @elegoo Neptune4 (0.4 nozzle)-OpenNept4une.json

src/profiles/processes/0.20mm PETG @Elegoo Neptune4 (0.4 nozzle)-OpenNept4une.json

@@ -0,0 +1,77 @@
+{
+    "accel_to_decel_enable": "0",
+    "bottom_shell_layers": "4",
+    "bottom_shell_thickness": "0",
+    "bridge_speed": "50",
+    "brim_width": "4",
+    "default_acceleration": "3000",
+    "default_jerk": "5",
+    "elefant_foot_compensation": "0",
+    "ensure_vertical_shell_thickness": "ensure_all",
+    "from": "User",
+    "gap_infill_speed": "45",
+    "independent_support_layer_height": "0",
+    "infill_anchor": "2.7",
+    "infill_anchor_max": "10",
+    "infill_jerk": "5",
+    "inherits": "0.20mm Standard @Elegoo Neptune4 (0.4 nozzle)",
+    "initial_layer_acceleration": "500",
+    "initial_layer_infill_speed": "50",
+    "initial_layer_jerk": "5",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_min_bead_width": "80%",
+    "initial_layer_print_height": "0.28",
+    "initial_layer_travel_speed": "80%",
+    "inner_wall_jerk": "5",
+    "inner_wall_speed": "100",
+    "internal_bridge_speed": "50",
+    "internal_solid_infill_speed": "100",
+    "is_custom_defined": "0",
+    "max_travel_detour_distance": "2",
+    "minimum_sparse_infill_area": "15",
+    "name": "0.20mm PETG @Elegoo Neptune4 (0.4 nozzle)-OpenNept4une",
+    "outer_wall_jerk": "5",
+    "outer_wall_speed": "80",
+    "overhang_reverse": "1",
+    "overhang_reverse_internal_only": "1",
+    "overhang_reverse_threshold": "0%",
+    "print_settings_id": "0.20mm PETG @Elegoo Neptune4 (0.4 nozzle)-OpenNept4une",
+    "raft_first_layer_expansion": "3",
+    "reduce_crossing_wall": "1",
+    "reduce_infill_retraction": "0",
+    "resolution": "0.0125",
+    "seam_gap": "0",
+    "seam_slope_conditional": "1",
+    "seam_slope_min_length": "10",
+    "seam_slope_type": "external",
+    "skirt_distance": "6",
+    "skirt_height": "1",
+    "skirt_loops": "2",
+    "slow_down_layers": "2",
+    "small_area_infill_flow_compensation": "1",
+    "small_perimeter_speed": "0",
+    "sparse_infill_pattern": "cubic",
+    "sparse_infill_speed": "100",
+    "support_base_pattern_spacing": "2.5",
+    "support_critical_regions_only": "1",
+    "support_interface_bottom_layers": "3",
+    "support_interface_pattern": "rectilinear",
+    "support_interface_spacing": "0.5",
+    "support_interface_top_layers": "3",
+    "support_line_width": "0.4",
+    "support_on_build_plate_only": "1",
+    "support_remove_small_overhang": "0",
+    "support_speed": "100",
+    "support_style": "snug",
+    "support_threshold_angle": "35",
+    "top_shell_layers": "5",
+    "top_shell_thickness": "0",
+    "top_surface_acceleration": "3000",
+    "top_surface_jerk": "5",
+    "top_surface_line_width": "0.4",
+    "top_surface_speed": "80",
+    "travel_acceleration": "3000",
+    "travel_jerk": "5",
+    "travel_speed": "200",
+    "version": "1.9.0.2"
+}