Please provide a how to...

[InFlames82]

Hello,
I'm also want to conrol my Wamera EWFS blinds with ESP-Home to use it in Home Assistant.
Can you please provite a discription how do you solve this?
Many thanks,
Marius

[tombrain]

Hi,
first of allm you have to get codes by https://github.com/tombrain/aircontrol/tree/localwaremacodes

Hardware I used: raspberryPI and https://eckstein-shop.de/433-Mhz-Funk-Modul-RF-Empfaenger-Sender-fuer-Arduino-Raspberry-Pi

Scanned codes you can use by esphome_waremacontrol

[InFlames82]

Thank you- can you also provide a Description how to wire the Pi and the Sender Empfänger?

Danke

[tombrain]

Thank you- can you also provide a Description how to wire the Pi and the Sender Empfänger?

Danke
Perhaps this help. It is only a foreign example
https://mary.codes/blog/home_automation/quick_and_dirty_fan_hacking_with_raspberry_pi/

[iflowmac]

Hi tombrain,
I got everything up and running, but I have a problem: I only hear one click from the shutter motor every time I press a button in HA, but they are not moving up or down. with aircontrol on a raspi everything works fine ( I got my codes from there). Is it possible, that the numbers of codes sent are too low? Where can I change that in your codes? In the component.h ? Can you please help me? (I have external blinds, Raffstore in German)

[tombrain]

hi, here:

i've changed it to 10

[iflowmac]

what do I have to restart to make the change happen? i changed it to different higher values, but nothing happens ...

[tombrain]

Not restart. Re-compile by install.