Add try/except to wind rose loader

examples/examples_control_types/004_helix_active_wake_mixing.py

@@ -0,0 +1,160 @@
+# Copyright 2024 NREL
+
+# Licensed under the Apache License, Version 2.0 (the "License"); you may not
+# use this file except in compliance with the License. You may obtain a copy of
+# the License at http://www.apache.org/licenses/LICENSE-2.0
+
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+# License for the specific language governing permissions and limitations under
+# the License.
+
+# See https://floris.readthedocs.io for documentation
+
+import matplotlib.pyplot as plt
+import numpy as np
+import yaml
+
+import floris.flow_visualization as flowviz
+from floris import FlorisModel
+
+
+"""
+Example to test out using helix wake mixing of upstream turbines.
+Helix wake mixing is turned on at turbine 1, off at turbines 2 to 4;
+Turbine 2 is in wake turbine 1, turbine 4 in wake of turbine 3.
+"""
+
+# Grab model of FLORIS and update to awc-enabled turbines
+fmodel = FlorisModel("../inputs/emgauss_helix.yaml")
+fmodel.set_operation_model("awc")
+
+# Set the wind directions and speeds to be constant over N different helix amplitudes
+N = 1
+awc_modes = np.array(["helix", "baseline", "baseline", "baseline"]).reshape(4, N).T
+awc_amplitudes = np.array([2.5, 0, 0, 0]).reshape(4, N).T
+
+# Create 4 WT WF layout with lateral offset of 3D and streamwise offset of 4D
+D = 240
+fmodel.set(
+    layout_x=[0.0, 4*D, 0.0, 4*D],
+    layout_y=[0.0, 0.0, -3*D, -3*D],
+    wind_directions=270 * np.ones(N),
+    wind_speeds=8.0 * np.ones(N),
+    turbulence_intensities=0.06*np.ones(N),
+    awc_modes=awc_modes,
+    awc_amplitudes=awc_amplitudes
+)
+fmodel.run()
+turbine_powers = fmodel.get_turbine_powers()
+
+# Plot the flow fields for T1 awc_amplitude = 2.5
+horizontal_plane = fmodel.calculate_horizontal_plane(
+    x_resolution=200,
+    y_resolution=100,
+    height=150.0,
+    awc_modes=awc_modes,
+    awc_amplitudes=awc_amplitudes
+)
+
+y_plane_baseline = fmodel.calculate_y_plane(
+    x_resolution=200,
+    z_resolution=100,
+    crossstream_dist=0.0,
+    awc_modes=awc_modes,
+    awc_amplitudes=awc_amplitudes
+)
+y_plane_helix = fmodel.calculate_y_plane(
+    x_resolution=200,
+    z_resolution=100,
+    crossstream_dist=-3*D,
+    awc_modes=awc_modes,
+    awc_amplitudes=awc_amplitudes
+)
+
+cross_plane = fmodel.calculate_cross_plane(
+    y_resolution=100,
+    z_resolution=100,
+    downstream_dist=720.0,
+    awc_modes=awc_modes,
+    awc_amplitudes=awc_amplitudes
+)
+
+# Create the plots
+fig, ax_list = plt.subplots(2, 2, figsize=(10, 8), tight_layout=True)
+ax_list = ax_list.flatten()
+flowviz.visualize_cut_plane(
+    horizontal_plane,
+    ax=ax_list[0],
+    label_contours=True,
+    title="Horizontal"
+)
+flowviz.visualize_cut_plane(
+    cross_plane,
+    ax=ax_list[2],
+    label_contours=True,
+    title="Spanwise profile at 3D"
+)
+
+# fig2, ax_list2 = plt.subplots(2, 1, figsize=(10, 8), tight_layout=True)
+# ax_list2 = ax_list2.flatten()
+flowviz.visualize_cut_plane(
+    y_plane_baseline,
+    ax=ax_list[1],
+    label_contours=True,
+    title="Streamwise profile, helix"
+)
+flowviz.visualize_cut_plane(
+    y_plane_helix,
+    ax=ax_list[3],
+    label_contours=True,
+    title="Streamwise profile, baseline"
+)
+
+# Calculate the effect of changing awc_amplitudes
+N = 50
+awc_amplitudes = np.array([
+    np.linspace(0, 5, N),
+    np.zeros(N), np.zeros(N), np.zeros(N)
+    ]).reshape(4, N).T
+
+# Reset FlorisModel for different helix amplitudes
+fmodel.set(
+    wind_directions=270 * np.ones(N),
+    wind_speeds=8 * np.ones(N),
+    turbulence_intensities=0.06*np.ones(N),
+    awc_modes=awc_modes,
+    awc_amplitudes=awc_amplitudes
+    )
+fmodel.run()
+turbine_powers = fmodel.get_turbine_powers()
+
+# Plot the power as a function of helix amplitude
+fig_power, ax_power = plt.subplots()
+ax_power.fill_between(
+    awc_amplitudes[:, 0],
+    0,
+    turbine_powers[:, 0]/1000,
+    color='C0',
+    label='Turbine 1'
+    )
+ax_power.fill_between(
+    awc_amplitudes[:, 0],
+    turbine_powers[:, 0]/1000,
+    turbine_powers[:, :2].sum(axis=1)/1000,
+    color='C1',
+    label='Turbine 2'
+    )
+ax_power.plot(
+    awc_amplitudes[:, 0],
+    turbine_powers[:,:2].sum(axis=1)/1000,
+    color='k',
+    label='Farm'
+    )
+
+ax_power.set_xlabel("Upstream turbine helix amplitude [deg]")
+ax_power.set_ylabel("Power [kW]")
+ax_power.legend()
+
+flowviz.show()

examples/inputs/cc.yaml

@@ -49,6 +49,7 @@ wake:
   enable_secondary_steering: true
   enable_yaw_added_recovery: true
   enable_transverse_velocities: true
+  enable_active_wake_mixing: false
 
   wake_deflection_parameters:
     gauss:

examples/inputs/emgauss.yaml

@@ -48,6 +48,7 @@ wake:
 
   enable_secondary_steering: false
   enable_yaw_added_recovery: true
+  enable_active_wake_mixing: false
   enable_transverse_velocities: false
 
   wake_deflection_parameters:

examples/inputs/emgauss_helix.yaml

@@ -0,0 +1,109 @@
+
+name: Emperical Gaussian
+description: Three turbines using empirical Gaussian model
+floris_version: v4.0
+
+logging:
+  console:
+    enable: true
+    level: WARNING
+  file:
+    enable: false
+    level: WARNING
+
+solver:
+  type: turbine_grid
+  turbine_grid_points: 3
+
+farm:
+  layout_x:
+  - 0.0
+  - 630.0
+  - 1260.0
+  layout_y:
+  - 0.0
+  - 0.0
+  - 0.0
+  turbine_type:
+  - iea_15MW
+
+flow_field:
+  air_density: 1.225
+  reference_wind_height: -1 # -1 is code for use the hub height
+  turbulence_intensities:
+  - 0.06
+  wind_directions:
+  - 270.0
+  wind_shear: 0.12
+  wind_speeds:
+  - 8.0
+  wind_veer: 0.0
+
+wake:
+  model_strings:
+    combination_model: sosfs
+    deflection_model: empirical_gauss
+    turbulence_model: wake_induced_mixing
+    velocity_model: empirical_gauss
+
+  enable_secondary_steering: false
+  enable_yaw_added_recovery: false
+  enable_active_wake_mixing: true
+  enable_transverse_velocities: false
+
+  wake_deflection_parameters:
+    gauss:
+      ad: 0.0
+      alpha: 0.58
+      bd: 0.0
+      beta: 0.077
+      dm: 1.0
+      ka: 0.38
+      kb: 0.004
+    jimenez:
+      ad: 0.0
+      bd: 0.0
+      kd: 0.05
+    empirical_gauss:
+      horizontal_deflection_gain_D: 3.0
+      vertical_deflection_gain_D: -1
+      deflection_rate: 30
+      mixing_gain_deflection: 0.0
+      yaw_added_mixing_gain: 0.0
+
+  wake_velocity_parameters:
+    cc:
+      a_s: 0.179367259
+      b_s: 0.0118889215
+      c_s1: 0.0563691592
+      c_s2: 0.13290157
+      a_f: 3.11
+      b_f: -0.68
+      c_f: 2.41
+      alpha_mod: 1.0
+    gauss:
+      alpha: 0.58
+      beta: 0.077
+      ka: 0.38
+      kb: 0.004
+    jensen:
+      we: 0.05
+    empirical_gauss:
+      wake_expansion_rates:
+      - 0.023
+      - 0.008
+      breakpoints_D:
+      - 10
+      sigma_0_D: 0.28
+      smoothing_length_D: 2.0
+      mixing_gain_velocity: 2.0
+      awc_wake_exp: 1.2
+      awc_wake_denominator: 400
+  wake_turbulence_parameters:
+    crespo_hernandez:
+      initial: 0.1
+      constant: 0.5
+      ai: 0.8
+      downstream: -0.32
+    wake_induced_mixing:
+      atmospheric_ti_gain: 0.0

examples/inputs/gch.yaml

@@ -178,6 +178,10 @@ wake:
   # Can be "true" or "false".
   enable_yaw_added_recovery: true
 
+  ###
+  # Can be "true" or "false".
+  enable_active_wake_mixing: false
+
   ###
   # Can be "true" or "false".
   enable_transverse_velocities: true

examples/inputs/gch_heterogeneous_inflow.yaml

@@ -62,6 +62,7 @@ wake:
   enable_secondary_steering: true
   enable_yaw_added_recovery: true
   enable_transverse_velocities: true
+  enable_active_wake_mixing: false
 
   wake_deflection_parameters:
     gauss:

examples/inputs/gch_multi_dim_cp_ct.yaml

@@ -52,6 +52,7 @@ wake:
   enable_secondary_steering: true
   enable_yaw_added_recovery: true
   enable_transverse_velocities: true
+  enable_active_wake_mixing: false
 
   wake_deflection_parameters:
     gauss:

examples/inputs/gch_multiple_turbine_types.yaml

@@ -48,6 +48,7 @@ wake:
   enable_secondary_steering: false
   enable_yaw_added_recovery: false
   enable_transverse_velocities: false
+  enable_active_wake_mixing: false
 
   wake_deflection_parameters:
     gauss:

examples/inputs/jensen.yaml

@@ -49,6 +49,7 @@ wake:
   enable_secondary_steering: false
   enable_yaw_added_recovery: false
   enable_transverse_velocities: false
+  enable_active_wake_mixing: false
 
   wake_deflection_parameters:
     gauss:

examples/inputs/turbopark.yaml

@@ -49,6 +49,7 @@ wake:
   enable_secondary_steering: false
   enable_yaw_added_recovery: false
   enable_transverse_velocities: false
+  enable_active_wake_mixing: false
 
   wake_deflection_parameters:
     gauss:

examples/inputs_floating/emgauss_fixed.yaml

@@ -49,6 +49,7 @@ wake:
   enable_secondary_steering: false
   enable_yaw_added_recovery: true
   enable_transverse_velocities: false
+  enable_active_wake_mixing: false
 
   wake_deflection_parameters:
     gauss:

examples/inputs_floating/emgauss_floating.yaml

@@ -49,6 +49,7 @@ wake:
   enable_secondary_steering: false
   enable_yaw_added_recovery: true
   enable_transverse_velocities: false
+  enable_active_wake_mixing: false
 
   wake_deflection_parameters:
     gauss:

examples/inputs_floating/emgauss_floating_fixedtilt15.yaml

@@ -45,6 +45,7 @@ wake:
   enable_secondary_steering: false
   enable_yaw_added_recovery: true
   enable_transverse_velocities: false
+  enable_active_wake_mixing: false
 
   wake_deflection_parameters:
     gauss:

examples/inputs_floating/emgauss_floating_fixedtilt5.yaml

@@ -45,6 +45,7 @@ wake:
   enable_secondary_steering: false
   enable_yaw_added_recovery: true
   enable_transverse_velocities: false
+  enable_active_wake_mixing: false
 
   wake_deflection_parameters:
     gauss:

examples/inputs_floating/gch_fixed.yaml

@@ -45,6 +45,7 @@ wake:
   enable_secondary_steering: true
   enable_yaw_added_recovery: true
   enable_transverse_velocities: true
+  enable_active_wake_mixing: false
 
   wake_deflection_parameters:
     gauss:

examples/inputs_floating/gch_floating.yaml

@@ -46,6 +46,7 @@ wake:
   enable_secondary_steering: true
   enable_yaw_added_recovery: true
   enable_transverse_velocities: true
+  enable_active_wake_mixing: false
 
   wake_deflection_parameters:
     gauss:

examples/inputs_floating/gch_floating_defined_floating.yaml

@@ -45,6 +45,7 @@ wake:
   enable_secondary_steering: true
   enable_yaw_added_recovery: true
   enable_transverse_velocities: true
+  enable_active_wake_mixing: false
 
   wake_deflection_parameters:
     gauss: