Added detector file for LZ's First Science Run (SR1) (#161)

* Added detector file for LZ's First Science Run (SR1)

* Removed virtual declaration of functions in LZ_SR1.hh

include/Detectors/LZ_SR1.hh

@@ -0,0 +1,250 @@
+//
+// LZ_SR1.hh
+//
+// Adapted from Quentin Riffard and Jacob Cutter by Greg Rischbieter, June 2022
+//
+// This file serves as a NEST input to reproduce LZ's SR1 result
+//
+// Please reach out to Greg Rischbieter ([email protected]) and/or
+// Matthew Szydagis ([email protected]) with any questions.
+//
+//////////////////////////////  IMPORTANT !!
+/////////////////////////////////////////
+//  To match our calibration data, we needed to reduce the ER and NR band
+//  widths. To make these changes in your copy of NEST, make sure NEST.cpp is
+//  calling an edited NRERWidthsParams vector when using the GetQuanta(...)
+//  function: {0.4.,0.4.,0.04,0.5,0.19,2.25, 0.0015, 0.046452, 0.205, 0.45,
+//  -0.2};
+//
+//  If using execNEST to simulate results, these changes can be made manually
+//  to execNEST.cpp at lines 183-194 in NESTv2.3.7
+//
+//  Additonally, we disabled skewed-recombination to better match our tritium
+//  data To make this change in v2.3.7 or earlier, replace lines 353-358 of
+//  NEST.cpp with "skewness = 0.0;"
+//
+//  as of NESTv2.3.8, the GetQuanta(...) function takes skewness to be a
+//  function input. If using this version of NEST, simply make sure GetQuanta
+//  uses "skewnessER = 0.0" for ER simulations (this variable is the last
+//  argument to GetQuanta).
+///////////////////////////////////////////////////////////////////////////////////
+//
+//  To add this file into execNEST, make sure it is copied into the directory
+//                        nest/include/Detectors/
+//  and add the line ' #include "LZ_SR1.hh" ' , and make sure the "auto
+//  detector" variable is the "LZ_Detector()" object, as opposed to the LUX
+//  default. You may also want to remove the few lines of LUX-detector comments
+//  between lines 42-45 of execNEST.cpp
+////////////////////////////////////////////////////////////////////////////////////
+
+#ifndef LZ_Detector_hh
+#define LZ_Detector_hh 1
+
+#include "VDetector.hh"
+
+using namespace std;
+
+class LZ_Detector : public VDetector {
+public:
+  LZ_Detector() {
+    // Call the initialisation of all the parameters
+    Initialization();
+  };
+  ~LZ_Detector() override = default;
+
+  // Do here the initialization of all the parameters that are not varying as a
+  // function of time
+  void Initialization() override {
+    // Primary Scintillation (S1) parameters
+    g1 = 0.113569; // 0.114 +/- 0.002  // phd per S1 phot at dtCntr (not phe).
+                   // Divide out 2-PE effect
+    sPEres = 0.31; // single phe resolution (Gaussian assumed)
+    sPEthr = 0.10; // POD threshold in phe, usually used IN PLACE of sPEeff
+    sPEeff = 1.0;  // actual efficiency, can be used in lieu of POD threshold
+    noiseBaseline[0] = 0.0; // baseline noise mean and width in PE (Gaussian)
+    noiseBaseline[1] = 0.0; // baseline noise mean and width in PE (Gaussian)
+    noiseBaseline[2] = 0.;
+    noiseBaseline[3] = 0.;
+    P_dphe = 0.214; // chance 1 photon makes 2 phe instead of 1 in Hamamatsu PMT
+
+    coinWind = 300; // S1 coincidence window in ns
+    coinLevel = 3;  // how many PMTs have to fire for an S1 to count
+    numPMTs = 484;  // Taking into account turned-off PMTs    // For coincidence
+                   // calculation
+
+    OldW13eV = true;
+    noiseLinear[0] = 0.;
+    noiseLinear[1] = 0.;
+
+    // Ionization and Secondary Scintillation (S2) parameters
+    g1_gas = 0.092103545; // 0.092 +/- 0.002 // phd per S2 photon in gas, used
+                          // to get SE size
+    s2Fano = 2.0;         // Fano-like fudge factor for SE width
+    s2_thr =
+        600. *
+        (1.0 +
+         P_dphe); // the S2 threshold in phe or PE, *not* phd. Affects NR most
+    E_gas = 8.42417;  // field in kV/cm between liquid/gas border and anode
+    eLife_us = 6500.; // the drift electron mean lifetime in micro-seconds
+
+    // Thermodynamic Properties
+    inGas = false;
+    T_Kelvin = 174.1; // for liquid drift speed calculation
+    p_bar = 1.79;     // gas pressure in units of bars, it controls S2 size
+    // if you are getting warnings about being in gas, lower T and/or raise p
+
+    // Data Analysis Parameters and Geometry
+    dtCntr = 462.5; // central correction bin is between 425-500us // center of
+                    // detector for S1 corrections, in usec.
+    dt_min = 86.;   // minimum. Top of detector fiducial volume
+    dt_max = 936.5; // maximum. Bottom of detector fiducial volume
+
+    radius = 688.; // millimeters (fiducial radius)
+    radmax = 728.; // actual physical geo. limit
+
+    TopDrift = 1461.; // mm not cm or us (but, this *is* where dt=0)
+    // a z-axis value of 0 means the bottom of the detector (cathode OR bottom
+    // PMTs)
+    // In 2-phase, TopDrift=liquid/gas border. In gas detector it's GATE, not
+    // anode!
+    anode = 1469.; // the level of the anode grid-wire plane in mm
+    // In a gas TPC, this is not TopDrift (top of drift region), but a few mm
+    // above it
+    gate = 1456.; // mm. This is where the E-field changes (higher)
+    // in gas detectors, the gate is still the gate, but it's where S2 starts
+    cathode = 0.; // mm. Defines point below which events are gamma-X
+
+    // 2-D (X & Y) Position Reconstruction
+    // Set these to zero to implement "perfect" position corrections
+    // Note: LZ used spatial maps to implement S1 and S2 corrections,
+    // but for simplicity with this header file, we'll circumvent
+    // the need for corrections entirely.
+    PosResExp = 0.0;  // exp increase in pos recon res at hi r, 1/mm
+    PosResBase = 0.0; // baseline unc in mm, see NEST.cpp for usage
+  }
+
+  double FitS1(double xPos_mm, double yPos_mm, double zPos_mm,
+               LCE map) override {
+    return 1.0;
+  }
+
+  // Drift electric field as function of Z in mm
+  double FitEF(double xPos_mm, double yPos_mm,
+               double zPos_mm) override { // in V/cm
+    return 192.;
+  }
+
+  double FitS2(double xPos_mm, double yPos_mm, LCE map) override { return 1.0; }
+
+  vector<double> FitTBA(double xPos_mm, double yPos_mm,
+                        double zPos_mm) override {
+    vector<double> BotTotRat(2);
+
+    BotTotRat[0] = 0.6;   // S1 bottom-to-total ratio
+    BotTotRat[1] = 0.323; // S2 bottom-to-total ratio, typically only used for
+                          // position recon (1-this)
+
+    return BotTotRat;
+  }
+
+  // The following functions were not used in LZ's SR1, and are copied from the
+  // public NEST
+  // file for LUX, just so NEST has them available to prevent errors.
+  double OptTrans(double xPos_mm, double yPos_mm, double zPos_mm) override {
+    double phoTravT, approxCenter = (TopDrift + cathode) / 2.,
+                     relativeZ = zPos_mm - approxCenter;
+
+    double A = 0.048467 - 7.6386e-6 * relativeZ +
+               1.2016e-6 * pow(relativeZ, 2.) - 6.0833e-9 * pow(relativeZ, 3.);
+    if (A < 0.)
+      A = 0.; // cannot have negative probability
+    double B_a = 0.99373 + 0.0010309 * relativeZ -
+                 2.5788e-6 * pow(relativeZ, 2.) -
+                 1.2000e-8 * pow(relativeZ, 3.);
+    double B_b = 1. - B_a;
+    double tau_a = 11.15; // all times in nanoseconds
+    double tau_b = 4.5093 + 0.03437 * relativeZ -
+                   0.00018406 * pow(relativeZ, 2.) -
+                   1.6383e-6 * pow(relativeZ, 3.);
+    if (tau_b < 0.)
+      tau_b = 0.; // cannot have negative time
+
+    // A = 0.0574; B_a = 1.062; tau_a = 11.1; tau_b = 2.70; B_b = 1.0 - B_a;
+    // //LUX D-D conditions
+
+    if (RandomGen::rndm()->rand_uniform() < A)
+      phoTravT = 0.; // direct travel time to PMTs (low)
+    else {           // using P0(t) =
+           // A*delta(t)+(1-A)*[(B_a/tau_a)e^(-t/tau_a)+(B_b/tau_b)e^(-t/tau_b)]
+           // LUX PSD paper, but should apply to all detectors w/ diff #'s
+      if (RandomGen::rndm()->rand_uniform() < B_a)
+        phoTravT = -tau_a * log(RandomGen::rndm()->rand_uniform());
+      else
+        phoTravT = -tau_b * log(RandomGen::rndm()->rand_uniform());
+    }
+
+    double sig = RandomGen::rndm()->rand_gauss(
+        3.84, .09); // includes stat unc but not syst
+    phoTravT += RandomGen::rndm()->rand_gauss(
+        0.00, sig); // the overall width added to photon time spectra by the
+                    // effects in the electronics and the data reduction
+                    // pipeline
+
+    if (phoTravT > DBL_MAX)
+      phoTravT = tau_a;
+    if (phoTravT < -DBL_MAX)
+      phoTravT = 0.000;
+
+    return phoTravT; // this function follows LUX (arXiv:1802.06162) not Xe10
+                     // technically but tried to make general
+  }
+
+  vector<double> SinglePEWaveForm(double area, double t0) override {
+    vector<double> PEperBin;
+
+    double threshold = PULSEHEIGHT; // photo-electrons
+    double sigma = PULSE_WIDTH;     // ns
+    area *= 10. * (1. + threshold);
+    double amplitude = area / (sigma * sqrt(2. * M_PI)),
+           signal; // assumes perfect Gaussian
+
+    double tStep1 = SAMPLE_SIZE / 1e2; // ns, make sure much smaller than
+                                       // sample size; used to generate MC-true
+                                       // pulses essentially
+    double tStep2 =
+        SAMPLE_SIZE; // ns; 1 over digitization rate, 100 MHz assumed here
+
+    double time = -5. * sigma;
+    bool digitizeMe = false;
+    while (true) {
+      signal = amplitude * exp(-pow(time, 2.) / (2. * sigma * sigma));
+      if (signal < threshold) {
+        if (digitizeMe)
+          break;
+        else
+          ; // do nothing - goes down to advancing time block
+      } else {
+        if (digitizeMe)
+          PEperBin.push_back(signal);
+        else {
+          if (RandomGen::rndm()->rand_uniform() < 2. * (tStep1 / tStep2)) {
+            PEperBin.push_back(time + t0);
+            PEperBin.push_back(signal);
+            digitizeMe = true;
+          } else {
+          }
+        }
+      }
+      if (digitizeMe)
+        time += tStep2;
+      else
+        time += tStep1;
+      if (time > 5. * sigma)
+        break;
+    }
+
+    return PEperBin;
+  }
+};
+
+#endif