Tiny-T is a Voron Trident with build volume 150mm^3.
Source: https://github.com/VoronDesign/Voron-Trident
Sample config: https://github.com/DoubleT-PrinterConfigs/TinyTConfig
License: License
Changes: Tiny-T "branding" and scale modelling down.
- With the addition of the tophat, the vertical extrusions are now back to 400mm, according to Trident specifications
- Side, Front and Rear panels have reduced their height by also 25mm
- Single front door
- New door hinges and handles
- New rear panel with mounting holes for the air filter
- New bed design that support M3 screws to hold the build plate aligned
Important: if ordering panels from vendors, make sure they are using the latest DXF files
If ordering from Misumi, these are the specs:
Misumi HFSB5-2020-400-LCP-RCP-AV260 4 (corner extrusion)
Misumi HFSB5-2020-270-TPW 9 (top, bottom, front[top/bottom], rear top extrusions)
Misumi HFSB5-2020-270-AH135-TPW 1 (rear bottom extrusion)
Misumi HFSB5-2020-230-LTP 1 (rear Z extrusion)
Misumi HFSB5-2020-230 1 (x gantry extrusion)
Misumi HFSB5-2020-140 1 (rear gantry extrusion)
Misumi HFSB5-2020-270-AH135 1 (bed extrusion)
Misumi HFSB5-2020-132-LTP 1 (bed extrusion)
- 2x 1200mm (120cm) GATE belts
- 6x Linear Rail MGN9H 200mm - Ali Express
- 150mmx150mm bed - Mandala Roseworks
- 150mm PEI Flex build plate - Ali Express
- 120mmx120mm 120w 24v heating pad - Keenovo
- LDO Orbiter Extruder kit - Fabreeko OR LDO Galileo Clockwork kit - Fabreeko
- 2x LDO NEMA 17 stepper motors - Printed Solid
- 3x V0.1 Z Stepper motor with 150mm lead screw - Fabreeko
- 3x GE5C bearings - Deep Fried Hero, Ali Express
- FYSETC V2.1 RGB Mini 12864 - Amazon
- Amplifier Cabinet - Amazon, Ali Express
- Boop by
Yeri - RSCS by
DerpimusandDoubleT - Panel Support Clips by
wile-e - Tophat by
jakub874