Merge pull request #3280 from Aircoookie/alt-buffer

Bus-level global buffering

platformio.ini

@@ -11,7 +11,7 @@
 
 # CI binaries
 ; default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, esp32dev, esp32_eth # ESP32 variant builds are temporarily excluded from CI due to toolchain issues on the GitHub Actions Linux environment
-default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, esp32dev, esp32_eth, lolin_s2_mini, esp32c3dev, esp32s3dev_8MB
+default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, esp32dev, esp32_eth, lolin_s2_mini, esp32c3dev, esp32s3dev_8MB, esp32s3dev_8MB_PSRAM_opi
 
 # Release binaries
 ; default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, esp32dev, esp32_eth, lolin_s2_mini, esp32c3dev, esp32s3dev_8MB
@@ -175,7 +175,7 @@ upload_speed = 115200
 # ------------------------------------------------------------------------------
 lib_compat_mode = strict
 lib_deps =
-    fastled/FastLED @ 3.5.0
+    fastled/FastLED @ 3.6.0
     IRremoteESP8266 @ 2.8.2
     makuna/NeoPixelBus @ 2.7.5
     https://github.com/Aircoookie/ESPAsyncWebServer.git @ ~2.0.7
@@ -201,7 +201,7 @@ build_flags =
   -DESP8266
   -DFP_IN_IROM
   ;-Wno-deprecated-declarations
-  -Wno-register  ;; leaves some warnings when compiling C files: command-line option '-Wno-register' is valid for C++/ObjC++ but not for C
+  ;-Wno-register  ;; leaves some warnings when compiling C files: command-line option '-Wno-register' is valid for C++/ObjC++ but not for C
   ;-Dregister= # remove warnings in C++17 due to use of deprecated register keyword by the FastLED library ;; warning: this can be dangerous
   -Wno-misleading-indentation
   ; NONOSDK22x_190703 = 2.2.2-dev(38a443e)
@@ -249,9 +249,8 @@ lib_deps =
 ;;
 ;; please note that you can NOT update existing ESP32 installs with a "V4" build. Also updating by OTA will not work properly.
 ;; You need to completely erase your device (esptool erase_flash) first, then install the "V4" build from VSCode+platformio.
-platform = espressif32@5.2.0
+platform = espressif32@5.3.0
 platform_packages =
-  toolchain-riscv32-esp @ 8.4.0+2021r2-patch5 ; required for platform version < 5.3.0, remove this line when upgrading to platform >=5.3.0
 build_flags = -g
   -Wshadow=compatible-local ;; emit warning in case a local variable "shadows" another local one
   -DARDUINO_ARCH_ESP32 -DESP32
@@ -265,9 +264,8 @@ lib_deps =
 
 [esp32s2]
 ;; generic definitions for all ESP32-S2 boards
-platform = espressif32@5.2.0
+platform = espressif32@5.3.0
 platform_packages =
-  toolchain-riscv32-esp @ 8.4.0+2021r2-patch5 ; required for platform version < 5.3.0, remove this line when upgrading to platform >=5.3.0
 build_flags = -g
   -DARDUINO_ARCH_ESP32
   -DARDUINO_ARCH_ESP32S2
@@ -285,9 +283,8 @@ lib_deps =
 
 [esp32c3]
 ;; generic definitions for all ESP32-C3 boards
-platform = espressif32@5.2.0
+platform = espressif32@5.3.0
 platform_packages =
-  toolchain-riscv32-esp @ 8.4.0+2021r2-patch5 ; required for platform version < 5.3.0, remove this line when upgrading to platform >=5.3.0
 build_flags = -g
   -DARDUINO_ARCH_ESP32
   -DARDUINO_ARCH_ESP32C3
@@ -304,9 +301,8 @@ lib_deps =
 
 [esp32s3]
 ;; generic definitions for all ESP32-S3 boards
-platform = espressif32@5.2.0
+platform = espressif32@5.3.0
 platform_packages =
-  toolchain-riscv32-esp @ 8.4.0+2021r2-patch5 ; required for platform version < 5.3.0, remove this line when upgrading to platform >=5.3.0
 build_flags = -g
   -DESP32
   -DARDUINO_ARCH_ESP32
@@ -450,6 +446,7 @@ board_build.flash_mode = qio
 upload_speed = 460800
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32s2.build_flags} #-D WLED_RELEASE_NAME=S2_saola
+  ;-DLOLIN_WIFI_FIX ;; try this in case Wifi does not work
   -DARDUINO_USB_CDC_ON_BOOT=1
 lib_deps = ${esp32s2.lib_deps}
 
@@ -462,6 +459,7 @@ board = esp32-c3-devkitm-1
 board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
 build_flags = ${common.build_flags} ${esp32c3.build_flags} #-D WLED_RELEASE_NAME=ESP32-C3
   -D WLED_WATCHDOG_TIMEOUT=0
+  -DLOLIN_WIFI_FIX ; seems to work much better with this
   -DARDUINO_USB_CDC_ON_BOOT=1 ;; for virtual CDC USB
   ;-DARDUINO_USB_CDC_ON_BOOT=0   ;; for serial-to-USB chip
 upload_speed = 460800
@@ -478,7 +476,7 @@ build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32s3.build_flags}
   -D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0
   -D ARDUINO_USB_CDC_ON_BOOT=0  ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
-  ;-D ARDUINO_USB_CDC_ON_BOOT=1 ;; -D ARDUINO_USB_MODE=0 ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
+  ;-D ARDUINO_USB_CDC_ON_BOOT=1 ;; -D ARDUINO_USB_MODE=1 ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
   ;-D WLED_DEBUG
 lib_deps = ${esp32s3.lib_deps}
 board_build.partitions = tools/WLED_ESP32_8MB.csv
@@ -487,19 +485,18 @@ board_build.flash_mode = qio
 ; board_build.flash_mode = dio   ;; try this if you have problems at startup
 monitor_filters = esp32_exception_decoder
 
-[env:esp32s3dev_8MB_PSRAM]
-;; ESP32-TinyS3 development board, with 8MB FLASH and 8MB PSRAM (memory_type: qio_opi, qio_qspi, or opi_opi)
-;board = um_tinys3 ;    -> needs workaround from https://github.com/Aircoookie/WLED/pull/2905#issuecomment-1328049860
-;board = esp32s3box   ; -> error: 'esp32_adc2gpio' was not declared in this scope
-board = esp32-s3-devkitc-1 ; -> compiles, but does not support PSRAM
+[env:esp32s3dev_8MB_PSRAM_opi]
+;; ESP32-S3 development board, with 8MB FLASH and >= 8MB PSRAM (memory_type: qio_opi)
+board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
+board_build.arduino.memory_type = qio_opi     ;; use with PSRAM: 8MB or 16MB
 platform = ${esp32s3.platform}
 platform_packages = ${esp32s3.platform_packages}
 upload_speed = 921600
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32s3.build_flags}
   -D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0
-  ;-D ARDUINO_USB_CDC_ON_BOOT=0 ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
-  -D ARDUINO_USB_CDC_ON_BOOT=1  ;; -D ARDUINO_USB_MODE=0 ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
+  ;-D ARDUINO_USB_CDC_ON_BOOT=0  ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
+  -D ARDUINO_USB_CDC_ON_BOOT=1 -D ARDUINO_USB_MODE=1      ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
   ; -D WLED_RELEASE_NAME=ESP32-S3_PSRAM
   -D WLED_USE_PSRAM -DBOARD_HAS_PSRAM ; tells WLED that PSRAM shall be used
 lib_deps = ${esp32s3.lib_deps}
@@ -508,6 +505,13 @@ board_build.f_flash = 80000000L
 board_build.flash_mode = qio
 monitor_filters = esp32_exception_decoder
 
+[env:esp32s3dev_8MB_PSRAM_qspi]
+;; ESP32-TinyS3 development board, with 8MB FLASH and PSRAM (memory_type: qio_qspi)
+extends = env:esp32s3dev_8MB_PSRAM_opi
+;board = um_tinys3 ;    -> needs workaround from https://github.com/Aircoookie/WLED/pull/2905#issuecomment-1328049860
+board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
+board_build.arduino.memory_type = qio_qspi ;; use with PSRAM: 2MB or  4MB
+
 [env:esp8285_4CH_MagicHome]
 board = esp8285
 platform = ${common.platform_wled_default}

tools/WLED_ESP32_16MB_9MB_FS.csv

@@ -0,0 +1,8 @@
+# Name,   Type, SubType, Offset,  Size, Flags
+nvs,      data, nvs,     0x9000,  0x5000,
+otadata,  data, ota,     0xe000,  0x2000,
+app0,     app,  ota_0,   0x10000, 0x300000,
+app1,     app,  ota_1,   0x310000,0x300000,
+spiffs,   data, spiffs,  0x610000,0x9E0000,
+coredump, data, coredump,,64K
+# to create/use ffat, see https://github.com/marcmerlin/esp32_fatfsimage

tools/WLED_ESP32_8MB.csv

@@ -3,4 +3,5 @@ nvs,      data, nvs,     0x9000,  0x5000,
 otadata,  data, ota,     0xe000,  0x2000,
 app0,     app,  ota_0,   0x10000, 0x200000,
 app1,     app,  ota_1,   0x210000,0x200000,
-spiffs,   data, spiffs,  0x410000,0x3F0000,
+spiffs,   data, spiffs,  0x410000,0x3E0000,
+coredump, data, coredump,,64K