Added Donations and cleaned up Repo

DraftShift · Apr 29, 2024 · 2bfdcbb · 2bfdcbb
1 parent 6b6d785
commit 2bfdcbb
Show file tree

Hide file tree

Showing 22 changed files with 162,195 additions and 81,095 deletions.
diff --git a/CAD/StealthChanger_BlackBird.step → CAD/Backplates/StealthChanger_BlackBird.step b/CAD/StealthChanger_BlackBird.step → CAD/Backplates/StealthChanger_BlackBird.step
diff --git a/CAD/StealthChanger_Dragonburner.step → ...ckplates/StealthChanger_Dragonburner.step b/CAD/StealthChanger_Dragonburner.step → ...ckplates/StealthChanger_Dragonburner.step
diff --git a/CAD/StealthChanger_Rapidburner.step → ...ackplates/StealthChanger_Rapidburner.step b/CAD/StealthChanger_Rapidburner.step → ...ackplates/StealthChanger_Rapidburner.step
diff --git a/CAD/StealthChanger_Stealthburner.step → ...kplates/StealthChanger_Stealthburner.step b/CAD/StealthChanger_Stealthburner.step → ...kplates/StealthChanger_Stealthburner.step
diff --git a/.../HellSpark/BeltHelper/Belt helper v7.step → CAD/Extras/Belt helper v7.step b/.../HellSpark/BeltHelper/Belt helper v7.step → CAD/Extras/Belt helper v7.step
diff --git a/CAD/StealthChanger_Shuttle.step → ...huttle/StealthChanger_MGN12H_Shuttle.step b/CAD/StealthChanger_Shuttle.step → ...huttle/StealthChanger_MGN12H_Shuttle.step
diff --git a/STLs/MGN9H/StealthChanger MGN9H.step → ...Shuttle/StealthChanger_MGN9H_Shuttle.step b/STLs/MGN9H/StealthChanger MGN9H.step → ...Shuttle/StealthChanger_MGN9H_Shuttle.step
diff --git a/README.md b/README.md
@@ -27,7 +27,7 @@ Please use our [wiki](../../wiki) for more information and documentation.
 - [Slicers](../../wiki/Slicers)
 - [Serials](../../wiki/Serials)
 - [Support and FAQs](../../wiki/Support-and-FAQs)
-- [Contributing](../../wiki/Contributing)
+- [Contributing and Donating](../../wiki/Contributing-and-Donating)
 - [Team & Credits](../../wiki/Team-and-Credits)
 
 

diff --git a/STLs/Extras/BeltHelper/Belt helper v7.step b/STLs/Extras/BeltHelper/Belt helper v7.step
diff --git a/UserMods/HellSpark/BeltHelper/Left Block.stl → STLs/Extras/BeltHelper/Left Block.stl b/UserMods/HellSpark/BeltHelper/Left Block.stl → STLs/Extras/BeltHelper/Left Block.stl
diff --git a/UserMods/HellSpark/BeltHelper/Left Clip.stl → STLs/Extras/BeltHelper/Left Clip.stl b/UserMods/HellSpark/BeltHelper/Left Clip.stl → STLs/Extras/BeltHelper/Left Clip.stl
diff --git a/UserMods/HellSpark/BeltHelper/README.md → STLs/Extras/BeltHelper/README.md b/UserMods/HellSpark/BeltHelper/README.md → STLs/Extras/BeltHelper/README.md
diff --git a/...Mods/HellSpark/BeltHelper/Right Block.stl → STLs/Extras/BeltHelper/Right Block.stl b/...Mods/HellSpark/BeltHelper/Right Block.stl → STLs/Extras/BeltHelper/Right Block.stl
diff --git a/UserMods/HellSpark/BeltHelper/Right Clip.stl → STLs/Extras/BeltHelper/Right Clip.stl b/UserMods/HellSpark/BeltHelper/Right Clip.stl → STLs/Extras/BeltHelper/Right Clip.stl
diff --git a/STLs/Extras/Shuttle_Keeper_6mm.stl → STLs/Extras/Shuttle_Keeper_6mm_MGN12H.stl b/STLs/Extras/Shuttle_Keeper_6mm.stl → STLs/Extras/Shuttle_Keeper_6mm_MGN12H.stl
diff --git a/STLs/MGN9H/Keeper MGN9H.stl → STLs/Extras/Shuttle_Keeper_6mm_MGN9H.stl b/STLs/MGN9H/Keeper MGN9H.stl → STLs/Extras/Shuttle_Keeper_6mm_MGN9H.stl
diff --git a/STLs/Extras/Shuttle_Keeper_9mm.stl → STLs/Extras/Shuttle_Keeper_9mm_MGN12H.stl b/STLs/Extras/Shuttle_Keeper_9mm.stl → STLs/Extras/Shuttle_Keeper_9mm_MGN12H.stl
diff --git a/STLs/MGN9H/README.md b/STLs/MGN9H/README.md
diff --git a/STLs/MGN9H/Shuttle - MGN9H.stl → STLs/Shuttle _MGN9H.stl b/STLs/MGN9H/Shuttle - MGN9H.stl → STLs/Shuttle _MGN9H.stl
diff --git a/STLs/Shuttle.stl → STLs/Shuttle_MGN12H.stl b/STLs/Shuttle.stl → STLs/Shuttle_MGN12H.stl
diff --git a/wiki/Bill-of-Materials.md b/wiki/Bill-of-Materials.md
@@ -19,34 +19,42 @@ All parts (screws, magnets, etc) are Voron, and Voron Tap standards.
 
 x1 per toolhead
 
-### Stealthburner
+### All toolheads (per tool)
 
 **Note: heatsets on the SB version in from the opposite side as the Voron instructions, slightly longer screws on the CW2 attachment may be required**
 
 - [4] m3 heat inserts
 - [3] Ø4x12mm ssRod (dowel pin) with a rounded end **(if it has female threads on the back it will be listed as an M3, but make sure the pin is 4mm OD, that is what is important)**
-- [1] 6x3mm magnets (N52 Highly recommended to counter the pull from the umbilicals)
+- [1] 6x3mm magnet (N52 Highly recommended to counter the pull from the umbilicals)
 - [2] m3x6 or m3x8 FHCS (Flat head countersunk screw, MUST BE MAGNETIC. no stainless, as per TAP)
+- [1] [OptiTap sensor](https://s.click.aliexpress.com/e/_DEGsGTV) (only the PCB is required)
 
-### Dragonburner
+### Additional Tool Specific BOM
+
+### Dragonburner/Rapidburner
 
 - [1] m3x12 BHCS (optional to keep spacer in place)
 - [2] m3x35 SHCS
 - [2] m3 heat inserts
-** Note: Dragonburner extended mount is require depending on extruder**
+** Note: Dragonburner extended mount is required depending on extruder**
+
+### Archetype Blackbird
+
+- [1] m3x12 BHCS (to hold the sherpa mount in place)
+- [2] m3 heat inserts
 
 ## Endstops
 
 Optional
 
 - [1] m3x6 BHCS
-- [1] m3 heat inserts
+- [1] m3 heat insert
 - [1] 6x3mm magnet (Hall Effect Sensor ONLY, Voron spec)
 
 
 ## Options
 
-You will likely need help with belts, make sure to decide on if you will use the [shuttle keeper](https://github.com/DraftShift/Stealthchanger/tree/main/STLs/Extras) or use the [belt helper](https://github.com/DraftShift/Stealthchanger/tree/main/UserMods/HellSpark/BeltHelper).  And print the required parts and make sure to have the addition bill of materials for them.
+You will likely need help with belts, make sure to decide on if you will use the [shuttle keeper](https://github.com/DraftShift/Stealthchanger/tree/main/STLs/Extras) or use the [belt helper](https://github.com/DraftShift/Stealthchanger/tree/main/STLs/Extras/BeltHelper).  And print the required parts and make sure to have the addition bill of materials for them.
 
 
 ## Affiliate Links

diff --git a/wiki/Contributing.md → wiki/Contributing-and-Donating.md b/wiki/Contributing.md → wiki/Contributing-and-Donating.md
@@ -24,3 +24,11 @@ Follow [Creating a pull request](https://docs.github.com/en/pull-requests/collab
 
 
 **Not following any of these guide lines will result in the pull request being denied**
+
+## Support via Donation
+
+StealthChanger and all other designs by DraftShift design are fully open source and come at no cost to the user.
+
+If you feel that you would like to contribute by donating, please use either the Paypal or Ko-Fi links below
+
+[![paypal](https://www.paypalobjects.com/en_US/i/btn/btn_donateCC_LG.gif)](https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=QB27XC84YZPA4)  [![ko-fi](https://ko-fi.com/img/githubbutton_sm.svg)](https://ko-fi.com/L3L0XA8TK)