ADI MAX78000/MAX78002 Model Training and Synthesis

June 25, 2024

Note: This branch is compatible with PyTorch 1.8. Please go to the “pytorch-2” branch for PyTorch 2.3 compatibility.

ADI’s MAX78000/MAX78002 project is comprised of five repositories:

Start here: Top Level Documentation
The software development kit (MSDK), which contains drivers and example programs ready to run on the evaluation kits (EVkit and Feather): Analog Devices MSDK
The training repository, which is used for deep learning model development and training: ai8x-training (described in this document)
The synthesis repository, which is used to convert a trained model into C code using the “izer” tool: ai8x-synthesis (described in this document)
The reference design repository, which contains host applications and sample applications for reference designs such as MAXREFDES178 (Cube Camera): refdes Note: Examples for EVkits and Feather boards are part of the MSDK

Open the .md version of this file in a markdown enabled viewer, for example Typora (http://typora.io). See https://github.com/adam-p/markdown-here/wiki/Markdown-Cheatsheet for a description of Markdown. A PDF copy of this file is available in this repository. The GitHub rendering of this document does not show the mathematical formulas. Use the ≡ button to access the table of contents on GitHub.

[TOC]

Part Numbers

This document covers several of ADI’s ultra-low power machine learning accelerator systems. They are sometimes referred to by their die types. The following shows the die types and their corresponding part numbers:

Die Type	Part Number(s)
AI84	Unreleased test chip
AI85	MAX78000 (full production)
AI87	MAX78002 (full production)

Overview

The following graphic shows an overview of the development flow:

Installation

File System Layout

Including the MSDK, the expected/resulting file system layout will be:

..../ai8x-training/
..../ai8x-synthesis/
..../ai8x-synthesis/sdk/ [or a different path selected by the user]

where “....” is the project root, for example ~/Documents/Source/AI.

Prerequisites

This software requires PyTorch. TensorFlow / Keras support is deprecated.

PyTorch operating system and hardware support are constantly evolving. This document does not cover all possible combinations of operating system and hardware. Instead, this document describes how to install PyTorch on one officially supported platform.

Platform Recommendation and Full Support

Full support and documentation are provided for the following platform:

CPU: 64-bit amd64/x86_64 “PC” with Ubuntu Linux 20.04 LTS or 22.04 LTS
GPU for hardware acceleration (optional but highly recommended): Nvidia with CUDA 11
PyTorch 1.8.1 (LTS) on Python 3.8.x. Please use the “pytorch-2” branch for PyTorch 2.3 compatibility.

Limited support and advice for using other hardware and software combinations is available as follows.

Operating System Support

Linux

The only officially supported platforms for model training are Ubuntu Linux 20.04 LTS and 22.04 LTS on amd64/x86_64, either the desktop or the server version.

Note that hardware acceleration using CUDA is not available in PyTorch for Raspberry Pi 4 and other aarch64/arm64 devices, even those running Ubuntu Linux 20.04/22.04. See also Development on Raspberry Pi 4 and 400 (unsupported).

This document also provides instructions for installing on RedHat Enterprise Linux / CentOS 8 with limited support.

Windows

On Windows 10 version 21H2 or newer, and Windows 11, after installing the Windows Subsystem for Linux (WSL2), Ubuntu Linux 20.04 or 22.04 can be used inside Windows with full CUDA acceleration, please see Windows Subsystem for Linux. For the remainder of this document, follow the steps for Ubuntu Linux.

If WSL2 is not available, it is also possible (but not recommended due to inherent compatibility issues and slightly degraded performance) to run this software natively on Windows. Please see Native Windows Installation.

macOS

The software works on macOS, but model training suffers from the lack of hardware acceleration.

Virtual Machines (Unsupported)

This software works inside a virtual machine running Ubuntu Linux 20.04 or 22.04. However, GPU passthrough is potentially difficult to set up and not always available for Linux VMs, so there may be no CUDA hardware acceleration. Certain Nvidia cards support vGPU software; see also vGPUs and CUDA, but vGPU features may come at substantial additional cost and vGPU software is not covered by this document.

Docker Containers (Unsupported)

This software also works inside Docker containers. However, CUDA support inside containers requires Nvidia Docker (see blog entry) and is not covered by this document.

PyTorch and Python

The officially supported version of PyTorch is 1.8.1 (LTS) running on Python 3.8.x. Newer versions will typically work, but are not covered by support, documentation, and installation scripts.

Hardware Acceleration

When going beyond simple models, model training does not work well without CUDA hardware acceleration. The network loader (“izer”) does not require CUDA, and very simple models can also be trained on systems without CUDA.

CUDA requires Nvidia GPUs.
There is a PyTorch pre-release with ROCm acceleration for certain AMD GPUs on Linux (see blog entry), but this is not currently covered by the installation instructions in this document, and it is not supported.
At this time, there is neither CUDA nor ROCm nor Neural Engine support on macOS, and therefore no hardware acceleration (there is a pre-release version of PyTorch with M1 acceleration on macOS 12.3 or later, and M1 acceleration will be supported in a future release of these tools).
PyTorch does not include CUDA support for aarch64/arm64 systems. Rebuilding PyTorch from source is not covered by this document.

Using Multiple GPUs

When using multiple GPUs (graphics cards), the software will automatically use all available GPUs and distribute the workload. To prevent this (for example, when the GPUs are not balanced), set the CUDA_VISIBLE_DEVICES environment variable. Use the --gpus command line argument to set the default GPU.

Shared (Multi-User) and Remote Systems

On a shared (multi-user) system that has previously been set up, only local installation is needed. CUDA and any apt-get or brew tasks are not necessary, with the exception of the CUDA Environment Setup.

The screen command (or alternatively, the more powerful tmux) can be used inside a remote terminal to disconnect a session from the controlling terminal, so that a long running training session doesn’t abort due to network issues, or local power saving. In addition, screen can log all console output to a text file.

Example:

$ ssh targethost
targethost$ screen -L # or screen -r to resume, screen -list to list
targethost$
Ctrl+A,D to disconnect

man screen and man tmux describe the software in more detail.

Additional Software

The following software is optional, and can be replaced with other similar software of the user’s choosing.

Code Editor Visual Studio Code, https://code.visualstudio.com or the VSCodium version, https://vscodium.com, with the “Remote - SSH” plugin; to use Visual Studio Code on Windows as a full development environment (including debug), see https://github.com/analogdevicesinc/VSCode-Maxim Sublime Text, https://www.sublimetext.com
Markdown Editor Typora, http://typora.io
Serial Terminal CoolTerm, http://freeware.the-meiers.org Serial, https://apps.apple.com/us/app/serial/id877615577?mt=12 Putty, https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html Tera Term, https://osdn.net/projects/ttssh2/releases/
Graphical Git Client GitHub Desktop, https://desktop.github.com Git Fork, https://git-fork.com
Diff and Merge Tool Beyond Compare, https://scootersoftware.com

Project Installation

Free Disk Space

A minimum of 64 GB of free disk space is recommended, and datasets can be many times this size and should be stored separately. Check the available space on the target file system before continuing using

$ df -kh
Filesystem      Size  Used Avail Use% Mounted on
...
/dev/sda2       457G  176G  259G  41% /

System Packages

Some additional system packages are required, and installation of these additional packages requires administrator privileges. Note that this is the only time administrator privileges are required.

macOS

On macOS (no CUDA support available) use:

$ brew install libomp libsndfile tcl-tk

Linux (Ubuntu), including WSL2

$ sudo apt-get install -y make build-essential libssl-dev zlib1g-dev \
  libbz2-dev libreadline-dev libsqlite3-dev wget curl llvm \
  libncurses5-dev libncursesw5-dev xz-utils tk-dev libffi-dev liblzma-dev \
  libsndfile-dev portaudio19-dev

RedHat Enterprise Linux / CentOS 8

While Ubuntu 20.04 LTS and 22.04 LTS are the supported distributions, the MAX78000/MAX78002 software packages run fine on all modern Linux distributions that also support CUDA. The apt-get install commands above must be replaced with distribution specific commands and package names. Unfortunately, there is no obvious 1:1 mapping between package names from one distribution to the next. The following example shows the commands needed for RHEL/CentOS 8.

Two of the required packages are not in the base repositories. Enable the EPEL and PowerTools repositories:

$ sudo dnf install https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
$ sudo dnf config-manager --set-enabled powertools

Proceed to install the required packages:

$ sudo dnf group install "Development Tools"
$ sudo dnf install openssl-devel zlib-devel \
  bzip2-devel readline-devel sqlite-devel wget llvm \
  xz-devel tk tk-devel libffi-devel \
  libsndfile libsndfile-devel portaudio-devel

Python 3.8

The software in this project uses Python 3.8.11 or a later 3.8.x version.

First, check whether there is a default Python interpreter and whether it is version 3.8.x:

$ python --version
Command 'python' not found, did you mean:
  command 'python3' from deb python3
  command 'python' from deb python-is-python3
# no default python, install pyenv

$ python --version
Python 2.7.18
# wrong version, pyenv required

Python 2 will not function correctly with the MAX78000/MAX78002 tools. If the result is Python 3.8.x, skip ahead to git Environment. For any other version (for example, 2.7, 3.7, 3.9, 3.10), or no version, continue here.

Note: For the purposes of the MAX78000/MAX78002 tools, “python3” is not a substitute for “python”. Please install pyenv when python --version does not return version 3.8.x, even if “python3” is available.

Note for advanced users: sudo apt-get install python-is-python3 on Ubuntu 20.04 will install Python 3 as the default Python version; however, it may not be version 3.8.x.

pyenv

It is not necessary to install Python 3.8 system-wide, or to rely on the system-provided Python. To manage Python versions, instead use pyenv (https://github.com/pyenv/pyenv). This allows multiple Python versions to co-exist on the same system without interfering with the system or with one another.

On macOS (no CUDA support available):

$ brew install pyenv pyenv-virtualenv

On Linux:

$ curl -L https://github.com/pyenv/pyenv-installer/raw/master/bin/pyenv-installer | bash  # NOTE: Verify contents of the script before running it!!

Then, follow the terminal output of the pyenv-installer and add pyenv to your shell by modifying one or more of ~/.bash_profile, ~/.bashrc, ~/.zshrc, ~/.profile, or ~/.zprofile. The instructions differ depending on the shell (bash or zsh).

For example, on Ubuntu 20.04 inside WSL2 add the following to ~/.bashrc:

# WSL2
export PYENV_ROOT="$HOME/.pyenv"
export PATH="$PYENV_ROOT/bin:$PATH"
eval "$(pyenv init --path)"
eval "$(pyenv virtualenv-init -)"

To display the instructions again at any later time:

$ ~/.pyenv/bin/pyenv init

# (The below instructions are intended for common
# shell setups. See the README for more guidance
# if they don't apply and/or don't work for you.)

# Add pyenv executable to PATH and
# enable shims by adding the following
# to ~/.profile and ~/.zprofile:
...
...

Note: Installing both conda and pyenv in parallel may cause issues. Ensure that the pyenv initialization tasks are executed before any conda related tasks.

Next, close the Terminal, open a new Terminal and install Python 3.8.11.

On macOS:

$ env \
  PATH="$(brew --prefix tcl-tk)/bin:$PATH" \
  LDFLAGS="-L$(brew --prefix tcl-tk)/lib" \
  CPPFLAGS="-I$(brew --prefix tcl-tk)/include" \
  PKG_CONFIG_PATH="$(brew --prefix tcl-tk)/lib/pkgconfig" \
  CFLAGS="-I$(brew --prefix tcl-tk)/include" \
  PYTHON_CONFIGURE_OPTS="--with-tcltk-includes='-I$(brew --prefix tcl-tk)/include' --with-tcltk-libs='-L$(brew --prefix tcl-tk)/lib -ltcl8.6 -ltk8.6'" \
  pyenv install 3.8.11

On Linux, including WSL2:

$ pyenv install 3.8.11

git Environment

If the local git environment has not been previously configured, add the following commands to configure e-mail and name. The e-mail must match GitHub (including upper/lower case):

$ git config --global user.email "[email protected]"
$ git config --global user.name "First Last"

Nervana Distiller

Nervana Distiller is automatically installed as a git sub-module with the other packages. Distiller is used for its scheduling and model export functionality.

Upstream Code

Change to the project root and run the following commands. Use your GitHub credentials if prompted.

$ cd <your/project>
$ git clone --recursive https://github.com/analogdevicesinc/ai8x-training.git
$ git clone --recursive https://github.com/analogdevicesinc/ai8x-synthesis.git

Creating the Virtual Environment

To create the virtual environment and install basic wheels:

$ cd ai8x-training

The default branch is “develop” which is updated most frequently. If you want to use the “main” branch instead, switch to “main” using git checkout main.

If using pyenv, set the local directory to use Python 3.8.11.

$ pyenv local 3.8.11

In all cases, verify that a 3.8.x version of Python is used:

$ python --version
Python 3.8.11

If this does not return version 3.8.x, please install and initialize pyenv.

Then continue with the following:

$ python -m venv venv --prompt ai8x-training

If this command returns an error message similar to “The virtual environment was not created successfully because ensurepip is not available,” please install and initialize pyenv.

On macOS and Linux, including WSL2, activate the environment using

$ source venv/bin/activate

On native Windows, instead use:

$ source venv/Scripts/activate

Then continue with

(ai8x-training) $ pip3 install -U pip wheel setuptools

The next step differs depending on whether the system uses CUDA 11.x, or not.

For CUDA 11.x on Linux, including WSL2:

(ai8x-training) $ pip3 install -r requirements-cu11.txt

For CUDA 11.x on native Windows:

(ai8x-training) $ pip3 install -r requirements-win-cu11.txt

For all other systems, including macOS, and CUDA 10.2 on Linux:

(ai8x-training) $ pip3 install -r requirements.txt

Repository Branches

By default, the develop branch is checked out. This branch is the most frequently updated branch and it contains the latest improvements to the project. To switch to the main branch that is updated less frequently, but may be more stable, use the command git checkout main.

TensorFlow / Keras

Support for TensorFlow / Keras is currently in the develop-tf branch.

Updating to the Latest Version

After additional testing, develop is merged into the main branch at regular intervals.

After a small delay of typically a day, a “Release” tag is created on GitHub for all non-trivial merges into the main branch. GitHub offers email alerts for all activity in a project, or for new releases only. Subscribing to releases only substantially reduces email traffic.

Note: Each “Release” automatically creates a code archive. It is recommended to use a git client to access (pull from) the main branch of the repository using a git client instead of downloading the archives.

In addition to code updated in the repository itself, submodules and Python libraries may have been updated as well.

Major upgrades (such as updating from PyTorch 1.7 to PyTorch 1.8) are best done by removing all installed wheels. This can be achieved most easily by creating a new folder and starting from scratch at Upstream Code. Starting from scratch is also recommended when upgrading the Python version.

For minor updates, pull the latest code and install the updated wheels:

(ai8x-training) $ git pull
(ai8x-training) $ git submodule update --init
(ai8x-training) $ pip3 install -U pip setuptools
(ai8x-training) $ pip3 install -U -r requirements.txt  # or requirements-xxx.txt, as shown above

MSDK Updates

Please also update the MSDK or use the Maintenance Tool as documented in the Analog Devices MSDK documentation. The Maintenance Tool automatically updates the MSDK.

Python Version Updates

Updating Python may require updating pyenv first. Should pyenv install 3.8.11 fail,

$ pyenv install 3.8.11
python-build: definition not found: 3.8.11

then pyenv must be updated. On macOS, use:

$ brew update && brew upgrade pyenv
...
$

On Linux (including WSL2), use:

$ cd $(pyenv root) && git pull && cd -
remote: Enumerating objects: 19021, done.
...
$

The update should now succeed:

$ pyenv install 3.8.11
Downloading Python-3.8.11.tar.xz...
-> https://www.python.org/ftp/python/3.8.11/Python-3.8.11.tar.xz
Installing Python-3.8.11...
...
$ pyenv local 3.8.11

Synthesis Project

The ai8x-synthesis project does not require CUDA.

Start by deactivating the ai8x-training environment if it is active.

(ai8x-training) $ deactivate

Then, create a second virtual environment:

$ cd <your/project>
$ cd ai8x-synthesis

If you want to use the main branch, switch to “main” using the optional command git checkout main.

If using pyenv, run:

$ pyenv local 3.8.11

In all cases, make sure Python 3.8.x is the active version:

$ python --version
Python 3.8.11

If this does not return version 3.8.x, please install and initialize pyenv.

Then continue:

$ python -m venv venv --prompt ai8x-synthesis

Activate the virtual environment. On macOS and Linux (including WSL2), use

$ source venv/bin/activate

On native Windows, instead use

$ source venv/Scripts/activate

For all systems, continue with:

(ai8x-synthesis) $ pip3 install -U pip setuptools
(ai8x-synthesis) $ pip3 install -r requirements.txt

Repository Branches and Updates

Branches and updates for ai8x-synthesis are handled similarly to the ai8x-training project.

Installation is now Complete

With the installation of Training and Synthesis projects completed it is important to remember to activate the proper Python virtual environment when switching between projects. If scripts begin failing in a previously working environment, the cause might be that the incorrect virtual environment is active or that no virtual environment has been activated.

Embedded Software Development Kit (MSDK)

The Software Development Kit (MSDK) for MAX78000 and MAX78002 is used to compile, flash, and debug the output of the ai8x-synthesis (“izer”) tool. It also enables general software development for the microcontroller cores of the MAX78000 and MAX78002. It consists of the following components:

Peripheral Drivers
Board Support Packages (BSPs)
Libraries
Examples
Toolchain
- Arm GCC
- RISC-V GCC
- Make
- OpenOCD

There are two ways to install the MSDK.

Method 1: MSDK Installer

An automatic installer is available for the MSDK. Instructions for downloading, installing, and getting started with the MSDK’s supported development environments are found in the MSDK User Guide.

After installation and setup, continue with the Final Check.

Method 2: Manual Installation

The MSDK is also available as a git repository, which can be used to obtain the latest development resources. The repository contains all of the MSDK’s components except the Arm GCC, RISC-V GCC, and Make. These can be downloaded and installed manually.

Clone the MSDK repository (recommendation: change to the ai8x-synthesis folder first):
```
$ git clone https://github.com/analogdevicesinc/msdk.git sdk
```
Download and install the Arm Embedded GNU Toolchain from https://developer.arm.com/downloads/-/arm-gnu-toolchain-downloads.
- Recommended version: 12.3.Rel1 (newer versions may or may not work correctly)
- Recommended installation location: /usr/local/arm-gnu-toolchain-12.3.rel1/
Download and install the RISC-V Embedded GNU Toolchain from https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases
- Recommended version: 12.3.0-2 (newer versions may or may not work correctly)
- Recommended installation location: /usr/local/xpack-riscv-none-elf-gcc-12.3.0-2/
Install GNU Make
- (Linux/macOS) “make” is available on most systems by default. If not, it can be installed via the system package manager.
- (Windows) Install MSYS2 first, then install “make” using the MSYS2 package manager:
```
$ pacman -S --needed base filesystem msys2-runtime make
```
Install packages for OpenOCD. OpenOCD binaries are available in the “openocd” sub-folder of the ai8x-synthesis repository. However, some additional dependencies are required on most systems. See openocd/README.md for a list of packages to install, then return here to continue.

Add the location of the toolchain binaries to the system path.

On Linux and macOS, copy the following contents into ~/.profile... On macOS, also copy the following contents into ~/.zprofile... ...adjusting for the actual PATH to the compilers and the system’s architecture (TARGET_ARCH):

# Arm GCC
ARMGCC_DIR=/usr/local/gcc-arm-none-eabi-10.3-2021.10  # Change me!
echo $PATH | grep -q -s "$ARMGCC_DIR/bin"
if [ $? -eq 1 ] ; then
    PATH=$PATH:"$ARMGCC_DIR/bin"
    export PATH
    export ARMGCC_DIR
fi

# RISC-V GCC
RISCVGCC_DIR=/usr/local/xpack-riscv-none-elf-gcc-12.3.0-2  # Change me!
echo $PATH | grep -q -s "$RISCVGCC_DIR/bin"
if [ $? -eq 1 ] ; then
    PATH=$PATH:"$RISCVGCC_DIR/bin"
    export PATH
    export RISCVGCC_DIR
fi

# OpenOCD
OPENOCD_DIR=$HOME/Documents/Source/ai8x-synthesis/openocd/bin/TARGET_ARCH  # Change me!
echo $PATH | grep -q -s "$OPENOCD_DIR"
if [ $? -eq 1 ] ; then
    PATH=$PATH:$OPENOCD_DIR
    export PATH
    export OPENOCD_DIR
fi

On Windows, add the toolchain paths to the system PATH variable (search for “edit the system environment variables” in the Windows search bar).

Once the tools above have been installed, continue to the Final Check step below.

Final Check

After a successful manual or MSDK installation, the following commands will run from on the terminal and display their version numbers:

arm-none-eabi-gcc -v
arm-none-eabi-gdb -v
make -v
openocd -v

gen-demos-max78000.sh and gen-demos-max78002.sh will create code that is compatible with the MSDK and copy it into the MSDK’s Example directories.

MAX78000 and MAX78002 Hardware and Resources

MAX78000/MAX78002 are embedded accelerators. Unlike GPUs, MAX78000/MAX78002 do not have gigabytes of memory, and cannot support arbitrary data (image) sizes.

Overview

A typical CNN operation consists of pooling followed by a convolution. While these are traditionally expressed as separate layers, pooling can be done “in-flight” on MAX78000/MAX78002 for greater efficiency.

To minimize data movement, the accelerator is optimized for convolutions with in-flight pooling on a sequence of layers. MAX78000 and MAX78002 also support in-flight element-wise operations, pass-through layers and 1D convolutions (without element-wise operations):

The MAX78000/MAX78002 accelerators contain 64 parallel processors. There are four quadrants that contain 16 processors each.

Each processor includes a pooling unit and a convolutional engine with dedicated weight memory:

Data is read from data memory associated with the processor, and written out to any data memory located within the accelerator. To run a deep convolutional neural network, multiple layers are chained together, where each layer’s operation is individually configurable. The output data from one layer is used as the input data for the next layer, for up to 32 layers (where in-flight pooling and in-flight element-wise operations do not count as layers).

The following picture shows an example view of a 2D convolution with pooling:

Data, Weights, and Processors

Data memory, weight memory, and processors are interdependent.

In the MAX78000/MAX78002 accelerator, processors are organized as follows:

Each processor is connected to its own dedicated weight memory instance.
A group of four processors shares one data memory instance.
A quadrant of sixteen processors shares certain common controls and can be operated tethered to another quadrant, or independently/separately.

Any given processor can:

Read from its dedicated weight memory,
Read from the data memory instance it shares with three other processors, and
As part of output processing, write to any data memory instance.

Weight Memory

Note: Depending on context, weights may also be referred to as “kernels” or “masks”. Additionally, weights are also part of a network’s “parameters”.

For each of the four 16-processor quadrants, weight memory and processors can be visualized as follows. Assuming one input channel processed by processor 0, and 8 output channels, the 8 shaded kernels will be used:

Note: Weights that are not 3×3×8 (= 72-bits) per kernel are packed to save space. For example, when using 1×1 8-bit kernels, 9 kernels will be packed into a single 72-bit memory word.

Data Memory

Data memory in MAX78000/MAX78002 is needed for:

Input data (unless FIFOs are used),
All layer’s activation data, and
Inference outputs.

Data memory connections can be visualized as follows:

All input data must be located in the data memory instance the processor can access. Conversely, output data can be written to any data memory instance inside the accelerator (but not to general purpose SRAM on the Arm microcontroller bus).

The data memory instances inside the accelerator are single-port memories. This means that only one access operation can happen per clock cycle. When using the HWC data format (see Channel Data Formats), this means that each of the four processors sharing the data memory instance will receive one byte of data per clock cycle (since each 32-bit data word consists of four packed channels).

Multi-Pass

When data has more channels than active processors, “multi-pass” is used. Each processor works on more than one channel, using multiple sequential passes, and each data memory holds more than four channels.

As data is read using multiple passes, and all available processor work in parallel, the first pass reads channels 0 through 63, the second pass reads channels 64 through 127, etc., assuming 64 processors are active.

For example, if 192-channel data is read using 64 active processors, Data Memory 0 stores three 32-bit words: channels 0, 1, 2, 3 in the first word, 64, 65, 66, 67 in the second word, and 128, 129, 130, 131 in the third word. Data Memory 1 stores channels 4, 5, 6, 7 in the first word, 68, 69, 70, 71 in the second word, and 132, 133, 134, 135 in the third word, and so on. The first processor processes channel 0 in the first pass, channel 64 in the second pass, and channel 128 in the third pass.

Note: Multi-pass also works with channel counts that are not a multiple of 64, and can be used with fewer than 64 active processors.

Note: For all multi-pass cases, the processor count per pass is rounded up to the next multiple of 4.

Streaming Mode

The machine also implements a streaming mode. Streaming allows input data dimensions that exceed the available per-channel data memory in the accelerator. Note: Depending on the model and application, Data Folding may have performance benefits over Streaming Mode.

The following illustration shows the basic principle: In order to produce the first output pixel of the second layer, not all data needs to be present at the input. In the example, a 5×5 input needs to be available.

In the accelerator implementation, data is shifted into the Tornado memory in a sequential fashion, so prior rows will be available as well. In order to produce the blue output pixel, input data up to the blue input pixel must be available.

When the yellow output pixel is produced, the first (black) pixel of the input data is no longer needed and its data can be discarded:

The number of discarded pixels is network specific and dependent on pooling strides and the types of convolution. In general, streaming mode is only useful for networks where the output data dimensions decrease from layer to layer (for example, by using a pooling stride).

Note: Streaming mode requires the use of FIFOs.

For concrete examples on how to implement streaming mode with a camera, please see the Camera Streaming Guide.

FIFOs

Since the data memory instances are single-port memories, software would have to temporarily disable the accelerator in order to feed it new data. Using FIFOs, software can input available data while the accelerator is running. The accelerator will autonomously fetch data from the FIFOs when needed, and stall (pause) when no enough data is available.

The MAX78000/MAX78002 accelerator has two types of FIFO:

Standard FIFOs

There are four dedicated FIFOs connected to processors 0-3, 16-19, 32-35, and 48-51, supporting up to 16 input channels (in HWC format) or four channels (CHW format). These FIFOs work when used from the Arm Cortex-M4 core and from the RISC-V core.

The standard FIFOs are selected using the --fifo argument for ai8xize.py.

Fast FIFO

The fast FIFO is only available from the RISC-V core, and runs synchronously with the RISC-V for increased throughput. It supports up to four input channels (HWC format) or a single channel (CHW format). The fast FIFO is connected to processors 0, 1, 2, 3 or 0, 16, 32, 48.

The fast FIFO is selected using the --fast-fifo argument for ai8xize.py.

The code generator inserts FIFO-full checks for either type of FIFO. When the data source rate is equal to or slower than the network speed, these checks are not needed. Use --no-fifo-wait to suppress them. The checks are necessary when the data source can deliver faster than the network can process the data.

Number Format

All weights, bias values and data are stored and computed in Q7 format (signed two’s complement 8-bit integers, [–128...+127]). See https://en.wikipedia.org/wiki/Q_%28number_format%29.

The 8-bit value $w$ is defined as:

$$ w = (-a_7 2^7+a_6 2^6+a_5 2^5+a_4 2^4+a_3 2^3+a_2 2^2+a_1 2^1+a_0)/128 $$

Examples:

Binary	Value
0000 0000	0
0000 0001	1/128
0000 0010	2/128
0111 1110	126/128
0111 1111	127/128
1000 0000	−128/128 (–1)
1000 0001	−127/128
1000 0010	−126/128
1111 1110	−2/128
1111 1111	−1/128

On MAX78000/MAX78002, weights can be 1, 2, 4, or 8 bits wide (configurable per layer using the quantization key). Bias values are always 8 bits wide. Data is 8 bits wide, except for the last layer that can optionally output 32 bits of unclipped data in Q17.14 format when not using activation.

weight bits	min	max
8	–128	+127
4	–8	7
2	–2	1
1	–1	0
MAX78002 only 1	–1	+1

Note that for –1/0 1-bit weights (and, to a lesser degree, –1/+1 1-bit weights and 2-bit weights) require the use of bias to produce useful results. Without bias, all sums of products of activated data from a prior layer would be negative, and activation of that data would always be zero.

In other cases, using bias in convolutional layers does not improve inference performance. In particular, Quantization-Aware Training (QAT) optimizes the weight distribution, possibly deteriorating the distribution of the bias values.

Rounding

MAX78000/MAX78002 rounding (for the CNN sum of products) uses “round half towards positive infinity”, i.e. $y=⌊0.5+x⌋$. This rounding method is not the default method in either Excel or Python/NumPy. The rounding method can be achieved in NumPy using y = np.floor(0.5 + x) and in Excel as =FLOOR.PRECISE(0.5 + X).

By way of example:

Input	Rounded
+3.5	+4
+3.25, +3.0, +2.75, +2.5	+3
+2.25, +2.0, +1.75, +1.5	+2
+1.25, +1.0, +0.75, +0.5	+1
+0.25, 0, –0.25, –0.5	0
–0.75, –1.0, –1.25, –1.5	–1
–1.75, –2.0, –2.25, –2.5	–2
–2.75, –3.0, –3.25, –3.5	–3

Addition

Addition works similarly to regular two’s-complement arithmetic.

Example: $$ w_0 = 1/64 → 00000010 $$ $$ w_1 = 1/2 → 01000000 $$ $$ w_0 + w_1 = 33/64 → 01000010 $$

Saturation and Clipping

Values smaller than $–128⁄128$ are saturated to $–128⁄128$ (1000 0000). Values larger than $+127⁄128$ are saturated to $+127⁄128$ (0111 1111).

The MAX78000/MAX78002 CNN sum of products uses full resolution for both products and sums, so the saturation happens only at the very end of the computation.

Example 1:

$$ w_0 = 127/128 → 01111111 $$ $$ w_1 = 127/128 → 01111111 $$ $$ w_0 + w_1 = 254/128 → saturate → 01111111 (= 127/128) $$

Example 2:

$$ w_0 = -128/128 → 10000000 $$ $$ w_1 = -128/128 → 10000000 $$ $$ w_0 + w_1 = -256/128 → saturate → 10000000 (= -128/128) $$

Multiplication

Since operand values are implicitly divided by 128, the product of two values has to be shifted in order to maintain magnitude when using a standard multiplier (e.g., 8×8):

$$ w_0 * w_1 = \frac{w'_0}{128} * \frac{w'_1}{128} = \frac{w'_0 * w'_1}{128} ≫ 7 $$

In software,

Determine the sign bit: $s = sign(w_0) * sign(w_1)$
Convert operands to absolute values: $w'_0 = abs(w_0); w'_1 = abs(w_1)$
Multiply using standard multiplier: $w'_0 * w'_1 = w''_0/128 * w''_1/128; r' = w''_0 * w''_1$
Shift: $r'' = r' ≫ 7$
Round up/down depending on $r'[6]$
Apply sign: $r = s * r''$

Example 1:

$$ w_0 = 1/64 → 00000010 $$ $$ w_1 = 1/2 → 01000000 $$ $$ w_0 * w_1 = 1/128 → shift, truncate → 00000001 (= 1/128) $$

A “standard” two’s-complement multiplication would return 00000000 10000000. The MAX78000/MAX78002 data format discards the rightmost bits.

Example 2:

$$ w_0 = 1/64 → 00000010 $$ $$ w_1 = 1/4 → 00100000 $$ $$ w_0 * w_1 = 1/256 → shift, truncate → 00000000 (= 0) $$

“Standard” two’s-complement multiplication would return 00000000 01000000, the MAX78000/MAX78002 result is truncated to 0 after the shift operation.

Sign Bit

Operations preserve the sign bit.

Example 1:

$$ w_0 = -1/64 → 11111110 $$ $$ w_1 = 1/4 → 00100000 $$ $$ w_0 * w_1 = -1/256 → shift, truncate → 00000000 (= 0) $$

Determine the sign bit: $s = sign(-1/64) * sign(1/4) = -1 * 1 = -1$
Convert operands to absolute values: $w'_0 = abs(-1/64); w'_1 = abs(1/4)$
Multiply using standard multiplier: $r' = 1/64 ≪ 7 * 1/4 ≪ 7 = 2 * 32 = 64$
Shift: $r'' = r' ≫ 7 = 64 ≫ 7 = 0$
Apply sign: $r = s * r'' = -1 * 0 = 0$

Example 2:

$$ w_0 = -1/64 → 11111110 $$ $$ w_1 = 1/2 → 01000000 $$ $$ w_0 * w_1 = -1/128 → shift, truncate → 11111111 (= -1/128) $$

Determine the sign bit: $s = sign(-1/64) * sign(1/2) = -1 * 1 = -1$
Convert operands to absolute values: $w'_0 = abs(-1/64); w'_1 = abs(1/2)$
Multiply using standard multiplier: $r' = 1/64 ≪ 7 * 1/2 ≪ 7 = 2 * 64 = 128$
Shift: $r'' = r' ≫ 7 = 128 ≫ 7 = 1$
Apply sign: $r = s * r'' = -1 * 1 ≫ 7 = -1/128$

Example 3:

$$ w_0 = 127/128 → 01111111 $$ $$ w_1 = 1/128 → 00000001 $$ $$ w_0 * w_1 = 128/128 → saturation → 01111111 (= 127/128) $$

Channel Data Formats

HWC (Height-Width-Channels)

All internal data are stored in HWC format, four channels per 32-bit word. Assuming 3-color (or 3-channel) input, one byte of the 32-bit word will be unused. The highest frequency in this data format is the channel, so the channels are interleaved.

Example:

CHW (Channels-Height-Width)

The input layer (and only the input layer) can alternatively also use the CHW format (a sequence of channels). The highest frequency in this data format is the width W or X-axis, and the lowest frequency is the channel C. Assuming an RGB input, all red pixels are followed by all green pixels, followed by all blue pixels.

Example:

Considerations for Choosing an Input Format

The accelerator supports both HWC and CHW input formats to avoid unnecessary data manipulation. Choose the format that results in the least amount of data movement for a given input.

Internal layers and the output layer always use the HWC format.

In general, HWC is faster since each memory read can deliver data to up to four processors in parallel. On the other hand, four processors must share one data memory instance, which reduces the maximum allowable dimensions of the input layer.

CHW Input Data Format and Consequences for Weight Memory Layout

When using the CHW data format, only one of the four processors sharing the data memory instance can be used. The next channel needs to use a processor connected to a different data memory instance, so that the machine can deliver one byte per clock cycle to each enabled processor.

Because each processor has its own dedicated weight memory, this will introduce “gaps” in the weight memory map, as shown in the following illustration:

Active Processors and Layers

For each layer, a set of active processors must be specified. The number of input channels for the layer must be equal to, or be a multiple of, the active processors, and the input data for that layer must be located in data memory instances accessible to the selected processors.

It is possible to specify a relative offset into the data memory instance that applies to all processors. Example: Assuming HWC data format, specifying the offset as 16,384 bytes (or 0x4000) will cause processors 0-3 to read their input from the second half of data memory 0, processors 4-7 will read from the second half of data memory instance 1, etc.

For most simple networks with limited data sizes, it is easiest to ping-pong between the first and second halves of the data memories – specify the data offset as 0 for the first layer, 0x4000 for the second layer, 0 for the third layer, etc. This strategy avoids overlapping inputs and outputs when a given processor is used in two consecutive layers.

Even though it is supported by the accelerator, the Network Generator will not be able to check for inadvertent overwriting of unprocessed input data by newly generated output data when overlapping data or streaming data. Use the --overlap-data command line switch to disable these checks, and to allow overlapped data.

Layers and Weight Memory

For each layer, the weight memory start column is automatically configured by the Network Loader. The start column must be a multiple of 4, and the value applies to all processors.

The following example shows the weight memory layout for two layers. The first layer (L0) has 8 inputs and 10 outputs, and the second layer (L1) has 10 inputs and 2 outputs.

Bias Memories

Bias values are stored in separate bias memories. There are four bias memory instances available, and a layer can access any bias memory instance where at least one processor is enabled. By default, bias memories are automatically allocated using a modified Fit-First Descending (FFD) algorithm. Before considering the required resource sizes in descending order, and placing values in the bias memory with the most available resources, the algorithm places those bias values that require a single specified bias memory. The bias memory allocation can optionally be controlled using the bias_group configuration option.

Weight Storage Example

The file ai84net.xlsx contains an example for a single-channel CHW input using the AI84Net5 network (this example also supports up to four channels in HWC).

Note: As described above, multiple CHW channels must be loaded into separate memory instances. When using a large number of channels, this can cause “holes” in the processor map, which in turn can cause subsequent layers’ kernels to require padding.

The Network Loader prints a kernel map that shows the kernel arrangement based on the provided network description. It will also flag cases where kernel or bias memories are exceeded.

Example: `Conv2d`

The following picture shows an example of a Conv2d with 1×1 kernels, five input channels, two output channels, and a data size of 2×2. The inputs are shown on the left, and the outputs on the right, and the kernels are shown lined up with the associated inputs — the number of kernel rows matches the number of input channels, and the number of kernel columns matches the number of output channels. The lower half of the picture shows how the data is arranged in memory when HWC data is used for both input and output.

Activation Functions

MAX78000/MAX78002 hardware provides several activation functions.

None

There is always an implicit non-linearity when outputting 8-bit data since outputs are clamped to $[–128, +127]$ (or $[–128/128, +127/128]$ during training). Due to the clamping, “no activation” behaves similar to PyTorch’s nn.Hardtanh(min_value=-128[/128], max_value=127[/128]).

ReLU

All output values are clipped (saturated) to $[0, +127]$. Because of this, ReLU behaves more similar to PyTorch’s nn.Hardtanh(min_value=0, max_value=127[/128]) than to PyTorch’s nn.ReLU().

Abs

Abs returns the absolute value for all inputs, and then clamps the outputs to $[0, +127]$, similar to PyTorch abs() followed by nn.Hardtanh(min_value=0, max_value=127[/128]).

Limitations of MAX78000 Networks

The MAX78000 hardware does not support arbitrary network parameters. Specifically,

Conv2d:
- Kernel sizes must be 1×1 or 3×3. Note: Stacked 3×3 kernels can achieve the effect of larger kernels. For example, two consecutive layers with 3×3 kernels have the same receptive field as a 5×5 kernel. To achieve the same activation as a 5×5 kernel, additional layers are necessary. Note: 2×2 kernels can be emulated by setting one row and one column of 3×3 kernels to zero.
- Padding can be 0, 1, or 2. Padding always uses zeros.
- Stride is fixed to [1, 1].
- Dilation is fixed to 1.
- Groups must be 1.
Conv1d:
- Kernel lengths must be 1 through 9.
- Padding can be 0, 1, or 2.
- Stride is fixed to 1.
- Dilation can be 1 to 1023 for kernel lengths 1, 2, or 3 and is fixed to 1 for kernels with length greater than 3.
ConvTranspose2d:
- Kernel sizes must be 3×3.
- Padding can be 0, 1, or 2.
- Stride is fixed to [2, 2]. Output padding is fixed to 1.
A programmable layer-specific shift operator is available at the output of a convolution, see output_shift (Optional).
The supported activation functions are ReLU and Abs, and a limited subset of Linear. Note that due to clipping, non-linearities are introduced even when not explicitly specifying an activation function.
Pooling:
- Both max pooling and average pooling are available, with or without convolution.
- Pooling does not support padding.
- Pooling more than 64 channels requires the use of a “fused” convolution in the same layer, unless the pooled dimensions are 1×1.
- Pooling strides can be 1 through 16. For 2D pooling, the stride is the same for both dimensions.
- For 2D pooling, supported pooling kernel sizes are 1×1 through 16×16, including non-square kernels. 1D pooling supports kernel sizes from 1 through 16. Note: Pooling kernel size values do not have to be the same as the pooling stride.
- Dilation must be 1.
- Average pooling is implemented both using floor()and using rounding (half towards positive infinity). Use the --avg-pool-rounding switch to turn on rounding in the training software and the Network Generator.
  
  Example:
  - floor: Since there is a quantization step at the output of the average pooling, a 2×2 AvgPool2d of [[0, 0], [0, 3]] will return $\lfloor \frac{3}{4} \rfloor = 0$.
  - rounding: 2×2 AvgPool2d of [[0, 0], [0, 3]] will return $\lfloor \frac{3}{4} \rceil = 1$.
The number of input channels must not exceed 1024 per layer.
The number of output channels must not exceed 1024 per layer.
- Bias is supported for up to 512 output channels per layer.
The number of layers must not exceed 32 (where pooling and element-wise operations do not add to the count when preceding a convolution).
The maximum dimension (number of rows or columns) for input or output data is 1023.
Streaming mode:
- When using data greater than 8192 pixels per channel (approximately 90×90 when width = height) in HWC mode, or 32,768 pixels per channel (181×181 when width = height) in CHW mode, and Data Folding techniques are not used, then streaming mode must be used.
- When using streaming mode, the product of any layer’s input width, input height, and input channels divided by 64 rounded up must not exceed 2^21: $width * height * ⌈\frac{channels}{64}⌉ < 2^{21}$; width and height must not exceed 1023.
- Streaming is limited to 8 consecutive layers or fewer, and is limited to four FIFOs (up to 4 input channels in CHW and up to 16 channels in HWC format), see FIFOs.
- For streaming layers, bias values may not be added correctly in all cases.
- The final streaming layer must use padding.
- Layers that use 1×1 kernels without padding are automatically replaced with equivalent layers that use 3×3 kernels with padding.
The weight memory supports up to 768 * 64 3×3 Q7 kernels (see Number Format), for a total of 432 KiB of kernel memory. When using 1-, 2- or 4-bit weights, the capacity increases accordingly. When using more than 64 input or output channels, weight memory is shared, and effective capacity decreases proportionally (for example, 128 input channels require twice as much space as 64 input channels, and a layer with both 128 input and 128 output channels requires four times as much space as a layer with only 64 input channels and 64 output channels). Weights must be arranged according to specific rules detailed in Layers and Weight Memory.
There are 16 instances of 32 KiB data memory (for a total of 512 KiB). When not using streaming mode, any data channel (input, intermediate, or output) must completely fit into one memory instance. This limits the first-layer input to 32,768 pixels per channel in the CHW format (181×181 when width = height). However, when using more than one input channel, the HWC format may be preferred, and all layer outputs are in HWC format as well. In those cases, it is required that four channels fit into a single memory instance — or 8192 pixels per channel (approximately 90×90 when width = height). Note that the first layer commonly creates a wide expansion (i.e., a large number of output channels) that needs to fit into data memory, so the input size limit is mostly theoretical. In many cases, Data Folding (distributing the input data across multiple channels) can effectively increase both the input dimensions as well as improve model performance.
The hardware supports 1D and 2D convolution layers, 2D transposed convolution layers (upsampling), element-wise addition, subtraction, binary OR, binary XOR as well as fully connected layers (Linear), which are implemented using 1×1 convolutions on 1×1 data:
- The maximum number of input neurons is 1024, and the maximum number of output neurons is 1024 (16 each per processor used).
- Flatten functionality is available to convert 2D input data for use by fully connected layers, see Fully Connected Layers.
- When “flattening” two-dimensional data, the input dimensions (C×H×W) must satisfy C×H×W ≤ 16,384, and H×W ≤ 256. Pooling cannot be used at the same time as flattening.
- Element-wise operators support from 2 up to 16 inputs.
- Element-wise operators can be chained in-flight with pooling and 2D convolution (where the order of pooling and element-wise operations can be swapped).
- For convenience, a Softmax operator is supported in software.
Since the internal network format is HWC in groups of four channels, output concatenation only works properly when all components of the concatenation other than the last have multiples of four channels.
Supported element-wise operations are add, sub, bitwise xor, and bitwise or. Element-wise operations can happen “in-flight” in the same layer as a convolution.
Groups, and depthwise separable convolutions are not supported. Note: Batch normalization should be folded into the weights, see Batch Normalization.

Limitations of MAX78002 Networks

The MAX78002 hardware does not support arbitrary network parameters. Specifically,

Conv2d:
- Kernel sizes must be 1×1 or 3×3. Note: Stacked 3×3 kernels can achieve the effect of larger kernels. For example, two consecutive layers with 3×3 kernels have the same receptive field as a 5×5 kernel. To achieve the same activation as a 5×5 kernel, additional layers are necessary. Note: 2×2 kernels can be emulated by setting one row and one column of 3×3 kernels to zero.
- Padding can be 0, 1, or 2. Padding always uses zeros.
- Stride is fixed to [1, 1].
- Dilation can be 1 to 16.
- Groups can be 1, or the same as the number of input and output channels (depthwise separable convolution).
Conv1d:
- Kernel lengths must be 1 through 9.
- Padding can be 0, 1, or 2, unless there are more than 64 input channels, when padding must be 0.
- Stride is fixed to 1.
- Dilation can be 1 to 2047 for kernel lengths 1, 2, or 3 and is fixed to 1 for kernels with length greater than 3.
- Groups can be 1, or the same as the number of input and output channels (depthwise separable convolution).
ConvTranspose2d:
- Kernel sizes must be 3×3.
- Padding can be 0, 1, or 2.
- Stride is fixed to [2, 2]. Output padding is fixed to 1.
A programmable layer-specific shift operator is available at the output of a convolution, see output_shift (Optional).
The supported activation functions are ReLU and Abs, and a limited subset of Linear. Note that due to clipping, non-linearities are introduced even when not explicitly specifying an activation function.
Pooling:
- Both max pooling and average pooling are available, with or without convolution.
- Pooling does not support padding.
- Pooling strides can be 1 through 16. For 2D pooling, the stride is the same for both dimensions.
- For 2D pooling, supported pooling kernel sizes are 1×1 through 16×16, including non-square kernels. 1D pooling supports kernel sizes from 1 through 16. Note: Pooling kernel size values do not have to be the same as the pooling stride.
- Dilation is supported from 1 to 16, independently for both dimensions.
- Average pooling is implemented both using floor()and using rounding (half towards positive infinity). Use the --avg-pool-rounding switch to turn on rounding in the training software and the Network Generator.
  
  Example:
  - floor: Since there is a quantization step at the output of the average pooling, a 2×2 AvgPool2d of [[0, 0], [0, 3]] will return $\lfloor \frac{3}{4} \rfloor = 0$.
  - rounding: 2×2 AvgPool2d of [[0, 0], [0, 3]] will return $\lfloor \frac{3}{4} \rceil = 1$.
The number of input channels must not exceed 2048 per layer.
The number of output channels must not exceed 2048 per layer.
The number of layers must not exceed 128 (where pooling and element-wise operations do not add to the count when preceding a convolution).
The maximum dimension (number of rows or columns) for input or output data is 2047.
Streaming mode:
- When using data greater than 20,480 pixels per channel in HWC mode (143×143 when height = width), or 81,920 pixels in CHW mode (286×286 when height = width), and Data Folding techniques are not used, then streaming mode must be used.
- When using streaming mode, the product of any layer’s input width, input height, and input channels divided by 64 rounded up must not exceed 2^21: $width * height * ⌈\frac{channels}{64}⌉ < 2^{21}$; width and height must not exceed 2047.
- Streaming is limited to 8 consecutive layers or fewer, and is limited to four FIFOs (up to 4 input channels in CHW and up to 16 channels in HWC format), see FIFOs.
- Layers that use 1×1 kernels without padding are automatically replaced with equivalent layers that use 3×3 kernels with padding.
- Streaming layers must use convolution (i.e., the Conv1d, Conv2d, or ConvTranspose2d operators).
The weight memory of processors 0, 16, 32, and 48 supports up to 5,120 3×3 Q7 kernels (see Number Format), all other processors support up to 4,096 3×3 Q7 kernels, for a total of 2,340 KiB of kernel memory. When using 1-, 2- or 4-bit weights, the capacity increases accordingly. The hardware supports two different flavors of 1-bit weights, either 0/–1 or +1/–1. When using more than 64 input or output channels, weight memory is shared, and effective capacity decreases. Weights must be arranged according to specific rules detailed in Layers and Weight Memory.
The total of 1,280 KiB of data memory is split into 16 sections of 80 KiB each. When not using streaming mode, any data channel (input, intermediate, or output) must completely fit into one memory instance. This limits the first-layer input to 81,920 pixels per channel in CHW format (286×286 when height = width). However, when using more than one input channel, the HWC format may be preferred, and all layer outputs are in HWC format as well. In those cases, it is required that four channels fit into a single memory section — or 20,480 pixels per channel (143×143 when height = width). Note that the first layer commonly creates a wide expansion (i.e., a large number of output channels) that needs to fit into data memory, so the input size limit is mostly theoretical. In many cases, Data Folding (distributing the input data across multiple channels) can effectively increase both the input dimensions as well as improve model performance.
The hardware supports 1D and 2D convolution layers, 2D transposed convolution layers (upsampling), element-wise addition, subtraction, binary OR, binary XOR as well as fully connected layers (Linear), which are implemented using 1×1 convolutions on 1×1 data:
- The maximum number of input neurons is 1024, and the maximum number of output neurons is 1024 (16 each per processor used).
- Flatten functionality is available to convert 2D input data for use by fully connected layers, see Fully Connected Layers.
- When “flattening” two-dimensional data, the input dimensions (C×H×W) must satisfy C×H×W ≤ 16,384, and H×W ≤ 256. Pooling cannot be used at the same time as flattening.
- Element-wise operators support from 2 up to 16 inputs.
- Element-wise operators can be chained in-flight with pooling and 2D convolution (where the order of pooling and element-wise operations can be swapped).
- For convenience, a Softmax operator is supported in software.
The MAX78002 hardware supports executing layers sequentially or in programmed order, and it supports conditional branching based on data and address values and ranges and match counts.
The MAX78002 hardware supports starting a network at any pre-programmed layer (streaming is only supported in the first 8 layers). This can be used to run more than one network, and transitioning from one network to another.
Since the internal network format is HWC in groups of four channels, output concatenation only works properly when all components of the concatenation other than the last have multiples of four channels.
The MAX78002 hardware supports several processing speedups that accesses memory instances in parallel. The tools are capable of generating code that supports these speedups.
Supported element-wise operations are add, sub, xor, and or. Element-wise operations can happen “in-flight” in the same layer as a convolution, except when the input is multi-pass (i.e., more than 64 channels), and a bias addition is also requested.
Note: Batch normalization should be folded into the weights, see Batch Normalization.

Fully Connected (Linear) Layers

m×n fully connected layers can be realized in hardware by “flattening” 2D input data of dimensions C×H×W into m=C×H×W channels of 1×1 input data. The hardware will produce n channels of 1×1 output data. When chaining multiple fully connected layers, the flattening step is omitted. The following picture shows 2D data, the equivalent flattened 1D data, and the output.

For MAX78000/MAX78002, the product C×H×W must not exceed 16,384.

Upsampling (Fractionally-Strided 2D Convolutions)

The hardware supports 2D upsampling (“fractionally-strided convolutions,” sometimes called “deconvolution” even though this is not strictly mathematically correct). The PyTorch equivalent is ConvTranspose2d with a stride of 2.

The example shows a fractionally-strided convolution with a stride of 2, a pad of 1, and a 3×3 kernel. This “upsamples” the input dimensions from 3×3 to output dimensions of 6×6.

$fractionallystrided$

Model Training and Quantization

Hardware Acceleration

If hardware acceleration is not available, skip the following two steps and continue with Training Script.

Before the first training session, check that CUDA hardware acceleration is available using nvidia-smi -q:

(ai8x-training) $ nvidia-smi -q
...
Driver Version                            : 470.57.02
CUDA Version                              : 11.4

Attached GPUs                             : 1
GPU 00000000:01:00.0
    Product Name                          : NVIDIA TITAN RTX
    Product Brand                         : Titan
...

Verify that PyTorch recognizes CUDA:

(ai8x-training) $ python check_cuda.py
System:            linux
Python version:    3.8.11 (default, Jul 14 2021, 12:46:05) [GCC 9.3.0]
PyTorch version:   1.8.1+cu111
CUDA acceleration: available in PyTorch

Training Script

The main training software is train.py. It drives the training aspects, including model creation, checkpointing, model save, and status display (see --help for the many supported options, and the scripts/train_*.sh scripts for example usage).

The models/ folder contains models that fit into the MAX78000 or MAX78002’s weight memory. These models rely on the MAX78000/MAX78002 hardware operators that are defined in ai8x.py.

To train the FP32 model for MNIST on MAX78000 or MAX78002, run scripts/train_mnist.sh from the ai8x-training project. This script will place checkpoint files into the log directory. Training makes use of the Distiller framework, but the train.py software has been modified slightly to improve it and add some MAX78000/MAX78002 specifics.

Since training can take a significant amount of time, the training script does not overwrite any weights previously produced. Results are placed in sub-directories under logs/ named with the date and time when training began. The latest results are always soft-linked to by latest-log_dir and latest_log_file.

Troubleshooting

If the training script returns ModuleNotFoundError: No module named 'numpy', please activate the virtual environment using source venv/bin/activate, or on native Windows without WSL2, source venv/scripts/activate.
If the training script crashes, or if it returns an internal error (such as CUDNN_STATUS_INTERNAL_ERROR), it may be necessary to limit the number of PyTorch workers to 1 (this has been observed running on native Windows). Add --workers=1 when running any training script, for example;
```
$ scripts/train_mnist.sh --workers=1
```
On resource constrained systems, training may abort with an error message such as RuntimeError: unable to open shared memory object </torch_..._...> in read-write mode. Add --workers=0 when running the training script.
By default, many systems limit the number of open file descriptors. train.py checks this limit and prints WARNING: The open file limit is 2048. Please raise the limit (see documentation) when the limit is low. When the limit is too low, certain actions might abort:
```
(ai8x-training) $ scripts/evaluate_facedet_tinierssd.sh 
WARNING: The open file limit is 1024. Please raise the limit (see documentation).
...
--- test ---------------------
165656 samples (256 per mini-batch)
{'multi_box_loss': {'alpha': 2, 'neg_pos_ratio': 3}, 'nms': {'min_score': 0.75, 'max_overlap': 0.3, 'top_k': 20}}
Traceback (most recent call last):
...
RuntimeError: unable to open shared memory object </torch_202118_3977843486> in read-write mode
OSError: [Errno 24] Too many open files
...
```
To fix this issue, check ulimit -n (the soft limit) as well as ulimit -n -H (the hard limit) and raise the file descriptor limit using ulimit -n NUMBER where NUMBER cannot exceed the hard limit. Note that on many Linux systems, the defaults can be configured in /etc/security/limits.conf.

Datasets with larger-dimension images may require substantial amounts of system RAM. For example, scripts/train_kinetics.sh is configured for systems with 64 GB of RAM. When the system runs out of memory, training is abruptly killed and the error is logged to system journal. The following examples are from a system with 48 GB of RAM:

...
Epoch: [13][  142/  142]    Overall Loss 1.078153    Objective Loss 1.078153    Top1 64.062500    LR 0.000500    Time 1.247024    
--- validate (epoch=13)-----------
1422 samples (32 per mini-batch)
Epoch: [13][   10/   45]    Loss 1.082790    Top1 60.937500    
Epoch: [13][   20/   45]    Loss 1.099474    Top1 60.312500    
Epoch: [13][   30/   45]    Loss 1.113100    Top1 59.791667    
Killed

and from the system journal:

kernel: oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null),cpuset=/,mems_allowed=0,global_oom,task_memcg=/user.slice/user-1000.slice/session-11289.scope,task=python,pid=226828,uid=1000
kernel: Out of memory: Killed process 226828 (python) total-vm:81269752kB, anon-rss:5711328kB, file-rss:146056kB, shmem-rss:648024kB, UID:1000 pgtables:97700kB oom_score_adj:0
kernel: oom_reaper: reaped process 226828 (python), now anon-rss:0kB, file-rss:145268kB, shmem-rss:648024kB

Training might succeed after reducing the batch size, reducing image dimensions, or pruning the dataset. Unfortunately, the only real fix for this issue is more system RAM. In the example, kinetics_get_datasets() from datasets/kinetics.py states “The current implementation of using 2000 training and 150 test examples per class at 240×240 resolution and 5 frames per second requires around 50 GB of RAM.”

Example Training Session

Using the MNIST dataset and a simple model as an example, run scripts/train_mnist.sh. The following is the shortened output of an MNIST training session:

(ai8x-training) $ scripts/train_mnist.sh 
Configuring device: MAX78000, simulate=False.
Log file for this run: logs/2021.07.13-111453/2021.07.13-111453.log
{'start_epoch': 10, 'weight_bits': 8}
Optimizer Type: <class 'torch.optim.sgd.SGD'>
Optimizer Args: {'lr': 0.1, 'momentum': 0.9, 'dampening': 0, 'weight_decay': 0.0001, 'nesterov': False}
Downloading https://ossci-datasets.s3.amazonaws.com/mnist/train-images-idx3-ubyte.gz
Downloading https://ossci-datasets.s3.amazonaws.com/mnist/train-images-idx3-ubyte.gz to data/MNIST/raw/train-images-idx3-ubyte.gz
9913344it [00:01, 5712259.71it/s]                                                                                                                                                                                                                           
Extracting data/MNIST/raw/train-images-idx3-ubyte.gz to data/MNIST/raw

...

Dataset sizes:
        training=54000
        validation=6000
        test=10000
Reading compression schedule from: policies/schedule.yaml


Training epoch: 54000 samples (256 per mini-batch)
Named tensors and all their associated APIs are an experimental feature and subject to change. Please do not use them for anything important until they are released as stable. (Triggered internally at  /pytorch/c10/core/TensorImpl.h:1156.)

Epoch: [0][   10/  211]    Overall Loss 2.298435    Objective Loss 2.298435    Top1 13.710937    Top5 52.070313    LR 0.100000    Time 0.054167    
Epoch: [0][   20/  211]    Overall Loss 2.267082    Objective Loss 2.267082    Top1 16.464844    Top5 58.535156    LR 0.100000    Time 0.039278    
...
Epoch: [0][  211/  211]    Overall Loss 0.867936    Objective Loss 0.867936    Top1 71.101852    Top5 92.837037    LR 0.100000    Time 0.025054    

--- validate (epoch=0)-----------
6000 samples (256 per mini-batch)
Epoch: [0][   10/   24]    Loss 0.295286    Top1 91.367188    Top5 99.492188    
Epoch: [0][   20/   24]    Loss 0.293729    Top1 91.054688    Top5 99.550781    
Epoch: [0][   24/   24]    Loss 0.296180    Top1 91.000000    Top5 99.550000    
==> Top1: 91.000    Top5: 99.550    Loss: 0.296

==> Confusion:
[[581   2   3   1   2   3   4   3   2   4]
 [  0 675   4   1   3   0   1   4   0   0]
 [  5   6 501  21  11   2   4  25   7   4]
 [  1   4   7 549   3   5   0  11   2   1]
 [  2   6   7   0 525   1   3   9   0  12]
 [  0   8   2  10   5 464   3   8   6  12]
 [ 13  18   1   0  10   8 574   0   6   1]
 [  1  11   8   7   3   4   0 588   0   3]
 [ 26   4   7   5   9   9  16   5 482  21]
 [  4   9   5   7  36   8   0  19   6 521]]

==> Best [Top1: 91.000   Top5: 99.550   Sparsity:0.00   Params: 71148 on epoch: 0]
Saving checkpoint to: logs/2021.07.13-111453/checkpoint.pth.tar

...

Training epoch: 54000 samples (256 per mini-batch)
Epoch: [199][   10/  211]    Overall Loss 0.033614    Objective Loss 0.033614    Top1 98.984375    Top5 100.000000    LR 0.000100    Time 0.052778    
...
Epoch: [199][  211/  211]    Overall Loss 0.027310    Objective Loss 0.027310    Top1 99.181481    Top5 99.992593    LR 0.000100    Time 0.024874    

--- validate (epoch=199)-----------
6000 samples (256 per mini-batch)
Epoch: [199][   10/   24]    Loss 0.027533    Top1 98.984375    Top5 100.000000    
Epoch: [199][   20/   24]    Loss 0.028965    Top1 98.984375    Top5 100.000000    
Epoch: [199][   24/   24]    Loss 0.028365    Top1 98.983333    Top5 100.000000    
==> Top1: 98.983    Top5: 100.000    Loss: 0.028

==> Confusion:
[[599   0   1   1   0   0   3   0   0   1]
 [  0 685   0   1   0   0   0   2   0   0]
 [  0   1 581   0   0   0   0   2   2   0]
 [  0   0   1 578   0   2   0   1   1   0]
 [  0   1   1   0 558   0   0   0   1   4]
 [  1   0   0   2   0 513   1   0   1   0]
 [  2   1   0   0   1   0 625   0   2   0]
 [  0   1   3   1   0   0   0 619   0   1]
 [  1   0   1   1   1   1   2   0 577   0]
 [  0   0   0   0   2   1   0   6   2 604]]

==> Best [Top1: 99.283   Top5: 100.000   Sparsity:0.00   Params: 71148 on epoch: 180]
Saving checkpoint to: logs/2021.07.13-111453/qat_checkpoint.pth.tar
--- test ---------------------
10000 samples (256 per mini-batch)
Test: [   10/   40]    Loss 0.017528    Top1 99.453125    Top5 100.000000    
Test: [   20/   40]    Loss 0.015671    Top1 99.492188    Top5 100.000000    
Test: [   30/   40]    Loss 0.013522    Top1 99.583333    Top5 100.000000    
Test: [   40/   40]    Loss 0.013415    Top1 99.590000    Top5 100.000000    
==> Top1: 99.590    Top5: 100.000    Loss: 0.013

==> Confusion:
[[ 980    0    0    0    0    0    0    0    0    0]
 [   0 1133    1    0    0    0    0    1    0    0]
 [   1    0 1025    1    0    0    0    5    0    0]
 [   0    0    0 1010    0    0    0    0    0    0]
 [   0    0    0    0  978    0    2    0    0    2]
 [   0    0    0    3    0  888    1    0    0    0]
 [   0    1    0    0    1    2  953    0    1    0]
 [   0    1    0    0    0    0    0 1026    0    1]
 [   0    0    2    1    1    1    0    1  967    1]
 [   0    0    0    0    5    2    0    3    0  999]]


Log file for this run: logs/2021.07.13-111453/2021.07.13-111453.log

For classification, the “Top-1” score refers to the percentage of samples that returned the correct class (the correct target label), while “Top-5” is the percentage of samples the correct answer was one of the five highest ranked predictions. The “Loss” shows the output of the loss function that the training session aims to minimize (the “loss” numbers may be larger than 1, depending on the dataset and model). “LR” is the learning rate, and depending on the learning rate schedule used, LR may decrease as training progresses.

The “Confusion Matrix” shows both the target (expected) label on the vertical (Y) axis, as well as the highest ranked prediction on the horizontal (X) axis. If the network returns 100% expected labels, then only the diagonal (top left to bottom right) will contain values greater than 0.

When enabling TensorBoard (see TensorBoard), these and other statistics are also available in graphical form:

Command Line Arguments

The following table describes the most important command line arguments for train.py. Use --help for a complete list.

Argument	Description	Example
`--help`	Complete list of arguments
Device selection
`--device`	Set device (default: AI84)	`--device MAX78000`
Model and dataset
`-a`, `--arch`, `--model`	Set model (collected from models folder)	`--model ai85net5`
`-f`, `--out-fold-ratio`	Fold ratio for the model output (default: 1). Fold ratio 1 means no folding.	`--out-fold-ratio 4`
`--dataset`	Set dataset (collected from datasets folder)	`--dataset MNIST`
`--data`	Path to dataset (default: data)	`--data /data/ml`
Training
`--epochs`	Number of epochs to train (default: 90)	`--epochs 100`
`-b`, `--batch-size`	Mini-batch size (default: 256)	`--batch-size 512`
`--compress`	Set compression and learning rate schedule	`--compress schedule.yaml`
`--lr`, `--learning-rate`	Set initial learning rate	`--lr 0.001`
`--deterministic`	Seed random number generators with fixed values
`--resume-from`	Resume from previous checkpoint	`--resume-from chk.pth.tar`
`--qat-policy`	Define QAT policy in YAML file (default: policies/qat_policy.yaml). Use “None” to disable QAT.	`--qat-policy qat_policy.yaml`
`--nas`	Enable network architecture search
`--nas-policy`	Define NAS policy in YAML file	`--nas-policy nas/nas_policy.yaml`
`--regression`	Select regression instead of classification (changes Loss function, and log output)
`--dr`	Set target embedding dimensionality for dimensionality reduction	`--dr 64`
`--scaf-lr`	Initial learning rate for sub-center ArcFace loss optimizer
`--scaf-scale`	Scale hyperparameter for sub-center ArcFace loss
`--scaf-margin`	Margin hyperparameter for sub-center ArcFace loss
`--backbone-checkpoint`	Path to checkpoint from which to load backbone weights
Display and statistics
`--enable-tensorboard`	Enable logging to TensorBoard (default: disabled)
`--confusion`	Display the confusion matrix
`--param-hist`	Collect parameter statistics
`--pr-curves`	Generate precision-recall curves
`--embedding`	Display embedding (using projector)
Hardware
`--use-bias`	The `bias=True` parameter is passed to the model. The effect of this parameter is model-dependent (the parameter does nothing, affects some operations, or all operations).
`--avg-pool-rounding`	Use rounding for AvgPool
Evaluation
`-e`, `--evaluate`	Evaluate previously trained model
`--8-bit-mode`, `-8`	Simulate quantized operation for hardware device (8-bit data). Used for evaluation only.
`--exp-load-weights-from`	Load weights from file
Export
`--summary onnx`	Export trained model to ONNX (default name: to model.onnx) — see description below
`--summary onnx_simplified`	Export trained model to simplified ONNX file (default name: model.onnx)
`--summary-filename`	Change the file name for the exported model	`--summary-filename mnist.onnx`
`--save-sample`	Save data[index] from the test set to a NumPy pickle for use as sample data	`--save-sample 10`
`--slice-sample`	For models that require RGB input, when the sample from the dataset has additional channels, slice the sample into 3 channels

ONNX Model Export

The ONNX model export (via --summary onnx or --summary onnx_simplified) is primarily intended for visualization of the model. ONNX does not support all of the operators that ai8x.py uses, and these operators are therefore removed from the export (see function onnx_export_prep() in ai8x.py). The ONNX file does contain the trained weights and may therefore be usable for inference under certain circumstances. However, it is important to note that the ONNX file will not be usable for training (for example, the ONNX floor operator has a gradient of zero, which is incompatible with quantization-aware training as implemented in ai8x.py).

Observing GPU Resources

nvidia-smi can be used in a different terminal during training to examine the GPU resource usage of the training process. In the following example, the GPU is using 100% of its compute capabilities, but not all of the available memory. In this particular case, the batch size could be increased to use more memory.

$ nvidia-smi
+-----------------------------------------------------------------------------+
|  NVIDIA-SMI 470.42.01    Driver Version: 470.42.01    CUDA Version: 11.4    |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|===============================+======================+======================|
|   0  GeForce RTX 208...  Off  | 00000000:01:00.0  On |                  N/A |
| 39%   65C    P2   152W / 250W |   3555MiB / 11016MiB |    100%      Default |
+-------------------------------+----------------------+----------------------+
...

Custom nn.Modules

The ai8x.py file contains customized PyTorch classes (subclasses of torch.nn.Module). Any model that is designed to run on MAX78000/MAX78002 should use these classes. There are three main changes over the default classes in torch.nn.Module:

Additional “Fused” operators that model in-flight pooling and activation.
Rounding, clipping and activation that matches the hardware.
Support for quantized operation (when using the -8 command line argument).

set_device()

ai8x.py defines the set_device() function which configures the training system:

def set_device(
        device,
        simulate,
        round_avg,
        verbose=True,
):

where device is 85 (the MAX78000 device code) or 87 (the MAX78002 device code), simulate is True when clipping and rounding are set to simulate hardware behavior, and round_avg picks one of the two hardware rounding modes for AvgPool.

update_model()

ai8x.py defines update_model(). This function is called after loading a checkpoint file, and recursively applies output shift, weight scaling, and quantization clamping to the model.

List of Predefined Modules

The following modules are predefined:

Name	Description / PyTorch equivalent
Conv2d	Conv2d
FusedConv2dReLU	Conv2d, followed by ReLU
FusedConv2dAbs	Conv2d, followed by Abs
MaxPool2d	MaxPool2d
FusedMaxPoolConv2d	MaxPool2d, followed by Conv2d
FusedMaxPoolConv2dReLU	MaxPool2d, followed by Conv2d, and ReLU
FusedMaxPoolConv2dAbs	MaxPool2d, followed by Conv2d, and Abs
AvgPool2d	AvgPool2d
FusedAvgPoolConv2d	AvgPool2d, followed by Conv2d
FusedAvgPoolConv2dReLU	AvgPool2d, followed by Conv2d, and ReLU
FusedAvgPoolConv2dAbs	AvgPool2d, followed by Conv2d, and Abs
ConvTranspose2d	ConvTranspose2d
FusedConvTranspose2dReLU	ConvTranspose2d, followed by ReLU
FusedConvTranspose2dAbs	ConvTranspose2d, followed by Abs
FusedMaxPoolConvTranspose2d	MaxPool2d, followed by ConvTranspose2d
FusedMaxPoolConvTranspose2dReLU	MaxPool2d, followed by ConvTranspose2d, and ReLU
FusedMaxPoolConvTranspose2dAbs	MaxPool2d, followed by ConvTranspose2d, and Abs
FusedAvgPoolConvTranspose2d	AvgPool2d, followed by ConvTranspose2d
FusedAvgPoolConvTranspose2dReLU	AvgPool2d, followed by ConvTranspose2d, and ReLU
FusedAvgPoolConvTranspose2dAbs	AvgPool2d, followed by ConvTranspose2d, and Abs
Linear	Linear
FusedLinearReLU	Linear, followed by ReLU
FusedLinearAbs	Linear, followed by Abs
Conv1d	Conv1d
FusedConv1dReLU	Conv1d, followed by ReLU
FusedConv1dAbs	Conv1d, followed by Abs
MaxPool1d	MaxPool1d
FusedMaxPoolConv1d	MaxPool1d, followed by Conv1d
FusedMaxPoolConv1dReLU	MaxPool1d, followed by Conv1d, and ReLU
FusedMaxPoolConv1dAbs	MaxPool1d, followed by Conv1d, and Abs
AvgPool1d	AvgPool1d
FusedAvgPoolConv1d	AvgPool1d, followed by Conv1d
FusedAvgPoolConv1dReLU	AvgPool1d, followed by Conv1d, and ReLU
FusedAvgPoolConv1dAbs	AvgPool1d, followed by Conv1d, and Abs
Add	Element-wise Add
Sub	Element-wise Sub
BitwiseOr	Element-wise bitwise Or
BitwiseXor	Element-wise bitwise Xor

Dropout

Dropout modules such as torch.nn.Dropout() and torch.nn.Dropout2d() are automatically disabled during inference, and can therefore be used for training without affecting inference. Dropout can improve generalization by reducing overfitting, but should not be used for “analytical” functions.

Note: Using batch normalization in conjunction with dropout can sometimes degrade training results.

view(), reshape() and Flatten

There are two supported cases for view() or reshape().

Conversion between 1D data and 2D data: Both the batch dimension (first dimension) and the channel dimension (second dimension) must stay the same. The height/width of the 2D data must match the length of the 1D data (i.e., H×W = L). Examples: x = x.view(x.size(0), x.size(1), -1) # 2D to 1D x = x.view(x.shape[0], x.shape[1], 16, -1) # 1D to 2D Note: x.size() and x.shape[] are equivalent. When reshaping data, in_dim: must be specified in the model description file.
Conversion from 1D and 2D to Fully Connected (“flattening”): The batch dimension (first dimension) must stay the same, and the other dimensions are combined (i.e., M = C×H×W or M = C×L). Example: x = x.view(x.size(0), -1) # Flatten An alternate way to express the flatten operation is torch.nn.Flatten().

Support for Quantization

The hardware always uses signed integers for data and weights. While data is always 8-bit, weights can be configured on a per-layer basis. However, training makes use of floating point values for both data and weights, while also clipping (clamping) values.

Data

When using the -8 command line switch, all module outputs are quantized to 8-bit in the range [-128...+127] to simulate hardware behavior. The -8 command line switch is designed for evaluating quantized weights against a test set, in order to understand the impact of quantization. Note that model training always uses floating point values, and therefore -8 is not compatible with training.

The last layer can optionally use 32-bit output for increased precision. This is simulated by adding the parameter wide=True to the module function call.

Weights: Quantization-Aware Training (QAT)

Quantization-aware training (QAT) is enabled by default. QAT is controlled by a policy file, specified by --qat-policy.

After start_epoch epochs, training will learn an additional parameter that corresponds to a shift of the final sum of products.
weight_bits describes the number of bits available for weights.
overrides allows specifying the weight_bits on a per-layer basis.

By default, weights are quantized to 8-bits after 10 epochs as specified in policies/qat_policy.yaml. A more refined example that specifies weight sizes for individual layers can be seen in policies/qat_policy_cifar100.yaml.

Quantization-aware training can be disabled by specifying --qat-policy None.

The proper choice of start_epoch is important for achieving good results, and the default policy’s start_epoch may be much too small. As a rule of thumb, set start_epoch to a very high value (e.g., 1000) to begin, and then observe where in the training process the model stops learning. This epoch can be used as start_epoch, and the final network metrics (after an additional number of epochs) should be close to the non-QAT metrics. Additionally, ensure that the learning rate after the start_epoch epoch is relatively small.

For more information, please also see Quantization.

Batch Normalization

Batch normalization after Conv1d and Conv2d layers is supported using “fusing.” The fusing operation merges the effect of batch normalization layers into the parameters of the preceding convolutional layer, by modifying weights and bias values of that preceding layer. For detailed information about batch normalization fusing/fusion/folding, see Section 3.2 of the following paper: https://arxiv.org/pdf/1712.05877.pdf.

After fusing/folding, the network will no longer contain any batchnorm layers. The effects of batch normalization will instead be expressed by modified weights and biases of the preceding convolutional layer.

When using Quantization-Aware Training (QAT), batchnorm layers are automatically folded during training and no further action is needed.
When using Post-Training Quantization, the batchnormfuser.py script (see BatchNorm Fusing) must be called before quantize.py to explicitly fuse the batchnorm layers.

Note: Using batch normalization in conjunction with dropout can sometimes degrade training results.

Adapting Pre-existing Models

In some cases, it may be possible to use generic models that were designed for non-MAX78000/MAX78002 platforms. To adapt pre-existing models to MAX78000/MAX78002, several steps are needed:

Check that all operators are supported in hardware (see List of Predefined Modules, Dropout, and Batch Normalization).
Check that the model size, parameter count, and parameters to the operators are supported (see Limitations of MAX78000 Networks and Limitations of MAX78002 Networks). For example, padding must always be zero-padding, and Conv2d() supports 1×1 and 3×3 kernels.
Change from PyTorch nn.modules to the ai8x versions of the modules. For example, nn.Conv2d(…) ⟶ ai8x.Conv2d(…).
Merge modules where possible (for example, MaxPool2d() + Conv2d() + ReLU() = FusedMaxPoolConv2dReLU()).
Re-train the model. This is necessary to correctly model clipping and quantization effects of the hardware.

Model Comparison and Feature Attribution

TensorBoard can be used for model comparison and feature attribution.

TensorBoard

TensorBoard support is built into train.py. When enabled using --enable-tensorboard, it provides a local web server that can be started before, during, or after training, and it picks up all data that is written to the logs/ directory.

For classification models, TensorBoard supports the optional --param-hist and --embedding command line arguments. --embedding randomly selects up to 100 data points from the last batch of each verification epoch. These can be viewed in the “projector” tab in TensorBoard.

--pr-curves adds support for displaying precision-recall curves.

To start the TensorBoard server, use a second terminal window:

(ai8x-training) $ tensorboard --logdir='./logs'
TensorBoard 2.4.1 at http://127.0.0.1:6006/ (Press CTRL+C to quit)

On a shared system, add the --port 0 command line option.

The training progress can be observed by starting TensorBoard and pointing a web browser to the port indicated.

Examples

TensorBoard produces graphs and displays metrics that may help optimize the training process, and can compare the performance of multiple training sessions and their settings. Additionally, TensorBoard can show a graphical representation of the model and its parameters, and help discover labeling errors. For more information, please see the TensorBoard web site.

Remote Access to TensorBoard

When using a remote system, use ssh in another terminal window to forward the remote port to the local machine:

$ ssh -L 6006:127.0.0.1:6006 targethost

When using PuTTY, port forwarding is achieved as follows:

SHAP — SHapely Additive exPlanations

The training software integrates code to generate SHAP plots (see https://github.com/slundberg/shap). This can help with feature attribution for input images.

The train.py program can create plots using the --shap command line argument in combination with --evaluate:

$ python train.py --model ai85net5 --dataset CIFAR10 --confusion --evaluate --device MAX78000 --exp-load-weights-from logs/CIFAR-new/best.pth.tar --shap 3

This will create a plot with a random selection of 3 test images. The plot shows ten outputs (the ten classes) for the three different input images on the left. Red pixels increase the model’s output while blue pixels decrease the output. The sum of the SHAP values equals the difference between the expected model output (averaged over the background dataset) and the current model output.

BatchNorm Fusing

Batchnorm fusing (see Batch Normalization) is needed as a separate step only when both the following are true:

Batch Normalization is used in the network and
Quantization-Aware Training (QAT) is not used (i.e., when post-training quantization is active).

In order to perform batchnorm fusing, the batchnormfuser.py tool must be run before the quantize.py script.

Note: Most of the examples either don’t use batchnorm, so no fusing is needed, or they use QAT, so batchnorm fusing happens automatically.

Command Line Arguments

The following table describes the command line arguments for batchnormfuser.py:

Argument	Description	Example
`-i`, `--inp_path`	Set input checkpoint path	`-i logs/2020.06.05-235316/best.pth.tar`
`-o`, `--out_path`	Set output checkpoint path for saving fused model	`-o best_without_bn.pth.tar`
`-oa`, `--out_arch`	Set output architecture name (architecture without batchnorm layers)	`-oa ai85simplenet`

Data Folding

Data Folding is data reshaping operation. When followed by a Conv2d operation, it is equivalent to a convolution operation on the original image with a larger kernel and a larger stride.

On MAX78000 and MAX78002, data folding is beneficial because it increases available resolution and reduces latency. A typical 3-channel RGB image uses only three processors in the first layer which increases latency, and restricts the image dimensions to what can be fit into the data memories associated with three processors.

By creating many low resolution sub-images and concatenating them through the channel dimension, up to 64 processors and their associated data memories can be used. This results in a higher maximum effective resolution, and increased throughput in the first layer.

For certain models (see models/ai85net-unet.py in the training repository) this also improves model performance, due to the increase in effective kernel size and stride.

Note that data folding must be applied during model training. During inference, there is no additional overhead; the input data is simply loaded to different processors/memory addresses.

Quantization

There are two main approaches to quantization — quantization-aware training and post-training quantization. The MAX78000/MAX78002 support both approaches.

For both approaches, the quantize.py software quantizes an existing PyTorch checkpoint file and writes out a new PyTorch checkpoint file that can then be used to evaluate the quality of the quantized network, using the same PyTorch framework used for training. The same new quantized checkpoint file will also be used to feed the Network Loader.

Quantization-Aware Training (QAT)

Quantization-aware training is the better performing approach. It is enabled by default. QAT learns additional parameters during training that help with quantization (see Weights: Quantization-Aware Training (QAT). No additional arguments (other than input, output, and device) are needed for quantize.py.

The input checkpoint to quantize.py is either qat_best.pth.tar, the best QAT epoch’s checkpoint, or qat_checkpoint.pth.tar, the final QAT epoch’s checkpoint.

Example:

(ai8x-synthesis) $ python quantize.py proj/qat_best.pth.tar proj/proj_q8.pth.tar --device MAX78000

Post-Training Quantization

This approach is also called ”naive quantization”. It should be used when --qat-policy None is specified for training.

While several approaches for clipping are implemented in quantize.py, clipping with a simple fixed scale factor performs best, based on experimental results. The approach requires the clamping operators implemented in ai8x.py.

Note that the “optimum” scale factor for simple clipping is highly dependent on the model and weight data. For the MNIST example, a --scale 0.85 works well. For the CIFAR-100 example on the other hand, Top-1 performance is 30 points better with --scale 1.0.

The input checkpoint to quantize.py for post-training quantization is typically best.pth.tar, the best epoch’s checkpoint, or checkpoint.pth.tar, the final epoch’s checkpoint.

Example:

(ai8x-synthesis) $ python quantize.py proj2/best.pth.tar proj2/proj2_q8.pth.tar \
--device MAX78000 --scale 0.85 --clip-method SCALE

Command Line Arguments

The quantize.py software has the following important command line arguments:

Argument	Description	Example
`--help`	Complete list of options
Device selection
`--device`	Set device (default: MAX78000)	`--device MAX78002`
Debug
`-v`	Verbose output
Weight quantization
`-c`, `--config-file`	YAML file with weight quantization information (default: from checkpoint file, or 8-bit for all layers)	`-c mnist.yaml`
`--clip-method`	Non-QAT clipping method — either STDDEV, AVG, AVGMAX or SCALE	`--clip-method SCALE`
`--scale`	Sets scale for the SCALE clipping method	`--scale 0.85`

Note: The syntax for the optional YAML file is described below. The same file can be used for both quantize.py and ai8xize.py.

Note: quantize.py does not need access to the dataset.

Example and Evaluation

Copy the working and tested weight files into the trained/ folder of the ai8x-synthesis project.

Example for MNIST:

(ai8x-synthesis) $ scripts/quantize_mnist.sh
Configuring device: MAX78000
Converting checkpoint file trained/ai85-mnist-qat8.pth.tar to trained/ai85-mnist-qat8-q.pth.tar

Model keys (state_dict):
conv1.output_shift, conv1.weight_bits, conv1.bias_bits, conv1.quantize_activation, conv1.adjust_output_shift, conv1.op.weight, conv2.output_shift, conv2.weight_bits, conv2.bias_bits, conv2.quantize_activation, conv2.adjust_output_shift, conv2.op.weight, conv3.output_shift, conv3.weight_bits, conv3.bias_bits, conv3.quantize_activation, conv3.adjust_output_shift, conv3.op.weight, conv4.output_shift, conv4.weight_bits, conv4.bias_bits, conv4.quantize_activation, conv4.adjust_output_shift, conv4.op.weight, fc.output_shift, fc.weight_bits, fc.bias_bits, fc.quantize_activation, fc.adjust_output_shift, fc.op.weight, fc.op.bias, conv1.shift_quantile, conv2.shift_quantile, conv3.shift_quantile, conv4.shift_quantile, fc.shift_quantile
conv1.op.weight avg_max: 0.34562021 max: 0.51949096 mean: 0.02374955 factor: [128.] bits: 8
conv2.op.weight avg_max: 0.2302317 max: 0.269847 mean: -0.021919029 factor: [256.] bits: 8
conv3.op.weight avg_max: 0.42106587 max: 0.49686784 mean: -0.021314206 factor: [256.] bits: 8
conv4.op.weight avg_max: 0.49237916 max: 0.5019533 mean: 0.010923488 factor: [128.] bits: 8
fc.op.weight avg_max: 0.9884483 max: 1.0039074 mean: -0.0033990005 factor: [64.] bits: 8
fc.op.bias avg_max: 0.00029080958 max: 0.26957372 mean: -0.00029080958 factor: [64.] bits: 8

To evaluate the quantized network for MAX78000 (run from the training project):

(ai8x-training) $ scripts/evaluate_mnist.sh
...
--- test ---------------------
10000 samples (256 per mini-batch)
Named tensors and all their associated APIs are an experimental feature and subject to change. Please do not use them for anything important until they are released as stable. (Triggered internally at  /pytorch/c10/core/TensorImpl.h:1156.)

Test: [   10/   40]    Loss 0.007288    Top1 99.531250    Top5 100.000000    
Test: [   20/   40]    Loss 0.010161    Top1 99.414062    Top5 100.000000    
Test: [   30/   40]    Loss 0.007681    Top1 99.492188    Top5 100.000000    
Test: [   40/   40]    Loss 0.009589    Top1 99.440000    Top5 100.000000    
==> Top1: 99.440    Top5: 100.000    Loss: 0.010

==> Confusion:
[[ 978    0    1    0    0    0    0    0    1    0]
 [   0 1132    1    1    0    0    1    0    0    0]
 [   0    0 1028    0    0    0    0    4    0    0]
 [   0    1    0 1007    0    1    0    1    0    0]
 [   0    0    1    0  977    0    1    0    1    2]
 [   1    0    0    3    0  884    3    0    0    1]
 [   3    0    1    0    1    3  949    0    1    0]
 [   0    2    1    0    0    0    0 1024    0    1]
 [   0    0    2    1    1    1    0    0  968    1]
 [   0    0    0    0    7    1    0    4    0  997]]

Log file for this run: 2021.07.20-123302/2021.07.20-123302.log

Note that the “Loss” output is not always directly comparable to the unquantized network, depending on the loss function itself.

Troubleshooting

If the model initially trains correctly, but the quantized performance is significantly worse, verify that the data loader calls ai8x.normalize(). Data must be normalized to the range expected by hardware, $[–128, +127]$, for both evaluation on simulated hardware and on the actual hardware. See also Normalizing Input Data in the Data Loader description.

Alternative Quantization Approaches

If quantization-aware training is not desired, post-training quantization can be improved using more sophisticated methods. For example, see https://github.com/pytorch/glow/blob/master/docs/Quantization.md, https://github.com/ARM-software/ML-KWS-for-MCU/blob/master/Deployment/Quant_guide.md, or Distiller’s approach (installed with this software).

Further, a quantized network can be refined using post-quantization training (see Distiller).

In all cases, ensure that the quantizer writes out a checkpoint file that the Network Loader can read.

Adding New Network Models and New Datasets to the Training Process

Model

The following step is needed to add new network models:

Implement a new network model based on the constraints described earlier, see Custom nn.Modules (and models/ai85net.py for an example).

Note: When re-using existing models, please note that some of the example models are designed to be used with Neural Architecture Search (NAS). These models will typically not perform well, or not fit into hardware without the NAS steps. These models have “nas” as part of their name.

Model Instantiation and Initialization

To support evaluation of the quantized model using PyTorch, the model must be instantiated and initialized using all parameters supplied by train.py, and the parameters must be passed to the individual nn.Modules.

Example:

class NewModel(nn.Module):
    def __init__(self, num_classes=10, num_channels=3, dimensions=(64, 64), bias=False, **kwargs):
        super().__init__()
        self.conv1 = ai8x.FusedConv2dReLU(..., bias=bias, **kwargs)
        ...

    def forward(self, x):
        ...
        
def newmodel(pretrained=False, **kwargs):
    ...
    return NewModel(**kwargs)

Note the __init(...)__ function signature, the extra arguments to ai8x.FusedConv2dReLU(...) and the NewModel(**kwargs) instantiation.

`models` Data Structure

The file must include the models data structure that describes the model. models can list multiple models in the same file.

For each model, three fields are required in the data structure:

The name field assigns a name to the model for discovery by train.py, for example “resnet5”, and the name must match a function that instantiates the model. Note: The name must be unique.
The min_input field describes the minimum width for 2D models, it is typically 1 (when the input W dimension is smaller than min_input, it is padded to min_input).
The dim field is either 1 (the model handles 1D inputs) or 2 (the model handles 2D inputs).

Model File Location

Place the new model file (with its unique model name as specified by name in the data structure described above) into the models folder. train.py will now be able to discover and use the new model by specifying --model modelname.

Data Loader

The application note Data Loader Design for MAX78000 Model Training provides an in-depth tutorial about developing data loaders.

In brief, the following steps are needed for new data formats and datasets:

Develop a data loader in PyTorch, see https://pytorch.org/tutorials/beginner/data_loading_tutorial.html. See datasets/mnist.py for an example.
The data loader must include a loader function, for example mnist_get_datasets(data, load_train=True, load_test=True). data is a tuple of the specified data directory and the program arguments, and the two bools specify whether training and/or test data should be loaded.
The data loader is expected to download and preprocess the datasets as needed and install everything in the specified location.
The loader returns a tuple of two PyTorch Datasets for training and test data.

Normalizing Input Data

For training, input data is expected to be in the range $[–\frac{128}{128}, +\frac{127}{128}]$. When evaluating quantized weights, or when running on hardware, input data is instead expected to be in the native MAX78000/MAX78002 range of $[–128, +127]$. Conversely, the majority of PyTorch datasets are PIL images of range $[0, 1]$. The respective data loaders therefore call the ai8x.normalize() function, which expects an input of 0 to 1 and normalizes the data, automatically switching between the two supported data ranges. Note: A missing call to ai8x.normalize() may cause severe performance degradation when evaluating the quantized model compared to the unquantized model.

When running inference on MAX78000/MAX78002 hardware, it is important to take the native data format into account, and it is desirable to perform as little preprocessing as possible during inference. For example, an image sensor may return “signed” data in the range $[–128, +127]$ for each color. No additional preprocessing or mapping is needed for this sensor since the model was trained with this data range.

In many cases, image data is delivered as fewer than 8 bits per channel (for example, RGB565). In these cases, retraining the model with this limited range (0 to 31 for 5-bit color and 0 to 63 for 6-bit color, respectively) can potentially eliminate the need for inference-time preprocessing.

On the other hand, a different sensor may produce unsigned data values in the full 8-bit range $[0, 255]$. This range must be mapped to $[–128, +127]$ to match hardware and the trained model. The mapping can be performed during inference by subtracting 128 from each input byte, but this requires extra (pre-)processing time during inference or while loading data (for example, by using xor 0x808080).

`datasets` Data Structure

Add the new data loader to a new file in the datasets directory (for example datasets/mnist.py). The file must include the datasets data structure that describes the dataset and points to the new loader. datasets can list multiple datasets in the same file.

`name`

The name field assigns a name to the dataset for discovery by train.py, for example “MNIST”. Note: The name must be unique.

`input`

The input field describes the dimensionality of the data, and the first dimension is passed as num_channels to the model, whereas the remaining dimensions are passed as dimension. For example, 'input': (1, 28, 28) will be passed to the model as num_channels=1 and dimensions=(28, 28). One-dimensional input uses a single “dimension”, for example 'input': (2, 512) will be passed to the model as num_channels=2 and dimensions=(512, ).

`output`

The output field is a tuple of strings or numbers that describe the output classes (for example, 'output': (1, 2, 3, …) or 'output': ('cat', 'dog', …)).

`loader`

loader points to a loader function for the dataset (see Data Loader).

`weight` (optional)

The optional weight tuple can be set based on the a priori probabilities for the classes, i.e., it answers the question “how likely is it that data submitted for inference belongs to the given class?”. For instance, if the sample counts for each class in the training dataset are equal, the weight tuple indicates the a priori probabilities of the occurrence of the classes. Note that the number of samples in a dataset for a given class does not always reflect the real-world probabilities. When there is a mismatch, a given “weight” value can degrade the performance on the test set, yet improve real-world inference, or vice versa.

Each value in the tuple defines the weight for one output class, in the same order as output. When weight is not specified, all classes are given the same probability. When specifying a weight for the class “other,” increasing the value may improve results (e.g., multiplying the weight by 4×).

Example:

 'output': ('zero', 'one', 'two', 'three', 'four', 'five', 'other'),
 'weight': (1, 1, 1, 1, 1, 1, 0.06),

This defines that the probabilities for ‘zero’ to ‘five’ are equal, and that ‘other’ is 1/0.06 = 16.67 times more likely to occur assuming the numbers of the samples in the training dataset from each class are equal.

Note: It is generally recommended to have at least 1,000 samples available for training for each class.

`regression` (optional)

The optional regression field in the structure can be set to True to automatically select the --regression command line argument. regression defaults to False.

`visualize` (optional)

The optional visualize field can point to a custom visualization function used when creating --embedding. The input to the function (format NCHW for 2D data, or NCL for 1D data) is a batch of data (with N ≤ 100). The default handles square RGB or monochrome images. For any other data, a custom function must be supplied.

Training and Verification Data

The training/verification data is located (by default) in data/DataSetName, for example data/CIFAR10. The location can be overridden with the --data target_directory command line argument.

Training Process

Train the new network/new dataset. See scripts/train_mnist.sh for a command line example.

Netron — Network Visualization

The Netron tool can visualize networks, similar to what is available within TensorBoard. To use Netron, use train.py to export the trained network to ONNX, and upload the ONNX file. Please note that not all networks can be exported to ONNX due to limitations in the PyTorch ONNX export library.

(ai8x-training) $ python train.py --model ai85net5 --dataset MNIST --evaluate --exp-load-weights-from checkpoint.pth.tar --device MAX78000 --summary onnx

Troubleshooting

The behavior of a training session might change when Quantization Aware Training is enabled, either by no longer learning or by returning unacceptable results when evaluating the quantized weights on the test set.

While there can be multiple reasons for this, check two important settings that can influence the training behavior:

The initial learning rate may be set too high. Reduce LR by a factor of 10 or 100 by specifying a smaller initial --lr on the command line, and possibly by reducing the epoch milestones for further reduction of the learning rate in the scheduler file specified by --compress. Note that the the selected optimizer and the batch size both affect the learning rate.
The epoch when QAT is engaged may be set too low. Increase start_epoch in the QAT scheduler file specified by --qat-policy, and increase the total number of training epochs by increasing the value specified by the --epochs command line argument and by editing the ending_epoch in the scheduler file specified by --compress. See also the rule of thumb discussed in the section [Weights: Quantization-Aware Training (QAT)](#weights:-auantization-aware-training (qat)).

Neural Architecture Search (NAS)

Introduction

The following chapter describes the neural architecture search (NAS) solution for MAX78000/MAX78002 as implemented in the ai8x-training repository. Details are provided about the NAS method, how to run existing NAS models in the repository, and how to define a new NAS model.

The intention of NAS is to find the best neural architecture for a given set of requirements by automating architecture engineering. NAS explores the search space automatically and returns an architecture that is hard to optimize further using human or “manual” design. Multiple different techniques are proposed in the literature for automated architecture search, including reinforcement-based and evolutionary-based solutions.

Once-for-All

Once-for-All (OFA) is a weight-sharing-based NAS technique, originally proposed by MIT and IBM researchers. The paper introduces a method to deploy a trained model to diverse hardware directly without the need of retraining. This is achieved by training a “supernet,” which is named the “Once-for-All” network, and then deploying only part of the supernet, depending on hardware constraints. This requires a training process where all sub-networks are trained sufficiently to be deployed directly. Since training all sub-networks can be computationally prohibitive, sub-networks are sampled during each gradient update step. However, sampling only a small number of networks may cause performance degradation as the sub-networks are interfering with one another. To resolve this issue, a progressive shrinking algorithm is proposed by the authors. Rather than optimizing the supernet directly with all interfering sub-networks, they propose to first train a supernet that is the largest network with maximum kernel size, depth and width. Then, smaller sub-networks that share parameters with the supernet are trained progressively. Thus, smaller networks can be initialized with the most important parameters. If the search space consists of different kernel sizes, depths and widths, they are added to sampling space sequentially to minimize the risk of parameter interference. To illustrate, after full model training, the “elastic kernel” stage is performed, where the kernel size is chosen from {1×1, 3×3} while the depth and width are kept at their maximum values. Next, kernel sizes and depths are sampled in the “elastic depth” stage. Finally, all sub-networks are sampled from the whole search space in the “elastic width” stage.

After the supernet is trained using sub-networks, the “architecture search” stage takes place. The paper proposes evolutionary search as the search algorithm. In this stage, the best architecture is searched, given particular hardware constraints. A set of candidate architectures that perform best on the validation set are mutated, and crossovers are performed iteratively in the algorithm.

After the training and search steps, the model is ready to deploy to the target hardware in the OFA method as the parameters are already trained. However, on MAX78000/MAX78002, the model still needs to be quantized for deployment. Therefore, this implementation has an additional step where the model needs to be trained using the quantization-aware training (QAT) module of the MAX78000/MAX78002 training repository.

To summarize, the sequential steps of the Once-for-All supernet training are:

Full model training (stage 0): In this step, the supernet with maximum kernel size, depth and width is trained. This network is suggested to be at least 3× to 5× larger than the MAX78000/MAX78002 implementation limits, since sub-networks of the supernet are the targets for MAX78000/MAX78002 deployment.
Elastic kernel (stage 1): In this step, only sub-networks with different kernel sizes are sampled from the supernet. For the MAX78000/MAX78002 Conv2d layers, the supported sizes are {3×3, 1×1}, and {5, 3, 1} for Conv1d layers. Since the sampled sub-network is a part of the supernet, the supernet is updated with gradient updates.
Elastic depth (stage 2): In this step, sub-networks with different kernel sizes and depths are sampled from the supernet. In the MAX78000/MAX78002 implementation of OFA, the network is divided into parts called “units.” Each unit can consist of a different number of layers and contain an extra pooling layer at its beginning. Depth sampling is performed inside the units. If a sub-network with N layers in a specific unit is sampled, the first D layers of the unit in the supernet is kept by removing the last (N-D) layers. Consequently, the first layers of each unit are shared among multiple sub-networks.
Elastic width (stage 3): In addition to kernel size and depth, sub-networks are sampled from different width options in this stage. For width shrinking, the most important channels with the largest L1 norm are selected. This ensures that only the most important channels are shared. To achieve this, the layer output channels are sorted after each gradient update. The input channels of the following layers are sorted similarly to keep the supernet functional.
Evolutionary search: For most search space selections, the number of sub-networks is too large to allow for evaluation of each sub-network. During evolutionary search, better architectures are found after each iteration by mutations and crossovers. The processing time required for this stage depends on the candidate pool size and the number of iterations; however, it is generally much shorter than the time spent for the training stages.

In addition to the steps listed above, QAT is performed using the chosen architecture.

For more details and to better understand OFA, please see the original paper.

Stages and Levels in the MAX78000/MAX78002 Implementation

In the NAS module of the ai8x-training repository, there are two concepts that are used to indicate the progress of the NAS training process, called “stages” and “levels.” Stage denotes whether full model training (stage 0), elastic kernel (stage 1), elastic depth (stage 2) or elastic width (stage 3) is being performed. Training is completed after stage 3 has finished.

Levels denote the phases of stages. In the original OFA paper, the authors suggest progressive shrinking to facilitate training of interfering sub-networks. Stages play an important role here. In each stage, a new search parameter is introduced to the training. To further facilitate training, stages can be decomposed into levels. With increasing levels, smaller sub-networks become sampleable since the network is trained well enough to be ready for an increased number of sub-networks. For example, if the deepest unit in the network consists of 4 layers, there are 3 levels in stage 2. The reason for this is that in the level 1 of stage 2 (elastic depth), the last layer is removed with 50% probability in the sub-network sampling. Therefore, possible depths are 3 or 4 for that unit in level 1. In level 2, the possible depths for this unit are [2, 3, 4]. Likewise, the possible depths are [1, 2, 3, 4] in level 3. The first layer in a unit is always present, it is never removed in any sub-network. The same level logic applies to stage 1 and stage 3 as well. In stage 1, kernel sizes are sampled. For 2D convolutions, the possible kernel options are either 1×1 or 3×3, so there is only one level. However, for 1D convolutions, kernel sizes could be 5, 3, or 1; therefore, there are two levels. In stage 3, widths are sampled. The possible widths are 100% of the same layer’s width in the supernet, plus 75%, 50%, and 25% of the supernet width. Since there are four options, there are 4–1=3 levels in stage 3. As levels increase, smaller widths become an option in the sampling pool.

In summary, the architecture of the supernet determines how many levels there will be for training. The deepest unit determines the number of levels in stage 2. Assuming there are three levels in stage 2, then training continues from level 1 of stage 3 just after level 3 of stage 2 has completed. The checkpoint files for each level are saved, so it is possible to resume training from a specific level.

Usage

Network Architecture Search (NAS) can be enabled using the --nas command line option. NAS is based on the Once-For-All (OFA) approach described above. NAS is controlled by a policy file, specified by --nas-policy. The policy file contains the following fields:

start_epoch: The full model is trained without any elastic search until this epoch is reached.
validation_freq is set to define the frequency in epochs to calculate the model performance on the validation set after full model training. This parameter is used to save training time, especially when the model includes batch normalization.
The elastic_kernel, elastic_depth and elastic_width fields are used to define the properties of each elastic search stage. These fields include the following two sub-fields:
- leveling enables leveling during elastic search. See above for an explanation of stages and levels.
- num_epochs defines the number of epochs for each level of the search stage if leveling is Fal/e.
kd_params is set to enable Knowledge Distillation.
- teacher_model defines the model used as teacher model. Teacher is the model before epoch start_epoch if it is set to full_model. Teacher is updated with the model just before the stage transition if this field is set to prev_stage_model.
- See here for more information to set distill_loss, student_loss and temperature.
The evolution_search field defines the search algorithm parameters used to find the sub-network of the full network.
- population_size is the number of sub-networks to be considered at each iteration.
- ratio_parent is the ratio of the population to be kept for the next iteration.
- ratio_mutation determines the number of mutations at each iteration, which is calculated by multiplying this ratio by the population size.
- prob_mutation is the ratio of the parameter change of a mutated network.
- num_iter is the number of iterations.
- constraints are used to define the constraints of the samples in the population.
  - min_num_weights and max_num_weights are used to define the minimum and the maximum number of weights in the network.
  - width_options is used to limit the possible number of channels in any of the layers in the selected network. This constraint can be used to effectively use memory on MAX78000/MAX78002.

It is also possible to resume NAS training from a saved checkpoint using the --resume-from option. The teacher model can also be loaded using the --nas-kd-resume-from option.

Important Considerations for NAS

Since the sub-networks are intended to be used on MAX78000/MAX78002, ensure that the full model size of OFA is at least three times larger than the MAX78000/MAX78002 kernel memory size. Likewise, it is good practice to design it deeper and wider than the final network that may be considered suitable for the given task. If the initial model size is too big, it will slow down the training process, and there is a risk that most of the sub-networks exceed the MAX78000/MAX78002 resources. Therefore, 3× to 5× is recommended as the size multiplier for the full model selection.
For the width selection, ensure that widths are multiples of 64 as MAX78000/MAX78002 has 64 processors, and each channel is processed in a separate processor. Using multiples of 64, kernel memory is used more efficiently as widths are searched within [100%, 75%, 50%, 25%] of the initial supernet width selection. Note that these are the default percentages, and they can be changed. Rather than sudden decreases, more granularity and a linear decrease are recommended as this is more suitable for progressive shrinking.
NAS training takes time. It will take days or even weeks depending on the number of sub-networks, the full model size and number of epochs at each stage/level, and the available GPU hardware. It is recommended to watch the loss curves during training and to stop training when the loss fully converges. Then, proceed with the next level using the checkpoint saved from the last level.
The number of batches in each epoch plays an important role in the selection of the number of epochs for each stage/level. If the dataset is ten times bigger and there are ten times more gradient updates, divide the number of epochs by 10 for the same supernet architecture.

NAS Model Definition

The only model architecture implemented in this repository is the sequential model. It is composed of sequential units, which has several sequential FusedConvNdBNReLU with an optional MaxPool layer at the end, and a Linear layer last (see Figure).

All required elastic search strategies are implemented in this model file.

A new model architecture can be implemented by implementing the OnceForAllModel interface. The new model class must implement the following:

sample_subnet_width
reset_width_sampling
get_max_elastic_width_level
sample_subnet_depth
reset_depth_sampling
get_max_elastic_depth_level
sample_subnet_kernel
reset_kernel_sampling
get_max_elastic_kernel_level

NAS Output

The NAS trains floating point models and logs the best model architectures with the highest accuracies. When NAS has completed, a new model file must be created using the new architecture, either by copying the required parameters to post-training quantization, or by initiating quantization-aware training (QAT).

Network Loader (AI8Xize)

The ai8xize network loader currently depends on PyTorch and Nervana’s Distiller. This requirement will be removed in the future.

The network loader creates C code that programs the MAX78000/MAX78002 (for embedded execution, or RTL simulation). Additionally, the generated code contains sample input data and the expected output for the sample, as well as code that verifies the expected output.

The ai8xize.py program needs three inputs:

A quantized checkpoint file, generated by the MAX78000/MAX78002 model quantization program quantize.py, see Quantization.
A YAML description of the network, see YAML Network Description.
A NumPy “pickle” .npy file with sample input data, see Generating a Random Sample Input.

By default, the C code is split into two files: main.c contains the wrapper code, and loads a sample input and verifies the output for the sample input. cnn.c contains functions that are generated for a specific network to load, configure, and run the accelerator. During development, this split makes it easier to swap out only the network while keeping customized wrapper code intact.

Command Line Arguments

The following table describes the most important command line arguments for ai8xize.py. Use --help for a complete list.

Argument	Description	Example
`--help`	Complete list of arguments
Device selection
`--device`	Set device (MAX78000, or MAX78002)	`--device MAX78002`
Hardware features
`--avg-pool-rounding`	Round average pooling results
`--simple1b`	Use simple XOR instead of 1-bit multiplication
Embedded code
`--config-file`	YAML configuration file containing layer configuration	`--config-file cfg.yaml`
`--checkpoint-file`	Checkpoint file containing quantized weights	`--checkpoint-file chk.pth.tar`
`--display-checkpoint`	Show parsed checkpoint data
`--prefix`	Set test name prefix	`--prefix mnist`
`--board-name`	Set the target board (default: `EvKit_V1`)	`--board-name FTHR_RevA`
Code generation
`--overwrite`	Produce output even when the target directory exists (default: abort)
`--compact-weights`	Use memcpy to load weights in order to save code space
`--mexpress`	Use faster kernel loading (default)
`--no-mexpress`	Use alternate kernel loading (slower)
`--mlator`	Use hardware to swap output bytes (useful for large multi-channel outputs)
`--softmax`	Add software Softmax functions to generated code
`--boost`	Turn on a port pin to boost the CNN supply	`--boost 2.5`
`--timer`	Insert code to time the inference using a timer	`--timer 0`
`--no-wfi`	Do not use WFI (wait for interrupt) instructions and do not enter sleep mode when waiting for CNN completion. This is required for very fast, small networks.
`--define`	Additional preprocessor defines	`--define "FAST GOOD"`
MAX78002
`--no-pipeline`	MAX78002 only: Disable the pipeline and run the CNN on the slower APB clock. This reduces power consumption, but increases inference time and in most cases overall energy usage.
`--max-speed`	MAX78002 only: In pipeline mode, load weights and input data on the PLL clock divided by 1 instead of divided by 4. This is approximately 50% faster, but uses 200% of the energy compared to the default settings.
File names
`--c-filename`	Main C file name base (default: main.c)	`--c-filename main.c`
`--api-filename`	API C file name (default: cnn.c)	`--api-filename cnn.c`
`--weight-filename`	Weight header file name (default: weights.h)	`--weight-filename wt.h`
`--sample-filename`	Sample data header file name (default: sampledata.h)	`--sample-filename kat.h`
`--sample-output-filename`	Sample result header file name (default: sampleoutput.h)	`--sample-output-filename katresult.h`
`--sample-input`	Sample data source file name (default: tests/sample_dataset.npy)	`--sample-input kat.npy`
Streaming and FIFOs
`--fifo`	Use FIFOs to load streaming data
`--fast-fifo`	Use fast FIFO to load streaming data
`--fast-fifo-quad`	Use fast FIFO in quad fanout mode (implies --fast-fifo)
RISC-V
`--riscv`	Use RISC-V processor
`--riscv-debug`	Use RISC-V processor and enable the RISC-V JTAG
`--riscv-exclusive`	Use exclusive SRAM access for RISC-V (implies --riscv)
Debug and logging
`-v`, `--verbose`	Verbose output
`--no-log`	Do not redirect stdout to log file (default: enabled)
`--log-intermediate`	Log data between layers
`--log-pooling`	Log unpooled and pooled data between layers in CSV format
`--log-filename`	Log file name (default: log.txt)	`--log-filename run.log`
`-D`, `--debug`	Debug mode
`--debug-computation`	Debug computation (SLOW)
`--stop-after`	Stop after layer	`--stop-after 2`
`--one-shot`	Use layer-by-layer one-shot mechanism
`--ignore-bias-groups`	Do not force `bias_group` to only available x16 quadrants
Streaming tweaks
`--overlap-data`	Allow output to overwrite input
`--override-start`	Override auto-computed streaming start value (x8 hex)
`--increase-start`	Add integer to streaming start value (default: 2)
`--override-rollover`	Override auto-computed streaming rollover value (x8 hex)
`--override-delta1`	Override auto-computed streaming delta1 value (x8 hex)
`--increase-delta1`	Add integer to streaming delta1 value (default: 0)
`--override-delta2`	Override auto-computed streaming delta2 value (x8 hex)
`--increase-delta2`	Add integer to streaming delta2 value (default: 0)
`--ignore-streaming`	Ignore all 'streaming' layer directives
Power saving
`--powerdown`	Power down unused MRAM instances
`--deepsleep`	Put Arm core into deep sleep
Hardware settings
`--input-offset`	First layer input offset (x8 hex, defaults to 0x0000)	`--input-offset 2000`
`--mlator-noverify`	Do not check both mlator and non-mlator output
`--write-zero-registers`	Write registers even if the value is zero
`--init-tram`	Initialize TRAM (compute cache) to 0
`--zero-sram`	Zero memories
`--zero-unused`	Zero unused registers
`--ready-sel`	Specify memory waitstates
`--ready-sel-fifo`	Specify FIFO waitstates
`--ready-sel-aon`	Specify AON waitstates
Various
`--synthesize-input`	Instead of using large sample input data, use only the first `--synthesize-words` words of the sample input, and add N to each subsequent set of `--synthesize-words` 32-bit words	`--synthesize-input 0x112233`
`--synthesize-words`	When using `--synthesize-input`, specifies how many words to use from the input. The default is 8. This number must be a divisor of the total number of pixels per channel.	`--synthesize-words 64`
`--max-verify-length`	Instead of checking all of the expected output data, verify only the first N words	`--max-verify-length 1024`
`--no-unload`	Do not create the `cnn_unload()` function
`--no-kat`	Do not generate the `check_output()` function (disable known-answer test)
`--no-deduplicate-weights`	Do not deduplicate weights and and bias values

YAML Network Description

The quick-start guide provides a short overview of the purpose and structure of the YAML network description file.

If yamllint is installed and available in the shell path, it is automatically run against the configuration file and all warnings and errors are reported. Note: The name of the linter can be changed using the --yamllint command line argument.

The following is a detailed guide into all supported configuration options.

An example network description for the ai85net5 architecture and MNIST is shown below:

---
# CHW (big data) configuration for MNIST
  
arch: ai85net5
dataset: MNIST

# Define layer parameters in order of the layer sequence
layers:
  - pad: 1
    activate: ReLU
    out_offset: 0x2000
    processors: 0x0000000000000001
    data_format: CHW
    op: conv2d
  - max_pool: 2
    pool_stride: 2
    pad: 2
    activate: ReLU
    out_offset: 0
    processors: 0xfffffffffffffff0
    op: conv2d
  - max_pool: 2
    pool_stride: 2
    pad: 1
    activate: ReLU
    out_offset: 0x2000
    processors: 0xfffffffffffffff0
    op: conv2d
  - avg_pool: 2
    pool_stride: 2
    pad: 1
    activate: ReLU
    out_offset: 0
    processors: 0x0ffffffffffffff0
    op: conv2d
  - op: mlp
    flatten: true
    out_offset: 0x1000
    output_width: 32
    processors: 0x0000000000000fff

To generate an embedded MAX78000 demo in the demos/ai85-mnist/ folder, use the following command line:

(ai8x-synthesize) $ python ai8xize.py --verbose --test-dir demos --prefix ai85-mnist --checkpoint-file trained/ai85-mnist.pth.tar --config-file networks/mnist-chw-ai85.yaml --device MAX78000 --compact-data --softmax

Note: For MAX78002, substitute MAX78002 as the --device.

Running this command will combine the network described above with a fully connected software classification layer. The generated code will include all loading, unloading, and configuration steps.

To generate an RTL simulation for the same network and sample data in the directory tests/ai85-mnist-.... (where .... is an autogenerated string based on the network topology), use:

(ai8x-synthesize) $ python ai8xize.py --rtl --verbose --autogen rtlsim --test-dir rtlsim --prefix ai85-mnist --checkpoint-file trained/ai85-mnist.pth.tar --config-file networks/mnist-chw-ai85.yaml --device MAX78000

Network Loader Configuration Language

Network descriptions are written in YAML (see https://en.wikipedia.org/wiki/YAML). There are two sections in each file — global statements and a sequence of layer descriptions.

Note: The network loader automatically checks the configuration file for syntax errors and prints warnings for non-fatal errors if yamllint is installed in the shell search path. To perform the same checks manually, run: yamllint configfile.yaml (to use a different linter, specify --yamllint mylinter).

Purpose of the YAML Network Description

The network description must match the model that was used for training. In effect, the checkpoint file contains the trained weights, and the YAML file contains a description of the network structure. Additionally, the YAML file (sometimes also called “sidecar file”) describes which processors to use (processors) and which offsets to read and write data from (in_offset and out_offset).

Data Memory Ping-Pong

For simple networks with relatively small data dimensions, the easiest way to use the data offsets is by “ping-ponging” between offset 0 and half the memory (offset 0x4000 on MAX78000 or offset 0xA000 on MAX78002). For example, the input is loaded at offset 0, and the first layer produces its output at offset 0x4000. The second layer reads from 0x4000 and writes to 0. Assuming the dimensions are small enough, this easy method avoids overwriting an input that has not yet been consumed by the accelerator.

Global Configuration

`arch` (Mandatory)

arch specifies the network architecture, for example ai84net5. This key is matched against the architecture embedded in the checkpoint file.

`bias` (Optional, Test Only)

The bias configuration is only used for test data. To use bias with trained networks, use the bias parameter in PyTorch’s nn.Module.Conv2d() function. The converter tool will then automatically add bias parameters as needed.

`dataset` (Mandatory)

dataset configures the data set for the network. Data sets are for example mnist, fashionmnist, and cifar-10. This key is descriptive only, it does not configure input or output dimensions or channel count.

`output_map` (Optional)

The global output_map, if specified, overrides the memory instances where the last layer outputs its results. If not specified, this will be either the output_processors specified for the last layer, or, if that key does not exist, default to the number of processors needed for the output channels, starting at 0. Please also see output_processors.

Example: output_map: 0x0000000000000ff0

`unload` (Optional)

By default, the function cnn_unload() is automatically generated from the network’s output layers (typically, the final layer). unload can be used to override the shape and sequence of data copied from the CNN. It is possible to specify multiple unload list items, and they will be processed in the order they are given.

The following keywords are required for each unload list item:

processors: The processors data is copied from channels: Data channel count dim: Data dimensions (1D or 2D) offset: Data source offset width: Data width (optional, defaults to 8) — either 8 or 32 write_gap: Gap between data words (optional, defaults to 0)

`layers` (Mandatory)

layers is a list that defines the per-layer description, as shown below:

Per-Layer Configuration

Each layer in the layers list describes the layer’s processors, convolution type, activation, pooling, weight and output sizes, data input format, data memory offsets, and its processing sequence. Several examples are located in the networks/ and tests/ folders.

`name` (Optional)

name assigns a name to the current layer. By default, layers are referenced by their sequence number. Using name, they can be referenced using a string. Note: “stop” and “input” are reserved names.

Example: name: parallel_1_2

`sequence` (Optional)

This key allows overriding of the processing sequence. The default is 0 for the first layer, or the previous layer’s sequence + 1 for other layers.

sequence numbers may have gaps. The software will sort layers by their numeric value, with the lowest value first.

`next_sequence` (Optional)

On MAX78000, layers are executed sequentially. On MAX78002, this key can optionally be used to specify the next layer (by either using an integer number or a name). stop terminates execution.

Example: next_sequence: final

`processors` (Mandatory)

processors specifies which processors will handle the input data. The processor map must match the number of input channels, and the input data format. For example, in CHW format, processors must be attached to different data memory instances.

processors is specified as a 64-bit hexadecimal value. Dots (‘.’) and a leading ‘0x’ are ignored.

Note: When using multi-pass (i.e., using more than 64 channels), the number of processors is an integer division of the channel count, rounded up to the next multiple of 4. For example, 52 processors are required for 100 channels (since 100 div 2 = 50, and 52 is the next multiple of 4). For best efficiency, use channel counts that are multiples of 4.

Example for three processors 0, 4, and 8: processors: 0x0000.0000.0000.0111

Example for four processors 0, 1, 2, and 3: processors: 0x0000.0000.0000.000f

`output_processors` (Optional)

output_processors specifies which data memory instances and 32-bit word offsets to use for the layer’s output data. When not specified, this key defaults to the next layer’s processors, or, for the last layer, to the global output_map. output_processors is specified as a 64-bit hexadecimal value. Dots (‘.’) and a leading ‘0x’ are ignored.

`out_offset` (Optional)

out_offset specifies the relative offset inside the data memory instance where the output data should be written to. When not specified, out_offset defaults to 0. See also Data Memory Ping-Pong.

Example: out_offset: 0x2000

`in_offset` (Optional)

in_offset specifies the offset into the data memory instances where the input data should be loaded from. When not specified, this key defaults to the previous layer’s out_offset, or 0 for the first layer.

Example: in_offset: 0x2000

`output_width` (Optional)

When not using an activation and when operation is not None/Passthrough, a layer can output 32 bits of unclipped data in Q17.14 format. Typically, this is used for the last layer. The default is 8 bits. Note that the corresponding model’s layer must be trained with wide=True when output_width is 32.

Example: output_width: 32

`data_format` (Optional)

When specified for the first layer only, data_format can be either chw/big or hwc/little. The default is hwc. Note that the data format interacts with processors, see Channel Data Formats.

`operation`

This key (which can also be specified using op, operator, or convolution) selects a layer’s main operation after the optional input pooling. When this key is not specified, a warning is displayed, and Conv2d is selected.

Operation	Description
`Conv1d`	1D convolution over an input composed of several input planes
`Conv2d`	2D convolution over an input composed of several input planes
`ConvTranspose2d`	2D transposed convolution (upsampling) over an input composed of several input planes
`None` or `Passthrough`	No operation (note: input and output processors must be the same)
`Linear` or `FC` or `MLP`	Linear transformation to the incoming data (fully connected layer)
`Add`	Element-wise addition
`Sub`	Element-wise subtraction
`BitwiseXor` or `Xor`	Element-wise binary XOR
`BitwiseOr` or `Or`	Element-wise binary OR

Element-wise operations default to two operands. This can be changed using the operands key.

`eltwise` (Optional)

Element-wise operations can also be added “in-flight” to Conv2d. In this case, the element-wise operation is specified using the eltwise key. Note: On MAX78000, this is only supported for 64 channels, or up to 128 channels when only two operands are used. Use a separate layer for the element-wise operation when more operands or channels are needed instead of combining the element-wise operator with a convolution.

Example: eltwise: add

`dilation` (Optional)

Specifies the dilation for Conv1d/Conv2d operations (default: 1). Note: Conv2d dilation is only supported on MAX78002.

Example: dilation: 7

`groups` (Optional)

By default, Conv1d and Conv2d are configured with groups=1, a “full” convolution. On MAX78002 only, depthwise separable convolutions can be specified using groups=channels (input channels must match the output channels).

Example: op: conv2d groups: 64

`pool_first` (Optional)

When using both pooling and element-wise operations, pooling is performed first by default. Optionally, the element-wise operation can be performed before the pooling operation by setting pool_first to False.

Example: pool_first: false

`operands` (Optional)

For any element-wise operation, this key configures the number of operands from 2 to 16 inclusive. The default is 2.

Example: operation: add operands: 4

`activate` (Optional)

This key describes whether to activate the layer output (the default is to not activate). When specified, this key must be ReLU, Abs or None (the default). Please note that there is always an implicit non-linearity when outputting 8-bit data since outputs are clamped to $[–1, +127/128]$, see activation functions.

output_shift can be used for (limited) “linear” activation.

`quantization` (Optional)

This key describes the width of the weight memory in bits and can be 1, 2, 4, 8, or binary (MAX78002 only). Specifying a quantization that is smaller than what the weights require results in an error message. The default value is based on the weight_bits field in state_dict read from the quantized checkpoint for the layer.

On MAX78002 only, binary sets the alternate 1-bit representation of –1/+1.

Example: quantization: 4

`output_shift` (Optional)

When output_width is 8, the 32-bit intermediate result can be shifted left or right before reduction to 8-bit. The value specified here is cumulative with the value generated from and used by quantization. Note that output_shift is not supported for passthrough layers.

The 32-bit intermediate result is multiplied by $2^{totalshift}$, where the total shift count must be within the range $[-15, +15]$, resulting in a factor of $[2^{–15}, 2^{15}]$ or $[0.0000305176$ to $32768]$.

weight quantization	shift used by quantization	available range for `output_shift`
8-bit	0	$[-15, +15]$
4-bit	4	$[-19, +11]$
2-bit	6	$[-21, +9]$
1-bit	7	$[-22, +8]$

Using output_shift can help normalize data, particularly when using small weights. By default, output_shift is generated by the training software, and it is used for batch normalization as well as quantization-aware training.

Note: When using 32-bit wide outputs in the final layer, no hardware shift is performed and output_shift is ignored.

Example: output_shift: 2

`kernel_size` (Optional)

For Conv2d, this key must be 3x3 (the default) or 1x1.
For Conv1d, this key must be 1 through 9.
For ConvTranspose2d, this key must be 3x3 (the default).

Example: kernel_size: 1x1

`stride` (Optional)

This key must be 1 or [1, 1].

`pad` (Optional)

pad sets the padding for the convolution.

For Conv2d, this value can be 0, 1 (the default), or 2.
For Conv1d, the value can be 0, 1, 2, or 3 (the default).
For ConvTranspose2d, this value can be 0, 1 (the default), or 2. Note that the value follows PyTorch conventions and effectively adds (kernel_size – 1) – pad amount of zero padding to both sizes of the input, so “0” adds 2 zeros each and “2” adds no padding.
For Passthrough, this value must be 0 (the default).

`max_pool` (Optional)

When specified, performs a MaxPool before the convolution. The pooling size can be specified as an integer (when the value is identical for both dimensions, or for 1D convolutions), or as two values in order [H, W].

Example: max_pool: 2

`avg_pool` (Optional)

When specified, performs an AvgPool before the convolution. The pooling size can be specified as an integer (when the value is identical for both dimensions, or for 1D convolutions), or as two values in order [H, W].

Example: avg_pool: 2

`pool_dilation` (Optional)

When performing a pooling operation on MAX78002, this key describes the pool dilation. The pooling dilation can be specified as an integer (when the value is identical for both dimensions, or for 1D convolutions), or as two values in order [H, W]. The default is 1 or [1, 1].

Example: pool_dilation: [2, 1]

`pool_stride` (Optional)

When performing a pooling operation, this key describes the pool stride. The pooling stride can be specified as an integer (when the value is identical for both dimensions, or for 1D convolutions), or as two values in order [H, W], where both values must be identical. The default is 1 or [1, 1].

Example: pool_stride: [2, 2]

`in_channels` (Optional)

in_channels specifies the number of channels of the input data. This is usually automatically computed based on the weights file and the layer sequence. This key allows overriding of the number of channels. See also: in_dim.

Example: in_channels: 8

`in_dim` (Optional)

in_dim specifies the dimensions of the input data. This is usually automatically computed based on the output of the previous layer or the layer(s) referenced by in_sequences. This key allows overriding of the automatically calculated dimensions. in_dim must be used when changing from 1D to 2D data or vice versa. 1D dimensions can be specified as a tuple [L, 1] or as an integer L.

`in_crop` (Optional)

in_crop specifies a number of rows (2D) or data bytes (1D) to skip (crop) when using the previous layer's output as input. By also adjusting in_offset, this provides the means to crop the top/bottom of an image or the beginning/end of 1D data. The dimensions and offsets are validated to match (minus the crop amount).

`in_sequences` (Optional)

By default, a layer’s input is the output of the previous layer. in_sequences can be used to point to the output of one or more arbitrary previous layers, for example when processing the same data using two different kernel sizes, or when combining the outputs of several prior layers. in_sequences can be specified as a single item (for a single input) or as a list (for multiple inputs). Both layer sequence numbers as well as layer names can be used. As a special case, -1 or input refer to the input data. The in_offset and out_offset must be set to match the specified sequence.

Multiple Arguments (Element-wise Operations)

in_sequences is used to specify the inputs for a multi-operand element-wise operator (for example, add). The output processors for all arguments of the sequence must match.

Layer Concatenation

in_sequences can also be used to specify concatenation similar to torch.cat().

The output processors must be adjacent for all sequence arguments, and arguments listed earlier must use lower processor numbers than arguments listed later. The order of arguments of in_sequences must match the model. The following code shows an example forward function for a model that concatenates two values:

def forward(self, x):
    x = self.conv0(x)  # Layer 0
    y = self.conv1(x)  # Layer 1
    y = torch.cat((y, x), dim=1)

In this case, in_sequences would be [1, 0] since y (the output of layer 1) precedes x (the output of layer 0) in the torch.cat() statement.

Examples: in_sequences: [2, 3] in_sequences: [expand_1x1, expand_3x3]

See the Fire example for a network that uses in_sequences.

`out_channels` (Optional)

out_channels specifies the number of channels of the output data. This is usually automatically computed based on the weights and layer sequence. This key allows overriding the number of output channels.

Example: out_channels: 8

`streaming` (Optional)

streaming specifies that the layer is using streaming mode. This is necessary when the input data dimensions exceed the available data memory. When enabling streaming, all prior layers have to enable streaming as well. streaming can be enabled for up to 8 layers.

Example: streaming: true

`flatten` (Optional)

flatten specifies that 2D input data should be transformed to 1D data for use by a Linear layer. Note that flattening cannot be used in the same layer as pooling.

Example: flatten: true

`write_gap` (Optional)

write_gap specifies the number of channels that should be skipped during write operations (this value is multiplied with the output multi-pass, i.e., write every nth word where n = write_gap × output_multipass). This creates an interleaved output that can be used as the input for subsequent layers that use an element-wise operation, or to concatenate multiple inputs to form data with more than 64 channels. The default is 0.

Set write_gap to 1 to produce output for a subsequent two-input element-wise operation.

Example: write_gap: 1

`read_gap` (Optional)

On MAX78002 only, when multi-pass is not used (i.e., typically 64 input channels or less), data can be fetched while skipping bytes. This allows a layer to directly consume data produced by a layer with write_gap without the need for intermediate layers. The default is 0.

Example: read_gap: 1

`bias_group` (Optional)

For layers that use a bias, this key can specify one or more bias memories that should be used. By default, the software uses a “Fit First Descending (FFD)” allocation algorithm that considers the largest bias lengths first, and then the layer number, and places each bias in the available quadrant with the most available space, descending to the smallest bias length.

“Available quadrants” is the complete list of quadrants used by the network (in any layer). bias_group must reference one or more of these available quadrants.

bias_group can be a list of integers or a single integer.

Example: bias_group: 0

`output` (Optional)

By default, the final layer is used as the output layer. Output layers are checked using the known-answer test, and they are copied from hardware memory when cnn_unload() is called. The tool also checks that output layer data isn’t overwritten by any later layers.

When specifying output: true, any layer (or a combination of layers) can be used as an output layer. Note: When unload: is used, output layers are not used for generating cnn_unload().

Example: output: true

`weight_source` (Optional)

Certain networks share weights between layers. The tools automatically deduplicate weights and bias values (unless --no-deduplicate-weights is specified). When the checkpoint file does not contain duplicated weights, weight_source: layer is needed in the YAML configuration for the layer(s) that reuse(s) weights. layer can be specified as layer number or name.

Example: weight_source: conv1p3

Rolling Buffers

Certain networks (such as TCN) require rolling data buffers. These are implemented in the YAML file (for a complete example, please see networks/ai85-kinetics-actiontcn.yaml).

`data_buffer` (Global)

The data buffer is allocated and named using the global data_buffer configuration key. processor, dim (1D or 2D), channels, and offset must be defined.

Example:

data_buffer:
  - processors: 0xffffffff00000000
    dim: 15
    channels: 32
    offset: 0x7fc4
    name: tcn_buffer

`buffer_shift` (per layer)

The buffer is shifted n places using buffer_shift: n. in_offset and in_dim are required.

Example:

- processors: 0xffffffff00000000
    output_processors: 0xffffffff00000000
    in_offset: 0x7FC8
    in_channels: 32
    in_dim: 14
    in_sequences: tcn_buffer
    out_offset: 0x7fc4
    operation: passthrough
    buffer_shift: 1
    name: buffer_shift

`buffer_insert` (per layer)

New data is added using buffer_insert: n.

Example:

 - processors: 0xffffffffffffffff
    output_processors: 0xffffffff00000000
    in_offset: 0x5000
    out_offset: 0x7FFC
    operation: Conv2d
    in_sequences: res4_out
    buffer_insert: 1
    kernel_size: 3x3
    pad: 0
    activate: ReLU
    name: conv5

Buffer use

The buffer is used with in_sequences, in the example in_sequences: tcn_buffer. To use the buffer contents as input, in_offset and in_dim are required.

Dropout and Batch Normalization

Dropout is only used during training, and corresponding YAML entries are not needed.
Batch normalization (“batchnorm”) is fused into the preceding layer’s weights and bias values (see Batch Normalization), and YAML entries are not needed.

Example

The following shows an example for a single “Fire” operation, the MAX78000/MAX78002 hardware layer numbers and its YAML description.

---
arch: ai85firetestnet
dataset: CIFAR-10
# Input dimensions are 3x32x32

layers:
  ### Fire
  # Squeeze (0)
  - avg_pool: 2
    pool_stride: 2
    pad: 0
    in_offset: 0x1000
    processors: 0x0000000000000007
    data_format: HWC
    out_offset: 0x0000
    operation: conv2d
    kernel_size: 1x1
    activate: ReLU
  # Expand 1x1 (1)
  - in_offset: 0x0000
    out_offset: 0x1000
    processors: 0x0000000000000030
    output_processors: 0x0000000000000f00
    operation: conv2d
    kernel_size: 1x1
    pad: 0
    activate: ReLU
    name: expand_1x1
  # Expand 3x3 (2)
  - in_offset: 0x0000
    out_offset: 0x1000
    processors: 0x0000000000000030
    output_processors: 0x000000000000f000
    operation: conv2d
    kernel_size: 3x3
    activate: ReLU
    in_sequences: 0
    name: expand_3x3
  # Concatenate (3)
  - max_pool: 2
    pool_stride: 2
    in_offset: 0x1000
    out_offset: 0x0000
    processors: 0x000000000000ff00
    operation: none
    in_sequences: [expand_1x1, expand_3x3]
  ### Additional layers (4, 5)
  - max_pool: 2
    pool_stride: 2
    out_offset: 0x1000
    processors: 0x000000000000ff00
    operation: none
  - flatten: true
    out_offset: 0x0000
    op: mlp  # The fully connected (FC) layer L5
    processors: 0x000000000000ff00
    output_width: 32

Residual Connections

Many networks use residual connections. In the following example, the convolution on the right works on the output data of the first convolution. However, that same output data also “bypasses” the second convolution and is added to the output.

On MAX78000/MAX78002, the element-wise addition works on “interleaved data,” i.e., each machine fetch gathers one operand.

In order to achieve this, a layer must be inserted that does nothing else but reformat the data into interleaved format using the write_gap keyword (this operation happens in parallel and is fast).

---
...
layers:
  ...
  # Layer I
  - out_offset: 0x0000
    processors: 0x0ffff00000000000
    operation: conv2d
    kernel_size: 3x3
    pad: 1
    activate: ReLU
  
  # Layer II - re-format data with gap
  - out_offset: 0x2000
    processors: 0x00000000000fffff
    output_processors: 0x00000000000fffff
    operation: passthrough
    write_gap: 1
    name: layerII
  
  # Layer III
  - in_offset: 0x0000
    out_offset: 0x2004
    processors: 0x00000000000fffff
    operation: conv2d
    kernel_size: 3x3
    pad: 1
    activate: ReLU
    write_gap: 1
    name: layerIII
  
  # Layer IV - Residual
  - in_sequences: [layerII, layerIII]
    in_offset: 0x2000
    out_offset: 0x0000
    processors: 0x00000000000fffff
    eltwise: add
    ...

The same network can also be viewed graphically:

Adding New Models and New Datasets to the Network Loader

Adding new datasets to the Network Loader is implemented as follows:

Provide the network model, its YAML description and weights. Place the YAML file (e.g., new.yaml) in the networks directory, and weights in the trained directory. The non-quantized weights are obtained from a training checkpoint, for example: (ai8x-synthesis) $ cp ../ai8x-training/logs/2020.06.02-154133/best.pth.tar trained/new-unquantized.pth.tar

When using post-training quantization, the quantized weights are the result of the quantization step. Copy and customize an existing quantization shell script, for example: (ai8x-synthesis) $ cp scripts/quantize_mnist.sh scripts/quantize_new.sh

Then, edit this script to point to the new model and dataset (vi scripts/quantize_new.sh), and call the script to generate the quantized weights. Example:

(ai8x-synthesis) $ scripts/quantize_new.sh 
Configuring device: MAX78000.
Reading networks/new.yaml to configure network...
Converting checkpoint file trained/new-unquantized.pth.tar to trained/new.pth.tar
+----------------------+-------------+----------+
| Key                  | Type        | Value    |
|----------------------+-------------+----------|
| arch                 | str         | ai85net5 |
| compression_sched    | dict        |          |
| epoch                | int         | 165      |
| extras               | dict        |          |
| optimizer_state_dict | dict        |          |
| optimizer_type       | type        | SGD      |
| state_dict           | OrderedDict |          |
+----------------------+-------------+----------+
Model keys (state_dict):
conv1.conv2d.weight, conv2.conv2d.weight, conv3.conv2d.weight, conv4.conv2d.weight, fc.linear.weight, fc.linear.bias
conv1.conv2d.weight avg_max: tensor(0.3100) max: tensor(0.7568) mean: tensor(0.0104) factor: 54.4 bits: 8
conv2.conv2d.weight avg_max: tensor(0.1843) max: tensor(0.2897) mean: tensor(-0.0063) factor: 108.8 bits: 8
conv3.conv2d.weight avg_max: tensor(0.1972) max: tensor(0.3065) mean: tensor(-0.0053) factor: 108.8 bits: 8
conv4.conv2d.weight avg_max: tensor(0.3880) max: tensor(0.5299) mean: tensor(0.0036) factor: 108.8 bits: 8
fc.linear.weight avg_max: tensor(0.6916) max: tensor(0.9419) mean: tensor(-0.0554) factor: 108.8 bits: 8
fc.linear.bias

Provide a sample input. The sample input is used to generate a known-answer test (self test) against the predicted label. The purpose of the sample input is to ensure that the generated code matches the model — it does not ensure that the model is of good quality. However, it can help finding issues in the YAML description of the model.

The sample input is provided as a NumPy “pickle” — add sample_dset.npy for the dataset named dset to the tests directory. This file can be generated by saving a sample in CHW format (no batch dimension) using numpy.save(), see below.

For example, the MNIST 1×28×28 image sample would be stored in tests/sample_mnist.npy in an np.array with shape [1, 28, 28] and datatype >i8 (np.int64). The file can contain random integers, or it can be obtained from the train.py software.

Note: To convert an existing sample input file to np.int64, use the tests/convert_sample.py script.

Generating a Random Sample Input

To generate a random sample input, use a short NumPy script. In the grayscale MNIST example:

import os
import numpy as np

a = np.random.randint(-128, 127, size=(1, 28, 28), dtype=np.int64)
np.save(os.path.join('tests', 'sample_mnist'), a, allow_pickle=False, fix_imports=False)

For RGB image inputs, there are three channels. For example, a 3×80×60 (C×H×W) input is created using size=(3, 80, 60). Note: The array must be of data type np.int64.

Saving a Sample Input from Training Data

In the ai8x-training project, add the argument --save-sample 10 to the scripts/evaluate_mnist.sh script. Note: The index 10 is arbitrary, but it must be smaller than the batch size. If manual visual verification is desired, it is a good idea to pick a sample where the quantized model computes the correct answer.
Run the modified scripts/evaluate_mnist.sh. It will produce a file named sample_mnist.npy.
Save the sample_mnist.npy file and copy it to the ai8x-synthesis project.

Evaluate the Quantized Weights with the New Dataset and Model

Switch to training project directory and activate the environment:

(ai8x-synthesis) $ deactivate
$ cd ../ai8x-training
$ source venv/bin/activate

Create an evaluation script and run it:

(ai8x-training) $ cp scripts/evaluate_mnist.sh scripts/evaluate_new.sh
(ai8x-training) $ vim scripts/evaluate_new.sh
(ai8x-training) $ scripts/evaluate_new.sh

Example output:

(ai8x-training) $ scripts/evaluate_new.sh 
Configuring device: MAX78000, simulate=True.
Log file for this run: logs/2020.06.03-125328/2020.06.03-125328.log
--------------------------------------------------------
Logging to TensorBoard - remember to execute the server:
> tensorboard --logdir='./logs'

=> loading checkpoint ../ai8x-synthesis/trained/new.pth.tar
=> Checkpoint contents:
+----------------------+-------------+----------+
| Key                  | Type        | Value    |
|----------------------+-------------+----------|
| arch                 | str         | ai85net5 |
| compression_sched    | dict        |          |
| epoch                | int         | 165      |
| extras               | dict        |          |
| optimizer_state_dict | dict        |          |
| optimizer_type       | type        | SGD      |
| state_dict           | OrderedDict |          |
+----------------------+-------------+----------+

=> Checkpoint['extras'] contents:
+-----------------+--------+-------------------+
| Key             | Type   | Value             |
|-----------------+--------+-------------------|
| best_epoch      | int    | 165               |
| best_top1       | float  | 99.46666666666667 |
| clipping_method | str    | SCALE             |
| clipping_scale  | float  | 0.85              |
| current_top1    | float  | 99.46666666666667 |
+-----------------+--------+-------------------+

Loaded compression schedule from checkpoint (epoch 165)
=> loaded 'state_dict' from checkpoint '../ai8x-synthesis/trained/new.pth.tar'
Optimizer Type: <class 'torch.optim.sgd.SGD'>
Optimizer Args: {'lr': 0.1, 'momentum': 0.9, 'dampening': 0, 'weight_decay': 0.0001, 'nesterov': False}
Dataset sizes:
  training=54000
  validation=6000
  test=10000
--- test ---------------------
10000 samples (256 per mini-batch)
Test: [   10/   40]    Loss 44.193750    Top1 99.609375    Top5 99.960938    
Test: [   20/   40]    Loss 66.567578    Top1 99.433594    Top5 99.980469    
Test: [   30/   40]    Loss 51.816276    Top1 99.518229    Top5 99.986979    
Test: [   40/   40]    Loss 53.596094    Top1 99.500000    Top5 99.990000    
==> Top1: 99.500    Top5: 99.990    Loss: 53.596

==> Confusion:
[[ 979    0    0    0    0    0    0    0    1    0]
 [   0 1132    1    0    0    0    0    2    0    0]
 [   2    0 1026    1    0    0    0    3    0    0]
 [   0    0    0 1009    0    0    0    0    1    0]
 [   0    0    0    0  978    0    0    0    0    4]
 [   1    0    0    3    0  886    1    0    0    1]
 [   5    4    1    0    1    0  946    0    1    0]
 [   0    1    3    0    0    0    0 1023    0    1]
 [   0    0    0    1    1    1    0    0  970    1]
 [   0    0    0    0    4    1    0    3    0 1001]]

Log file for this run: logs/2020.06.03-125328/2020.06.03-125328.log

Generating C Code

Run ai8xize.py with the new network and the new sample data to generate embedded C code that can be compiled with the Arm and RISC-V compilers. See gen-demos-max78000.sh for examples.

Starting an Inference, Waiting for Completion, Multiple Inferences in Sequence

An inference is started by configuring registers and weights, loading the input, and enabling processing. This code is automatically generated — see the cnn_init(), cnn_load_weights(), cnn_load_bias(), cnn_configure(), and load_input() functions. The sample data can be used as a self-checking feature on device power-up since the output for the sample data is known. To start the accelerator, use cnn_start(). The load_input() function is called either before cnn_start(), or after cnn_start(), depending on whether FIFOs are used. To run a second inference with new data, call cnn_start() again (after or before loading the new data input using load_input()`).

The MAX78000/MAX78002 accelerator can generate an interrupt on completion, and it will set a status bit (see cnn.c). The resulting data can now be unloaded from the accelerator (code for this is also auto-generated in cnn_unload()).

To run another inference, ensure all quadrants are disabled (stopping the state machine, as shown in cnn_init()). Next, load the new input data and start processing.

Overview of the Functions in main.c

The generated code is split between API code (in cnn.c) and data-dependent code in main.c or main_riscv.c. The data-dependent code is based on a known-answer test. The main() function shows the proper sequence of steps to load and configure the CNN accelerator, run it, unload it, and verify the result.

void load_input(void); Load the example input. This function can serve as a template for loading data into the CNN accelerator. Note that the clocks and power to the accelerator must be enabled first. If this is skipped, the device may appear to hang and the recovery procedure may have to be used.

int check_output(void); This function verifies that the known-answer test works correctly in hardware (using the example input). This function is typically not needed in the final application.

int main(void); This is the main function and can serve as a template for the user application. It shows the correct sequence of operations to initialize, load, run, and unload the CNN accelerator.

Overview of the Generated API Functions

The API code (in cnn.c by default) is auto-generated. It is data-independent, but differs depending on the network. This simplifies replacing the network while keeping the remainder of the code intact.

The functions that do not return void return either CNN_FAIL or CNN_OK as specified in the auto-generated cnn.h header file. The header file also contains a definition for the number of outputs of the network (CNN_NUM_OUTPUTS). In limited circumstances, this can make the wrapper code somewhat network-independent.

int cnn_enable(uint32_t clock_source, uint32_t clock_divider); Enable clocks (from clock_source with clock_divider) and power to the accelerator; also enable the accelerator interrupt. By default, on MAX78000, the accelerator runs at 50 MHz (APB clock or PCLK divided by 1). On MAX78002, by default the MDLL is enabled and the accelerator runs at 200 MHz.

int cnn_disable(void); Disable clocks and power to the accelerator.

int cnn_init(void); Perform minimum accelerator initialization so it can be configured or restarted.

int cnn_configure(void); Configure the accelerator for the given network.

int cnn_load_weights(void); Load the accelerator weights. cnn_init() must be called before loading weights after reset or wake from sleep. Note that the physical weight memories are 72-bit wide. When --mexpress mode is enabled (default), the weight data is written in a sequence of 32-bit writes, containing the “packed” weight values. When using --no-mexpress, each weight memory is written in four 32-bit memory writes, with zero-padded data.

int cnn_verify_weights(void); Verify the accelerator weights (used for debug only).

int cnn_load_bias(void); Load the accelerator bias values (if needed). Unlike accelerator weights, bias values cannot be retained after calling cnn_disable(). Therefore, this function must be called again after the accelerator is re-enabled. Note: The bias values are stored in 8-bit software arrays, but the physical memories require 32-bit access. The helper function memcpy_8to32() performs the expansion from 8 to 32-bit.

int cnn_start(void); Start accelerator processing.

int cnn_stop(void); Force-stop the accelerator regardless of whether it has finished or not.

int cnn_continue(void); Continue accelerator processing after force-stopping it.

int cnn_unload(uint32_t *out_buf); Unload the results from the accelerator. The output buffer must be 32-bit aligned (round up to the next 32-bit size when using 8-bit outputs).

int cnn_boost_enable(mxc_gpio_regs_t *port, uint32_t pin); Turn on the boost circuit on port.pin. This is only needed for very energy intense networks. Use the --boost command line option to insert calls to this function in the wrapper code.

int cnn_boost_disable(mxc_gpio_regs_t *port, uint32_t pin); Turn off the boost circuit connected to port.pin.

Softmax, and Data Unload in C

ai8xize.py can generate a call to a software Softmax function using the command line switch --softmax. That function is provided in the assets/device-all folder. To use the provided software Softmax on MAX78000/MAX78002, the last layer output should be 32-bit wide (output_width: 32).

The software Softmax function is optimized for processing time, and it quantizes the input. When the last layer uses weights that are not 8-bits, the software function used will shift the input values first.

Generated Files and Upgrading the CNN Model

The generated C code comprises the following files. Some of the files are customized based on the project name, and some are custom for a combination of project name and weight/sample data inputs:

File name	Source	Project specific?	Model/weights change?
Makefile*	template(s) in assets/embedded-*	Yes	No
cnn.c	generated	Yes	Yes
cnn.h	template in assets/device-all	Yes	Yes
weights.h	generated	Yes	Yes
log.txt	generated	Yes	Yes
main.c	generated	Yes	No
sampledata.h	generated	Yes	No
sampleoutput.h	generated	Yes	Yes
softmax.c	assets/device-all	No	No
model.launch	template in assets/eclipse	Yes	No
.cproject	template in assets/eclipse	Yes	No
.project	template in assets/eclipse	Yes	No
.settings/*	templates in assets/eclipse/.settings	Yes	No
.vscode/*	generated and templates in assets/vscode	Yes	No

In order to upgrade an embedded project after retraining the model, point the network generator to a new empty directory and regenerate. Then, copy the four files that will have changed to your original project — cnn.c, cnn.h, weights.h, and log.txt. This allows for persistent customization of the I/O code and project (for example, in main.c and additional files) while allowing easy model upgrades.

The generator also adds all files from the assets/eclipse, assets/device-all, and assets/embedded-* folders. These files (when starting with template in their name) will be automatically customized to include project-specific information as shown in the following table:

Key	Replaced by
`##__PROJ_NAME__##`	Project name (works on file names as well as the file contents), from `--prefix`
`##__ELF_FILE__##`	Output elf (binary) file name (`PROJECT.elf` or `PROJECT-combined.elf`)
`##__BOARD__##`	Board name (e.g., `EvKit_V1`), from `--board-name`
`##__FILE_INSERT__##`	Network statistics and timer
`##__OPENOCD_PARAMS__##`	OpenOCD arguments (e.g., `-f interface/cmsis-dap.cfg -f target/max7800x.cfg`), from `--eclipse-openocd-args`
`##__TARGET_UC__##`	Upper case device name (e.g., `MAX78000`), from `--device`
`##__TARGET_LC__##`	Lower case device name (e.g., `max78000`), from `--device`
`##__ADDITIONAL_INCLUDES__##`	Additional include files, from `--eclipse-includes` (default: empty)
`##__GCC_PREFIX__##`	`arm-non-eabi-` or `riscv-none-elf-`
`##__DEFINES__##` or `##__GCC_SUFFIX__##`	Additional #defines (e.g., `-D SUPERSPEED`), from `--define` (default: empty)
`##__DEFINES_ARM__##` or `##__ARM_DEFINES__##`	Replace default ARM #defines, from `--define-default-arm` (default: `"MXC_ASSERT_ENABLE ARM_MATH_CM4"`)
`##__DEFINES_RISCV__##` or `##__RISC_DEFINES__##`	Replace default RISC-V #defines, from `--define-default-riscv` (default: `"MXC_ASSERT_ENABLE RV32"`)
`##__PROCESSOR_DEFINES__##`	Selects the #defines for the active processor (Arm or RISC-V)
`##__ADDITIONAL_VARS__##`	Additional variables, from `--eclipse-variables` (default: empty)
`##__PMON_GPIO_PINS__##`	Power Monitor GPIO pins
`##__CNN_START__##`	Port pin action when CNN starts
`##__CNN_COMPLETE__##`	Port pin action when CNN finishes
`##__SYS_START__##`	Port pin action when system starts
`##__SYS_COMPLETE__##`	Port pin action when system finishes

Note: The vscode templates are treated differently and not designed to be modified by the user.

Contents of the device-all Folder

For MAX78000/MAX78002, the software Softmax is implemented in softmax.c.
A template for the cnn.h header file in templatecnn.h. The template is customized during code generation using model statistics and timer, but uses common function signatures for all projects.

Determining the Compiled Flash Image Size

The generated .elf file (either build/PROJECT.elf or build/PROJECT-combined.elf when building for RISC-V) contains debug and other meta information. To determine the true Flash image size, either examine the .map file, or convert the .elf to a binary image and examine the resulting image.

% arm-none-eabi-objcopy -I elf32-littlearm build/mnist.elf -O binary temp.bin                     
% ls -la temp.bin
-rwxr-xr-x  1 user  staff  321968 Jan  1 11:11 temp.bin

Troubleshooting

Handling Linker Flash Section Overflows

When linking the generated C code, the code space might overflow:

$ make
  CC    main.c
  CC    cnn.c
  ...
  LD    build/mnist.elf 
arm-none-eabi/bin/ld: build/mnist.elf section `.text' will not fit in region `FLASH'
arm-none-eabi/bin/ld: region `FLASH' overflowed by 600176 bytes
collect2: error: ld returned 1 exit status

The most likely reason is that the input is too large (from sampledata.h), or that the expected output (in sampleoutput.h) is too large. It is important to note that this only affects the generated code with the built-in known-answer test (KAT) that will not be part of the user application since normal input and output data are not predefined in Flash memory.

To deal with this issue, there are several options:

The sample input data can be stored in external memory. This requires modifications to the generated code. Please see the MSDK examples to learn how to access external memory.
The sample input data can be programmatically generated. Typically, this requires manual modification of the generated code, and a corresponding modification of the sample input file. The generator also contains a built-in generator (supported only when using --fifo, and only for HWC inputs); the command line option --synthesize-input uses only the first few words of the sample input data, and then adds the specified value N (for example, 0x112233 if three input channels are used) to each subsequent set of M 32-bit words. M can be specified using --synthesize-words and defaults to 8. Note that M must be a divisor of the number of pixels per channel.
The output check can be truncated. The command line option --max-verify-length checks only the first N words of output data (for example, 1024). To completely disable the output check, use --no-kat.
For 8-bit output values, --mlator typically generates more compact code.
Change the compiler optimization level in Makefile. To change the default optimization levels, modify MXC_OPTIMIZE_CFLAGS in assets/embedded-ai85/templateMakefile for Arm code and assets/embedded-riscv-ai85/templateMakefile.RISCV for RISC-V code. Both -O1 and -Os may result in smaller code compared to -O2.
If the last layer has large-dimension, large-channel output, the cnn_unload() code in cnn.c may cause memory segment overflows not only in Flash, but also in the target buffer in SRAM (ml_data32[] or ml_data[] in main.c). In this case, manual code edits are required to perform multiple partial unloads in sequence.

Known-Answer-Test (KAT): Console Does Not Print PASS/FAIL

In some cases, the serial console does not print PASS or FAIL for the known-answer test, for example:

Waiting...

*** CNN Inference Test ***

[nothing]

A connected debugger will disconnect, similar to:

Program stopped.
0x0000fff4 in ?? ()

This can be caused by very small, fast networks, where the inference finishes before the main code has entered sleep mode:

 while (cnn_time == 0)
    // CNN has already finished or is about to finish
    MXC_LP_EnterSleepMode(); // Wait for CNN
    // Device will not wake up since the CNN complete interrupt has already happened

Solution: Please use the command line switch --no-wfi to disable sleep mode.

Known-Answer-Test (KAT) Failures – Debugging Techniques

There can be many reasons why the known-answer test (KAT) fails for a given network with an error message, or where the KAT does not complete. The following techniques may help in narrowing down where in the network or the YAML description of the network the error occurs:

For very short and small networks, disable the use of WFI (wait for interrupt) instructions while waiting for completion of the CNN computations by using the command line option --no-wfi. Explanation: In these cases, the network terminates more quickly than the time it takes between testing for completion and executing the WFI instruction, so the WFI instruction is never interrupted and the code may appear to hang.
The --no-wfi option can also be useful when trying to debug code, since the debugger loses connection when the device enters sleep mode using __WFI().
By default, there is a two-second delay at the beginning of the code. This time allows the debugger to take control before the device enters any kind of sleep mode. --no-wfi disables sleep mode (see also the related information above). The time delay can be modified using the --debugwait option. If the delay is too short or skipped altogether, and the device does not wake at the end of execution, the device may appear to hang and the recovery procedure may have to be used in order to load new code or to debug code.
For very large and deep networks, enable the boost power supply using the --boost command line option. On the EVkit, the boost supply is connected to port pin P2.5, so the command line option is --boost 2.5.
The default compiler optimization level is -O2, and incorrect code may be generated under rare circumstances. Lower the optimization level in the generated Makefile to -O1, clean (make distclean && make clean), and rebuild the project (make). If this solves the problem, one of the possible reasons is that code is missing the volatile keyword for certain variables. To permanently adjust the default compiler optimization level, modify MXC_OPTIMIZE_CFLAGS in assets/embedded-ai85/templateMakefile for Arm code and assets/embedded-riscv-ai85/templateMakefile.RISCV for RISC-V code.
When allocating large amounts of data on the stack, ensure the stack is sized appropriately. The stack size is configured in the linker file (by default, part of the MSDK).
--stop-after N where N is a layer number may help to find the problematic layer by terminating the network early without having to retrain and without having to change the weight input file. Note that this may also require --max-verify-length as described above since intermediate outputs tend to be large, and additionally --no-unload to suppress generation of the cnn_unload() function.
--no-bias LIST where LIST is a comma-separated list of layers (e.g., 0,1,2,3) can rule out problems due to the bias. This option zeros out the bias for the given layers without having to remove bias values from the weight input file.
--ignore-streaming ignores all streaming statements in the YAML file. Note that this typically only works when the sample input is replaced with a different, lower-dimension sample input (for example, use 3×32×32 instead of 3×128×128), and does not support fully connected layers without retraining (use --stop-after to remove final layers). Ensure that the network (or partial network when using --stop-after) does not produce all-zero intermediate data or final outputs when using reduced-dimension inputs. The log file (log.txt by default) will contain the necessary information.
Certain C library functions (such as memcpy or printf) use byte-wide or 16-bit wide accesses and may not work correctly when accessing CNN memory directly (i.e., pointing inside the accelerator memory). They will function as expected when operating on data memory that is not located inside the CNN accelerator, for example data returned by cnn_unload().

Synthesis Failures

The synthesis step (“izer”) will fail if the yaml description does not match the checkpoint file created by PyTorch.

Unlike PyTorch networks that can be constructed to be completely input dimension independent, MAX78000/MAX78002 networks always require knowledge of the input dimensions, which are set by the sample input. The sample input defaults to tests/sample_dataset.npy (where dataset is replaced with the dataset used, e.g., mnist). The command line option --sample-input can point the tool to a different input source.

The dimensions are also important when flattening, since every pixel results in a channel, impacting the processor setup. The following is an example error message of a network that attempts to flatten a layer. The network was trained with 128×128, but the actual sample input provided was 64×64:

ERROR: Layer 6: 64 input channels (before flattening) using 1 pass, and 1 operand (64 processors per pass), but the enabled processor map 0x000000000000ffff has 16 bits instead of the expected number of 64.

In this example, each dimension was half the expected size, so the expected processor count was off by a factor of 4. To resolve the error, a properly dimensioned sample input had to be provided.

“new-lines” Configuration File Parsing Error

ERROR: invalid config: option "type" of "new-lines" should be in ('unix', 'dos')

This message indicates that an outdated version of yamllint is installed in the search path. Either update yamllint to version 1.27.0 or later, or uninstall yamllint, or edit .yamllint to remove new-lines: type: platform, or use --yamllint none.

Energy Measurement

The MAX78000 Evaluation Kit (EVKit) revision C and later, and the MAX78002 Evaluation Kit both include a MAX32625 microcontroller connected to a MAX34417 power accumulator. Since the sample rate of the MAX34417 is slow compared to typical inference times, ai8xize.py supports the command line parameter --energy that will run 100 iterations of the inference, separating out the input data load time. This allows enough sample time to get meaningful results (recommended minimum: 1 second).

When running C code generated with --energy, the power display on the EVKit will display the inference energy.

Note: MAX78000 uses LED1 and LED2 to trigger power measurement via MAX32625 and MAX34417.

See the benchmarking guide for more information about benchmarking.

Moving from MAX78000 to MAX78002 (or vice versa)

Assuming the network is compatible with the new deployment target, changing the --device parameter will create new code that differs as follows:

File	Changes	Recommended Action
cnn.c	Modified register and memory addresses, modified clock configuration	Replace file
main.c	Modified input memory addresses, modified clock configuration	Replace file or edit
Makefile	Modified TARGET variables	Replace file or edit
.launch	Modified values for `.cfg` and `.svd`	Replace file or edit
sampleoutput.h	Modified memory addresses	Replace file
weights.h	Modified memory addresses	Replace file
.settings/	Modified TARGET value	Replace folder or edit .prefs
.vscode/	Modified target variable	Replace folder or edit .json

Further Information

Additional information about the evaluation kits, and the software development kit (MSDK) is available on the web at https://github.com/analogdevicesinc/MaximAI_Documentation.

AHB Addresses for MAX78000 and MAX78002

Facial Recognition System

Contributing Code

Linting

Both projects are set up for flake8, pylint and isort to lint Python code. The line width is related to 100 (instead of the default of 80), and the number of lines per module was increased; configuration files are included in the projects. Shell code is linted by shellcheck, and YAML files by yamllint. Code should not generate any warnings in any of the tools (some of the components in the ai8x-training project will create warnings as they are based on third-party code).

flake8 and pylint need to be installed into both virtual environments:

(ai8x-synthesis) $ pip3 install flake8 pylint mypy isort

The GitHub projects use the GitHub Super-Linter to automatically verify push operations and pull requests. The Super-Linter can be installed locally using podman (or Docker), see installation instructions. To run locally, create a clean copy of the repository and run the following command from the project directory (i.e., ai8x-training or ai8x-synthesis):

$ podman run --rm -e RUN_LOCAL=true -e VALIDATE_MARKDOWN=false -e VALIDATE_PYTHON_BLACK=false -e VALIDATE_ANSIBLE=false -e VALIDATE_EDITORCONFIG=false -e VALIDATE_JSCPD=false -e VALIDATE_CPP=false -e VALIDATE_ANSIBLE=false -e VALIDATE_NATURAL_LANGUAGE=false -e VALIDATE_CLANG_FORMAT=false -e VALIDATE_GITHUB_ACTIONS=false -e FILTER_REGEX_EXCLUDE="attic/.*|inspect_ckpt.py" -v `pwd`:/tmp/lint ghcr.io/github/super-linter:v4

Submitting Changes

Do not try to push any changes into the main branch. Instead, create a fork and submit a pull request against the develop branch. The easiest way to do this is using a graphical client such as Fork or GitHub Desktop.

Note: After creating the fork, you must re-enable actions in the “Actions” tab of the repository on GitHub.

The following document has more information: https://github.com/analogdevicesinc/MaximAI_Documentation/blob/main/CONTRIBUTING.md

Name		Name	Last commit message	Last commit date
Latest commit History 293 Commits
.github		.github
assets		assets
attic		attic
docs		docs
izer		izer
networks		networks
notebooks		notebooks
openocd		openocd
scripts		scripts
super-linter.report		super-linter.report
tests		tests
trained		trained
utils		utils
.flake8		.flake8
.gitignore		.gitignore
.isort.cfg		.isort.cfg
.markdownlint.yaml		.markdownlint.yaml
.pylintrc		.pylintrc
.python-version		.python-version
.shellcheckrc		.shellcheckrc
.yamllint		.yamllint
LICENSE.txt		LICENSE.txt
NOTICE.txt		NOTICE.txt
README.md		README.md
README.pdf		README.pdf
ai8x-synthesis.code-workspace		ai8x-synthesis.code-workspace
ai8xize.py		ai8xize.py
gen-demos-max78000.sh		gen-demos-max78000.sh
gen-demos-max78002.sh		gen-demos-max78002.sh
izer.py		izer.py
mypy.ini		mypy.ini
pyproject.toml		pyproject.toml
pytest.ini		pytest.ini
quantize.py		quantize.py
requirements.txt		requirements.txt

License

EyubogluMerve/ai8x-synthesis

Folders and files

Latest commit

History

Repository files navigation

ADI MAX78000/MAX78002 Model Training and Synthesis

Part Numbers

Overview

Installation

File System Layout

Prerequisites

Platform Recommendation and Full Support

Operating System Support

Linux

Windows

macOS

Virtual Machines (Unsupported)

Docker Containers (Unsupported)

PyTorch and Python

Hardware Acceleration

Using Multiple GPUs

Shared (Multi-User) and Remote Systems

Additional Software

Project Installation

Free Disk Space

System Packages

macOS

Linux (Ubuntu), including WSL2

RedHat Enterprise Linux / CentOS 8

Python 3.8

pyenv

git Environment

Nervana Distiller

Upstream Code

Creating the Virtual Environment

Repository Branches

TensorFlow / Keras

Updating to the Latest Version

MSDK Updates

Python Version Updates

Synthesis Project

Repository Branches and Updates

Installation is now Complete

Embedded Software Development Kit (MSDK)

Method 1: MSDK Installer

Method 2: Manual Installation

Final Check

MAX78000 and MAX78002 Hardware and Resources

Overview

Data, Weights, and Processors

Weight Memory

Data Memory

Multi-Pass

Streaming Mode

FIFOs

Standard FIFOs

Fast FIFO

Number Format

Rounding

Addition

Saturation and Clipping

Multiplication

Sign Bit

Channel Data Formats

HWC (Height-Width-Channels)

CHW (Channels-Height-Width)

Considerations for Choosing an Input Format

CHW Input Data Format and Consequences for Weight Memory Layout

Active Processors and Layers

Layers and Weight Memory

Bias Memories

Weight Storage Example

Example: Conv2d

Activation Functions

None

ReLU

Abs

Limitations of MAX78000 Networks

Limitations of MAX78002 Networks

Example: `Conv2d`

`models` Data Structure

`datasets` Data Structure

`name`

`input`

`output`

`loader`

`weight` (optional)

`regression` (optional)

`visualize` (optional)