diff --git a/en/sitemap.xml b/en/sitemap.xml index ece7b94..43e83e8 100644 --- a/en/sitemap.xml +++ b/en/sitemap.xml @@ -1 +1 @@ -https://tetrabiodistributed.github.io/papra/past-builds/jan-9-2021/building-tetra-papr-fan-box-v1/2021-04-27T21:03:23-07:00https://tetrabiodistributed.github.io/papra/past-builds/jan-9-2021/building-tetra-papr-m12-v1/2021-04-27T21:03:23-07:00https://tetrabiodistributed.github.io/papra/past-builds/jan-9-2021/building-tetra-papr-m12-v2/2021-04-27T21:03:23-07:00https://tetrabiodistributed.github.io/papra/past-builds/jan-9-2021/building-tetra-papr-mask-v1/2021-04-27T21:03:23-07:00https://tetrabiodistributed.github.io/papra/past-builds/aug-2021/2022-10-22T11:22:35-07:00https://tetrabiodistributed.github.io/papra/past-builds/jun-2022/2024-04-06T06:13:14-07:00https://tetrabiodistributed.github.io/papra/past-builds/mar-2021/2021-09-05T10:21:53-07:00https://tetrabiodistributed.github.io/papra/v1.1/2024-04-06T09:07:06-07:00https://tetrabiodistributed.github.io/papra/past-builds/jan-31-2021/2021-04-27T20:05:36-07:00https://tetrabiodistributed.github.io/papra/past-builds/jan-9-2021/2021-04-27T21:03:23-07:00https://tetrabiodistributed.github.io/papra/past-builds/nov-2020/2021-04-27T21:13:56-07:00https://tetrabiodistributed.github.io/papra/past-builds/aug-2021/fan-box/2022-10-11T17:07:51-07:00https://tetrabiodistributed.github.io/papra/past-builds/jun-2022/fan-box/2024-04-05T21:43:23+05:30https://tetrabiodistributed.github.io/papra/past-builds/mar-2021/fan-box/2021-09-05T10:21:53-07:00https://tetrabiodistributed.github.io/papra/v1.1/fan-box/2024-04-06T09:07:06-07:00https://tetrabiodistributed.github.io/papra/past-builds/jan-31-2021/fan-box-v3/2021-04-27T20:05:36-07:00https://tetrabiodistributed.github.io/papra/past-builds/mar-2021/fan-box-circuits/2021-09-05T10:21:53-07:00https://tetrabiodistributed.github.io/papra/past-testing-guide/flow_testing_aug_2021/2022-11-03T10:12:10-07:00https://tetrabiodistributed.github.io/papra/past-testing-guide/flow_testing_may_2021/2022-11-03T10:12:10-07:00https://tetrabiodistributed.github.io/papra/past-builds/aug-2021/m12/2022-10-11T17:07:51-07:00https://tetrabiodistributed.github.io/papra/past-builds/jun-2022/m12/2024-04-05T21:43:23+05:30https://tetrabiodistributed.github.io/papra/v1.1/m12-controller/2024-04-06T07:50:42-07:00https://tetrabiodistributed.github.io/papra/past-builds/mar-2021/m12/2021-09-06T08:23:48-07:00https://tetrabiodistributed.github.io/papra/past-builds/aug-2021/m12-v1/2022-10-11T17:07:51-07:00https://tetrabiodistributed.github.io/papra/past-builds/jan-31-2021/m12-v1/2021-04-27T20:05:36-07:00https://tetrabiodistributed.github.io/papra/past-builds/jun-2022/m12-v1/2024-04-05T21:43:23+05:30https://tetrabiodistributed.github.io/papra/past-builds/jan-31-2021/m12-v3/2021-04-27T20:05:36-07:00https://tetrabiodistributed.github.io/papra/past-builds/jun-2022/m12-circuit/2024-04-05T21:43:23+05:30https://tetrabiodistributed.github.io/papra/past-builds/aug-2021/mask-v4/2022-10-11T17:07:51-07:00https://tetrabiodistributed.github.io/papra/past-builds/jun-2022/mask-3m/2024-04-05T21:43:23+05:30https://tetrabiodistributed.github.io/papra/past-builds/mar-2021/mask/2021-09-05T10:21:53-07:00https://tetrabiodistributed.github.io/papra/v1.1/mask-3m/2024-04-06T06:07:51-07:00https://tetrabiodistributed.github.io/papra/past-builds/jan-31-2021/mask-v3/2021-04-27T20:05:36-07:00https://tetrabiodistributed.github.io/papra/past-builds/mar-2021/mask-v3/2021-09-05T10:21:53-07:00https://tetrabiodistributed.github.io/papra/past-builds/aug-2021/molle/2022-10-11T17:07:51-07:00https://tetrabiodistributed.github.io/papra/testing-guide/n100_testing_march_2024/2024-04-06T06:04:48-07:00https://tetrabiodistributed.github.io/papra/testing-guide/n95_testing_march_2021/2022-11-03T10:08:39-07:00https://tetrabiodistributed.github.io/papra/past-builds/aug-2021/straps/2022-10-11T17:07:51-07:00https://tetrabiodistributed.github.io/papra/past-builds/jan-31-2021/straps-v1/2021-04-27T20:05:36-07:00https://tetrabiodistributed.github.io/papra/2024-04-05T15:12:58-07:00https://tetrabiodistributed.github.io/papra/testing-guide/pressure_testing_oct_2022/2022-11-03T10:08:39-07:00https://tetrabiodistributed.github.io/papra/v1.1/papra-pcba/2024-04-06T08:50:01-07:00https://tetrabiodistributed.github.io/papra/testing-guide/2022-11-03T10:08:39-07:00https://tetrabiodistributed.github.io/papra/past-builds/2021-04-27T20:05:02-07:00https://tetrabiodistributed.github.io/papra/past-testing-guide/2022-11-03T10:12:10-07:00https://tetrabiodistributed.github.io/papra/past-builds/jan-9-2021/building-tetra-papr-straps-v1/2021-04-27T21:03:23-07:00 \ No newline at end of file +https://tetrabiodistributed.github.io/papra/past-builds/jan-9-2021/building-tetra-papr-fan-box-v1/2021-04-27T21:03:23-07:00https://tetrabiodistributed.github.io/papra/past-builds/jan-9-2021/building-tetra-papr-m12-v1/2021-04-27T21:03:23-07:00https://tetrabiodistributed.github.io/papra/past-builds/jan-9-2021/building-tetra-papr-m12-v2/2021-04-27T21:03:23-07:00https://tetrabiodistributed.github.io/papra/past-builds/jan-9-2021/building-tetra-papr-mask-v1/2021-04-27T21:03:23-07:00https://tetrabiodistributed.github.io/papra/past-builds/aug-2021/2022-10-22T11:22:35-07:00https://tetrabiodistributed.github.io/papra/past-builds/jun-2022/2024-04-06T06:13:14-07:00https://tetrabiodistributed.github.io/papra/past-builds/mar-2021/2021-09-05T10:21:53-07:00https://tetrabiodistributed.github.io/papra/v1.1/2024-07-19T08:16:02+05:30https://tetrabiodistributed.github.io/papra/past-builds/jan-31-2021/2021-04-27T20:05:36-07:00https://tetrabiodistributed.github.io/papra/past-builds/jan-9-2021/2021-04-27T21:03:23-07:00https://tetrabiodistributed.github.io/papra/past-builds/nov-2020/2021-04-27T21:13:56-07:00https://tetrabiodistributed.github.io/papra/past-builds/aug-2021/fan-box/2022-10-11T17:07:51-07:00https://tetrabiodistributed.github.io/papra/past-builds/jun-2022/fan-box/2024-04-05T21:43:23+05:30https://tetrabiodistributed.github.io/papra/past-builds/mar-2021/fan-box/2021-09-05T10:21:53-07:00https://tetrabiodistributed.github.io/papra/v1.1/fan-box/2024-07-19T08:16:02+05:30https://tetrabiodistributed.github.io/papra/past-builds/jan-31-2021/fan-box-v3/2021-04-27T20:05:36-07:00https://tetrabiodistributed.github.io/papra/past-builds/mar-2021/fan-box-circuits/2021-09-05T10:21:53-07:00https://tetrabiodistributed.github.io/papra/past-testing-guide/flow_testing_aug_2021/2022-11-03T10:12:10-07:00https://tetrabiodistributed.github.io/papra/past-testing-guide/flow_testing_may_2021/2022-11-03T10:12:10-07:00https://tetrabiodistributed.github.io/papra/past-builds/aug-2021/m12/2022-10-11T17:07:51-07:00https://tetrabiodistributed.github.io/papra/past-builds/jun-2022/m12/2024-04-05T21:43:23+05:30https://tetrabiodistributed.github.io/papra/v1.1/m12-controller/2024-04-16T07:49:30+05:30https://tetrabiodistributed.github.io/papra/past-builds/mar-2021/m12/2021-09-06T08:23:48-07:00https://tetrabiodistributed.github.io/papra/past-builds/aug-2021/m12-v1/2022-10-11T17:07:51-07:00https://tetrabiodistributed.github.io/papra/past-builds/jan-31-2021/m12-v1/2021-04-27T20:05:36-07:00https://tetrabiodistributed.github.io/papra/past-builds/jun-2022/m12-v1/2024-04-05T21:43:23+05:30https://tetrabiodistributed.github.io/papra/past-builds/jan-31-2021/m12-v3/2021-04-27T20:05:36-07:00https://tetrabiodistributed.github.io/papra/past-builds/jun-2022/m12-circuit/2024-04-05T21:43:23+05:30https://tetrabiodistributed.github.io/papra/past-builds/aug-2021/mask-v4/2022-10-11T17:07:51-07:00https://tetrabiodistributed.github.io/papra/past-builds/jun-2022/mask-3m/2024-04-05T21:43:23+05:30https://tetrabiodistributed.github.io/papra/past-builds/mar-2021/mask/2021-09-05T10:21:53-07:00https://tetrabiodistributed.github.io/papra/v1.1/mask-3m/2024-07-19T08:16:02+05:30https://tetrabiodistributed.github.io/papra/past-builds/jan-31-2021/mask-v3/2021-04-27T20:05:36-07:00https://tetrabiodistributed.github.io/papra/past-builds/mar-2021/mask-v3/2021-09-05T10:21:53-07:00https://tetrabiodistributed.github.io/papra/past-builds/aug-2021/molle/2022-10-11T17:07:51-07:00https://tetrabiodistributed.github.io/papra/testing-guide/n100_testing_march_2024/2024-04-06T06:04:48-07:00https://tetrabiodistributed.github.io/papra/testing-guide/n95_testing_march_2021/2022-11-03T10:08:39-07:00https://tetrabiodistributed.github.io/papra/past-builds/aug-2021/straps/2022-10-11T17:07:51-07:00https://tetrabiodistributed.github.io/papra/past-builds/jan-31-2021/straps-v1/2021-04-27T20:05:36-07:00https://tetrabiodistributed.github.io/papra/2024-04-05T15:12:58-07:00https://tetrabiodistributed.github.io/papra/testing-guide/pressure_testing_oct_2022/2022-11-03T10:08:39-07:00https://tetrabiodistributed.github.io/papra/v1.1/papra-pcba/2024-07-19T08:19:03+05:30https://tetrabiodistributed.github.io/papra/testing-guide/2022-11-03T10:08:39-07:00https://tetrabiodistributed.github.io/papra/past-builds/2021-04-27T20:05:02-07:00https://tetrabiodistributed.github.io/papra/past-testing-guide/2022-11-03T10:12:10-07:00https://tetrabiodistributed.github.io/papra/past-builds/jan-9-2021/building-tetra-papr-straps-v1/2021-04-27T21:03:23-07:00 \ No newline at end of file diff --git a/sitemap.xml b/sitemap.xml index 57aea7c..e1d0e90 100644 --- a/sitemap.xml +++ b/sitemap.xml @@ -1 +1 @@ -https://tetrabiodistributed.github.io/papra/en/sitemap.xml2024-04-06T09:07:06-07:00https://tetrabiodistributed.github.io/papra/es/sitemap.xml \ No newline at end of file +https://tetrabiodistributed.github.io/papra/es/sitemap.xmlhttps://tetrabiodistributed.github.io/papra/en/sitemap.xml2024-07-19T08:19:03+05:30 \ No newline at end of file diff --git a/v1.1/fan-box/index.html b/v1.1/fan-box/index.html index ef2df5e..4ac6f75 100644 --- a/v1.1/fan-box/index.html +++ b/v1.1/fan-box/index.html @@ -1,4 +1,4 @@ -How to build a PAPRa Fan Box (96mm) | PAPRaHow to build a PAPRa Fan Box (96mm) | PAPRa
+How to build a PAPRa Fan Box (96mm) | PAPRaHow to build a PAPRa Fan Box (96mm) | PAPRa
Edit this page Create documentation issue -Create project issue

How to build a PAPRa Fan Box (96mm)

How-To guide for building the Tetra PAPRa fan box (96mm) (April 2024 build).

Quick Synopsis

The Tetra Powered Air Purified Respirator requires that the air be purified; this purification is accomplished by powering a fan to pull air through a filter and then pushing that purified air through a hose to a mask worn on the face. This section contains the instructions for building the box that holds the fan and filter.

The main goal of this iteration of the fan box is to reach N99 filtration levels by ensuring that the power connector is dustproof and using an IP68-rated BNC jack.

WARNING: we provide no warranty, implicit or explicit, that this device will work up to an N95 specification, when built outside of a facility rated to do so. The only way to truly test one of these devices using something like a Portacount under controlled conditions.

This particular version of the PAPRA has been tested to pass at an N99 level, and likely passes at an N100/P100 level, since the build uses P100 filters. We do not have the equipment necessary to validate that this device passes at a P100 level.

Parts Required

This photo shows all the parts laid out for building this component:

DSCF0197 X3

The assembly diagram is here.

3D Printed Parts

These parts should be printed at 0.2 or 0.15 spacing. They should be oriented such that the large plates are closest to the build plate:

Table 1. Table Printed Parts
PartPart NumberQuantityMaterialSupports required?STL File Location

The Fan Box (holds the fan)

P-TET-000140

1

PLA/PETG

No (Can have some in the nut pocket)

https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000140%20Base%20Sanyo.st

Filter Interface

P-TET-000158

1

PLA/PETG

No (Can have some in the nut pocket)

https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000158%20Stealth%20Filter%20Interface%20Sanyo.stl

Filter Frame

P-TET-000159

1

PLA/PETG

No

https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000159%20Stealth%20Filter%20Frame%20Sanyo.stl

Weather Guard

P-TET-000143

1

PLA/PETG

No

https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000159%20Stealth%20Filter%20Frame%20Sanyo.stl

Fan Outlet Spout

P-TET-000144

1

PLA/PETG

No

https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000144%20Spout.stl

Fan Outlet Spacer

P-TET-000145

1

PLA/PETG

No

https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000145%20Spacer.stl

Fan Outlet Interface

P-TET-000152

1

PLA/PETG

No

https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000152%20Spout%20Interface.stl

Spout ring

P-TET-000191

1

PLA/PETG

No

https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000191%20Spout%20Ring.stl

MOLLE Strap

P-TET-000153

1

PLA/PETG

No

https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000153%20MOLLE%20Strap.stl

MOLLE Catch

P-TET-000154

1

PLA/PETG

No

https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000154%20MOLLE%20Catch.stl

MOLLE Spacer

P-TET-000193

1

PLA/PETG

No

https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000193%20MOLLE%20Spacer.stl

Gaskets

Gaskets should be cut from 2mm craft foam. Ideally, they should be cut by something such as Cricut (https://www.cricut.com/), but can also be cut using scissors or an Xacto knife so long as the templates are followed closely. The Cricut uses the supplied SVG files, and other cutters can use the supplied DXFs.

Table 2. Table Gaskets

Part

Part Number

Quantity

Material

Pattern (SVG)

Base Gasket

P-TET-000146

1

Craft Foam

https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/Gaskets/96mm%20Stealth%20Sanyo%20PAPRa/P-TET-000146%2096mm%20Base%20Gasket.svg

Fan Gasket

P-TET-000147

1

Craft Foam

https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/Gaskets/96mm%20Stealth%20Sanyo%20PAPRa/P-TET-000147%2096mm%20Fan%20Gasket.svg

Filter Gasket

P-TET-000148

1

Craft Foam

https://github.com/tetrabiodistributed/papr-print-files/blob/db2500507c2c03987185a34bd57795aa45caed02/Gaskets/96mm%20Stealth%20Sanyo%20PAPRa/P-TET-000148%2096mm%20Filter%20Gasket.svg

Outlet Gasket

P-TET-000149

1

Craft Foam

https://github.com/tetrabiodistributed/papr-print-files/blob/db2500507c2c03987185a34bd57795aa45caed02/Gaskets/96mm%20Stealth%20Sanyo%20PAPRa/P-TET-000149%2096mm%20Outlet%20Gasket.svg

Fan Outlet Spout Interface

P-TET-000152

1

Craft Foam

https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/Gaskets/96mm%20Stealth%20Sanyo%20PAPRa/P-TET-000152%2096mm%20Fan%20Outlet%20Spout%20Interface.svg

Vendor Bill Of Materials

These are components that need to be purchased. Prices fluctuate, and so are not included here. Alternative versions can be sourced, and we welcome edits for tested alternatives.

Table 3. Table Vendor Bill Of Materials (BOM)

Count

Description

URL

Number in Package

1

Sanyo Denki 9BMB12F201

https://octopart.com/9bmb12f201-sanyo+denki-24320259

1

1

20 American Wire Gauge (awg) BNC cable

https://www.jameco.com/z/205-523-Steren-Electronics-Cable-Assembly-RG58-U-36-Bnc-To-Bnc-50-Ohm_11404.html

1

1

Dryer Vent Installation Tape

http://www.nashuatape.com/

1

1

BNC Cable Jack Connector

https://octopart.com/112517-amphenol+rf-50123148

1

13

M4 16mm screws

13

M4 square nuts

1

BNC 20 gauge wire stays

https://www.jameco.com/z/205-523-Steren-Electronics-Cable-Assembly-RG58-U-36-Bnc-To-Bnc-50-Ohm_11404.html

1

1

Stealth Filters

Stealth Filters

2

Recommended Tools

These tools are recommended. URLs are for tools purchased and used in the building of the prototypes:

Table 4. Table Tool List
DescriptionURL

4-3/4 In. Bent Long Nose Pliers

https://www.harborfreight.com/4-34-in-bent-long-nose-pliers-63819.html

A hex screwdriver for the m4 screws

https://www.amazon.com/gp/product/B007ICWAJC

Flush cutter

https://www.harborfreight.com/micro-flush-cutter-90708.html

X-acto knife

https://www.amazon.com/Xacto-X3201-N0-Precision-Knife/dp/B00004Z2TQ

3D Printer (note the size of the print bed for the fan box)

https://www.prusa3d.com/category/original-prusa-mk4/

#0 Phillips head screwdriver

https://www.homedepot.com/p/Husky-8-in-1-Screwdriver-with-LED-Light-232360016/301959976

CPAP hose cleaner (for maintenance)

https://www.amazon.com/Cleaning-DreamStation-Diameter-Stainless-Cleaner/dp/B08HLQV2VK/

Cable Crimper

https://www.amazon.com/IWISS-Crimping-Swaging-Aluminum-Sleeves/dp/B00JW4X4TO/ref=sr_1_20?dchild=1&keywords=cable+crimping+tool&qid=1630860032&sr=8-20

9/16 Nut Driver for the BNC

https://www.milwaukeetool.com/Products-Repository/North-America/Hand-Tools/Screwdrivers/48-22-2427

Build Steps

Preparing the parts

Cut out the Gaskets Carefully.

DSCF0198 M
DSCF0202 M

Cut the tape into small piece’s

DSCF0208 M
DSCF0211 M

BNC Connection

A video on how to build the BNC connector:

Strip the red wire on the fan:

DSC4240 L

Connect the smaller brass component to the red wire:

DSC4242 L

Crimp the brass component to the wire:

DSC4261 L

Test that the crimp went well by tugging on the brass component:

DSC4263 L

Make sure to put the wires through the ground cylinder before connecting the brass component to the connector:

DSC4248 L

Push the brass component into the center of the connector.

DSC4264 L

Since the wire is braided, this step can be tricky, and a small item like a paperclip can help push the component into the middle of the connector:

DSC4268 L

Check that the brass component is visible and flush with the interior plastic column in the connector:

DSC4270 L

Tugging on the wire should not have the component pull out:

DSC4266 L

Strip the black wire:

DSC4275 L

Crimp the ground cylinder to the back of the connector with the black wire:

DSC4277 L

Another angle of the crimp:

DSC4278 L

Place the waterproof seal around the edge of the BNC jack:

DSC4282 L

Build Fan Box Assembly

Place the Fan Outlet Spacer (P-TET-000145) into the fan:

DSCF0214 M

Place the Fan Outlet Spacer (P-TET-000152) into the fan:

DSCF0215 M

Note the orientation:

DSCF0216 M

Begin taping the Fan Outlets into the fan:

DSCF0217 M

Cover all of the air gaps with dryer tape:

DSCF0233 M
DSCF0234 M

Place the base gasket (P-TET-000146) carefullyinto the fan box (P-TET-000140):

DSCF0235 M
DSCF0239 M
DSCF0240 L

Place the Fan Outlet Gasket (P-TET-000) inside the Fan Outlet Spout raised edge (P-TET-000144):

DSCF0245 M

Place the fan outlet spout (with gasket) into the fan box:

DSCF0247 M

Place the BNC jack into the fan box:

DSCF0249 M
DSCF0251 L

Make sure the BNC jack is seated in the hexagonal space:

DSCF0252 M

Place the washer around the BNC jack:

DSCF0254 M
DSCF0255 L

Place and the finger tighten hex nut on top of the washer and BNC jack:

DSCF0256 L
DSCF0257 L

Tighten the hex nut with a wrench:

DSCF0259 M

Place the fan (with outlet spout) into the box, holding the gasket in place:

DSCF0265 M

Push the wires in to the fan box.

DSCF0275 M
DSCF0277 L

Place the Fan Gasket (P-TET-000147) on the Fan box.

DSCF0278 L
DSCF0279 M

Connect Filter Interface to Fan Box Assembly

Place the filter interface on top of the fan box:

DSCF0282 L
DSCF0281 L

DSCF0284 L

Place 4x M4x16mm screws through the filter interface:

DSCF0286 L
DSCF0290 L
DSCF0291 L

Secure the filter interface onto the fan box with 4x M4x16 screws using a hex screwdriver:

DSCF0294 L
DSCF0295 L

Option to use an impact drill:

DSCF0297 L

Load the Filters into the Filter Frame

Place the Filter Gasket (P-TET-000148) onto the Filter interface (P-TET-000158):

DSCF0306 L
DSCF0307 L

Place the stealth filters into the filter gasket:

DSCF0309 L
DSCF0312 L

Place an M4 square nut into the center space of the Filter Frame (P-TET-000159):

DSCF0313 L
DSCF0315 L
DSCF0317 L
DSCF0319 L

Fastening an M4x16 screw from the opposite side to hold the M4x16mm square nut in-place inside the Filter Frame using a hex screwdriver:

DSCF0320 L

Place the Filter Frame (with M4 nut inside facing down) onto the Filter Interface. +Create project issue

How to build a PAPRa Fan Box (96mm)

How-To guide for building the Tetra PAPRa fan box (96mm) (April 2024 build).

Quick Synopsis

The Tetra Powered Air Purified Respirator requires that the air be purified; this purification is accomplished by powering a fan to pull air through a filter and then pushing that purified air through a hose to a mask worn on the face. This section contains the instructions for building the box that holds the fan and filter.

The main goal of this iteration of the fan box is to reach N99 filtration levels by ensuring that the power connector is dustproof and using an IP68-rated BNC jack.

WARNING: we provide no warranty, implicit or explicit, that this device will work up to an N95 specification, when built outside of a facility rated to do so. The only way to truly test one of these devices using something like a Portacount under controlled conditions.

This particular version of the PAPRA has been tested to pass at an N99 level, and likely passes at an N100/P100 level, since the build uses P100 filters. We do not have the equipment necessary to validate that this device passes at a P100 level.

Parts Required

This photo shows all the parts laid out for building this component:

DSCF0197 X3

The assembly diagram is here.

3D Printed Parts

These parts should be printed at 0.2 or 0.15 spacing. They should be oriented such that the large plates are closest to the build plate:

Table 1. Table Printed Parts
PartPart NumberQuantityMaterialSupports required?STL File Location

The Fan Box (holds the fan)

P-TET-000140

1

PETG

No (Can have some in the nut pocket)

Fan box

Filter Interface

P-TET-000158

1

PETG

No (Can have some in the nut pocket)

Filter Interface

Filter Frame

P-TET-000159

1

PETG

No

Filter Frame

Weather Guard

P-TET-000143

1

PETG

No

Weather Guard

Fan Outlet Spout

P-TET-000144

1

PETG

No

Fan Outlet Spout

Fan Outlet Spacer

P-TET-000145

1

PETG

No

Fan Outlet Spacer

Fan Outlet Interface

P-TET-000152

1

PETG

No

Fan Outlet Interface

Spout ring

P-TET-000191

1

PETG

No

Spout ring

MOLLE Strap

P-TET-000153

1

PETG

No

MOLLE Strap

MOLLE Catch

P-TET-000154

1

PETG

No

MOLLE Catch

MOLLE Spacer

P-TET-000193

1

PETG

No

MOLLE Spacer

Gaskets

Gaskets should be cut from 2mm craft foam. Ideally, they should be cut by something such as Cricut (https://www.cricut.com/), but can also be cut using scissors or an Xacto knife so long as the templates are followed closely. The Cricut uses the supplied SVG files, and other cutters can use the supplied DXFs.

Table 2. Table Gaskets

Part

Part Number

Quantity

Material

Pattern (SVG)

Base Gasket

P-TET-000146

1

Craft Foam

Base Gasket

Fan Gasket

P-TET-000147

1

Craft Foam

Fan Gasket

Filter Gasket

P-TET-000148

1

Craft Foam

Filter Gasket

Outlet Gasket

P-TET-000149

1

Craft Foam

Outlet Gasket

Fan Outlet Spout Interface

P-TET-000152

1

Craft Foam

Fan Outlet Spout Interface

Vendor Bill Of Materials

These are components that need to be purchased. Prices fluctuate, and so are not included here. Alternative versions can be sourced, and we welcome edits for tested alternatives.

Table 3. Table Vendor Bill Of Materials (BOM)

Count

Description

URL

Number in Package

1

Sanyo Denki 9BMB12F201

Sanyo Denki

1

1

20 American Wire Gauge (awg) BNC cable

BNC cable

1

1

Dryer Vent Installation Tape

DryerTape

1

1

BNC Cable Jack Connector

Jack Connector

1

13

M4 16mm screws

13

M4 square nuts

1

BNC 20 gauge wire stays

Wire stays

1

1

Stealth Filters

Stealth Filters

2

Recommended Tools

These tools are recommended. URLs are for tools purchased and used in the building of the prototypes:

Table 4. Table Tool List
DescriptionURL

4-3/4 In. Bent Long Nose Pliers

Long Nose Pliers

A hex screwdriver for the m4 screws

hex screwdriver

Flush cutter

Flush cutter

X-acto knife

X-acto knife

3D Printer (note the size of the print bed for the fan box)

3D Printer

#0 Phillips head screwdriver

head screwdriver

CPAP hose cleaner (for maintenance)

CPAP hose cleaner

Cable Crimper

Cable Crimper

9/16 Nut Driver for the BNC

9/16 Nut Driver

Build Steps

Preparing the parts

Cut out the Gaskets Carefully.

DSCF0198 M
DSCF0202 M

Cut the tape into small piece’s

DSCF0208 M
DSCF0211 M

BNC Connection

A video on how to build the BNC connector:

Strip the red wire on the fan:

DSC4240 L

Connect the smaller brass component to the red wire:

DSC4242 L

Crimp the brass component to the wire:

DSC4261 L

Test that the crimp went well by tugging on the brass component:

DSC4263 L

Make sure to put the wires through the ground cylinder before connecting the brass component to the connector:

DSC4248 L

Push the brass component into the center of the connector.

DSC4264 L

Since the wire is braided, this step can be tricky, and a small item like a paperclip can help push the component into the middle of the connector:

DSC4268 L

Check that the brass component is visible and flush with the interior plastic column in the connector:

DSC4270 L

Tugging on the wire should not have the component pull out:

DSC4266 L

Strip the black wire:

DSC4275 L

Crimp the ground cylinder to the back of the connector with the black wire:

DSC4277 L

Another angle of the crimp:

DSC4278 L

Place the waterproof seal around the edge of the BNC jack:

DSC4282 L

Build Fan Box Assembly

Place the Fan Outlet Spacer (P-TET-000145) into the fan:

DSCF0214 M

Place the Fan Outlet Spacer (P-TET-000152) into the fan:

DSCF0215 M

Note the orientation:

DSCF0216 M

Begin taping the Fan Outlets into the fan:

DSCF0217 M

Cover all of the air gaps with dryer tape:

DSCF0233 M
DSCF0234 M

Place the base gasket (P-TET-000146) carefullyinto the fan box (P-TET-000140):

DSCF0235 M
DSCF0239 M
DSCF0240 L

Place the Fan Outlet Gasket (P-TET-000) inside the Fan Outlet Spout raised edge (P-TET-000144):

DSCF0245 M

Place the fan outlet spout (with gasket) into the fan box:

DSCF0247 M

Place the BNC jack into the fan box:

DSCF0249 M
DSCF0251 L

Make sure the BNC jack is seated in the hexagonal space:

DSCF0252 M

Place the washer around the BNC jack:

DSCF0254 M
DSCF0255 L

Place and the finger tighten hex nut on top of the washer and BNC jack:

DSCF0256 L
DSCF0257 L

Tighten the hex nut with a wrench:

DSCF0259 M

Place the fan (with outlet spout) into the box, holding the gasket in place:

DSCF0265 M

Push the wires in to the fan box.

DSCF0275 M
DSCF0277 L

Place the Fan Gasket (P-TET-000147) on the Fan box.

DSCF0278 L
DSCF0279 M

Connect Filter Interface to Fan Box Assembly

Place the filter interface on top of the fan box:

DSCF0282 L
DSCF0281 L

DSCF0284 L

Place 4x M4x16mm screws through the filter interface:

DSCF0286 L
DSCF0290 L
DSCF0291 L

Secure the filter interface onto the fan box with 4x M4x16 screws using a hex screwdriver:

DSCF0294 L
DSCF0295 L

Option to use an impact drill:

DSCF0297 L

Load the Filters into the Filter Frame

Place the Filter Gasket (P-TET-000148) onto the Filter interface (P-TET-000158):

DSCF0306 L
DSCF0307 L

Place the stealth filters into the filter gasket:

DSCF0309 L
DSCF0312 L

Place an M4 square nut into the center space of the Filter Frame (P-TET-000159):

DSCF0313 L
DSCF0315 L
DSCF0317 L
DSCF0319 L

Fastening an M4x16 screw from the opposite side to hold the M4x16mm square nut in-place inside the Filter Frame using a hex screwdriver:

DSCF0320 L

Place the Filter Frame (with M4 nut inside facing down) onto the Filter Interface. Make sure you get the orientation correct and avoiding direct contact with the filter:

DSCF0324 L

Place 4x M4 nuts into the corner spaces of the Filter Interface, screwing in M4x16 screws in the process to secure the Filter Frame onto the Filter Interfac with a hex screwdriver:

DSCF0328 L
DSCF0330 L
DSCF0334 L

Remove the center-piece M4 scew:

DSCF0338 L

Secure the weather guard ontop of the fanbax assembly with an M4 screw using a hex screwdriver:

DSCF0342 L

Attach fanbox MOLLE strapped backpack

Insert the MOLLE Strap (P-TET-000153) into the MOLLE Spacer (P-TET-000193):

DSCF0344 L
DSCF0345 L

Secure the MOLLE strap (with MOLLE spacer) onto fanbax with M4x16 screws with 2x M4x16 screws using a hex screwdriver:

DSCF0346 L
DSCF0349 L
DSCF0349 L

Secure the MOLLE Catch (P-TET-000154) between the MOLLE strap and fanbox with 2x M4x16 screws using a hex screwdrivef

DSCF0356 L
DSCF0353 L

Congratulations!

Congratulations! You’ve now built a Tetra PAPRa Fan Box!

DSCF0360 X3

Questions

How frequently should I change the filter?

Changing the filter depends on how much you use the device. If you’re using the device where there are a lot of particulates in the air (such as a construction site or a woodshop), you may want to change every month or so. If you’re using the device where there are less particulates, every two to three months should be fine. HEPA filters just get dirtier and eventually the fan will have a hard time pulling air through the filter, and the filter should be swapped before that happens.

Can I use any random HEPA filter?

This particular box was built around the Klein Tools p100 filter. Off-brand filters may not be as effective, so be sure that the filter is NIOSH certified.

Is the fan box waterproof?

No, the fan box is not water proof. With the weather guard in place, water should not get into the filter directly, but increased humidity could decrease the effectiveness of the device.

Any other maintenance tasks?

It is important to periodically check that the nuts are tight on the fan box, to ensure that the box is properly sealed against the elements. Hoses should also be cleaned periodically as well.

-
Last modified April 6, 2024: fix overview picture for build guide (7c270b5)
\ No newline at end of file +
Last modified July 19, 2024: Removed the trailing space as suggested. (00cdbbb)
\ No newline at end of file diff --git a/v1.1/index.html b/v1.1/index.html index e1bc305..7694951 100644 --- a/v1.1/index.html +++ b/v1.1/index.html @@ -6,5 +6,5 @@ PAPRa N95 Testing Guide (March 2021 Edition) PAPRa Pressure Testing (October 2022)
Edit this page Create documentation issue -Create project issue

PAPRa Build Guide (April 2024 Edition)

How to build the April 2024 version of the Tetra PAPR.

Quick Synopsis

This guide will walk you through how to build a Powered Air Purifying Respirator, also known as a PAPR. We assume that you have some knowledge of 3D-printing, and cutting foam with a knife or using a stencil or a cricut, and perhaps some soldering. In the end, you will have four things: a box with a filter and a fan in it, a second box with batteries and a fan controller, a mask, and straps and hoses to hold it all together.

Please note that this system will not protect you from anything landing in your eyes. For that protection, either the mask will need to be modified to be a helmet or you will need a face shield.

WARNING: we provide no warranty, implicit or explicit, that this device will work up to an N95 specification, a P100 specification, or any other standard, when built outside of a facility rated to do so. The only way to truly test one of these devices using something like a Portacount under controlled conditions.

Please refer to the Testing section for the flow and fit testing done to verify PAPR functionality.

Parts needed

The entire set of parts to build the PAPR is:

tinkerer SKU updated M

There are three components to build:

  1. The M12 Controller

  2. The Fan Box

  3. The Mask

And the instructions to build all of these components can be found in the Tetra PAPRA Components section.

How to build a PAPRa Fan Box (96mm)

How-To guide for building the Tetra PAPRa fan box (96mm) (April 2024 build).

How to build a PAPRa m12 Battery Controller (April 2024)

How-To guide for building the Tetra PAPRa m12 battery controller (April 2024 version).

How to build a PAPRa Mask (June 2022 Version)

How-To guide for building the Tetra PAPRa mask (June 2022 version).

PAPRa Printed Circuit Board Assembly

The printed circuit board assembly (thru hole version) for the Tetra PAPRa M12 controller

-
Last modified April 6, 2024: fix overview picture for build guide (7c270b5)
\ No newline at end of file +Create project issue

PAPRa Build Guide (April 2024 Edition)

How to build the April 2024 version of the Tetra PAPR.

Quick Synopsis

This guide will walk you through how to build a Powered Air Purifying Respirator, also known as a PAPR. We assume that you have some knowledge of 3D-printing, and cutting foam with a knife or using a stencil or a cricut, and perhaps some soldering. In the end, you will have four things: a box with a filter and a fan in it, a second box with batteries and a fan controller, a mask, and straps and hoses to hold it all together.

Please note that this system will not protect you from anything landing in your eyes. For that protection, either the mask will need to be modified to be a helmet or you will need a face shield.

Warning
we provide no warranty, implicit or explicit, that this device will work up to an N95 specification, a P100 specification, or any other standard, when built outside of a facility rated to do so. The only way to truly test one of these devices using something like a Portacount under controlled conditions.

Please refer to the Testing section for the flow and fit testing done to verify PAPR functionality.

Parts needed

The entire set of parts to build the PAPR is:

tinkerer SKU updated M

There are three components to build:

  1. The M12 Controller

  2. The Fan Box

  3. The Mask

And the instructions to build all of these components can be found in the Tetra PAPRA Components section.

How to build a PAPRa Fan Box (96mm)

How-To guide for building the Tetra PAPRa fan box (96mm) (April 2024 build).

How to build a PAPRa m12 Battery Controller (April 2024)

How-To guide for building the Tetra PAPRa m12 battery controller (April 2024 version).

How to build a PAPRa Mask (June 2022 Version)

How-To guide for building the Tetra PAPRa mask (June 2022 version).

PAPRa Printed Circuit Board Assembly

The printed circuit board assembly (thru hole version) for the Tetra PAPRa M12 controller

+
Last modified July 19, 2024: Removed the trailing space as suggested. (00cdbbb)
\ No newline at end of file diff --git a/v1.1/index.xml b/v1.1/index.xml index fcb31d9..62e50ca 100644 --- a/v1.1/index.xml +++ b/v1.1/index.xml @@ -63,89 +63,89 @@ <td class="tableblock halign-left valign-top"><p class="tableblock">The Fan Box (holds the fan)</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">P-TET-000140</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock">PLA/PETG</p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock">PETG</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">No (Can have some in the nut pocket)</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000140%20Base%20Sanyo.st" class="bare">https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000140%20Base%20Sanyo.st</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000140%20Base%20Sanyo.stl">Fan box</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">Filter Interface</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">P-TET-000158</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock">PLA/PETG</p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock">PETG</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">No (Can have some in the nut pocket)</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000158%20Stealth%20Filter%20Interface%20Sanyo.stl" class="bare">https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000158%20Stealth%20Filter%20Interface%20Sanyo.stl</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000158%20Stealth%20Filter%20Interface%20Sanyo.stl">Filter Interface</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">Filter Frame</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">P-TET-000159</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock">PLA/PETG</p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock">PETG</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">No</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000159%20Stealth%20Filter%20Frame%20Sanyo.stl" class="bare">https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000159%20Stealth%20Filter%20Frame%20Sanyo.stl</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000159%20Stealth%20Filter%20Frame%20Sanyo.stl">Filter Frame</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">Weather Guard</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">P-TET-000143</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock">PLA/PETG</p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock">PETG</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">No</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000159%20Stealth%20Filter%20Frame%20Sanyo.stl" class="bare">https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000159%20Stealth%20Filter%20Frame%20Sanyo.stl</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000159%20Stealth%20Filter%20Frame%20Sanyo.stl">Weather Guard</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">Fan Outlet Spout</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">P-TET-000144</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock">PLA/PETG</p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock">PETG</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">No</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000144%20Spout.stl" class="bare">https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000144%20Spout.stl</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000144%20Spout.stl">Fan Outlet Spout</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">Fan Outlet Spacer</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">P-TET-000145</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock">PLA/PETG</p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock">PETG</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">No</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000145%20Spacer.stl" class="bare">https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000145%20Spacer.stl</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000145%20Spacer.stl">Fan Outlet Spacer</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">Fan Outlet Interface</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">P-TET-000152</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock">PLA/PETG</p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock">PETG</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">No</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000152%20Spout%20Interface.stl" class="bare">https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000152%20Spout%20Interface.stl</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000152%20Spout%20Interface.stl">Fan Outlet Interface</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">Spout ring</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">P-TET-000191</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock">PLA/PETG</p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock">PETG</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">No</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000191%20Spout%20Ring.stl" class="bare">https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000191%20Spout%20Ring.stl</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000191%20Spout%20Ring.stl">Spout ring</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">MOLLE Strap</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">P-TET-000153</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock">PLA/PETG</p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock">PETG</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">No</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000153%20MOLLE%20Strap.stl" class="bare">https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000153%20MOLLE%20Strap.stl</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000153%20MOLLE%20Strap.stl">MOLLE Strap</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">MOLLE Catch</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">P-TET-000154</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock">PLA/PETG</p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock">PETG</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">No</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000154%20MOLLE%20Catch.stl" class="bare">https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000154%20MOLLE%20Catch.stl</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000154%20MOLLE%20Catch.stl">MOLLE Catch</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">MOLLE Spacer</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">P-TET-000193</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock">PLA/PETG</p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock">PETG</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">No</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000193%20MOLLE%20Spacer.stl" class="bare">https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000193%20MOLLE%20Spacer.stl</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/fan_box/96mm%20Stealth%20Parts/P-TET-000193%20MOLLE%20Spacer.stl">MOLLE Spacer</a></p></td> </tr> </tbody> </table> @@ -179,35 +179,35 @@ <td class="tableblock halign-left valign-top"><p class="tableblock">P-TET-000146</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">Craft Foam</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/Gaskets/96mm%20Stealth%20Sanyo%20PAPRa/P-TET-000146%2096mm%20Base%20Gasket.svg" class="bare">https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/Gaskets/96mm%20Stealth%20Sanyo%20PAPRa/P-TET-000146%2096mm%20Base%20Gasket.svg</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/Gaskets/96mm%20Stealth%20Sanyo%20PAPRa/P-TET-000146%2096mm%20Base%20Gasket.svg">Base Gasket</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">Fan Gasket</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">P-TET-000147</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">Craft Foam</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/Gaskets/96mm%20Stealth%20Sanyo%20PAPRa/P-TET-000147%2096mm%20Fan%20Gasket.svg" class="bare">https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/Gaskets/96mm%20Stealth%20Sanyo%20PAPRa/P-TET-000147%2096mm%20Fan%20Gasket.svg</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/Gaskets/96mm%20Stealth%20Sanyo%20PAPRa/P-TET-000147%2096mm%20Fan%20Gasket.svg">Fan Gasket</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">Filter Gasket</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">P-TET-000148</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">Craft Foam</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/db2500507c2c03987185a34bd57795aa45caed02/Gaskets/96mm%20Stealth%20Sanyo%20PAPRa/P-TET-000148%2096mm%20Filter%20Gasket.svg" class="bare">https://github.com/tetrabiodistributed/papr-print-files/blob/db2500507c2c03987185a34bd57795aa45caed02/Gaskets/96mm%20Stealth%20Sanyo%20PAPRa/P-TET-000148%2096mm%20Filter%20Gasket.svg</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/db2500507c2c03987185a34bd57795aa45caed02/Gaskets/96mm%20Stealth%20Sanyo%20PAPRa/P-TET-000148%2096mm%20Filter%20Gasket.svg">Filter Gasket</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">Outlet Gasket</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">P-TET-000149</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">Craft Foam</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/db2500507c2c03987185a34bd57795aa45caed02/Gaskets/96mm%20Stealth%20Sanyo%20PAPRa/P-TET-000149%2096mm%20Outlet%20Gasket.svg" class="bare">https://github.com/tetrabiodistributed/papr-print-files/blob/db2500507c2c03987185a34bd57795aa45caed02/Gaskets/96mm%20Stealth%20Sanyo%20PAPRa/P-TET-000149%2096mm%20Outlet%20Gasket.svg</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/db2500507c2c03987185a34bd57795aa45caed02/Gaskets/96mm%20Stealth%20Sanyo%20PAPRa/P-TET-000149%2096mm%20Outlet%20Gasket.svg">Outlet Gasket</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">Fan Outlet Spout Interface</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">P-TET-000152</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">Craft Foam</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/Gaskets/96mm%20Stealth%20Sanyo%20PAPRa/P-TET-000152%2096mm%20Fan%20Outlet%20Spout%20Interface.svg" class="bare">https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/Gaskets/96mm%20Stealth%20Sanyo%20PAPRa/P-TET-000152%2096mm%20Fan%20Outlet%20Spout%20Interface.svg</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/Gaskets/96mm%20Stealth%20Sanyo%20PAPRa/P-TET-000152%2096mm%20Fan%20Outlet%20Spout%20Interface.svg">Fan Outlet Spout Interface</a></p></td> </tr> </tbody> </table> @@ -237,25 +237,25 @@ <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">Sanyo Denki 9BMB12F201</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://octopart.com/9bmb12f201-sanyo+denki-24320259" class="bare">https://octopart.com/9bmb12f201-sanyo+denki-24320259</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://octopart.com/9bmb12f201-sanyo+denki-24320259">Sanyo Denki</a></p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">20 American Wire Gauge (awg) BNC cable</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.jameco.com/z/205-523-Steren-Electronics-Cable-Assembly-RG58-U-36-Bnc-To-Bnc-50-Ohm_11404.html" class="bare">https://www.jameco.com/z/205-523-Steren-Electronics-Cable-Assembly-RG58-U-36-Bnc-To-Bnc-50-Ohm_11404.html</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.jameco.com/z/205-523-Steren-Electronics-Cable-Assembly-RG58-U-36-Bnc-To-Bnc-50-Ohm_11404.html">BNC cable</a></p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">Dryer Vent Installation Tape</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="http://www.nashuatape.com/" class="bare">http://www.nashuatape.com/</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="http://www.nashuatape.com/">DryerTape</a></p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">BNC Cable Jack Connector</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://octopart.com/112517-amphenol+rf-50123148" class="bare">https://octopart.com/112517-amphenol+rf-50123148</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://octopart.com/112517-amphenol+rf-50123148">Jack Connector</a></p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> </tr> <tr> @@ -273,7 +273,7 @@ <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">BNC 20 gauge wire stays</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.jameco.com/z/205-523-Steren-Electronics-Cable-Assembly-RG58-U-36-Bnc-To-Bnc-50-Ohm_11404.html" class="bare">https://www.jameco.com/z/205-523-Steren-Electronics-Cable-Assembly-RG58-U-36-Bnc-To-Bnc-50-Ohm_11404.html</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.jameco.com/z/205-523-Steren-Electronics-Cable-Assembly-RG58-U-36-Bnc-To-Bnc-50-Ohm_11404.html">Wire stays</a></p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> </tr> <tr> @@ -307,39 +307,39 @@ <tbody> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">4-3/4 In. Bent Long Nose Pliers</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.harborfreight.com/4-34-in-bent-long-nose-pliers-63819.html" class="bare">https://www.harborfreight.com/4-34-in-bent-long-nose-pliers-63819.html</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.harborfreight.com/4-34-in-bent-long-nose-pliers-63819.html">Long Nose Pliers</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">A hex screwdriver for the m4 screws</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.amazon.com/gp/product/B007ICWAJC" class="bare">https://www.amazon.com/gp/product/B007ICWAJC</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.amazon.com/gp/product/B007ICWAJC">hex screwdriver</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">Flush cutter</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.harborfreight.com/micro-flush-cutter-90708.html" class="bare">https://www.harborfreight.com/micro-flush-cutter-90708.html</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.harborfreight.com/micro-flush-cutter-90708.html">Flush cutter</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">X-acto knife</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.amazon.com/Xacto-X3201-N0-Precision-Knife/dp/B00004Z2TQ" class="bare">https://www.amazon.com/Xacto-X3201-N0-Precision-Knife/dp/B00004Z2TQ</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.amazon.com/Xacto-X3201-N0-Precision-Knife/dp/B00004Z2TQ">X-acto knife</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">3D Printer (note the size of the print bed for the fan box)</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.prusa3d.com/category/original-prusa-mk4/" class="bare">https://www.prusa3d.com/category/original-prusa-mk4/</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.prusa3d.com/category/original-prusa-mk4/">3D Printer</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">#0 Phillips head screwdriver</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.homedepot.com/p/Husky-8-in-1-Screwdriver-with-LED-Light-232360016/301959976" class="bare">https://www.homedepot.com/p/Husky-8-in-1-Screwdriver-with-LED-Light-232360016/301959976</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.homedepot.com/p/Husky-8-in-1-Screwdriver-with-LED-Light-232360016/301959976">head screwdriver</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">CPAP hose cleaner (for maintenance)</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.amazon.com/Cleaning-DreamStation-Diameter-Stainless-Cleaner/dp/B08HLQV2VK/" class="bare">https://www.amazon.com/Cleaning-DreamStation-Diameter-Stainless-Cleaner/dp/B08HLQV2VK/</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.amazon.com/Cleaning-DreamStation-Diameter-Stainless-Cleaner/dp/B08HLQV2VK/">CPAP hose cleaner</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">Cable Crimper</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.amazon.com/IWISS-Crimping-Swaging-Aluminum-Sleeves/dp/B00JW4X4TO/ref=sr_1_20?dchild=1&amp;keywords=cable+crimping+tool&amp;qid=1630860032&amp;sr=8-20" class="bare">https://www.amazon.com/IWISS-Crimping-Swaging-Aluminum-Sleeves/dp/B00JW4X4TO/ref=sr_1_20?dchild=1&amp;keywords=cable+crimping+tool&amp;qid=1630860032&amp;sr=8-20</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.amazon.com/IWISS-Crimping-Swaging-Aluminum-Sleeves/dp/B00JW4X4TO/ref=sr_1_20?dchild=1&amp;keywords=cable+crimping+tool&amp;qid=1630860032&amp;sr=8-20">Cable Crimper</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">9/16 Nut Driver for the BNC</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.milwaukeetool.com/Products-Repository/North-America/Hand-Tools/Screwdrivers/48-22-2427" class="bare">https://www.milwaukeetool.com/Products-Repository/North-America/Hand-Tools/Screwdrivers/48-22-2427</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.milwaukeetool.com/Products-Repository/North-America/Hand-Tools/Screwdrivers/48-22-2427">9/16 Nut Driver</a></p></td> </tr> </tbody> </table> @@ -988,65 +988,65 @@ Make sure you get the orientation correct and avoiding direct contact with the f <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">Knob</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock">PLA/PETG</p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock">PETG</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">No</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fad8cd5e584b/STLs/battery_controller/P-TET-000100%20M12%20Knob.stl" class="bare">https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fad8cd5e584b/STLs/battery_controller/P-TET-000100%20M12%20Knob.stl</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fad8cd5e584b/STLs/battery_controller/P-TET-000100%20M12%20Knob.stl">Knob</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">Body One Piece (alternative part for Body + Light Panel)</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock">Transparent PLA/PETG</p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock">Transparent PETG</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">No</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000101%20M12%20Body%20One%20Piece.stl" class="bare">https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000101%20M12%20Body%20One%20Piece.stl</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000101%20M12%20Body%20One%20Piece.stl">Body One Piece</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">Plate</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock">PLA/PETG</p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock">PETG</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">No</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000170%20M12%20Plate.stl" class="bare">https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000170%20M12%20Plate.stl</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000170%20M12%20Plate.stl">Plate</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">MOLLE Strap</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock">PLA/PETG</p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock">PETG</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">No</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000171%20M12%20MOLLE%20Strap.stl" class="bare">https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000171%20M12%20MOLLE%20Strap.stl</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000171%20M12%20MOLLE%20Strap.stl">MOLLE Strap</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">MOLLE Catch</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock">PLA/PETG</p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock">PETG</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">No</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000172%20M12%20MOLLE%20Catch.stl" class="bare">https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000172%20M12%20MOLLE%20Catch.stl</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000172%20M12%20MOLLE%20Catch.stl">MOLLE Catch</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">Body</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock">PLA/PETG</p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock">PETG</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">No</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000101%20M12%20Body%20One%20Piece.stl" class="bare">https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000101%20M12%20Body%20One%20Piece.stl</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000101%20M12%20Body%20One%20Piece.stl">Body</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">Lid</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock">PLA/PETG</p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock">PETG</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">No</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000174%20M12%20Lid.stl" class="bare">https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000174%20M12%20Lid.stl</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000174%20M12%20Lid.stl">Lid</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">Lid</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock">PLA/PETG</p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock">PETG</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">No</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000194%20M12%20MOLLE%20Spacer.stl" class="bare">https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000194%20M12%20MOLLE%20Spacer.stl</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000194%20M12%20MOLLE%20Spacer.stl">Lid</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">Light Panel</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock">Transparent PLA/PETG</p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock">Transparent PETG</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">No</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000195%20M12%20Light%20Panel.stl" class="bare">https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000195%20M12%20Light%20Panel.stl</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000195%20M12%20Light%20Panel.stl">Light Panel</a></p></td> </tr> </tbody> </table> @@ -1078,13 +1078,13 @@ Make sure you get the orientation correct and avoiding direct contact with the f <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">Printed Circuit Board Assembly</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/PAPRA-PCBA" class="bare">https://github.com/tetrabiodistributed/PAPRA-PCBA</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/PAPRA-PCBA">PCBA</a></p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">2Pack Upgraded 3.5Ah M 12 Battery for Milwaukee 12V Battery Lithium XC M 12B Batteries</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.amazon.com/gp/product/B082WW688D/" class="bare">https://www.amazon.com/gp/product/B082WW688D/</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.amazon.com/gp/product/B082WW688D/">Battery</a></p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">2</p></td> </tr> <tr> @@ -1124,11 +1124,11 @@ Make sure you get the orientation correct and avoiding direct contact with the f <tbody> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">A hex screwdriver for the M4 screws</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.amazon.com/gp/product/B007ICWAJC" class="bare">https://www.amazon.com/gp/product/B007ICWAJC</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.amazon.com/gp/product/B007ICWAJC">Hex Screwdriver</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">A 10mm socket wrench</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.amazon.com/gp/product/B0009ORXRU/" class="bare">https://www.amazon.com/gp/product/B0009ORXRU/</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.amazon.com/gp/product/B0009ORXRU/">Socket wrench</a></p></td> </tr> </tbody> </table> @@ -1429,17 +1429,17 @@ Make sure you get the orientation correct and avoiding direct contact with the f <td class="tableblock halign-left valign-top"><p class="tableblock">Right-angle Connector</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">P-TET-000150</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">2</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock">PET/PLA</p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock">PETG</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">Yes</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/ae647b7905ae6b9a0845f862daef6b815cd362d1/STLs/3M%20Adapter/P-TET-000150_Right_Angle_Hose_Connector.stl" class="bare">https://github.com/tetrabiodistributed/papr-print-files/blob/ae647b7905ae6b9a0845f862daef6b815cd362d1/STLs/3M%20Adapter/P-TET-000150_Right_Angle_Hose_Connector.stl</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/ae647b7905ae6b9a0845f862daef6b815cd362d1/STLs/3M%20Adapter/P-TET-000150_Right_Angle_Hose_Connector.stl">Right-angle Connector</a></p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">Y Connector</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">P-TET-000150</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock">PET/PLA</p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock">PETG</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">No</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/ae647b7905ae6b9a0845f862daef6b815cd362d1/STLs/3M%20Adapter/P-TET-000151_Y_Splitter.stl" class="bare">https://github.com/tetrabiodistributed/papr-print-files/blob/ae647b7905ae6b9a0845f862daef6b815cd362d1/STLs/3M%20Adapter/P-TET-000151_Y_Splitter.stl</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/ae647b7905ae6b9a0845f862daef6b815cd362d1/STLs/3M%20Adapter/P-TET-000151_Y_Splitter.stl">Y Connector</a></p></td> </tr> </tbody> </table> @@ -1471,19 +1471,19 @@ Make sure you get the orientation correct and avoiding direct contact with the f <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">CPAP Hose (possible candidate-- this product is 3 feet, you may want something longer or shorter. Refer to <a href="https://github.com/tetrabiodistributed/papra/issues/48" class="bare">https://github.com/tetrabiodistributed/papra/issues/48</a> for alternatives)</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.amazon.com/Gray-Standard-CPAP-Tubing-foot/dp/B073GBQN73" class="bare">https://www.amazon.com/Gray-Standard-CPAP-Tubing-foot/dp/B073GBQN73</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.amazon.com/Gray-Standard-CPAP-Tubing-foot/dp/B073GBQN73">CPAP Hose</a></p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1, 3ft</p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">2</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">Stiff Ventilator hosing (999) 22mm</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://hitechmedical.net/products/999-2/" class="bare">https://hitechmedical.net/products/999-2/</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://hitechmedical.net/products/999-2/">Stiff Ventilator hosing</a></p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1 length, 200 yards</p></td> </tr> <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">3M 6200 Model Mask</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.amazon.com/3M-Respirator-6200-Respiratory-Protection/dp/B007JZ1N00" class="bare">https://www.amazon.com/3M-Respirator-6200-Respiratory-Protection/dp/B007JZ1N00</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://www.amazon.com/3M-Respirator-6200-Respiratory-Protection/dp/B007JZ1N00">Mask</a></p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> </tr> </tbody> @@ -1574,7 +1574,7 @@ Make sure you get the orientation correct and avoiding direct contact with the f <h2 id="_my_hose_is_smelling_what_can_i_do_about_that">My hose is smelling. What can I do about that?</h2> <div class="sectionbody"> <div class="paragraph"> -<p>You can clean the hose with a 22mm cleaning brush (like <a href="https://www.amazon.com/JAKIA-CPAP-Brush-Cleaning-7inch/dp/B089Q6QH1X" class="bare">https://www.amazon.com/JAKIA-CPAP-Brush-Cleaning-7inch/dp/B089Q6QH1X</a>). Soap and water should be sufficient. We’ve found that the hose material can begin to smell if exposed to quite a bit of sunlight, such as wearing the PAPR in the desert, and this smell wears off after some time.</p> +<p>You can clean the hose with a 22mm cleaning brush (like <a href="https://www.amazon.com/JAKIA-CPAP-Brush-Cleaning-7inch/dp/B089Q6QH1X)">Cleaning Brush</a>. Soap and water should be sufficient. We’ve found that the hose material can begin to smell if exposed to quite a bit of sunlight, such as wearing the PAPR in the desert, and this smell wears off after some time.</p> </div> </div> </div>V1.1: PAPRa Printed Circuit Board Assemblyhttps://tetrabiodistributed.github.io/papra/v1.1/papra-pcba/Mon, 01 Jan 0001 00:00:00 +0000https://tetrabiodistributed.github.io/papra/v1.1/papra-pcba/ @@ -1584,17 +1584,8 @@ Make sure you get the orientation correct and avoiding direct contact with the f <div class="paragraph"> <p>The following is the board diagram for the M12 controller PCB. Further information can be found in <a href="https://github.com/tetrabiodistributed/PAPRA-PCB">the PAPRA-PCB project.</a></p> </div> -<div class="admonitionblock warning"> -<table> -<tbody><tr> -<td class="icon"> -<div class="title">Warning</div> -</td> -<td class="content"> -we provide no warranty, implicit or explicit, that this device will work up to an N95 specification, when built outside of a facility rated to do so. The only way to truly test one of these devices using something like a <a href="https://tsi.com/products/respirator-fit-testers/portacount-respirator-fit-tester-8038/">Portacount</a> under controlled conditions. -</td> -</tr> -</tbody></table> +<div class="paragraph"> +<p>WARNING:we provide no warranty, implicit or explicit, that this device will work up to an N95 specification, when built outside of a facility rated to do so. The only way to truly test one of these devices using something like a <a href="https://tsi.com/products/respirator-fit-testers/portacount-respirator-fit-tester-8038/">Portacount</a> under controlled conditions.</p> </div> <div class="paragraph"> <p>Enter at your own risk.</p> @@ -1850,9 +1841,9 @@ we provide no warranty, implicit or explicit, that this device will work up to a <tr> <td class="tableblock halign-left valign-top"><p class="tableblock">Tetra-PCB-jig-v3</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">1</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock">PLA/PETG</p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock">PETG</p></td> <td class="tableblock halign-left valign-top"><p class="tableblock">No</p></td> -<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/d0c51e8a21a43540b39c50ecf9295a17e224a93b/STLs/Tetra-PCB-jig-v3.stl" class="bare">https://github.com/tetrabiodistributed/papr-print-files/blob/d0c51e8a21a43540b39c50ecf9295a17e224a93b/STLs/Tetra-PCB-jig-v3.stl</a></p></td> +<td class="tableblock halign-left valign-top"><p class="tableblock"><a href="https://github.com/tetrabiodistributed/papr-print-files/blob/d0c51e8a21a43540b39c50ecf9295a17e224a93b/STLs/Tetra-PCB-jig-v3.stl">PCB Jig</a></p></td> </tr> </tbody> </table> @@ -1861,8 +1852,12 @@ we provide no warranty, implicit or explicit, that this device will work up to a <div class="sect1"> <h2 id="_build_instructions">Build instructions</h2> <div class="sectionbody"> -<div class="paragraph"> +<div class="ulist"> +<ul> +<li> <p>Download the PCB Jig STL from Github and print it.</p> +</li> +</ul> </div> <div class="imageblock"> <div class="content"> @@ -1872,23 +1867,31 @@ we provide no warranty, implicit or explicit, that this device will work up to a <div class="paragraph"> <p>The larger gaps are to aid the positioning of the battery terminals.</p> </div> -<div class="paragraph"> +<div class="ulist"> +<ul> +<li> <p>Place the board on the PCB Jig. The markings should be upside down.</p> -</div> -<div class="paragraph"> +</li> +<li> <p>Insert the LEDs with the Anode facing away from the test points.</p> -</div> -<div class="paragraph"> +</li> +<li> <p>Insert the LEDS in the D1, D3, D4, D5 and D7</p> +</li> +</ul> </div> <div class="imageblock"> <div class="content"> <img src="https://photos.smugmug.com/Tetra-Testing/PCBA-Thruhole-Board-Assembly-v1/i-xLnHxBj/0/DKFtHJwLHKF22dwXTxZKXMFW4QNJt77mhmCpBmDpM/M/pcb-on-jig-M.png" alt="420"/> </div> </div> -<div class="paragraph"> +<div class="ulist"> +<ul> +<li> <p>Flip the Board carefully and align the LEDs with the holes in the jig Push them into place until they touch the work surface.</p> +</li> +</ul> </div> <div class="imageblock"> <div class="content"> diff --git a/v1.1/m12-controller/index.html b/v1.1/m12-controller/index.html index 41b9f98..f5b5663 100644 --- a/v1.1/m12-controller/index.html +++ b/v1.1/m12-controller/index.html @@ -1,4 +1,4 @@ -How to build a PAPRa m12 Battery Controller (April 2024) | PAPRaHow to build a PAPRa m12 Battery Controller (April 2024) | PAPRa
+How to build a PAPRa m12 Battery Controller (April 2024) | PAPRaHow to build a PAPRa m12 Battery Controller (April 2024) | PAPRa
Edit this page Create documentation issue -Create project issue

How to build a PAPRa m12 Battery Controller (April 2024)

How-To guide for building the Tetra PAPRa m12 battery controller (April 2024 version).

Quick Synopsis

The Tetra Powered Air Purified Respirator requires power to function, and the m12 battery controller provides that power for these models. The controller consists of internal circuitry, a potentiometer to adjust fan speeds, a cable to connect to the fan box, and a port for a Milwaulkee M12 Battery to be inserted.

This build differs from the v1 version in that it uses a custom-built circuitboard to remove many of the difficult steps of the build, add a battery charge indicator, and a separate power port for use in a car. If you cannot get the custom board, then please refer to the v1 version of this guide.

WARNING: we provide no warranty, implicit or explicit, that this device will work up to an N95 specification, when built outside of a facility rated to do so. The only way to truly test one of these devices using something like a Portacount under controlled conditions.

Parts Required

This build will require printed parts, purchased parts, and several tools. Here is a picture of all the components used in this build:

DSCF0364 X3

And the assembly diagram can be found here. Note that this assembly calls for version 0.7 of the board.

3D Printed Parts

These parts should be printed at 0.2 spacing:

Table 1. Table Printed Parts
PartQuantityMaterialSupports Required?STL File Location

Knob

1

PLA/PETG

No

https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fad8cd5e584b/STLs/battery_controller/P-TET-000100%20M12%20Knob.stl

Body One Piece (alternative part for Body + Light Panel)

1

Transparent PLA/PETG

No

https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000101%20M12%20Body%20One%20Piece.stl

Plate

1

PLA/PETG

No

https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000170%20M12%20Plate.stl

MOLLE Strap

1

PLA/PETG

No

https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000171%20M12%20MOLLE%20Strap.stl

MOLLE Catch

1

PLA/PETG

No

https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000172%20M12%20MOLLE%20Catch.stl

Body

1

PLA/PETG

No

https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000101%20M12%20Body%20One%20Piece.stl

Lid

1

PLA/PETG

No

https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000174%20M12%20Lid.stl

Lid

1

PLA/PETG

No

https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000194%20M12%20MOLLE%20Spacer.stl

Light Panel

1

Transparent PLA/PETG

No

https://github.com/tetrabiodistributed/papr-print-files/blob/f77c5bc3c5f0d8fadfdf2757c59a09a8cd5e584b/STLs/battery_controller/P-TET-000195%20M12%20Light%20Panel.stl

Bill Of Materials

You will need these components. Prices fluctuate, and so are not included here. Alternative versions can be sourced, and we welcome edits for tested alternatives.

Table 2. Table Bill Of Materials (BOM)
CountDescriptionURLNumber in Package

1

Printed Circuit Board Assembly

https://github.com/tetrabiodistributed/PAPRA-PCBA

1

1

2Pack Upgraded 3.5Ah M 12 Battery for Milwaukee 12V Battery Lithium XC M 12B Batteries

https://www.amazon.com/gp/product/B082WW688D/

2

3

Washers

Should come with the board

3

3

Nuts

Should come with the board

3

Recommeded Tools

These tools are recommended. URLs are for tools purchased and used in the building of the prototypes:

Table 3. Table Tool List
DescriptionURL

A hex screwdriver for the M4 screws

https://www.amazon.com/gp/product/B007ICWAJC

A 10mm socket wrench

https://www.amazon.com/gp/product/B0009ORXRU/

Build Instructions

Building this version of the controller is more a matter of ensuring that the Controller Box was printed cleanly and all support material is properly removed.

Attach Light Panel to body (unless using fully transparent one piece body):

DSCF0367 X3
DSCF0369 X3
DSCF0370 X3

Place the printed circuit board assembly battery leads into Plate:

DSCF0372 X3
DSCF0374 X3
DSCF0375 X3

Place the printed circuit board assembly with Plate into the Body:

DSCF0377 X3
DSCF0378 X3
DSCF0381 X3

Place washer over the power port, then finger tighten a hex nut over the same power port to hold the Plate in place:

DSCF0382 X3
DSCF0385 X3
DSCF0387 X3

Put the lid onto the body:

DSCF0389 X3
DSCF0392 X3

Place washer over BNC jack, then finger tighten a hex nut over the same BNC jack:

DSCF0393 X3
DSCF0394 X3
DSCF0395 X3

Place washer over potentiometer, then finger tighten a hex nut over the same potentiometer:

DSCF0397 X3
DSCF0398 X3
DSCF0399 X3
DSCF0400 X3

Use socket wrench to tighten hex nuts into place:

DSCF0402 X3
DSCF0404 X3

Attach 2X MOLLE spacers onto MOLLE strap:

DSCF0408 X3
DSCF0411 X3

Attach and screw MOLLE strap (with spacers) onto lid with M4 screws using a hex screwdriver:

DSCF0416 X3
DSCF0417 X3
DSCF0418 X3

Attach and secure MOLLE Catch onto MOLLE Strap and Lid with M4 screws using hex screwdriver:

DSCF0420 X3
DSCF0421 X3
DSCF0423 X3
DSCF0427 X3

Attach knob onto potentiometer:

DSCF0431 X3
DSCF0432 X3

Insert m12 battery:

DSCF0435 X3

Turn knob to turn on power (it should beep and flash an LED battery level indicator):

DSCF0437 X3
DSCF0438 X3

Test m12 battery controller with fan box by attaching a BNC cable:

DSCF0440 X3

Congratulations! You have built a Tetra PAPRa M12 Controller Box v4 (August 2021)!

DSCF0443 X3
-
Last modified April 6, 2024: update build guide for m12 controller as per april 2024 build (a6accfa)
\ No newline at end of file +Create project issue

How to build a PAPRa m12 Battery Controller (April 2024)

How-To guide for building the Tetra PAPRa m12 battery controller (April 2024 version).

Quick Synopsis

The Tetra Powered Air Purified Respirator requires power to function, and the m12 battery controller provides that power for these models. The controller consists of internal circuitry, a potentiometer to adjust fan speeds, a cable to connect to the fan box, and a port for a Milwaulkee M12 Battery to be inserted.

This build differs from the v1 version in that it uses a custom-built circuitboard to remove many of the difficult steps of the build, add a battery charge indicator, and a separate power port for use in a car. If you cannot get the custom board, then please refer to the v1 version of this guide.

WARNING: we provide no warranty, implicit or explicit, that this device will work up to an N95 specification, when built outside of a facility rated to do so. The only way to truly test one of these devices using something like a Portacount under controlled conditions.

Parts Required

This build will require printed parts, purchased parts, and several tools. Here is a picture of all the components used in this build:

DSCF0364 X3

And the assembly diagram can be found here. Note that this assembly calls for version 0.7 of the board.

3D Printed Parts

These parts should be printed at 0.2 spacing:

Table 1. Table Printed Parts
PartQuantityMaterialSupports Required?STL File Location

Knob

1

PETG

No

Knob

Body One Piece (alternative part for Body + Light Panel)

1

Transparent PETG

No

Body One Piece

Plate

1

PETG

No

Plate

MOLLE Strap

1

PETG

No

MOLLE Strap

MOLLE Catch

1

PETG

No

MOLLE Catch

Body

1

PETG

No

Body

Lid

1

PETG

No

Lid

Lid

1

PETG

No

Lid

Light Panel

1

Transparent PETG

No

Light Panel

Bill Of Materials

You will need these components. Prices fluctuate, and so are not included here. Alternative versions can be sourced, and we welcome edits for tested alternatives.

Table 2. Table Bill Of Materials (BOM)
CountDescriptionURLNumber in Package

1

Printed Circuit Board Assembly

PCBA

1

1

2Pack Upgraded 3.5Ah M 12 Battery for Milwaukee 12V Battery Lithium XC M 12B Batteries

Battery

2

3

Washers

Should come with the board

3

3

Nuts

Should come with the board

3

Recommeded Tools

These tools are recommended. URLs are for tools purchased and used in the building of the prototypes:

Table 3. Table Tool List
DescriptionURL

A hex screwdriver for the M4 screws

Hex Screwdriver

A 10mm socket wrench

Socket wrench

Build Instructions

Building this version of the controller is more a matter of ensuring that the Controller Box was printed cleanly and all support material is properly removed.

Attach Light Panel to body (unless using fully transparent one piece body):

DSCF0367 X3
DSCF0369 X3
DSCF0370 X3

Place the printed circuit board assembly battery leads into Plate:

DSCF0372 X3
DSCF0374 X3
DSCF0375 X3

Place the printed circuit board assembly with Plate into the Body:

DSCF0377 X3
DSCF0378 X3
DSCF0381 X3

Place washer over the power port, then finger tighten a hex nut over the same power port to hold the Plate in place:

DSCF0382 X3
DSCF0385 X3
DSCF0387 X3

Put the lid onto the body:

DSCF0389 X3
DSCF0392 X3

Place washer over BNC jack, then finger tighten a hex nut over the same BNC jack:

DSCF0393 X3
DSCF0394 X3
DSCF0395 X3

Place washer over potentiometer, then finger tighten a hex nut over the same potentiometer:

DSCF0397 X3
DSCF0398 X3
DSCF0399 X3
DSCF0400 X3

Use socket wrench to tighten hex nuts into place:

DSCF0402 X3
DSCF0404 X3

Attach 2X MOLLE spacers onto MOLLE strap:

DSCF0408 X3
DSCF0411 X3

Attach and screw MOLLE strap (with spacers) onto lid with M4 screws using a hex screwdriver:

DSCF0416 X3
DSCF0417 X3
DSCF0418 X3

Attach and secure MOLLE Catch onto MOLLE Strap and Lid with M4 screws using hex screwdriver:

DSCF0420 X3
DSCF0421 X3
DSCF0423 X3
DSCF0427 X3

Attach knob onto potentiometer:

DSCF0431 X3
DSCF0432 X3

Insert m12 battery:

DSCF0435 X3

Turn knob to turn on power (it should beep and flash an LED battery level indicator):

DSCF0437 X3
DSCF0438 X3

Test m12 battery controller with fan box by attaching a BNC cable:

DSCF0440 X3

Congratulations! You have built a Tetra PAPRa M12 Controller Box v4 (August 2021)!

DSCF0443 X3
+
Last modified April 16, 2024: Removed PLA from the 3d print options (ce7f382)
\ No newline at end of file diff --git a/v1.1/mask-3m/index.html b/v1.1/mask-3m/index.html index 36dac41..29be311 100644 --- a/v1.1/mask-3m/index.html +++ b/v1.1/mask-3m/index.html @@ -1,4 +1,4 @@ -How to build a PAPRa Mask (June 2022 Version) | PAPRaHow to build a PAPRa Mask (June 2022 Version) | PAPRa
+How to build a PAPRa Mask (June 2022 Version) | PAPRaHow to build a PAPRa Mask (June 2022 Version) | PAPRa
Edit this page Create documentation issue -Create project issue

How to build a PAPRa Mask (June 2022 Version)

How-To guide for building the Tetra PAPRa mask (June 2022 version).

Quick Synopsis

The Tetra Powered Air Purified Respirator requires a Mask component to deliver purified air to the face of the wearer. This mask will be connected to the Fan Box via a CPAP hose. After many rounds of development, we have decided to adopt a 3M 6500 series mask as the final interface to the face of the user. These masks are effecive, cheap, and readily available. Ideally, future work can have a fully open source mask to be used here, but our attempts just aren’t equivalent to this off-the-shelf part.

WARNING: we provide no warranty, implicit or explicit, that this device will work up to an N95 specification, when built outside of a facility rated to do so. The only way to truly test one of these devices using something like a Portacount under controlled conditions.

Parts Required

3D printed Parts

Table 1. Table Printed Parts
PartPart NumberQuantityMaterialSupports required?STL File Location

Right-angle Connector

P-TET-000150

2

PET/PLA

Yes

https://github.com/tetrabiodistributed/papr-print-files/blob/ae647b7905ae6b9a0845f862daef6b815cd362d1/STLs/3M%20Adapter/P-TET-000150_Right_Angle_Hose_Connector.stl

Y Connector

P-TET-000150

1

PET/PLA

No

https://github.com/tetrabiodistributed/papr-print-files/blob/ae647b7905ae6b9a0845f862daef6b815cd362d1/STLs/3M%20Adapter/P-TET-000151_Y_Splitter.stl

Bill of Materials

You will need these components. Prices fluctuate, and so are not included here. Alternative versions can be sourced, and we welcome edits for tested alternatives.

Table 2. Table Bill Of Materials (BOM)
CountDescriptionURLNumber in Package

1

CPAP Hose (possible candidate-- this product is 3 feet, you may want something longer or shorter. Refer to https://github.com/tetrabiodistributed/papra/issues/48 for alternatives)

https://www.amazon.com/Gray-Standard-CPAP-Tubing-foot/dp/B073GBQN73

1, 3ft

2

Stiff Ventilator hosing (999) 22mm

https://hitechmedical.net/products/999-2/

1 length, 200 yards

1

3M 6200 Model Mask

https://www.amazon.com/3M-Respirator-6200-Respiratory-Protection/dp/B007JZ1N00

1

Build Steps

Cut the ventilator hosing into 2 foot lengths.

Place the right-angle parts (P-TET-000150) onto the mask:

MMR5821 L

Note that the part has three different-size teeth to meet:

MMR5823 L

Once in place, the part twists in place:

MMR5824 L

The other right angle part goes into the opposite side:

MMR5825 L

Place the two stiff pieces into the y-connector (P-TET-000151):

MMR5830 L

Connect the CPAP hose in place on the bottom of the Y-connector (P-TET-000151):

MMR5838 L

Connect the other end of the CPAP hose to the other side:

MMR5841 L

The mask is all together:

MMR5845 L

How frequently should I change the filter?

Changing the filter depends on how much you use the device. If you’re using the device where there are a lot of particulates in the air (such as a construction site or a woodshop), you may want to change every few days or so. If you’re using the device where there are less particulates, every two to three weeks should be fine. If the filter material gets dirty or wet, you should change it. The blue layer is intended to be water proof, but we don’t know how much actual water it can take.

My hose is smelling. What can I do about that?

You can clean the hose with a 22mm cleaning brush (like https://www.amazon.com/JAKIA-CPAP-Brush-Cleaning-7inch/dp/B089Q6QH1X). Soap and water should be sufficient. We’ve found that the hose material can begin to smell if exposed to quite a bit of sunlight, such as wearing the PAPR in the desert, and this smell wears off after some time.

-
Last modified April 6, 2024: rename new build guide as v1.1 (7001b01)
\ No newline at end of file +Create project issue

How to build a PAPRa Mask (June 2022 Version)

How-To guide for building the Tetra PAPRa mask (June 2022 version).

Quick Synopsis

The Tetra Powered Air Purified Respirator requires a Mask component to deliver purified air to the face of the wearer. This mask will be connected to the Fan Box via a CPAP hose. After many rounds of development, we have decided to adopt a 3M 6500 series mask as the final interface to the face of the user. These masks are effecive, cheap, and readily available. Ideally, future work can have a fully open source mask to be used here, but our attempts just aren’t equivalent to this off-the-shelf part.

WARNING: we provide no warranty, implicit or explicit, that this device will work up to an N95 specification, when built outside of a facility rated to do so. The only way to truly test one of these devices using something like a Portacount under controlled conditions.

Parts Required

3D printed Parts

Table 1. Table Printed Parts
PartPart NumberQuantityMaterialSupports required?STL File Location

Right-angle Connector

P-TET-000150

2

PETG

Yes

Right-angle Connector

Y Connector

P-TET-000150

1

PETG

No

Y Connector

Bill of Materials

You will need these components. Prices fluctuate, and so are not included here. Alternative versions can be sourced, and we welcome edits for tested alternatives.

Table 2. Table Bill Of Materials (BOM)
CountDescriptionURLNumber in Package

1

CPAP Hose (possible candidate-- this product is 3 feet, you may want something longer or shorter. Refer to https://github.com/tetrabiodistributed/papra/issues/48 for alternatives)

CPAP Hose

1, 3ft

2

Stiff Ventilator hosing (999) 22mm

Stiff Ventilator hosing

1 length, 200 yards

1

3M 6200 Model Mask

Mask

1

Build Steps

Cut the ventilator hosing into 2 foot lengths.

Place the right-angle parts (P-TET-000150) onto the mask:

MMR5821 L

Note that the part has three different-size teeth to meet:

MMR5823 L

Once in place, the part twists in place:

MMR5824 L

The other right angle part goes into the opposite side:

MMR5825 L

Place the two stiff pieces into the y-connector (P-TET-000151):

MMR5830 L

Connect the CPAP hose in place on the bottom of the Y-connector (P-TET-000151):

MMR5838 L

Connect the other end of the CPAP hose to the other side:

MMR5841 L

The mask is all together:

MMR5845 L

How frequently should I change the filter?

Changing the filter depends on how much you use the device. If you’re using the device where there are a lot of particulates in the air (such as a construction site or a woodshop), you may want to change every few days or so. If you’re using the device where there are less particulates, every two to three weeks should be fine. If the filter material gets dirty or wet, you should change it. The blue layer is intended to be water proof, but we don’t know how much actual water it can take.

My hose is smelling. What can I do about that?

You can clean the hose with a 22mm cleaning brush (like Cleaning Brush. Soap and water should be sufficient. We’ve found that the hose material can begin to smell if exposed to quite a bit of sunlight, such as wearing the PAPR in the desert, and this smell wears off after some time.

+
Last modified July 19, 2024: Removed the trailing space as suggested. (00cdbbb)
\ No newline at end of file diff --git a/v1.1/papra-pcba/index.html b/v1.1/papra-pcba/index.html index 5f259b8..aadcf46 100644 --- a/v1.1/papra-pcba/index.html +++ b/v1.1/papra-pcba/index.html @@ -1,4 +1,4 @@ -PAPRa Printed Circuit Board Assembly | PAPRaPAPRa Printed Circuit Board Assembly | PAPRa
+PAPRa Printed Circuit Board Assembly | PAPRaPAPRa Printed Circuit Board Assembly | PAPRa
Edit this page Create documentation issue -Create project issue

PAPRa Printed Circuit Board Assembly

The printed circuit board assembly (thru hole version) for the Tetra PAPRa M12 controller

Quick Synopsis

The following is the board diagram for the M12 controller PCB. Further information can be found in the PAPRA-PCB project.

Warning
we provide no warranty, implicit or explicit, that this device will work up to an N95 specification, when built outside of a facility rated to do so. The only way to truly test one of these devices using something like a Portacount under controlled conditions.

Enter at your own risk.

Bill of Materials

Table 1. Parts needed for the PCBa
SL NoPartGeneric nameSchematic ReferenceQty

01

PCBa House

PCBa Jig

1

02

Kingbright WP710A10SURCK

RED 5v LED

D1 D3 D4 D5 D7

5

03

Yageo MFR-25FRF52-100R

100R resistor

R2 R7 R8 R9

4

04

Yageo MFR-25FRF52-680R

680R resistor

R10

1

05

Yageo MFR-25FRF52-330K

330K Resistor

R4 R5 R11

3

06

onsemi 1N5237B

Zener Diode

D2

1

07

Comchip 1N4004B-G

1N4004B Diode

D6

1

08

TDK FG14X7R1H334KNT06

Ceramic Capacitor 0.33uF

C1

1

09

TDK FG14X7R2A104KNT06

Ceramic Capacitor 0.1 uF

C3

1

10

Yageo MFR-25FRF52-100K

100K Resistor

R1 R3

2

11

Seeed Studio 113991054

Pin Headers and ESP32

U2

2

12

Texas Instruments UA78L05ACLPME3

Voltage regulator

REG

1

13

Panasonic ECA-1CM221

Electrolytic Capacitor

C2

1

14

TE Connectivity / AMP 63952-1

Battery pins

BATT+ BATT-

2

15

CUI Devices PJ-066A

DC connector

H1

1

16

CUI Devices CMI-1210-92T

Buzzer

SG1

1

17

Wurth Elektronik 696108003002

fuse holder

F1

1

18

BI Technologies P091S-FC20BR10K

10K POT

POT1

1

19

TE Connectivity 5227161-9

BNC Connector

H2

1

20

Diodes Inc. DMT6009LCT

MOSFET

Q2 Q3

2

21

Littelfuse 0617005.MXP

Fuse

F1-Holder

1

22

Infineon IRF9Z24NPBF

Q1

1

23

Yageo MFR-25FRF52-100K

R1 R3

2

24

Diodes Inc. DMT6009LCT

MOSFET

Q2 Q3

2

25

Yageo MFR-25-T-52-0R

R6 R12

2

26

Samtec TSW-107-06-T-S

Q1U2-Headers

2

27

TE Connectivity 1-329632-2

For the BNC Connector (H2)

1

28

TE Connectivity 1-329631-2

For the BNC Connector (H2)

1

29

Amphenol RF 112517

1

Table 2. 3D Printed Tools
PartQuantityMaterialSupports required?STL File Location

Tetra-PCB-jig-v3

1

PLA/PETG

No

https://github.com/tetrabiodistributed/papr-print-files/blob/d0c51e8a21a43540b39c50ecf9295a17e224a93b/STLs/Tetra-PCB-jig-v3.stl

Build instructions

Download the PCB Jig STL from Github and print it.

420

The larger gaps are to aid the positioning of the battery terminals.

Place the board on the PCB Jig. The markings should be upside down.

Insert the LEDs with the Anode facing away from the test points.

Insert the LEDS in the D1, D3, D4, D5 and D7

420

Flip the Board carefully and align the LEDs with the holes in the jig -Push them into place until they touch the work surface.

420

Solder them carefully in place.

420

Snip the excess to make the bridging links

420

Bend the wire using the Bending slots in the left side of the Jig.

420

Solder the R6 and R12 with the wire.

420

Place the 100R Resistor in the R2 and solder it.

420

Place the 100R Resistors in the R7, R8, R9 and solder them.

100r resistors M

Place the 680R resistor in the R10 and solder it.

Screenshot%20from%202024 03 22%2023 19 44 M

Place 100K Resistor in the R3 and solder it.

Screenshot%20from%202024 03 22%2023 21 21 M

Place the 330K Resistor and solder it.

Screenshot%20from%202024 03 22%2023 22 43 M

Place the 330K Resistor in R5 and solder it.

Screenshot%20from%202024 03 23%2008 01 18 M

Place the 330K Resistor in R11 and solder it.

Screenshot%20from%202024 03 23%2008 03 08 M

Place Zener Diode in place in D2 and solder it.

Screenshot%20from%202024 03 23%2008 08 30 M

Place the 1N4004B Diode in D6 and solder it.

Screenshot%20from%202024 03 23%2008 09 41 M

Place the Ceramic Capacitor 0.33uF in C1 and solder it.

Screenshot%20from%202024 03 23%2008 12 09 M

Place the Ceramic Capacitor 0.1 uF in the C3 and solder it.

Screenshot%20from%202024 03 23%2008 14 04 M

Place 100K resistor in the R1 and solder it.

Screenshot%20from%202024 03 23%2008 15 47 M

Place the Pin Headers and ESP32 in the U1 and solder it.

Screenshot%20from%202024 03 23%2008 17 04 M

Make sure none of the pads are bridged.

Screenshot%20from%202024 03 23%2008 18 41 M

Place Voltage regulator in REG and solder it.

Screenshot%20from%202024 03 23%2008 20 13 M

Place the Electrolytic Capacitor AMP 63952-1 in the C2.

Screenshot%20from%202024 03 23%2008 22 05 M

Place the battery terminals in the larger gaps.

Screenshot%20from%202024 03 23%2008 25 43 M

Solder the terminals carefully.

Screenshot%20from%202024 03 23%2008 27 11 M

Place the DC connector in the H1 and solder it.

Screenshot%20from%202024 03 23%2008 29 44 M

Place the Buzzer in the SG1 and solder it.

Screenshot%20from%202024 03 23%2008 30 43 M

Place the fuse holder and solder it.

Screenshot%20from%202024 03 23%2008 32 34 M

Place the 10K POT and solder it.

Screenshot%20from%202024 03 23%2008 34 25 M

Place the BNC Connector in the H2 and solder it.

Screenshot%20from%202024 03 23%2008 36 16 M

Place the MOSFET in Q1, Q2 and Q3 and solder them.

Screenshot%20from%202024 03 23%2008 41 16 M

Place the Fuse in the fuse holder.

Screenshot%20from%202024 03 23%2008 42 17 M

Flashing firmware

Instructions for flashing firmware can be found here: https://github.com/tetrabiodistributed/papra-pcba-firmware

-
Last modified April 6, 2024: add link to firmware repo at end of papra-pcba build guide (42168c2)
\ No newline at end of file +Create project issue

PAPRa Printed Circuit Board Assembly

The printed circuit board assembly (thru hole version) for the Tetra PAPRa M12 controller

Quick Synopsis

The following is the board diagram for the M12 controller PCB. Further information can be found in the PAPRA-PCB project.

WARNING:we provide no warranty, implicit or explicit, that this device will work up to an N95 specification, when built outside of a facility rated to do so. The only way to truly test one of these devices using something like a Portacount under controlled conditions.

Enter at your own risk.

Bill of Materials

Table 1. Parts needed for the PCBa
SL NoPartGeneric nameSchematic ReferenceQty

01

PCBa House

PCBa Jig

1

02

Kingbright WP710A10SURCK

RED 5v LED

D1 D3 D4 D5 D7

5

03

Yageo MFR-25FRF52-100R

100R resistor

R2 R7 R8 R9

4

04

Yageo MFR-25FRF52-680R

680R resistor

R10

1

05

Yageo MFR-25FRF52-330K

330K Resistor

R4 R5 R11

3

06

onsemi 1N5237B

Zener Diode

D2

1

07

Comchip 1N4004B-G

1N4004B Diode

D6

1

08

TDK FG14X7R1H334KNT06

Ceramic Capacitor 0.33uF

C1

1

09

TDK FG14X7R2A104KNT06

Ceramic Capacitor 0.1 uF

C3

1

10

Yageo MFR-25FRF52-100K

100K Resistor

R1 R3

2

11

Seeed Studio 113991054

Pin Headers and ESP32

U2

2

12

Texas Instruments UA78L05ACLPME3

Voltage regulator

REG

1

13

Panasonic ECA-1CM221

Electrolytic Capacitor

C2

1

14

TE Connectivity / AMP 63952-1

Battery pins

BATT+ BATT-

2

15

CUI Devices PJ-066A

DC connector

H1

1

16

CUI Devices CMI-1210-92T

Buzzer

SG1

1

17

Wurth Elektronik 696108003002

fuse holder

F1

1

18

BI Technologies P091S-FC20BR10K

10K POT

POT1

1

19

TE Connectivity 5227161-9

BNC Connector

H2

1

20

Diodes Inc. DMT6009LCT

MOSFET

Q2 Q3

2

21

Littelfuse 0617005.MXP

Fuse

F1-Holder

1

22

Infineon IRF9Z24NPBF

Q1

1

23

Yageo MFR-25FRF52-100K

R1 R3

2

24

Diodes Inc. DMT6009LCT

MOSFET

Q2 Q3

2

25

Yageo MFR-25-T-52-0R

R6 R12

2

26

Samtec TSW-107-06-T-S

Q1U2-Headers

2

27

TE Connectivity 1-329632-2

For the BNC Connector (H2)

1

28

TE Connectivity 1-329631-2

For the BNC Connector (H2)

1

29

Amphenol RF 112517

1

Table 2. 3D Printed Tools
PartQuantityMaterialSupports required?STL File Location

Tetra-PCB-jig-v3

1

PETG

No

PCB Jig

Build instructions

  • Download the PCB Jig STL from Github and print it.

420

The larger gaps are to aid the positioning of the battery terminals.

  • Place the board on the PCB Jig. The markings should be upside down.

  • Insert the LEDs with the Anode facing away from the test points.

  • Insert the LEDS in the D1, D3, D4, D5 and D7

420

  • Flip the Board carefully and align the LEDs with the holes in the jig +Push them into place until they touch the work surface.

420

Solder them carefully in place.

420

Snip the excess to make the bridging links

420

Bend the wire using the Bending slots in the left side of the Jig.

420

Solder the R6 and R12 with the wire.

420

Place the 100R Resistor in the R2 and solder it.

420

Place the 100R Resistors in the R7, R8, R9 and solder them.

100r resistors M

Place the 680R resistor in the R10 and solder it.

Screenshot%20from%202024 03 22%2023 19 44 M

Place 100K Resistor in the R3 and solder it.

Screenshot%20from%202024 03 22%2023 21 21 M

Place the 330K Resistor and solder it.

Screenshot%20from%202024 03 22%2023 22 43 M

Place the 330K Resistor in R5 and solder it.

Screenshot%20from%202024 03 23%2008 01 18 M

Place the 330K Resistor in R11 and solder it.

Screenshot%20from%202024 03 23%2008 03 08 M

Place Zener Diode in place in D2 and solder it.

Screenshot%20from%202024 03 23%2008 08 30 M

Place the 1N4004B Diode in D6 and solder it.

Screenshot%20from%202024 03 23%2008 09 41 M

Place the Ceramic Capacitor 0.33uF in C1 and solder it.

Screenshot%20from%202024 03 23%2008 12 09 M

Place the Ceramic Capacitor 0.1 uF in the C3 and solder it.

Screenshot%20from%202024 03 23%2008 14 04 M

Place 100K resistor in the R1 and solder it.

Screenshot%20from%202024 03 23%2008 15 47 M

Place the Pin Headers and ESP32 in the U1 and solder it.

Screenshot%20from%202024 03 23%2008 17 04 M

Make sure none of the pads are bridged.

Screenshot%20from%202024 03 23%2008 18 41 M

Place Voltage regulator in REG and solder it.

Screenshot%20from%202024 03 23%2008 20 13 M

Place the Electrolytic Capacitor AMP 63952-1 in the C2.

Screenshot%20from%202024 03 23%2008 22 05 M

Place the battery terminals in the larger gaps.

Screenshot%20from%202024 03 23%2008 25 43 M

Solder the terminals carefully.

Screenshot%20from%202024 03 23%2008 27 11 M

Place the DC connector in the H1 and solder it.

Screenshot%20from%202024 03 23%2008 29 44 M

Place the Buzzer in the SG1 and solder it.

Screenshot%20from%202024 03 23%2008 30 43 M

Place the fuse holder and solder it.

Screenshot%20from%202024 03 23%2008 32 34 M

Place the 10K POT and solder it.

Screenshot%20from%202024 03 23%2008 34 25 M

Place the BNC Connector in the H2 and solder it.

Screenshot%20from%202024 03 23%2008 36 16 M

Place the MOSFET in Q1, Q2 and Q3 and solder them.

Screenshot%20from%202024 03 23%2008 41 16 M

Place the Fuse in the fuse holder.

Screenshot%20from%202024 03 23%2008 42 17 M

Flashing firmware

Instructions for flashing firmware can be found here: https://github.com/tetrabiodistributed/papra-pcba-firmware

+
Last modified July 19, 2024: Edited warning in PAPRa PCB text in index (04f112a)
\ No newline at end of file